Rankovių nustatymo mašina

JUKI DP-2100

Būklė: labai geros būklės (naudotas), Gamybos metai: 2007, veikimo valandos: 53 000 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 206432, spaudimo jėga: 2 000 kN, varžto skersmuo: 50 mm, tarpas tarp stulpų: 570 mm, darbinio tūrio: 392 cm³, įpurškimo slėgis: 2 000 juosta, išstūmimo eiga: 225 mm, bendras svoris: 7 450 kg, Įranga: dokumentacija / vadovas, Here we, as a dealer in injection moulding machines, offer the following well-maintained used injection moulding machine for sale. Of course, we also purchase well-maintained injection moulding machines built from 2010 onwards. We have been wholesalers of used injection moulding machines for over 25 years. Current information – Tax notice and advantage for used machinery: From 01.07.2025, used machines can also benefit from a special depreciation of 30% per year for tax purposes. Manufacturer: Arburg Model: 520C 2000-800 GE Serial number: 206432 Year of manufacture: 2007 Operating hours: approx. 53,000 Control system: Selogica Dimensions (LxWxH): 5.53 x 1.80 x 2.20 m Weight: 7,450 kg Fully functional Condition: Very well maintained – German origin Extras: - Complete 50 mm highly wear-resistant thermoplastic cylinder - Screw in HC version instead of standard - Selogica direct control - Hydraulic system with two variable delivery pumps - GOLDEN EDITION anniversary model - Thermoplastic processing - 50 mm open nozzle - Extended 50 mm nozzle tip Guodew Tt R Ispfx Af Dja - Heating band for open nozzle - Heating band for extended nozzle tip - 570 central clamping plate configuration, ⌀ 125 mm - Two air-blast units with pressure regulator - Connection for air-blast unit 1 - Connection for separating unit - Core pull 1 for serial movement, holding pressure via check valve - Conveyor belt connection via 5-pin socket - Interface for robot system (EUROMAP 67), 50-pin - Interface for ARBURG host computer - Socket distributor: 1 CEE, 1 Schuko additional - Serial printer interface USB - CompactFlash interface for data storage - Operator authorisation via chip card according to EUROMAP 65 - 1 additional heating circuit for nozzle or adapter with socket - Interface for colouring unit - Manual adjustment for free cooling circuits - Machine-specific cooling circuits controlled - Equipment package: advanced monitoring - Equipment package: extended movement - Equipment package: production control - Equipment package: optimisation / operator assistance - Equipment package: quality assurance - Equipment package: documentation Complete documentation available Injection unit: Screw diameter: 50 mm Injection weight: 359 g/PS Injection pressure: 2000 bar Injection volume: 392 cm³ Clamping unit: Clamping force: 200 t / 2000 kN Tie-bar clearance: 570 x 570 mm Mounting plates: 795 x 795 mm Tool installation height: 300 mm Max. plate distance: 950 mm Opening stroke: 650 mm Ejector stroke/force: 225 mm / 66 kN Clamping system: hydraulic Motor power: 22 kW Heating power: 19.9 kW / 8 heating zones Total connected load: 45 kW The machine is immediately available at our warehouse in Hannover, Germany, and has been tested. Warranty: Warranty valid until initial commissioning Loading/Shipping: Free loaded onto the buyer’s truck, or free house delivery for transport reimbursement, available ex stock Hannover, Germany A summary of our machines and company: - We only sell machines we have purchased from ongoing production, available from our warehouse in Hannover - All machines are inspected and tested before dismantling - We do NOT sell insolvency assets – we are NOT brokers trading with third-party property - All machines come from successful companies that have given them proper maintenance and care - All machines offered can be viewed at our warehouse

Būklė: geras (naudotas), 50 Stück auf Lager, viele Modelle verfügbar Godpfxolif N Is Af Dsua

Gamybos metai: 2011, būklė: paruoštas naudoti (naudotas), The ultrafiltration unit is used for cleaning various liquids. The membrane elements feature a 37/3.8 channel design, with a fineness of 0.1µm and a length of 1300 mm. Each of the two modules is equipped with 32 ceramic rods, providing a capacity of 2,000 L/h per module. Gsdpfxef Dc D Hj Af Dsua 1 construction frame, 1 feed pump, 1 rod heater, 2 bleed pumps, 1 cleaning tank, 1 membrane valve, 1 compressed air diaphragm pump, 1 UF ceramic module, 1 temperature monitoring unit, 1 control valve, 4 pressure gauges with display, 1 control panel according to VDE 0110/0113 CE, 1 flow meter, 1 pre-assembly of the unit at the supplier’s factory.

Gamybos metai: 2008, būklė: geras (naudotas), Industrinis nerūdijančio plieno oro drėkintuvas, garo generatorius Išorinis įrenginys 4x8 kW šildymo elementai, 32 kW maks. 160 °C Gusdpfx Afefl Iqus Doa

Būklė: geras (naudotas), Gamybos metai: 1989, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: AN-No.: 88.04.017 D, 8 units of very clean (refurbished) Jakob Müller Frick AG weaving looms NF42 from 1988, 1989, and 1990 available from my stock. All machines are running smoothly and are 100% operational (completely overhauled). Each machine has 12 shafts, is supplied without creel, and comes with Mütrans, some also with Müdata. 1 unit NF 2/84mm from 1989 for €6,900 Stock no.: 88.04.017 D, with Müdata and Mütrans, 16 shafts 3 units NF 2/84mm overhauled from 1990, each at €6,500 Stock no.: 90.01.704 B Stock no.: 90.01.755 A Stock no.: 90.01.229 A 1 unit NF 2/84mm overhauled from 1989 for €6,500 Stock no.: 89.00.118 D 3 units NF 2/84mm overhauled from 1988, each at €6,500 Stock no.: 88.04.244 A Stock no.: 88.02.758 A Stock no.: 88.02.758 B The machines originate from a curtain tape production and were originally equipped with a Z compartment. They have been converted to standard compartments as part of the general overhaul. All tension beams and pressure rollers have been newly vulcanized by Westland. The card rollers in the chain case are also new or have been newly vulcanized. The central lubrication unit in the chain case has been optimized by us. All machines have the first shaft position free (for heavier reeds) and are fitted with 12 shafts. All machines are equipped with Mütrans II. Gjdpfx Asr Ix Igof Doua Machines can optionally be supplied with double belt take-off (for heavy fabrics). This is possible for 4–5 machines, as far as I know. It is also possible to equip them with fine-knurled tension beams, also for 4–5 machines. All needle holders are suitable for double needles. Two additional Mütrans II systems can be fitted upon request for this purpose. The machines have been completely rebuilt. All bearings, shafts, and bushings have been checked and replaced if necessary. All swing arms have been inspected and replaced as needed. Configuration installed: 1st shaft position free (spacer block fitted) 2nd and 3rd shaft: swing arm 201 4th–6th shaft: swing arm 202 7th–9th shaft: swing arm 203 10th–12th shaft: swing arm 204 13th shaft: swing arm 205 All heald springs have been checked and replaced as required, with none being brittle, cracked, or defective. The electrical installation has been checked, the thread monitoring board has been inspected and repaired or replaced as necessary. All machines are painted in RAL 6021 Müller pale green. All covers are clean and undamaged. The machines are offered without Müdata. Four of the machines are also fitted with crawl (crawler) gear. All machines have been set up and tested. The machines are delivered without oil, weft threads, slats, reeds, needles, or chain links. Delivery is on Euro pallet, FOB Wuppertal.

Būklė: geras (naudotas), Gamybos metai: 1999, veikimo valandos: 95 239 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 173937, spaudimo jėga: 2 000 kN, varžto skersmuo: 55 mm, tarpas tarp stulpų: 520 mm, formos aukštis (min.): 250 mm, bendras ilgis: 5 100 mm, bendras plotis: 1 800 mm, bendras aukštis: 2 200 mm, bendras svoris: 6 630 kg, Įranga: dokumentacija / vadovas, The machine was operating flawlessly up until the day before the arrival of the new machine. Therefore, it is in good used condition. The machine is being sold due to lack of space in the injection molding area and is no longer powered. The pump, injection unit, and clamping unit are all leak-free. The machine manual is available, and videos of the machine are available on request. Gsdpfx Aev D Nxljf Doua Pump operating hours: 95,239 Automatic operating hours: 86,082 Repairs in recent years: - Filter changed annually - 05/2024: Fan in the control cabinet replaced - 07/2023: New valve for Y201 and Y210 nozzle forward/backward - 02/2023: New keypad installed. Panel with motor and heating - 12/2022: Ejector sealed. Injection unit sealed, including new piston

Būklė: paruoštas naudoti (naudotas), shaker automatic Godpfx Aju I N Ekef Doua

Būklė: geras (naudotas), Maždaug 96 m dviejų vėžių bėgių sistema, išimta iš uždarytos mėsos perdirbimo gamyklos. Guedpfoq Ii S Eex Af Dja

Būklė: naujas, Gamybos metai: 2025, Dviguba adata, triguba transportavimo siuvimo mašina 10 mm Gsdpfxowi Iy Dj Af Djua 8000 EUR be PVM ir pristatymo išlaidų *taip pat galima įsigyti 6 mm - 8 mm - 10 mm versijas* su: - siūlo nukirpimo funkcija - bartack dygsnio funkcija - greitas siuvimo eiga - kojinis svirtis - LED siuvimo šviestuvas - 12 mm dygsnio ilgis - servovariklis su valdymo pultu - adatų atstumas 10 mm Komplekte su stovu ir stalu Merhaletex siuvimo mašina Merhaletex veikia jau daugiau nei 20 metų ir visada yra šalia savo klientų. Tai yra mūsų stiprybė. Galime pasiūlyti visą programą ir pritaikyti mašiną pagal jūsų darbo poreikius. Žinoma, mūsų paslaugos nesibaigia tik siuvimo mašinos pristatymu. Mes taip pat padėsime po pardavimo. Naujos ir naudotos pramoninės siuvimo mašinos Dėl visos informacijos prašome susisiekti su mumis. NIEKUR NEPIRKSITE PIGIAU NEI PAS MERHALETEX Superkame ir parduodame naujas bei naudotas pramonines siuvimo mašinas Skelbimas buvo automatiškai išverstas, galimi vertimo netikslumai.

Gamybos metai: 1995, būklė: paruoštas naudoti (naudotas), An assembly line comprising three (3) Zevatech/Juki pick-and-place machines, one (1) Zevatech/Juki tray changer, and one (1) DEK screen printer is available. 1) 2x Zevatech/Juki FS730, year of manufacture: 1995, maximum placement rate: 3,000 components/hour, placement modules: 4, placement accuracy: +/-0.01mm, changeover time: 0.7s–1.1s. 2) Zevatech/Juki FM740, year of manufacture: 1997, maximum placement rate: 10,000 components/hour, placement accuracy: +/-0.05mm, PCB dimensions X/Y: 400mm/350mm, feeder inputs: 80/8mm, placement modules: 2. 3) Zevatech/Juki TR4NEZ tray changer, year of manufacture: 1995. 4) SMD screen printer DEK 265, year of manufacture: 1995, printing process: stencil printing, max. PCB size: 450mm/340mm, printing accuracy at 6 Sigma: +/-12.5µm, max. PCB thickness: 6mm, dimensions X/Y/Z: approx. 1400mm/1600mm/1500mm, weight: approx. 900kg. All machines form a complete line and are controlled via the same PC. The screen printer's front squeegee axis amplifier board is defective. Documentation available. Gedpfx Afotz Di Ne Doua