Lazerinio pjaustymo mašinos

IPG Fiber Laser Module YLS, YLR, YLM, YLP,...

Sąlyga: naujas, DM1100 2C – Edge Rounding Machine for Laser, Flame-Cut, and Punched Parts. NEW DESIGN – CAN BE VIEWED UNDER POWER – IMMEDIATELY AVAILABLE FROM STOCK The DM1100 2C rounds the upper and lower edges of metal parts from a minimum size of 150 mm up to a length of 1100 mm in a SINGLE PASS. The first station processes the workpieces from below using two counter-rotating cross belts, while the second station works from above, also with two counter-rotating cross belts. The cross belts allow deburring of both inner and outer edges of the workpieces. Sharp edges produced during laser cutting, punching, or shearing of steel, stainless steel, and aluminum parts are removed. Simultaneous processing of both sides of laser-cut or punched metal parts saves time and reduces production costs. Another advantage of the DM1100 2C is its capability to process small parts from 50 mm. By folding up a table, the rotating direction of the upper conveyor automatically reverses, and the gap of the first processing station is bridged, enabling the workpieces to feed directly into the second processing station. Thus, small products measuring from 50 mm up to 150 mm can be processed on one side only. An additional benefit of this machine is the ability to round parts with protective surface film without damaging the film. Easy and tool-free cross belt change. The program for automatic positioning of the upper and lower belts ensures good accessibility and reduces changeover times. User-friendly operation via integrated touch screen. This machine is also available with a return transport system upon request. Technical data: Working capacity (Ø mm) 1100x50 Number of cross-belt stations 2 Cross-belt speed (m/s) 2–8 Feed speed (m/s) 0.6–3.2 Cross-belt motor (kW) (4x) 3 Feed motor (kW) (3x) 0.18 Total power (kW) 13.1 Power consumption (A) 30 Extraction connection per head (Ø mm) 150 Dimensions (mm) 2560x1980x2150 Bljdpfx Aaod Ev Upohsd Weight (kg) 2210

Sąlyga: naujas, DESCRIPTION DM100 Z2C – performs edge rounding and removes sharp burrs on both the inner and outer edges of steel, stainless steel, or aluminum parts after laser, shear, or punch separation of metal components ranging in size from 50 x 50 mm up to 1100 x 100 mm. The first station processes the products by means of a contact roller (approx. 55° Shore) with an abrasive belt, removing heavy burrs in the initial step. Blodpfsd Ixadsx Aahed The second station processes the products with two counter-rotating cross belts from both below and above. The cross belts round the edges of the workpieces on both inner and outer sides. A major advantage is the deburring of products with protective surface film, as only the edges are processed without damaging the film. Technical Data - DM1100 Z2C: Working capacity (Ø mm): 1100 x 100 Number of belt stations (Z): 1 Number of cross belt stations: 2 Abrasive belt dimensions (mm): 1100 x 2200 Abrasive belt speed (m/s): 8–22 Cross belt speed (m/s): 2–8 Feed speed (m/s): 0.6–3.2 Abrasive belt motor per head (kW): 18.5 Cross belt motor (kW) (2x): 3 Feed motor (kW) (3x): 0.18 Total power (kW): 33 Power consumption (A): 62 Extraction port per head (Ø mm): 150 + 185 Dimensions (mm): 3600 x 2330 x 2350 Weight (kg): 5000

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 1994, The press brake was manufactured in 1994. The working length is 1250 mm with a pressing force of 600 kN. Manufacturer: Micoda Bljdpfx Aaop R Ircshjd Working length: 1250 mm Pressing force: 600 kN Weight: 4000 kg Power: 10 kW

Sąlyga: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 1999, bendras svoris: 22 800 kg, spaudimo jėga: 250 t, CNC Press Brake Manufacturer: Weinbrenner Model: GP250 Machine Specifications: - Crowning system - Die shifting - Backgauge type 2 Bljdpjr Sxq Rsfx Aahed - Front bending aid (disassembled for transport) - DNC 900PS control unit All machine documentation is available.

Sąlyga: naujas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2025, Die CNC-BAYKAL Hybrid-Abkantpressen vereinen sämtliche Vorteile hydraulischer und vollelektrischer Abkantpressen in einem System. Wenn Sie eine Abkantpresse suchen, die schnell, präzise und energieeffizient arbeitet, ist BAYKAL die richtige Wahl. Die CNC-BAYKAL Hybrid-Abkantpressen ermöglichen erhebliche Energieeinsparungen, senken den Kraftstoffverbrauch, steigern die Biegeeffizienz, minimieren das Risiko von Ölleckagen, reduzieren Installationskosten, verlängern die Lebensdauer von Verschleißteilen, erhöhen die Biegegenauigkeit, vermindern die Geräuschentwicklung und verbessern das Arbeitsumfeld. Das CNC-BAYKAL Hybridpressen-System ist mit einem individuell gesteuerten elektrohydraulischen Servoantrieb sowie Servopumpen für jeden der beiden Zylinder (links und rechts) ausgestattet. Der Servomotor regelt den Förderstrom der Ölpumpe gemäß Programmvorgabe und steuert so die Bewegungsgeschwindigkeit und Positionsgenauigkeit des Pressenschlittens – ganz ohne Drosselverluste während des kompletten Arbeitszyklus. Somit steht die gesamte vom Ölpumpenaggregat geförderte Energie unmittelbar den beiden Zylindern zur Verfügung. Diese Steuerung erzeugt keinerlei Energieverluste und der Energiespareffekt ist äußerst ausgeprägt. Bei diesem System laufen die Hydraulikaggregate nur bei aktiver Fußpedalbetätigung und nicht dauerhaft, wie bei herkömmlichen hydraulischen Pressen. Das Resultat: Ein deutlich geringerer Energieverbrauch, schnellere Taktzeiten sowie höchste Präzision. Förderstrom und Druck der Y1- und Y2-Zylinder werden jeweils durch zwei separate servo-geregelte, bidirektionale Pumpensysteme geregelt. Das Öl aus dem oberen Zylinderraum wird dabei direkt durch die Ölpumpe in den unteren Raum gepumpt, um den Aufwärtshub des Pressenbalkens zu realisieren. Durch Umkehr der Pumpenlaufrichtung wird das Öl aus dem unteren Zylinderraum für die Press- und Biegevorgänge in den oberen Raum gepumpt. Im Bereich von 100 bis 1.250 Tonnen sorgt die getrennte Ansteuerung des linken und rechten Pressenbalkens über zwei unabhängige servo-bidirektionale Pumpensysteme für eine exakte Synchronisierung beim CNC-gesteuerten BAYKAL Hybrid-Abkanten. Bederq D Nispfx Aahsld

Gamybos metai: 2002, Sąlyga: naudotas, Diameter: 180 mm Workpiece length: 0 mm Workpiece width: 1350 mm Total power requirement: 65 kW Machine weight approx.: 7,500 kg Space requirement approx.: [to be completed] m T I M E S A V E R S (Netherlands) Wide-belt deburring and finishing grinding machine Model: 41 Series 1350 WRDOW-N Year of manufacture: 2002 Serial No.: 2313-03 --- Grinding width approx.: 1,350 mm Maximum workpiece height approx.: 1–50 mm Feed speed, stepless: approx. 1–10 m/min Comprising the following units: 1.) Vacuum table with flat workpiece feed belt, vacuum track 780 mm in the center of the belt; belt feed motor approx. 3 kW, frequency-controlled for stepless feed 1–10 m/min; tip switch for belt forward/reverse operation; digital display for belt speed and stepless table height adjustment. Suitable for wet processing. 2.) Contact roller approx. Ø 180 mm x 1350 mm wide, drive approx. 15/19 kW, belt speed approx. 11–22 m/sec with fine height adjustment and pneumatic oscillation across the width, various grinding belts. Bljdjt Hw Shopfx Aahod 3.) Vertical grinding/deburring disc (disc brush system) approx. Ø 1200 mm, consisting of self-adhesive nylon fleece available in different grades, especially for deburring and cleaning surfaces and for edge rounding of workpieces. Also suitable for workpieces with varying heights. Drive approx. 7.5 kW, disc oscillates motor-driven (2.2 kW) across the entire belt width. 4.) Contact roller approx. Ø 180 mm x 1350 mm wide, drive approx. 18.5 kW, belt speed approx. 11 m/sec with fine height adjustment and pneumatic oscillation across the width, various grinding belts. 5.) Wet processing version = complete coolant system, consisting of band filter unit with pump integrated in the machine base, rotary union at the top of the deburring disc spindle, water return through the vacuum table, as well as water mist separator mounted above the machine with blower approx. 5.3 kW. Side doors made of stainless steel sheet. Oil skimmer, etc. 6.) Side-mounted control panel with user-friendly controls and digital position and speed display. Joystick for feed belt and table adjustment, 3x ammeters, etc., as well as workpiece pressure rollers at front and rear, emergency stop. Total drive approx.: 65 kW – 400 V – 50 Hz Weight: approx. 7,500 kg Required room height: approx. 3.50 m Condition: good – powered, ready for demonstration Delivery: ex stock – as inspected Payment: strictly net – after receipt of invoice

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2007, Hydraulic synchronized press brake MECOS Mod. Syncro 200/4000. ESA KVARA CNC control. Number of controlled axes: 07 (Y1-Y2-X-R-Z1-Z1-Z1). Automatic WILA crowning table. Pneumatic tool clamping: Promecam type, Tecnostamp H=150 mm. Bedev S Ad Repfx Aahold Useful bending length: 4050 mm. Pressing force: 200 tons. Front safety system: DSP LASER. Weight: 24,000 kg.

Sąlyga: naudotas, Equipment: Used decanter / centrifuge Manufacturer: Flottweg Model: Solid-bowl scroll centrifuge Type: Z73-4/454 Bjdpfoppa Tcex Aahold Machine no.: 010.014.04 Year of construction: 1999 Bowl: max. rotational speed 2,800 rpm Permissible sediment density: 1.3 kg/dm³

Sąlyga: naujas, Gamybos metai: 2025, X ašies eiga: 1 520 mm, Y ašies eiga: 3 030 mm, Z ašies eigos atstumas: 300 mm, ruošinio svoris (maks.): 10 600 kg, bendras ilgis: 10 100 mm, bendras plotis: 2 500 mm, bendras aukštis: 4 500 mm, Maximale Bearbeitungsgröße: 3000×1500 mm Maximale Schnittstärke: Verarbeitbar ist ein Außendurchmesser von φ10–220 mm (Empfohlen: Rundrohr φ40–200, Vierkantrohr □40–200), Gewicht 20 kg/m Bljdpfx Aaov Awlqshod Rohrschneidetyp: 6 m Automatikspannfutter Maximale kombinierte Geschwindigkeit: 150 m/min Beschleunigung: 2,5 G

Sąlyga: naujas, DM100 ZC – Performs edge rounding and removes sharp burrs on both inner and outer edges of steel, stainless steel, or aluminum parts after laser-cutting, shearing, or punching of metal parts from a minimum size of 50 x 50 mm up to 1100 x 100 mm. The first station processes the products with a contact roller (approx. 55° Shore) and abrasive belt, removing heavy burrs in the initial step. The second station is equipped with two counter-rotating cross-belts with abrasive blocks, rounding the edges of the entire product, both inside and outside, in a second step. A key advantage is deburring products with surface protection film, as only the edges are processed without damaging the film. Technical data – DM1100 ZC: Working capacity (Ø mm): 1100 x 100 No. of belt stations (Z): 1 No. of cross-belt stations: 1 Bsdpsd Hintofx Aahsld Abrasive belt, dimensions (mm): 1100 x 2200 Abrasive belt speed (m/s): 10 Cross-belt speed (m/s): 8 Feed speed (m/s): 0.9–13 Abrasive belt motor per head (kW): 18.5 Cross-belt motor (kW): (2x) 3 Feed motor (kW): 0.37 Total power (kW): 26.22 Power consumption (A): 55 Dust extraction connection per head (Ø mm): (2x) 150 Dimensions (mm): 2230 x 2300 x 2250 Weight (kg): 3300