"Indramat" variklis

Indramat MAC071C-0-GS-4-C / 095-A-0 / WI520LV Permanent Magnet Motor SN: 76449

Sąlyga: naudotas, Gamybos metai: 1975, Technical Details: Swing over bed: 500 mm Swing over cross slide: 260 mm Turning length: 950 mm Centre height measured in bed: 220 mm Distance between centres: 1000 mm Spindle speeds: 11.2 - 2240 rpm / 24 steps Spindle bore: 62 mm Tailstock quill travel: 210 mm Longitudinal feeds: 0.045 - 1.6 mm/rev – 32 steps Cross feeds: 0.02 - 0.71 mm/rev – 32 steps Total power requirement: 11 kW Machine weight approx.: n/a t Machine dimensions approx. LxWxH: 3.3 x 1.2 x 1.6 m The machine is in very good condition (very quiet spindle run), available free in Leipzig. Top slide rotatable 360° 3-jaw chuck Ø 315 mm with jaws (internal/external) for 2000 rpm. Thread cutting: metric, module, inch threads Chip protection wall Chuck guard (mechanical) MULTIFIX toolpost with boring bar holder Ø 40 mm Chip collection tray Coolant supply with pump Lead screw protection Machine feet Ijdpfxov A Sqhj Afwoa CE safety pre-installed

Sąlyga: naujas, Neue Ausrüstung, hergestellt in Dänemark. Hubzeit: 18 Sekunden. Be- und Entladen mittels Palettenhubwagen. Die Güter werden auf eine ergonomisch korrekte Arbeitshöhe angehoben. Fernbediente Hebe-/Senkfunktion mit Not-Aus. Leistungsaufnahme: 0,75 kW. Tragfähigkeit: 1000 kg. Iedod Hp Efopfx Afwea Spannung: 3 x 400 V. Minimale Hubhöhe: 80 mm. Maximale Hubhöhe: 780 mm. Außenmaße: 1420 x 1140 mm. Freier Innenraum: 585 mm. Hub-/Senkgeschwindigkeit: 42 / 48 mm/s. Gewicht: 235 kg.

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever rack used: Bolted system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 4,160 mm with base section, 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Longitudinal and diagonal bracing for 4,000 mm rack length (upright spacing 1,300 mm) - Mounting hardware (bolts, nuts, and washers) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts and extensions available at any time) - (Offer available in larger quantities: approx. 90 uprights in stock) Iodjmhhf Sspfx Afwsa Detailed description: - Robust steel structure made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height: 4,160 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms: 1,200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 bolted cantilever arms per upright as standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Includes longitudinal and diagonal bracing for 1,300 mm upright spacing - Overall rack length: 4,000 mm - Includes mounting hardware (excluding floor anchors) - Includes assembly instructions and load signs C4 according to DIN standard - Expert telephone advice - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight services with advance notice prior to delivery. The material is packed efficiently to allow for easy unloading. When installed outdoors, the load capacities are reduced to account for wind and snow loads. The subfloor must be concrete, level, and suitable for anchoring, and must be capable of absorbing the applied loads. The floor condition and load capacity, as well as any required official permits, must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to the employers’ liability insurance association, it is recommended that the rack uprights extend at least 500 mm above the uppermost storage level.

Sąlyga: geras (naudotas), NHH lathe Swing diameter over bed: 260 mm Swing diameter over cross slide: 160 mm Spindle bore: 26 mm Turning length: 600 mm Heidenhain digital readout Ijdsmw Ukcepfx Afwea Chuck diameter: 155 mm Spindle speed: 2000 rpm Dimensions (LxWxH): 150x85x155 cm

Sąlyga: naujas, Extraction capacity of filter unit at connection*: 2,600 m³/h (free-blowing) Total power consumption*: 0.62 kW Ijdjpkwauepfx Afwea Operating voltage: 400 V, 50/60 Hz, 3Ph+PE Noise level*: 66 dB(A) Dimensions L/W/H in mm: L 1160 / W 508 / H 545 Colour: RAL 7035 Weight: 111 kg Manufacturer: ISI Industrieprodukte GmbH *Depending on filter configuration Special voltage or custom colour available on request OPTIONAL: With pre-filter package Application: Extraction of oil mist, emulsion mist (for emulsions with higher oil content), and smoke, suitable for small to very large machine enclosures | Oil mist separator Your advantages with the ELBARON series: - 18 device variants available - Direct from the manufacturer - ISI-TRONIC optional (digital filter control) - Electronically controlled EC fan as standard - Adjustable speed and air volume - Available as simplex (single-stage) or duplex (two-stage) - Wide range of air performance options - Adaptable to pollutant levels and required air volume - Comprehensive range of installation and connection accessories - Quality Made in Germany We have developed the ELBARON® filter series specifically for use in machining operations with pure oil and for the separation of oil mist and smoke (oil mist separator). For many years, the digital electrostatic air filters of the ELBARON® series have been among the most efficient filter units on the market and are used worldwide. Our filter units are already optionally digitalized and can, for example, be controlled via laptop. The ELBARON® series comprises 18 device variants and can be optimally configured in terms of size and performance to suit your application. ELBARON® units convince with long service life and absolute operational reliability. Our electrostatic filter cells are dimensioned to economically achieve the best possible filtration efficiency, service life, and trouble-free operation.

Sąlyga: naujas, Gamybos metai: 2025, The CORMAK 410 x 1500 industrial metal lathe features a robust cast iron bed construction. It is equipped with a 16-speed gearbox and a dual-range induction motor (2.2/3.3 kW), providing maximum torque. Recommended for machining hard steels and for mechanical turning operations. It can be utilized for a wide range of tasks, including internal and external surface turning, taper turning, polishing, metric and imperial threading, drilling, and broaching. The CORMAK 410x1500 universal lathe is suitable for various machining tasks, such as internal and external surface turning, taper turning, polishing, metric, imperial, module, and DP threading, drilling, and broaching. The rigid cast iron bed ensures maximum vibration reduction. The bed is additionally hardened and precisely ground. Digital readout operates on three movement axes: longitudinal, transverse, and upper carriage. The processed electronic signal from optical scales displays movement values along the axes directly on the digital screen. The lathe is fitted with a high-quality, reinforced spindle bearing system. Optimal performance is ensured by the large 52 mm spindle bore. The spindle gearbox features hardened and ground gears. Iedsrh E Smopfx Afwsa The 250 mm bed width provides stable and precise machining conditions. Equipped with a leadscrew and a feed shaft for threading as well as automatic longitudinal and cross feeds. Easy speed and automatic feed adjustment via the ergonomic control panel on the gearbox. A wide range of thread turning is possible without the need to change gears in the gear train. Thread types include: metric (42) 0.2 – 14 mm/rev, imperial (42) 2 – 72 TPI, module (18) 0.3 – 3.5 mm, DP thread (21) 8 – 44 DP. Right-hand and left-hand threading available. The threading dial allows precise thread pitch counting. This function saves time, enabling the operator to disengage the leadscrew nut within several passes and manually return the carriage to its original position quickly. The bed features a removable gap bridge, allowing machining of larger diameter workpieces such as discs. This lathe model enables processing of workpieces up to a maximum diameter of 580 mm with the gap bridge removed.

Sąlyga: naudotas, Thread cutting machine, pipe threader -without tooling Ijdpfx Afofyh Ebowoa -operating voltage: 220 Volt -dimensions: 830/530/H1080 mm -weight: 64 kg