Šildytuvai ir pūstuvai pirkti naudotą (271)

Būklė: geras (naudotas), Drum Tipper, Paint Bucket Tilting Device, Can Tipping Apparatus - Auxiliary device for decanting varnishes, paints, etc. Pgedpfx Aectyq Hjpyok - Holding diameter: 335 mm - Dimensions: 500/360/H1100 mm - Weight: 10 kg

Būklė: naudotas, Thermal system, fan heater, heating elements -Manufacturer: Ziehl-Abegg, axial fan, axial ventilator, heating blower Podsuqf Hzopfx Apyogk -Axial fan: type DADL 350/6 -Power: kW -Dimensions: Ø 470 x 245 mm -Weight: 9.1 kg

Būklė: geras (naudotas), electric heater, electric radiator, heating coil, electric heating unit, panel storage heater, panel heater -Manufacturer: Wibo, panel heater type thermatic 1000 with thermostat -Power rating: 1000 watts -Voltage: 220 V -Quantity: 2 heaters available Psdpfxsudqcyo Apyegk -Price: per unit -Dimensions: 800/110/H620 mm -Weight: 20 kg/unit

Būklė: naudotas, Thermal System, Fan Heater, Heating Elements, Radial Fan Heater - Manufacturer: Karl Klein, Fan with Heater: HVL 150 - Fan: Type ENG 3-6 K/S30 - Output: 100 W / 7.8 m³/min - Heating Attachment: Type 8.0104 1500 W - Inlet: Ø 170 mm - Outlet: Ø 55 mm - Quantity: 3 units available - Price: per piece - Dimensions: 280/250/H270 mm - Weight: 6.2 kg/piece Pgedpfx Aperkp Nxeyok

Būklė: geras (naudotas), Heating blower, mobile heater, gas heater, gas blower - Output: adjustable: 24.3 to 64 kW - Consumption: 1.5 to 5 kg/h - Connection pressure: 0.6-3.0 bar Pgjdpfeb A S A Ujx Apysk - Air flow rate: 2150 m³/h - Weight: 26 kg

Būklė: naudotas, Heat exchanger, heat exchanger, rotary heat exchanger, exhaust air heat exchanger Heat exchanger: air/air - Manufacturer: Klingenburg, rotary heat exchanger type RRSE 4066/2750 - Rotor: diameter: 2570 mm - Speed: 8 rpm - Dimensions: 4066/2750/H460 mm - Weight: 850 kg Pgedpfx Aoul H D Ropyok

Būklė: naudotas, Hot air blower, heater, heat exchanger, air heater, air warmer, duct air heater, duct-mounted air heater, heating register - Manufacturer: Kampmann, air heater heat exchanger with attachments - Model: Top 4000, 2-stage 153000452036 Pedpfx Apju Scqbeyjgk - Output: 20.3/23.3 kW - Operating pressure: max 10 bar - Quantity: 2x air heaters available, 1x with additional bracket - Price: per unit - Dimensions: 700/680/H1020 mm / 700/680/H900 mm - Weight: 45 kg / 40 kg

Būklė: geras (naudotas), Šildymo ventiliatorius, šildytuvas, šilumokaitis, oro šildytuvas, ortakinis oro šildytuvas, ortakinis šildytuvas, šildymo registras - Gamintojas: GEA Happel, oro šildytuvas su šilumokaičiu - Tipas: 4124/403/441 - Galia: kW - Nominali oro apimtis: apie 2800 m³/h - Ventiliatorius: Ziehl-Abegg - Darbinis slėgis: maks. 13,7 bar - Kiekis: 2 vnt. oro šildytuvų Pgsdpfxju Tlhvj Apyok - Kaina: už vienetą - Matmenys: 885/550/H600 mm - Svoris: 90 kg/vnt.

Būklė: naujas, Gamybos metai: 2025, Dimensions (L/W/H): 800 x 1170 x 2280 mm Weight: 500 kg Total power requirement: 1 kW Pedpjvz Hq Tofx Apyogk Hot Air Furnace MARTINA 85 The MARTINA hot air furnaces offer an ideal solution for energy utilization in woodworking industrial and craft businesses. They have been developed for heating larger utility spaces such as workshops and workspaces in craft and industrial enterprises. These hot air systems require no extended heat-up phases and can quickly warm up joinery, carpentry, or other production facilities. Solid wood and its by-products—e.g., solid wood board offcuts, chips, sawdust, pellets, or briquettes—serve as fuel. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of July 24, 1996, and the safety provisions of Directive 89/392 CE. All hot air furnaces of the MARTINA series (15 – 30 – 55 – 85 – 120 – 180 – 240 – 350) meet both stages of required emission values according to the 1st BImSchV. - Automatic and continuous air operation - Thermal output: 85 kW - Thermal output (kcal): 73,000 - Fuel consumption: 19 kg/h - Air flow rate: 6,400 m³/h - Firebox depth: 840 mm - Loading door: 430 x 430 mm - Hot air fan: 0.98 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Flue draught at rated load: 0.18 mbar - Heatable room volume: approx. 1,600 m³ - Heat coverage area: approx. 300 m² - Space requirement: width 800 mm, depth 1170 mm, height 2200 mm - Weight: 500 kg - Flue connection diameter: 200 mm - Recommended chimney diameter: 250 mm - Efficiency: 85–90% - Chimney draft pressure: 16 Pa - Flue gas temperature: 291°C - Hot air outlet port: 2 x Ø 220 mm - For further technical data, please refer to the attached data sheet The two pipe connections for the air outlet are located at the lower rear section of the furnace. A maximum of 20 meters of ducting per pipe connection is allowed for air distribution.

Būklė: naujas, Gamybos metai: 2025, Dimensions (L x W x H): 720 x 1000 x 1900 mm Weight: 300 kg Total Power Requirement: 1.2 kW Hot Air Furnace MARTINA 55 The MARTINA hot air furnaces are an ideal solution for energy recovery in wood-processing industrial and craft businesses. They are designed to heat large areas, such as workshops and working spaces in trade and industrial operations. These hot air systems require no lengthy warm-up phases and can heat up workshop halls of joineries or carpentries, as well as other production facilities, in a very short time. Solid wood and its by-products (e.g. offcuts from solid wood panels, chips, sawdust, pellets, or briquettes) serve as fuel materials. The MARTINA hot air furnaces comply with EU Directive 98/37CE and Italian Presidential Decree No. 459 dated July 24, 1996, as well as the safety directive of 89/392 CE. All MARTINA series hot air furnaces (models 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350) meet both emission stages according to the 1st German Federal Immission Control Ordinance (BImSchV). - Automatic and continuous air operation - Thermal output: 49.9 kW - Thermal output Kcal: 43,000 - Fuel consumption: 15 kg/h Pgedjvz Hq Hepfx Apysk - Air output: 4,900 m3/h - Combustion chamber depth: 650 mm - Loading door: 370 x 350 mm - Hot air blower: 1.12 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Draft requirement at nominal output: 0.18 mbar - Heatable volume: approx. 1,000 m3 - Heatable area: approx. 220 m2 - Space requirement: Width 720 mm, Depth 1,000 mm, Height 1,900 mm - Weight: 300 kg - Flue pipe diameter (collar): 160 mm - Chimney diameter (recommended): 200 mm - Efficiency: 85–90% - Chimney discharge pressure: 13 PA - Flue gas temperature: 290°C - Hot air outlet spigots: 2 x Ø 200 mm - For additional technical data, please refer to the attached data sheet The two pipes for outgoing hot air are located at the lower part of the rear side of the furnace. A maximum of 20 meters of ducting per spigot is permitted for air distribution.

Būklė: naujas, Gamybos metai: 2025, Dimensions (L/W/H): 1700 x 2000 x 2550 mm Weight: 1400 kg Total power requirement: 4.5 kW Hot Air Furnace MARTINA 350 The MARTINA hot air furnaces are an ideal solution for energy utilization in wood-processing industrial and craft businesses. They have been developed for heating large utility areas, such as workshops and working spaces of trade and industrial enterprises. These hot air systems require no long heat-up phases and heat up woodworking shops, carpentries, and other production areas within a very short time. The furnaces can use solid wood and its by-products as fuel, e.g. solid wood panel residues, chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 dated July 24, 1996, and safety guideline Directive 89/392 CE. All hot air furnaces of the MARTINA series (15 – 30 – 55 – 85 – 120 – 180 – 240 – 350) meet both stages of emission limits stipulated by the 1st BImSchV. - Automatic and continuous air operation - Thermal output: 390 kW - Thermal output (Kcal): 335,000 - Fuel consumption: 85 kg/h - Air output: 20,000 m³/h - Combustion chamber depth: 1400 mm - Feed door: 500 x 700 mm - Hot air blower: 4.48 kW - Firebox negative pressure: 0.2–0.3 mbar - Flue draft requirement at nominal output: 0.18 mbar - Heatable room volume: approx. 7,500 m³ Pgjdpfevz Hqysx Apyjk - Heatable area: approx. 1,600 m² - Space requirement: width 1700 mm, depth 2000 mm, height 2550 mm - Weight: 1400 kg - Flue pipe diameter (connection): 300 mm - Chimney diameter (reference value): 350 mm - Efficiency: 85–90% - Chimney draft: 11.5 Pa - Flue gas temperature: 289°C - Hot air discharge nozzles: 2 x Ø 450 mm - For additional data, please refer to the data sheet. The two pipe fittings for outgoing hot air are located at the rear of the furnace near the bottom. For each pipe fitting, a maximum pipe length of 20 meters is allowed for air distribution. Longer lengths are optionally available upon arrangement with the manufacturer. Please contact us for more details.

Būklė: naujas, Gamybos metai: 2025, Dimensions (L/W/H): 600 x 800 x 1900 mm Weight: 230 kg Total power requirement: 0.5 kW Hot Air Furnace MARTINA 30-15 The MARTINA hot air furnaces are an ideal solution for energy utilization in woodworking industrial and craft businesses. They are designed for heating larger functional areas, such as workshops and workspaces in craft and industrial facilities. These hot air systems require no long heat-up phases and warm up the workshop or production hall—such as those in carpentry, joinery, or other manufacturing environments—in a very short time. Suitable fuels include solid wood and its by-products, e.g. solid wood board offcuts, shavings, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 dated 24 July 1996, and the safety directive of installation 89/392 CE. All MARTINA series hot air furnaces (models 15, 30, 55, 85, 120, 180, 240, 350) meet both emission stages required by the 1st BImSchV (Federal Emission Control Ordinance). - Automatic and continuous air operation - Thermal output: 14.8 kW - Thermal output: 12,720 Kcal - Fuel consumption: 4.5 kg/h - Air flow rate: 2,400 m³/h - Combustion chamber depth: 580 mm - Loading door: 330 x 330 mm - Hot air blower: 0.49 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Draft requirement at rated output: 0.18 mbar - Heatable room volume: approx. 300 m³ - Heatable area: approx. 60 m² - Space requirement: width 600 mm, depth 800 mm, height 1900 mm - Weight: 230 kg - Flue pipe diameter (connector): 160 mm - Recommended chimney diameter: 200 mm - Efficiency: 85–90% - Chimney pressure: 11 Pa - Flue gas temperature: 286°C - Hot air outlet connectors: 2 x Ø 200 mm - For further specifications, please refer to the attached data sheet Pgjdpfxovz Hqts Apysk The two duct connectors for warm air outlet are located at the lower rear side of the unit. A maximum pipe length of 20 meters per connector is permitted for air distribution.

Būklė: naujas, Gamybos metai: 2025, Dimensions (L/W/H): 600 x 800 x 1900 mm Weight: 230 kg Total power requirement: 0.5 kW Hot Air Furnace MARTINA 30 The MARTINA hot air furnaces offer an ideal solution for energy recovery in woodworking industrial and craft businesses. They are designed to heat larger usable spaces such as production halls and work areas in trade and industrial facilities. These hot air systems require no lengthy heat-up phases and can quickly warm up carpentry or joinery workshops as well as other manufacturing sites. Fuel types include solid wood and its by-products, such as remnants of solid wood boards, chips, sawdust, pellets, or briquettes. MARTINA hot air furnaces comply with EU Directive 98/37/CE, Italian Presidential Decree No. 459 of July 24, 1996, and the safety directive of Equipment 89/392/CE. All MARTINA series hot air furnaces (15 – 30 – 55 – 85 – 120 – 180 – 240 – 350) meet both emission threshold stages required by the 1st German Federal Immission Control Ordinance (BImSchV). - Automatic operation and continuous air mode - Thermal output: 29.8 kW - Thermal output (Kcal): 25,700 - Fuel consumption: 9 kg/h - Air output: 2,400 m³/h - Combustion chamber depth: 580 mm - Loading door: 330 x 330 mm Pgedpsvz Hqmofx Apyek - Hot air blower: 0.49 kW / 230 V - Firebox underpressure: 0.2–0.3 mbar - Draft requirement at nominal output: 0.18 mbar - Heatable volume: approx. 600 m³ - Heatable surface area: approx. 120 m² - Footprint: Width 600 mm, Depth 800 mm, Height 1900 mm - Weight: 230 kg - Flue outlet diameter (collar): 160 mm - Chimney diameter (reference value): 200 mm - Efficiency: 85–90% - Chimney draft: 11 Pa - Exhaust gas temperature: 286 °C - Hot air outlet connections: 2 x Ø 200 mm - For further technical data, please refer to the attached data sheet The two pipe collars for the outgoing hot air are located on the rear side of the furnace in the lower section. A maximum pipe length of 20 metres is permitted per collar for air distribution.

Būklė: naujas, Gamybos metai: 2025, Dimensions (L x W x H): 1300 x 1700 x 2550 mm Weight: 1200 kg Total connected load: 2 kW Hot Air Furnace MARTINA 240 The MARTINA hot air furnaces offer an ideal solution for energy utilization in wood-processing industrial and craft businesses. They are designed for heating large usable spaces such as workshops and production areas in craft or industrial enterprises. These hot air systems do not require long heating-up phases and are capable of rapidly warming up joinery and carpentry workshops or other production facilities. The units can burn solid wood and its byproducts, e.g. offcuts from solid wood panels, chips, sawdust, pellets, or briquettes. MARTINA hot air furnaces comply with EU Directive 98/37/EC, Italian Presidential Decree No. 459 of 24 July 1996, and safety guideline 89/392/EEC. All hot air furnaces of the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 fulfill both stages of the emission values required by the 1st BImSchV. - Automatic and continuous air operation - Thermal output: 233 kW - Thermal output (kcal): 199,000 - Fuel consumption: 50 kg/h - Airflow rate: 18,000 m³/h - Combustion chamber depth: 1200 mm - Loading door: 460 x 600 mm Pjdjvz Hqgopfx Apyogk - Hot air fan: 1.96 kW / 230 V - Firebox negative pressure: 0.2-0.3 mbar - Nominal output draft requirement: 0.18 mbar - Heatable volume: approx. 4,500 m³ - Heatable area: approx. 900 m² - Space required: width 1300 mm, depth 1700 mm, height 2550 mm - Weight: 1200 kg - Flue pipe diameter (connection): 250 mm - Recommended chimney diameter: 300 mm - Efficiency: 85–90 % - Chimney fan pressure: 16 Pa - Flue gas temperature: 290 °C - Hot air outlet connections: 2 x Ø 450 mm - Further data available in the attached data sheet The two duct connections for outgoing hot air are located on the lower rear side of the unit. A maximum of 20 meters of duct per outlet is allowed for air distribution.

Būklė: naujas, Gamybos metai: 2025, Dimensions (L x W x H): 800 x 1170 x 2300 mm Weight: 650 kg Total power requirement: 1.05 kW Warm Air Furnace MARTINA 120 The MARTINA warm air furnaces provide an ideal solution for energy utilization in woodworking industrial and craft businesses. They have been developed for heating larger areas, such as workshops and production halls in both craft and industrial operations. These warm air systems require no lengthy preheating times and are capable of warming up joinery or carpentry workshops and other production facilities in a very short period. The furnace can be fueled with solid wood and its by-products, e.g. offcuts from solid wood panels, chips, sawdust, pellets, or briquettes. The MARTINA warm air furnaces comply with EU Directive 98/37/EC, Italian Presidential Decree No. 459 of July 24, 1996, and the safety guideline of Directive 89/392/EEC. All warm air furnaces in the MARTINA series (15 – 30 – 55 – 85 – 120 – 180 – 240 – 350) fulfill both stages of the emission limits required by the 1st Federal Immission Control Ordinance (BImSchV). - Automatic and continuous air operation - Thermal output: 145 kW - Thermal output: 125,000 kcal - Fuel consumption: 30 kg/h - Air performance: 9,000 m³/h - Combustion chamber depth: 950 mm - Loading door: 460 x 440 mm - Warm air blower: 1.05 kW / 230 V - Combustion chamber negative pressure: 0.2–0.3 mbar - Flue draught at nominal load: 0.18 mbar - Heatable room volume: approx. 2,500 m³ - Heatable area: approx. 500 m² Psdpfevz Hhxox Apyogk - Required space: Width 800 mm, Depth 1170 mm, Height 2300 mm - Weight: 650 kg - Flue pipe diameter (connector): 200 mm - Chimney diameter (recommendation): 250 mm - Efficiency: 85–90% - Chimney draft: 16 Pa - Exhaust gas temperature: 287°C - Warm air outlet nozzles: 2 x Ø 220 mm - For further data, please refer to the enclosed data sheet The two pipe connectors for outgoing warm air are located at the rear bottom side of the furnace. A maximum pipe length of 20 meters per nozzle is permitted for air distribution.

Būklė: naudotas, Gamybos metai: 2000, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: Fabr. Nr. 281007 - 0125, bendras plotis: 900 mm, bendras ilgis: 1 800 mm, bendras aukštis: 1 250 mm, įvesties srovės tipas: trifazis, tūrio srautas: 1 150 m³/val, nominali šilumos galia: 90 kW (122,37 AG), Įranga: Tipinė plokštelė prieinama, Parduodame savo karšto oro šildytuvą su patalpų termostatu, Kroll M 100, 90kW, pagamintas apie 2000 m., pagal amžių gera būklė. Visiškai veikiantis. Be to, už papildomą mokestį galima įsigyti šiuos vamzdžius ir alkūnes: 7 vnt. spiralinio siūlo vamzdis D = 355mm L = 2000mm, 1 vnt. spiralinio siūlo vamzdis D = 355mm L = 1000mm, 2 vnt. spiralinio siūlo vamzdis D = 180mm L = 2000mm, 1 vnt. Y-formos dalis su tarpine 45° L = 800mm, 6 vnt. alkūnės su tarpine D = 355mm 45°, 1 vnt. alkūnė su tarpine D = 355mm 90°, 1 vnt. redukcija D = 560/355mm L = 550mm, 8 vnt. movų D = 355mm, 4 vnt. jungtis su tarpine D = 355mm. Vamzdžiai jau buvo sumontuoti ir sukabinti kniedėmis. Podpfxexv Akzj Apyjgk

Būklė: labai geros būklės (naudotas), Gamybos metai: 2020, 1. WEISHAUPT WM-G10/4-A (su dujų magistrale) - Galia: 100-1100 kW - Versija: ZM-LN - Pagaminimo metai: 2020 2. WEISHAUPT WM-G10/3-A (su dujų magistrale) - Galia: 100-1000 kW - Versija: ZM - Pagaminimo metai: 2015 (1 vnt.), 2013 (yra 2 vnt.) 3. WEISHAUPT WM-G10/3-A (su dujų magistrale) - Galia: 125-900 kW - Versija: ZM-LN - Pagaminimo metai: 2011 Psdowgyrtepfx Apysgk 4. WEISHAUPT WM-G10/3-A (su dujų magistrale) - Galia: 100-1000 kW - Versija: ZM - Pagaminimo metai: 2011 5. WEISHAUPT WM-G10/3-A (su dujų magistrale) - Galia: 100-1000 kW - Versija: ZM - Pagaminimo metai: 2009

Būklė: labai geros būklės (naudotas), Gamybos metai: 2016, RIELLO RS70 naujas, nenaudotas, originalioje pakuotėje: (yra 2 vnt) Pgodpfx Aowgyp Espysk - Galia: 192-814 kW - Pagaminimo metai: 2016

Būklė: geras (naudotas), Kroll M 150 mobilus karšto oro generatorius Panaudojimo sritys: - Salės, palapinių ir statybviečių šildymas - Apsauga nuo užšalimo sodininkystės įmonėse arba įvairiose sandėliavimo patalpose - Greitas naujų pastatų džiovinimas - Papildomas šildymas šaltuoju metų laiku Kuras: lengvasis mazutas EL Nominali šilumos galia: 135 kW Nominali šilumos apkrova: 150 kW Alyvos sąnaudos: 12,7 kg/h Oro srautas: 7.300 m³/h Elektros jungtis: 220 V / 6,1 A Energijos suvartojimas: 1,38 kW Apsaugos klasė: IP 44 Matmenys: Ilgis: 2600 mm Pgedpfjxwkw Ejx Apysk Plotis: 900 mm Aukštis: 1300 mm Svoris: 270 kg Galimas finansavimas per mūsų banką. komplett-konzept.leasingo.de Daugiau naujų ir naudotų prekių rasite mūsų parduotuvėje! Tarptautinio pristatymo kainos pagal užklausimą!

Būklė: geras (naudotas), Reznor UDSA Gas Warm Air Heater UDSA Gas Warm Air Heater – Top Efficiency Across the Board The most well-known unit from REZNOR is the UDSA gas warm air heater, specifically designed to deliver consistent air distribution in industrial halls. This easy-to-install recirculation unit is available in 14 performance sizes from 7 to 97 kW, and consists of a heat exchanger, gas burner, and an exhaust fan. Combustion air can be supplied either from outside (standard) or from the installation room. The REZNOR UDSA warm air heater ensures even air distribution throughout the heated hall. Its patented heat exchanger sets new standards in flow dynamics and heat transfer, resulting in an efficiency of over 92%. UDSA: compact, revolutionary, and trendsetting. This generation of units allows halls to be heated in a highly economical way directly—that is, without a central heating system—using decentralized, modulating gas warm air heaters. REZNOR UDSA Gas Warm Air Heater. Key Advantages: - Efficiency greater than 92% - Suitable for vertical installation as well - Low NOx emissions - Innovative combustion concept - Quiet operation - CE system certification, Types B or C - Compact design for easy installation - Uniform heat distribution - Standard vertical and horizontal air deflection louvres - Heating output modulation down to 50% - EC technology - ErP Ready These units are direct-fired gas warm air heaters (WLE) with fan-supported atmospheric multi-gas burners. Installation and connection of the gas and flue components must be performed exclusively by an authorized installation company. The gas WLE units are suitable for: - Natural gas or LPG operation - Recirculated air operation - Intake temperatures below 5°C with stainless steel heat exchanger* - 1-stage or 2-stage heating operation* via room thermostat and heat control switch - Ventilation control using ECOtronic TN-L° with day/night/week program - Roof flue outlets, types B or C - Wall flue outlets, type C Gas WLE Type: UDSA055-4E Gas Appliance Category: B22P-C12-C32-C52-C62 Designation: DE Gas Category: I2ELL Gas Type: G20 Natural Gas Connection Pressure: 20 mbar Nozzle Pressure: 8.40 mbar Max. Rated Heat Input (Hs) QN: 66.04 kW Max. Rated Heat Input (Hi) QN: 59.50 kW Min. Rated Heat Input (Hs) QN: 33.02 kW Pgjdpfxswb A Hij Apysk Min. Rated Heat Input (Hi) QN: 29.75 kW Max. Rated Heat Output: 54.74 kW Min. Rated Heat Output: 26.92 kW Supply Voltage: 230V 1N, 50Hz Air Volume Flow: 5,830 m³/h Protection Class: IP20 Pin No. 0461BN0677 Financing through our bank is also possible. komplett-konzept.leasingo.de For more products—new and used—visit our shop! International shipping costs on request!

Būklė: geras (naudotas), Immersion Heater - Power: max. 2000 W Psdpfx Apjb A Iavoyegk - Selector Switch: 12 positions - Housing: aluminium - Connection: 230 V - Weight: 5 kg

Būklė: geras (naudotas), Heating blower, mobile heater, gas heater, gas blower - Output: adjustable from 50 to 100 kW - Length: 560 mm - Width: 350 mm - Height: 500 mm - Gas type: Propane - Quantity: 1 available Pgedpfx Ajb A Shxjpyjk - Price: per unit - Weight: 16 kg

Būklė: labai geros būklės (naudotas), Stainless steel (VA) chimney cover, chimney cap - Internal bracket spacing: 460 mm - Dimensions: 755/1065/H400 mm Pgsdpfx Apeb Uhmvsyok - Weight: 14 kg

Būklė: geras (naudotas), Gamybos metai: 2011, Temperature control unit, heater, hot water boiler, hydronic system, hydraulic station for high-pressure cleaners, high-pressure pump - Temperature control units for: water - Electric heater for: high-pressure cleaners, high-pressure pump - Manufacturer: Frigotrol - Model: S-TT 50/108-D - Output: 110 kW - Connection: - Permissible operating overpressure: 6 bar Podpfjqw D Dpsx Apyogk - Dimensions: 1548/890/H1630 mm - Weight: 380 kg

Būklė: naudotas, Heating fan, heater, heat exchanger, air heater, air blower, duct air heater, duct-mounted air heater, heating coil - Delivery: in as-is condition as inspected - Fan motor: missing - Manufacturer: Kampmann, air heater heat exchanger - Type: Tip 5000 - Output: kW - Fan: missing Pgsdpjvrdr Njfx Apysk - Operating pressure: max 10 bar - Dimensions: 800/710/H740 mm - Weight: 27 kg