Lazerinio pjaustymo mašinos

IPG, MaxPhotonics, Raycus...Fiber Cable

Sąlyga: naujas, DESCRIPTION DM100 Z2C – performs edge rounding and removes sharp burrs on both the inner and outer edges of steel, stainless steel, or aluminum parts after laser, shear, or punch separation of metal components ranging in size from 50 x 50 mm up to 1100 x 100 mm. The first station processes the products by means of a contact roller (approx. 55° Shore) with an abrasive belt, removing heavy burrs in the initial step. The second station processes the products with two counter-rotating cross belts from both below and above. The cross belts round the edges of the workpieces on both inner and outer sides. A major advantage is the deburring of products with protective surface film, as only the edges are processed without damaging the film. Technical Data - DM1100 Z2C: Ncodpfx Afed Ixade Ijl Working capacity (Ø mm): 1100 x 100 Number of belt stations (Z): 1 Number of cross belt stations: 2 Abrasive belt dimensions (mm): 1100 x 2200 Abrasive belt speed (m/s): 8–22 Cross belt speed (m/s): 2–8 Feed speed (m/s): 0.6–3.2 Abrasive belt motor per head (kW): 18.5 Cross belt motor (kW) (2x): 3 Feed motor (kW) (3x): 0.18 Total power (kW): 33 Power consumption (A): 62 Extraction port per head (Ø mm): 150 + 185 Dimensions (mm): 3600 x 2330 x 2350 Weight (kg): 5000

Sąlyga: naujas, DM1100 2C – Edge Rounding Machine for Laser, Flame-Cut, and Punched Parts. NEW DESIGN – CAN BE VIEWED UNDER POWER – IMMEDIATELY AVAILABLE FROM STOCK Ncsdpsd Ev Upjfx Af Iol The DM1100 2C rounds the upper and lower edges of metal parts from a minimum size of 150 mm up to a length of 1100 mm in a SINGLE PASS. The first station processes the workpieces from below using two counter-rotating cross belts, while the second station works from above, also with two counter-rotating cross belts. The cross belts allow deburring of both inner and outer edges of the workpieces. Sharp edges produced during laser cutting, punching, or shearing of steel, stainless steel, and aluminum parts are removed. Simultaneous processing of both sides of laser-cut or punched metal parts saves time and reduces production costs. Another advantage of the DM1100 2C is its capability to process small parts from 50 mm. By folding up a table, the rotating direction of the upper conveyor automatically reverses, and the gap of the first processing station is bridged, enabling the workpieces to feed directly into the second processing station. Thus, small products measuring from 50 mm up to 150 mm can be processed on one side only. An additional benefit of this machine is the ability to round parts with protective surface film without damaging the film. Easy and tool-free cross belt change. The program for automatic positioning of the upper and lower belts ensures good accessibility and reduces changeover times. User-friendly operation via integrated touch screen. This machine is also available with a return transport system upon request. Technical data: Working capacity (Ø mm) 1100x50 Number of cross-belt stations 2 Cross-belt speed (m/s) 2–8 Feed speed (m/s) 0.6–3.2 Cross-belt motor (kW) (4x) 3 Feed motor (kW) (3x) 0.18 Total power (kW) 13.1 Power consumption (A) 30 Extraction connection per head (Ø mm) 150 Dimensions (mm) 2560x1980x2150 Weight (kg) 2210

Gamybos metai: 2002, Sąlyga: naudotas, Diameter: 180 mm Workpiece length: 0 mm Workpiece width: 1350 mm Total power requirement: 65 kW Machine weight approx.: 7,500 kg Space requirement approx.: [to be completed] m T I M E S A V E R S (Netherlands) Wide-belt deburring and finishing grinding machine Model: 41 Series 1350 WRDOW-N Ncjdpfxet Hw Shs Af Iol Year of manufacture: 2002 Serial No.: 2313-03 --- Grinding width approx.: 1,350 mm Maximum workpiece height approx.: 1–50 mm Feed speed, stepless: approx. 1–10 m/min Comprising the following units: 1.) Vacuum table with flat workpiece feed belt, vacuum track 780 mm in the center of the belt; belt feed motor approx. 3 kW, frequency-controlled for stepless feed 1–10 m/min; tip switch for belt forward/reverse operation; digital display for belt speed and stepless table height adjustment. Suitable for wet processing. 2.) Contact roller approx. Ø 180 mm x 1350 mm wide, drive approx. 15/19 kW, belt speed approx. 11–22 m/sec with fine height adjustment and pneumatic oscillation across the width, various grinding belts. 3.) Vertical grinding/deburring disc (disc brush system) approx. Ø 1200 mm, consisting of self-adhesive nylon fleece available in different grades, especially for deburring and cleaning surfaces and for edge rounding of workpieces. Also suitable for workpieces with varying heights. Drive approx. 7.5 kW, disc oscillates motor-driven (2.2 kW) across the entire belt width. 4.) Contact roller approx. Ø 180 mm x 1350 mm wide, drive approx. 18.5 kW, belt speed approx. 11 m/sec with fine height adjustment and pneumatic oscillation across the width, various grinding belts. 5.) Wet processing version = complete coolant system, consisting of band filter unit with pump integrated in the machine base, rotary union at the top of the deburring disc spindle, water return through the vacuum table, as well as water mist separator mounted above the machine with blower approx. 5.3 kW. Side doors made of stainless steel sheet. Oil skimmer, etc. 6.) Side-mounted control panel with user-friendly controls and digital position and speed display. Joystick for feed belt and table adjustment, 3x ammeters, etc., as well as workpiece pressure rollers at front and rear, emergency stop. Total drive approx.: 65 kW – 400 V – 50 Hz Weight: approx. 7,500 kg Required room height: approx. 3.50 m Condition: good – powered, ready for demonstration Delivery: ex stock – as inspected Payment: strictly net – after receipt of invoice

Sąlyga: naujas, DM100 ZC – Performs edge rounding and removes sharp burrs on both inner and outer edges of steel, stainless steel, or aluminum parts after laser-cutting, shearing, or punching of metal parts from a minimum size of 50 x 50 mm up to 1100 x 100 mm. Njdpfod Hintjx Af Ijcl The first station processes the products with a contact roller (approx. 55° Shore) and abrasive belt, removing heavy burrs in the initial step. The second station is equipped with two counter-rotating cross-belts with abrasive blocks, rounding the edges of the entire product, both inside and outside, in a second step. A key advantage is deburring products with surface protection film, as only the edges are processed without damaging the film. Technical data – DM1100 ZC: Working capacity (Ø mm): 1100 x 100 No. of belt stations (Z): 1 No. of cross-belt stations: 1 Abrasive belt, dimensions (mm): 1100 x 2200 Abrasive belt speed (m/s): 10 Cross-belt speed (m/s): 8 Feed speed (m/s): 0.9–13 Abrasive belt motor per head (kW): 18.5 Cross-belt motor (kW): (2x) 3 Feed motor (kW): 0.37 Total power (kW): 26.22 Power consumption (A): 55 Dust extraction connection per head (Ø mm): (2x) 150 Dimensions (mm): 2230 x 2300 x 2250 Weight (kg): 3300

Sąlyga: naudotas, Gamybos metai: 2020, mašinos/transporto priemonės numeris: 031EP-2020, Ref. No. 24558 Technical Data: - Grinding medium diameter: 150 mm - Grinding unit pivotable on articulated arm - Swivel radius of grinding arm: 2000 mm - Motorized dust extraction - Disc speed steplessly adjustable: 800 – 2200 rpm - Table dimensions: 1500 x 880 mm - Table height approx.: 920 mm Ncsdpfxovazz Dj Af Ijl - Drive: 400 V / 3.6 kW - Required floor space approx.: W 1600 x H 1600 x D 1600 mm - Weight approx.: 250 kg

Sąlyga: naudotas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2020, Wir bieten LASER-REPARATURDIENSTE für alle Arten von IPG-Lasern an. Wir ersetzen defekte Lasermodule durch überholte, voll funktionsfähige Komponenten, führen sämtliche Justierungen durch und machen Ihren Faserlaser wieder einsatzbereit! Egal, welches Problem Ihre IPG-Laserquelle hat – wir bringen sie wieder zum Laufen. Nicht nur IPG-Laserquellen: Mit über 10 Jahren Erfahrung in der Faserlaserindustrie reparieren wir ebenfalls Max Photonics, Raycus und weitere Lasermodule. Ncodpfxswf Hxqj Af Iol

Sąlyga: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, darbinis plotis: 800 mm, maks. lakšto storis: 120 mm, ruošinio aukštis (maks.): 120 mm, šlifavimo plotis: 800 mm, The grinding and deburring machine provides an efficient solution for processing laser-cut and plasma-cut parts. These high-quality machines ensure excellent performance by rounding the edges and removing burrs, resulting in significantly improved surface quality. Nedeulauvopfx Af Iecl Utilizing state-of-the-art technology, our machines comply with all relevant CE directives and guarantee the highest safety standards. The combination of user-friendly operation and a robust design enables seamless integration into your production processes. With our grinding and deburring machine, you not only optimize processing times but also increase the precision and durability of your products. Benefit from superior finishing quality and enhance your production efficiency.

Sąlyga: naujas, Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, darbinis plotis: 1 500 mm, X ašies padavimo greitis: 4 m/min, įvesties srovės tipas: trifazis, maks. lakšto storis: 102 mm, bendras ilgis: 2 300 mm, bendras plotis: 2 600 mm, bendras aukštis: 2 500 mm, bendras svoris: 4 000 kg, darbinio aukščio: 950 mm, ruošinio ilgis (maks.): 102 mm, Double-sided deburring in just one pass—naturally with 100% reproducible results and precise processing of both inner and outer edges—this is what only the EdgeRacer 1500 D offers you. Nsdpeucw Rbofx Af Iscl The EdgeRacer 1500 D, which deburrs on both sides, is the right choice for precise double-sided deburring and edge rounding. In addition to flat sheets, it can also process sheets with ribs, notches, threaded holes, and similar features. The maximum workpiece height is 102 mm. The brush units, operating from above and below, can be adjusted independently. Thanks to roller conveyor transport, the infeed can occur either below or above conveyor level.

Sąlyga: naudotas, Gamybos metai: 2017, Robotasinė ląstelė ABB robotas su Clean Laser Gamintojas: ABB / Clean Laser Modelis: IRB4600 Pagaminimo metai: 2017 Sistema sudaro: Ncsdpowrcn Ujfx Af Iel ABB robotas IRB4600 Valdymo spinta Rankinis valdymo pultas Laserinio valymo įranga Clean Laser tipas intelliScan30 Ištraukimo sistema TEKA

Sąlyga: naudotas, Gamybos metai: 2020, Gamintojas: Lechner Maschinenbau e.K. Tipas: 3100/110 Pagaminimo metai: 2020 Energijos prijungimas: 3 fazės, nulis, PE Įtampa: 400 V Galia: 1,5 kW Viršutinio volo skersmuo: 60–100 mm Nedpfjw Nhzyox Af Ijcl Maksimali darbinė ilgis: 1100 mm Nominali talpa: 3,2 mm (lakšto storis) Padavimo greitis: 5 m/min Užklausas prašome siųsti tik el. paštu. Visa informacija pateikta pagal geriausias žinias. Galimi netikslumai. Šis pasiūlymas skirtas tik verslo subjektams pagal Vokietijos civilinio kodekso 14 straipsnį (BGB). Pardavimas vykdomas be jokios garantijos. Šis apribojimas netaikomas žalos atlyginimo reikalavimams dėl pardavėjo šiurkštaus ar tyčinio įsipareigojimų pažeidimo ar bet kokio žalos sveikatai, kūnui ar gyvybei. Daugiau informacijos rasite Witzenmann GmbH svetainėje, skiltyse „Impressum“, „AGB“ ir „Datenschutz“.