Tecno Azzurra MIX 5x10 (10 m)

Kabina lakierniczo - suszarnicza Azzurra

Sąlyga: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, aukščio reguliavimo tipas: elektrinis, galia: 7,5 kW (10,20 AG), Tilting Spindle Moulder HOFMANN TFS 107 Standard Equipment: 7.5 kW motor, 400 V, 50 Hz Table size: 1,200 x 815 mm, heavily ribbed cast iron table with table rings Electronic soft start and braking device Electric height and tilt adjustment, both rapid and fine feed Height adjustment precise to 0.1 mm, adjustment range approx. 145 mm Kodpfx Adou Nz Ndsksnd Tilting range +/- 45.5° 4 spindle speeds: 3,000/4,500/6,000/9,000 rpm Spindle fence type 2601 Efficient with multiplex fence jaws Fixed milling spindle Ø 30 mm with quick-clamping nut “fix” Left/right rotation, machine socket, ring-guard type TAPOA, Hofmann “Centrex” Paint finish: grey white/signal blue Electrical connection rating: Motor output 7.5 kW – minimum fuse protection (A) slow-blow 30 Additional equipment on this machine: - Table size 2,000 x 815 mm with extendable support by 480 mm, instead of standard table - Stepless variable speed control TFS 107 from 1,500 to 10,000 rpm incl. 7.5 kW motor, instead of standard soft start motor - HOFMANN spindle fence type 2620 instead of standard fence 2601 Efficient Total adjustment via handwheel with indicator including switching to tool zero position. Digital readout for individual jaw adjustment. Includes quick-clamping system for fence jaws - 2 cast iron fence jaws 500/500 mm - Guide rails and profiling board, consisting of 5 rulers, 1 profiling board, 10 sliding blocks - Raised control panel - Tool compartment for TFS 107 (only possible with raised panel) - Operating manual TFS 107 in German

Sąlyga: labai geros būklės (naudotas), a truly unique item, approx. 12 x 6 m Kjdjfi Tmcspfx Adksnd

Sąlyga: naudotas, Gamybos metai: 1980, Drilling capacity in steel (diameter): 23 mm X-travel: 400 mm y-travel: 285 mm Total power requirement: 3 kW Machine weight approx.: 1,400 kg Space requirement approx.: [missing dimension] Brand: ACIERA (Switzerland) Semi-automatic precision drilling and milling machine with BREGNARD coordinate table Model: 23 TR 50 Year: approx. 1980 #36586 X-axis (longitudinal): 400 mm Y-axis (transverse): 285 mm Z-axis (vertical, quill): 120 mm Kodet Hw Sbopfx Adksnd W-axis (drill head slide): 470 mm Table size: 520 x 410 mm Min./max. distance vertical spindle to table top: 230 / 700 mm Table cross adjustment approx.: 280 mm Drill spindle overhang approx.: 270 mm Spindle speeds (continuously, 2 ranges): 45 – 4,000 rpm Spindle taper: SF 32 Drilling capacity in steel: 23 mm Feed rates: 0.1/0.04/0.02 mm/rev and 0.6/0.25/0.12 mm/rev Workpiece weight approx.: 300 kg Spindle drive: 2.5 kW Total drive approx.: 3 kW, 400 V, 50 Hz Weight approx.: 1,400 kg Accessories / Special equipment: • BREGNARD precision coordinate table TR 50 for X/Y axes, with pneumatic rapid traverse via hand control; longitudinal travel 400 mm, transverse travel 285 mm • Automatic drilling feed with automatic shut-off, simple depth stop • Electric control panel with buttons for rapid adjustment of drill slide, shut-off at uppermost quill position, etc. • Multiple tool holders with special taper receptacle, clamping devices, drill chucks • Built-in coolant system, central lubrication, fold-away chip guard • Machine light Condition: good – ready for demonstration; ideal machine for single-piece or small batch production; very robust build Delivery: ex-stock – as inspected Payment: net, upon receipt of invoice

Sąlyga: reikia remonto (naudotas), HOT PLATEN HYDRAULIC PRESS, MODEL LS/L/R 30/13 PLATEN THICKNESS 150 mm Kjdpfxjn R Dihj Adkend Configuration - LOADER - HOT PLATEN HYDRAULIC PRESS, MODEL LS/L/R 30/13 PLATEN THICKNESS 150 mm - UNPOWERED ROLLER UNLOADER, 3000x1300 mm Press platen dimensions: 3000x1300 mm Pressing cylinders: No. 6, Ø 70 mm, stroke 200 mm Pressing force: 70 tons

Sąlyga: naujas, Holzkraft minimax t 45c spindle moulder (5502044) Affordable, with fixed spindle and cast iron worktable. - Robust steel and cast iron construction - Equipped with fixed spindle - 3 spindle speeds from 3500 to 10000 rpm - Spindle with forward/reverse rotation - Large dimension cast iron milling unit, mounted directly on the table - Extraction hood below the worktable for improved dust extraction - Solid and precise cast iron table - Fast and effortless speed change - Powerful 5.0 kW motor - Standard supplied curved guard cover - Quality Made in Italy Equipment Details Cast iron milling unit - Mounted directly to the table - Spindle supported high up with precision ball bearings, resulting in minimal bearing load and maximum service life - 3 milling speeds from 3500 to 10000 rpm Powerful Motors - Fitted with high-performance three-phase motor Spindle Guard The standard spindle guard is equipped with a height-adjustable guide rail and protective plate for maximum safety as standard. Spindle Fence - Precise fence with quick adjustment and fine adjustment via scale on the fence jaw - Integrated extraction port ensures clear visibility Table Opening - Large table opening also allows the use of larger raised panel cutters and tenoning or slotting tools both above and below the table Curved Guard Cover - Included as standard Reversible Fence Jaws - Versatile fence for bridging the tool gap - Enables safe operation even with narrow workpieces Accessories HOLZKRAFT safety system fence jaws, adjustable - Optimal protection on any spindle moulder, individually adjustable for any task - Universal base elements for mounting AIGNER safety and work devices - Quick adjustment by simultaneous clamping of all individually movable bars - High-quality aluminium construction - Universally usable on all HOLZKRAFT spindle moulders - 500 mm: Art. No. 5851000 - 650 mm: Art. No. 5851650 TECHNICAL DATA Dimensions and Weights Weight (Net) approx.: 240 kg Extraction Connection Extraction port diameter: 2 x 120 mm Working Table Table length: 1000 mm Table width: 575 mm Table height: 900 mm Installation Details Required floor space length: 1945 mm Required floor space width/depth: 920 mm Note on required space: The dimensions take into account maximum working ranges or usable lengths. Machine body length: 1000 mm Machine body width/depth: 575 mm Working area length: 1600 mm Working area width/depth: 1600 mm Note on working area: Add the indicated measurements to the required floor space for the recommended free installation area for the machine. Electrical Data Supply voltage: 400 V Supply frequency: 50 Hz Main drive motor output: 5.0 kW Spindle Usable spindle length: 100 mm Max. spindle projection above table: 130 mm Kodokyt Ulepfx Adkond Spindle speed(s): 3500/7000/10000 rpm Spindle shaft diameter: 30 mm Milling Tool Max. Diameter Max. diameter (retractable): 180 mm Max. profiling diameter: 210 mm SCOPE OF DELIVERY - Curved guard cover - Aluminium fence jaws Holzkraft specialist dealer – accessories available on request!

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Įvairūs transportavimo ratukai, pavyzdžiui, dirbtuvėms, įrankių vežimėliams, suvirinimo vežimėliams, vielos padavimui ir daugeliui kitų naudojimo paskirčių; skirtingų dydžių ir montavimo aukščių; su įvairiomis apkrovomis; ratukų kainos pagal užklausą; ratukai gali būti parduodami po vieną arba keliomis dalimis; galimi netikslumai; papildomus klausimus ar informaciją suteiksime el. paštu. Kjdper H D Ugefx Adksnd

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2025, Hauptantrieb Presskraft: 1200 kN Knjdpfx Aewvm Rbodkod Zusätzliche Ausstattung Mylarfolie an oberen und unteren Pressplatten angebracht Elektronische Ebenheitskontrolle (EFC) zum Schutz bei unsachgemäßer Beladung Diese ITALPRESSE XL/6 30-13 PM BO Furnierpresse wurde im Jahr 2025 hergestellt. Nutzen Sie die Gelegenheit, diese ITALPRESSE XL/6 30-13 PM BO Furnierpresse zu erwerben. Kontaktieren Sie uns für weitere Informationen. Anwendungsbereiche Pressen / Laminieren

Sąlyga: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 3 200 mm, Y ašies eiga: 1 600 mm, Z ašies eigos atstumas: 200 mm, padavimo ilgis X ašis: 3 200 mm, padavimo eiga Y ašimi: 1 600 mm, X ašies padavimo greitis: 70 m/min, Y ašies padavimo greitis: 70 m/min, padavimo greitis Z ašis: 25 m/min, valdiklių gamintojas: Syntec, valdiklio modelis: SYNTEC, Įranga: dokumentacija / vadovas, drožlių transporteris, sūkių greitis be galo kintamas, Darbo lauko kaina: 2600x1300 € 48 500,- CNC NESTING FREZAVIMO STAKLĖS CNC apdirbimo centras Pagaminimo metai 2025 9 kW ATC frezavimo galva Įrankių keitimo sandėlis 16 pozicijų (priklausomai nuo modelio) Multi-gręžimo galva (pasirinktinai) 7 vertikalūs grąžtai 8 horizontalūs grąžtai 1 griovelio pjūklas X ašyje 1 griovelio pjūklas Y ašyje Programinė įranga Professional Pegasus Darbo laukai X ašis: 2.600-3.200-4.200-5.200-6.000 mm Kodpfx Aetty Ahedkend Darbo laukas Y ašis: 1.300-1.600-2.100 mm Darbo laukas Z ašis: 200 mm Vakuuminis siurblys Becker VTLF2.250 5,5 kW Omron saugos šviesos užuolaida Centrinis automatinis tepimas Ištraukimo prijungimo diametras Ø150-200 mm CAD CAM - programavimas Pegasus Professional Palaiko bet kokio formato programas: Adobe Illustrator, DXF, ESP, PLT, TXT. Speciali nesting funkcija

Sąlyga: naudotas, Gamybos metai: 2001, Funkcionalumas: visiškai funkcionalus, pjūklo disko skersmuo: 450 mm, pjovimo aukštis (maks.): 100 mm, pjovimo plotis (maks.): 245 mm, darbinio aukščio: 100 mm, įvesties srovės tipas: trifazis, – Year of manufacture: 2001 – Optimization Knodpfxjwtzrhs Adkjd – Cross-cutting – The machine is equipped with additional tables, allowing for a maximum cutting length of up to 6,500 mm (currently set to 3,400 mm) – 8 cutting lists TECHNICAL SPECIFICATIONS: – Maximum cutting length: 6,500 mm (currently 3,400 mm) – Minimum workpiece length: 300 mm – Maximum cutting height: 100 mm – Maximum cutting width: 245 mm – Saw blade diameter: 450 mm – Motor power: 9 kW – Maximum feed speed: 120 m/min – Acceleration: 10 m/s² – Length and value-based optimization – Pneumatic material clamping – Five ejectors – Intelligently controlled waste chute – Vario Speed system – Total machine length: 17,500 mm – Transport dimensions (L/W/H): 800 / 245 / 220 cm – Weight: 3,500 kg

Sąlyga: labai geros būklės (naudotas), Catalogue number 6338 TECHNICAL DATA - Max. workpiece width: 230 mm - Max. workpiece height: 160 mm 7 spindles: 1) Lower horizontal 230 mm, 5.5 kW 2) Right vertical 160 mm, 5.5 kW 3) Left vertical 160 mm, 5.5 kW 4) Upper horizontal 230 mm, 7.5 kW 5) Upper horizontal 230 mm, 7.5 kW 6) Lower horizontal 230 mm, 7.5 kW 7) Universal 360°, 230 mm, 7.5 kW - All spindles adjustable up/down, left/right - Spindle diameter: 40 mm - All spindles equipped with brakes - Spindle speed: 6000 rpm From above: - 6 feed rollers, toothed, metal, including 2 double rollers - 4 outfeed rollers, rubber, including 1 double roller - 3 outfeed pressure units From below: - Lateral pressure at infeed - Infeed roller, toothed, driven, swivelling in bottom table - 3 feed rollers, metal, smooth - Pneumatically adjustable rollers - Infeed table length: 1190 mm - Centralized table lubrication - Electric thickness adjustment - Body lifting motor: 0.56 kW - Infinitely variable feed speed via inverter: 6-24 m/min - Feed motor: 3.7 kW - Feed shafts driven by cardan shafts - Enclosed in cabin - Extraction port diameter: 7 x 125 mm - Dimensions (L/W/H): 5100 x 2070 x 1900 mm - Weight: approx. 5000 kg ADVANTAGES Knsdpfohp N R Iex Adkod – 7-head machine – Universal spindle – Ideal for wet and dry wood – Spindles fitted with brakes - Technical documentation (DTR) – Used planer, very good condition Net price: 149,900 PLN Net price: 35,690 EUR (depending on the exchange rate 4.2 EUR) (Prices may vary in case of significant exchange rate fluctuations)