Šildytuvai ir pūstuvai pirkti naudotą (268)

Būklė: naudotas, Heat exchanger, heat exchanger, rotary heat exchanger, exhaust air heat exchanger Heat exchanger: air/air - Manufacturer: Klingenburg, rotary heat exchanger type RRSE 4066/2750 - Rotor: diameter: 2570 mm - Speed: 8 rpm - Dimensions: 4066/2750/H460 mm Ihjdpfx Asul H D Regfsw - Weight: 850 kg

Būklė: naudotas, Hot air blower, heater, heat exchanger, air heater, air warmer, duct air heater, duct-mounted air heater, heating register - Manufacturer: Kampmann, air heater heat exchanger with attachments - Model: Top 4000, 2-stage 153000452036 - Output: 20.3/23.3 kW - Operating pressure: max 10 bar - Quantity: 2x air heaters available, 1x with additional bracket Ihsdpfju Scqbox Agfjw - Price: per unit - Dimensions: 700/680/H1020 mm / 700/680/H900 mm - Weight: 45 kg / 40 kg

Būklė: geras (naudotas), Šildymo ventiliatorius, šildytuvas, šilumokaitis, oro šildytuvas, ortakinis oro šildytuvas, ortakinis šildytuvas, šildymo registras - Gamintojas: GEA Happel, oro šildytuvas su šilumokaičiu - Tipas: 4124/403/441 - Galia: kW - Nominali oro apimtis: apie 2800 m³/h - Ventiliatorius: Ziehl-Abegg Ihsdpfju Tlhvsx Agfjw - Darbinis slėgis: maks. 13,7 bar - Kiekis: 2 vnt. oro šildytuvų - Kaina: už vienetą - Matmenys: 885/550/H600 mm - Svoris: 90 kg/vnt.

Būklė: naudotas, Gamybos metai: 1988, Šildytuvas robatherm RL 300 su dujų degikliu Viessmann ir vožtuvu, įskaitant 10 m nerūdijančio plieno kaminą su valymo dangteliais. Pagaminimo metai: 12/88. Parduodamas dėl naujo įsigijimo. Pilnai veikiantis. Iedjx Uqc Espfx Agfehw

Būklė: geras (naudotas), Gamybos metai: 1994, Katilas karštam vandeniui arba garui. Kuro tipas: medienos skiedros. Šilumos galia: 6 MW. Iki 120 °C, leidžiamas viršslėgis 1 baras. Su alyvos degikliu kaip papildoma kuro rūšis. Išmontavimu turi pasirūpinti pirkėjas. Iedpfjyiky Ajx Agfehw

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2018, Funkcionalumas: visiškai funkcionalus, Prikaitinimo katilas (alyva) Aura AKL 2504 G ▪ Galia: max. 2500 kW ▪ Srautas: max. 99 m3/h ▪ Slėgis: max. 10 PS ▪ Temperatūra: -10 / 315 °C ▪ Talpa: 1873 L Degiklis Weishaupt WM-G30/1-A ▪ Galia: max. 3500 kW ▪ Dujų tipas: gamtinės ▪ Slėgis: max. 1 bar Ihedpfx Agoxfa Tlsfjw

Būklė: naujas, - NEW - without side panels and without base frame Kanuk® Original Hot Air Furnace - Firebox opening H x W (cm): 31 x 31 - Flue outlet: top / rear - Efficiency (%): 83.9 - Log length (cm): 48 - Minimum chimney draft (Pa): 16 Ihedsvyd Awspfx Agfow - Ash drawer: No - BImSchV Stage 2: Yes - Lignite briquettes: No - CE marking: Yes - Total output (kW): 17.7 - Space heating capacity (m³): 540 - Viewing window (cm): 24 x 14 - Weight (kg): 153 - Wood consumption (kg/h): 4.2 - Flue throttle: No - Design type 1 (self-closing door): Optional - Firewood, wood briquettes: Yes - AT §15a B-VG Standard: Yes - External air connection (mm): 80 mm - Dimensions H x W x D (cm): 80 / 58 / 95 - Flue outlet (mm): 160 - Door diameter (cm): 28 - Exhaust gas temperature (°C): 232 - Flue mass flow (g/s): 14.28 - Firebox H x W x D (cm): 40 x 44 x 49.5 - Airwash: Yes - DIN EN number: 13240 - Primary, secondary, tertiary air: Yes - LRV Switzerland: Yes Ref. 2100108

Būklė: naujas, Gamybos metai: 2025, Dimensions (L/W/H): 800 x 1170 x 2280 mm Weight: 500 kg Total power requirement: 1 kW Hot Air Furnace MARTINA 85 The MARTINA hot air furnaces offer an ideal solution for energy utilization in woodworking industrial and craft businesses. They have been developed for heating larger utility spaces such as workshops and workspaces in craft and industrial enterprises. These hot air systems require no extended heat-up phases and can quickly warm up joinery, carpentry, or other production facilities. Solid wood and its by-products—e.g., solid wood board offcuts, chips, sawdust, pellets, or briquettes—serve as fuel. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 of July 24, 1996, and the safety provisions of Directive 89/392 CE. All hot air furnaces of the MARTINA series (15 – 30 – 55 – 85 – 120 – 180 – 240 – 350) meet both stages of required emission values according to the 1st BImSchV. - Automatic and continuous air operation - Thermal output: 85 kW - Thermal output (kcal): 73,000 - Fuel consumption: 19 kg/h - Air flow rate: 6,400 m³/h - Firebox depth: 840 mm - Loading door: 430 x 430 mm - Hot air fan: 0.98 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Flue draught at rated load: 0.18 mbar - Heatable room volume: approx. 1,600 m³ - Heat coverage area: approx. 300 m² - Space requirement: width 800 mm, depth 1170 mm, height 2200 mm - Weight: 500 kg - Flue connection diameter: 200 mm - Recommended chimney diameter: 250 mm - Efficiency: 85–90% - Chimney draft pressure: 16 Pa - Flue gas temperature: 291°C - Hot air outlet port: 2 x Ø 220 mm - For further technical data, please refer to the attached data sheet The two pipe connections for the air outlet are located at the lower rear section of the furnace. Ihsdovz Hq Topfx Agfjw A maximum of 20 meters of ducting per pipe connection is allowed for air distribution.

Būklė: naujas, Gamybos metai: 2025, Dimensions (L x W x H): 720 x 1000 x 1900 mm Weight: 300 kg Total Power Requirement: 1.2 kW Hot Air Furnace MARTINA 55 The MARTINA hot air furnaces are an ideal solution for energy recovery in wood-processing industrial and craft businesses. They are designed to heat large areas, such as workshops and working spaces in trade and industrial operations. These hot air systems require no lengthy warm-up phases and can heat up workshop halls of joineries or carpentries, as well as other production facilities, in a very short time. Solid wood and its by-products (e.g. offcuts from solid wood panels, chips, sawdust, pellets, or briquettes) serve as fuel materials. The MARTINA hot air furnaces comply with EU Directive 98/37CE and Italian Presidential Decree No. 459 dated July 24, 1996, as well as the safety directive of 89/392 CE. All MARTINA series hot air furnaces (models 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350) meet both emission stages according to the 1st German Federal Immission Control Ordinance (BImSchV). - Automatic and continuous air operation - Thermal output: 49.9 kW - Thermal output Kcal: 43,000 - Fuel consumption: 15 kg/h - Air output: 4,900 m3/h - Combustion chamber depth: 650 mm Ihedjvz Hq Hspfx Agfow - Loading door: 370 x 350 mm - Hot air blower: 1.12 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Draft requirement at nominal output: 0.18 mbar - Heatable volume: approx. 1,000 m3 - Heatable area: approx. 220 m2 - Space requirement: Width 720 mm, Depth 1,000 mm, Height 1,900 mm - Weight: 300 kg - Flue pipe diameter (collar): 160 mm - Chimney diameter (recommended): 200 mm - Efficiency: 85–90% - Chimney discharge pressure: 13 PA - Flue gas temperature: 290°C - Hot air outlet spigots: 2 x Ø 200 mm - For additional technical data, please refer to the attached data sheet The two pipes for outgoing hot air are located at the lower part of the rear side of the furnace. A maximum of 20 meters of ducting per spigot is permitted for air distribution.

Būklė: naujas, Gamybos metai: 2025, Dimensions (L/W/H): 1700 x 2000 x 2550 mm Weight: 1400 kg Total power requirement: 4.5 kW Hot Air Furnace MARTINA 350 The MARTINA hot air furnaces are an ideal solution for energy utilization in wood-processing industrial and craft businesses. They have been developed for heating large utility areas, such as workshops and working spaces of trade and industrial enterprises. These hot air systems require no long heat-up phases and heat up woodworking shops, carpentries, and other production areas within a very short time. The furnaces can use solid wood and its by-products as fuel, e.g. solid wood panel residues, chips, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 dated July 24, 1996, and safety guideline Directive 89/392 CE. All hot air furnaces of the MARTINA series (15 – 30 – 55 – 85 – 120 – 180 – 240 – 350) meet both stages of emission limits stipulated by the 1st BImSchV. - Automatic and continuous air operation - Thermal output: 390 kW - Thermal output (Kcal): 335,000 - Fuel consumption: 85 kg/h - Air output: 20,000 m³/h - Combustion chamber depth: 1400 mm - Feed door: 500 x 700 mm - Hot air blower: 4.48 kW Ihodpfx Aovz Hqyogfew - Firebox negative pressure: 0.2–0.3 mbar - Flue draft requirement at nominal output: 0.18 mbar - Heatable room volume: approx. 7,500 m³ - Heatable area: approx. 1,600 m² - Space requirement: width 1700 mm, depth 2000 mm, height 2550 mm - Weight: 1400 kg - Flue pipe diameter (connection): 300 mm - Chimney diameter (reference value): 350 mm - Efficiency: 85–90% - Chimney draft: 11.5 Pa - Flue gas temperature: 289°C - Hot air discharge nozzles: 2 x Ø 450 mm - For additional data, please refer to the data sheet. The two pipe fittings for outgoing hot air are located at the rear of the furnace near the bottom. For each pipe fitting, a maximum pipe length of 20 meters is allowed for air distribution. Longer lengths are optionally available upon arrangement with the manufacturer. Please contact us for more details.

Būklė: naujas, Gamybos metai: 2025, Dimensions (L/W/H): 600 x 800 x 1900 mm Weight: 230 kg Total power requirement: 0.5 kW Hot Air Furnace MARTINA 30-15 The MARTINA hot air furnaces are an ideal solution for energy utilization in woodworking industrial and craft businesses. They are designed for heating larger functional areas, such as workshops and workspaces in craft and industrial facilities. These hot air systems require no long heat-up phases and warm up the workshop or production hall—such as those in carpentry, joinery, or other manufacturing environments—in a very short time. Suitable fuels include solid wood and its by-products, e.g. solid wood board offcuts, shavings, sawdust, pellets, or briquettes. The MARTINA hot air furnaces comply with EU Directive 98/37CE, Italian Presidential Decree No. 459 dated 24 July 1996, and the safety directive of installation 89/392 CE. All MARTINA series hot air furnaces (models 15, 30, 55, 85, 120, 180, 240, 350) meet both emission stages required by the 1st BImSchV (Federal Emission Control Ordinance). - Automatic and continuous air operation - Thermal output: 14.8 kW - Thermal output: 12,720 Kcal - Fuel consumption: 4.5 kg/h - Air flow rate: 2,400 m³/h - Combustion chamber depth: 580 mm - Loading door: 330 x 330 mm - Hot air blower: 0.49 kW / 230 V - Firebox negative pressure: 0.2–0.3 mbar - Draft requirement at rated output: 0.18 mbar - Heatable room volume: approx. 300 m³ - Heatable area: approx. 60 m² - Space requirement: width 600 mm, depth 800 mm, height 1900 mm - Weight: 230 kg - Flue pipe diameter (connector): 160 mm - Recommended chimney diameter: 200 mm - Efficiency: 85–90% - Chimney pressure: 11 Pa - Flue gas temperature: 286°C - Hot air outlet connectors: 2 x Ø 200 mm Ihsdpfsvz Hqtex Agfow - For further specifications, please refer to the attached data sheet The two duct connectors for warm air outlet are located at the lower rear side of the unit. A maximum pipe length of 20 meters per connector is permitted for air distribution.

Būklė: naujas, Gamybos metai: 2025, Dimensions (L/W/H): 600 x 800 x 1900 mm Weight: 230 kg Total power requirement: 0.5 kW Hot Air Furnace MARTINA 30 The MARTINA hot air furnaces offer an ideal solution for energy recovery in woodworking industrial and craft businesses. They are designed to heat larger usable spaces such as production halls and work areas in trade and industrial facilities. These hot air systems require no lengthy heat-up phases and can quickly warm up carpentry or joinery workshops as well as other manufacturing sites. Fuel types include solid wood and its by-products, such as remnants of solid wood boards, chips, sawdust, pellets, or briquettes. MARTINA hot air furnaces comply with EU Directive 98/37/CE, Italian Presidential Decree No. 459 of July 24, 1996, and the safety directive of Equipment 89/392/CE. All MARTINA series hot air furnaces (15 – 30 – 55 – 85 – 120 – 180 – 240 – 350) meet both emission threshold stages required by the 1st German Federal Immission Control Ordinance (BImSchV). - Automatic operation and continuous air mode - Thermal output: 29.8 kW - Thermal output (Kcal): 25,700 - Fuel consumption: 9 kg/h - Air output: 2,400 m³/h - Combustion chamber depth: 580 mm - Loading door: 330 x 330 mm - Hot air blower: 0.49 kW / 230 V - Firebox underpressure: 0.2–0.3 mbar - Draft requirement at nominal output: 0.18 mbar - Heatable volume: approx. 600 m³ - Heatable surface area: approx. 120 m² - Footprint: Width 600 mm, Depth 800 mm, Height 1900 mm - Weight: 230 kg - Flue outlet diameter (collar): 160 mm - Chimney diameter (reference value): 200 mm - Efficiency: 85–90% - Chimney draft: 11 Pa Ijdpfx Agsvz Hqmjfehw - Exhaust gas temperature: 286 °C - Hot air outlet connections: 2 x Ø 200 mm - For further technical data, please refer to the attached data sheet The two pipe collars for the outgoing hot air are located on the rear side of the furnace in the lower section. A maximum pipe length of 20 metres is permitted per collar for air distribution.

Būklė: naujas, Gamybos metai: 2025, Dimensions (L x W x H): 1300 x 1700 x 2550 mm Weight: 1200 kg Total connected load: 2 kW Hot Air Furnace MARTINA 240 Ihsdpfovz Hqgex Agfjw The MARTINA hot air furnaces offer an ideal solution for energy utilization in wood-processing industrial and craft businesses. They are designed for heating large usable spaces such as workshops and production areas in craft or industrial enterprises. These hot air systems do not require long heating-up phases and are capable of rapidly warming up joinery and carpentry workshops or other production facilities. The units can burn solid wood and its byproducts, e.g. offcuts from solid wood panels, chips, sawdust, pellets, or briquettes. MARTINA hot air furnaces comply with EU Directive 98/37/EC, Italian Presidential Decree No. 459 of 24 July 1996, and safety guideline 89/392/EEC. All hot air furnaces of the MARTINA series 15 – 30 – 55 – 85 – 120 – 180 – 240 – 350 fulfill both stages of the emission values required by the 1st BImSchV. - Automatic and continuous air operation - Thermal output: 233 kW - Thermal output (kcal): 199,000 - Fuel consumption: 50 kg/h - Airflow rate: 18,000 m³/h - Combustion chamber depth: 1200 mm - Loading door: 460 x 600 mm - Hot air fan: 1.96 kW / 230 V - Firebox negative pressure: 0.2-0.3 mbar - Nominal output draft requirement: 0.18 mbar - Heatable volume: approx. 4,500 m³ - Heatable area: approx. 900 m² - Space required: width 1300 mm, depth 1700 mm, height 2550 mm - Weight: 1200 kg - Flue pipe diameter (connection): 250 mm - Recommended chimney diameter: 300 mm - Efficiency: 85–90 % - Chimney fan pressure: 16 Pa - Flue gas temperature: 290 °C - Hot air outlet connections: 2 x Ø 450 mm - Further data available in the attached data sheet The two duct connections for outgoing hot air are located on the lower rear side of the unit. A maximum of 20 meters of duct per outlet is allowed for air distribution.

Būklė: naujas, Gamybos metai: 2025, Dimensions (L x W x H): 800 x 1170 x 2300 mm Weight: 650 kg Total power requirement: 1.05 kW Warm Air Furnace MARTINA 120 The MARTINA warm air furnaces provide an ideal solution for energy utilization in woodworking industrial and craft businesses. They have been developed for heating larger areas, such as workshops and production halls in both craft and industrial operations. These warm air systems require no lengthy preheating times and are capable of warming up joinery or carpentry workshops and other production facilities in a very short period. The furnace can be fueled with solid wood and its by-products, e.g. offcuts from solid wood panels, chips, sawdust, pellets, or briquettes. The MARTINA warm air furnaces comply with EU Directive 98/37/EC, Italian Presidential Decree No. 459 of July 24, 1996, and the safety guideline of Directive 89/392/EEC. All warm air furnaces in the MARTINA series (15 – 30 – 55 – 85 – 120 – 180 – 240 – 350) fulfill both stages of the emission limits required by the 1st Federal Immission Control Ordinance (BImSchV). - Automatic and continuous air operation - Thermal output: 145 kW - Thermal output: 125,000 kcal - Fuel consumption: 30 kg/h - Air performance: 9,000 m³/h - Combustion chamber depth: 950 mm - Loading door: 460 x 440 mm - Warm air blower: 1.05 kW / 230 V - Combustion chamber negative pressure: 0.2–0.3 mbar - Flue draught at nominal load: 0.18 mbar - Heatable room volume: approx. 2,500 m³ - Heatable area: approx. 500 m² - Required space: Width 800 mm, Depth 1170 mm, Height 2300 mm - Weight: 650 kg - Flue pipe diameter (connector): 200 mm - Chimney diameter (recommendation): 250 mm - Efficiency: 85–90% - Chimney draft: 16 Pa - Exhaust gas temperature: 287°C - Warm air outlet nozzles: 2 x Ø 220 mm Ijdpfsvz Hhxjx Agfehw - For further data, please refer to the enclosed data sheet The two pipe connectors for outgoing warm air are located at the rear bottom side of the furnace. A maximum pipe length of 20 meters per nozzle is permitted for air distribution.

Būklė: geras (naudotas), Immersion Heater - Power: max. 2000 W - Selector Switch: 12 positions - Housing: aluminium - Connection: 230 V - Weight: 5 kg Isdpfjb A Iavex Agfehw

Būklė: geras (naudotas), Heating blower, mobile heater, gas heater, gas blower - Output: adjustable from 50 to 100 kW - Length: 560 mm - Width: 350 mm - Height: 500 mm - Gas type: Propane - Quantity: 1 available - Price: per unit - Weight: 16 kg Iodpfxeb A Shxj Agfohw

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2012, Funkcionalumas: visiškai funkcionalus, galia: 50 kW (67,98 AG), įvesties srovės tipas: Oro kondicionierius, slėgis: 3 juosta, įėjimo įtampa: 230 V, nominali šilumos galia: 50 kW (67,98 AG), šildymo galia: 50 kW (67,98 AG), temperatūra: 95 °C, bakelio talpa: 175 l, darbinis slėgis: 3 juosta, Įranga: Tipinė plokštelė prieinama, Siūlome šį naudotą Guntamatic BMK 50 skaldytos medienos dujų generatorių, pagamintą 2012 metais. Galima naudoti iki 50 cm ilgio malkas. Komplekte yra du Guntamatic izoliuoti akumuliaciniai rezervuarai (po 1600 litrų), vamzdynai su maišymo vožtuvu ir Kroll šildymo ventiliatorius. Tipas: BMK 50 su automatiniu uždegimu Prekės numeris: 066-100 Serijos numeris: 315972 Pagaminimo metai: 2012 Nominali galia: 20-50 kW Katilų klasė: 3 Elektros jungtis: 230 V Srovės stipris: 13 A Leidžiamas darbinis slėgis: 3 bar Maksimali darbo temperatūra: 95 °C Kamino trauka: 0,2 mbar Vandens talpa: 175 l Kuras: natūrali skaldyta mediena 0,5 m ilgio Įrenginys buvo eksploatuojamas tik 4 savaites. Isdpfeyf U R Hsx Agfjhw Komplekte du izoliuoti rezervuarai (po 1600 l) ir vienas Kroll ventiliatorius. Įrenginys puikios, beveik naujos būklės, galima apžiūrėti veikiančią sistemą. Išmontavimas ir transportavimas pirkėjo sąskaita. Jei turite klausimų ar reikia daugiau informacijos, prašome rašyti mums žinutę arba paskambinti.

Būklė: labai geros būklės (naudotas), Stainless steel (VA) chimney cover, chimney cap Ijdpob Uhmvsfx Agfohw - Internal bracket spacing: 460 mm - Dimensions: 755/1065/H400 mm - Weight: 14 kg

Būklė: naudotas, Temperatūros reguliavimo įrenginys, skysčių temperatūros reguliavimo įrenginys, pramoninis temperatūros reguliavimo įrenginys, termolatorius, Tool-Temp TT134, naudota įranga Gamintojas: Tool-Temp Tipas: TT 134 Bendri matmenys: 390 x 1030 x 1070 mm Metai: 2012 Savybės: - Savikontrolės sistema (mikroprocesorius) - Automatinė išleidimo sistema - Temperatūros stebėjimas ir indikacija - Automatinis vandens papildymas - Nuotolinis ir vidinis temperatūros valdymas - Automatinis oro išleidimas - Darbo terpė – vanduo ir alyva Maks. temperatūra: 140 °C | 18–24 kW Aušinimas: 50 000 kcal/val. Iedpfox Emd Tjx Agfehw Didžiausias siurblio slėgis: 4 bar | 100 l/min

Būklė: geras (naudotas), Gamybos metai: 2011, Temperature control unit, heater, hot water boiler, hydronic system, hydraulic station for high-pressure cleaners, high-pressure pump Ijdpfx Ageqw D Dpsfjhw - Temperature control units for: water - Electric heater for: high-pressure cleaners, high-pressure pump - Manufacturer: Frigotrol - Model: S-TT 50/108-D - Output: 110 kW - Connection: - Permissible operating overpressure: 6 bar - Dimensions: 1548/890/H1630 mm - Weight: 380 kg

Būklė: naudotas, Heating fan, heater, heat exchanger, air heater, air blower, duct air heater, duct-mounted air heater, heating coil - Delivery: in as-is condition as inspected Ihsdpfx Aovrdr Nogfsw - Fan motor: missing - Manufacturer: Kampmann, air heater heat exchanger - Type: Tip 5000 - Output: kW - Fan: missing - Operating pressure: max 10 bar - Dimensions: 800/710/H740 mm - Weight: 27 kg

Būklė: labai geros būklės (naudotas), Gamybos metai: 2011, Parduodami veikiantys ir labai gerai išlaikyti sunkios naftos degikliai / naftos degikliai Weishaupt RMS7- (1965 kW) markės. Ihjdpfx Aeh Umbfsgfow Weishaupt: RMS7 - (1965 kW) Degiklio tipas: RMS7 Modelis: ZMD Galia: 450 - 1965 kW 40-175 kg/val. Pagaminimo metai: 2011 - Pristatymas galimas pagal pageidavimą - Visi techniniai duomenys matomi nuotraukose Pirmenybė teikiama pardavimui prekybininkams, įmonėms arba eksportui. Visa informacija pateikta be garantijos, galimos klaidos ar tarpinis pardavimas. Pardavėjas neatsako už spausdinimo ar duomenų perdavimo klaidas.

Būklė: geras (naudotas), Gamybos metai: 2007, Funkcionalumas: visiškai funkcionalus, galia: 7,63 kW (10,37 AG), bendras plotis: 2 300 mm, bendras ilgis: 4 000 mm, bendras aukštis: 3 000 mm, įvesties srovės tipas: trifazis, slėgis: 6 juosta, įėjimo įtampa: 400 V, nominali šilumos galia: 950 kW (1 291,64 AG), darbinis slėgis: 6 juosta, Įranga: Tipinė plokštelė prieinama, karštas vanduo, The Pyrtec boiler system features an underfeed stoker with an internal grate and burnout grate designed for universal application, making it particularly suitable for a wide range of fuels, from dry wood waste to wet forest wood chips. Max. water content w = 50% corresponds to a wood moisture u of 100%. The complete boiler system is type-approved (Approval No.: 02-221-512) with continuous quality control by TÜV and consists of the following components: FEED SCREW WITH BARRIER LAYER: The feed screw conveys the fuel into the firebed and grate area of the combustion block. The robust screw flights in the firebed area are made of heat-resistant chrome steel. The feed pipe is equipped with mounts for the back-burn thermostat and thermal extinguishing valve. Above the screw is the metering hopper with photoelectric sensor for level control of the fuel barrier layer, as required by TRD 414. The drive is provided by a maintenance-free helical gear motor with chain drive and dustproof chain guard. Accessories: Extinguishing valve with dirt trap. COMBUSTION BLOCK: The massive combustion block is multiply insulated with high-quality fireclay lining. The fuel feed and grate section consists of the firebed, degassing grate, and descending burnout grate. All these parts are made of highly heat-resistant cast steel (material no. 1.4868), at least 12 mm thick and individually replaceable. This type of primary combustion has proven itself especially for challenging fuels (moist sawmill residues, high bark content, etc.). Ash and foreign objects that fall through the grates can be easily removed from the outside via openings with sealed covers. The horizontal combustion chamber is optimally shaped for complete burnout and offers a large ash space. The furnace door is solidly built, very well insulated, and can be swung out for maintenance thanks to the heavy-duty double hinge. BOILER: Horizontal hot water boiler with three-pass design, mounted on the combustion block, insulated and elegantly clad. The insulated boiler front door allows for the installation of an oil or gas burner. Operating temperature: max. 120 °C Operating pressure: 3.0 bar Test pressure: 6.0 bar FLUE GAS DUST COLLECTOR PYRTEC-140 to PYRTEC-650: Constructed as an axial cyclone, fully insulated and attached to the boiler. Includes 2 insulated cleaning covers, quick-release ash container, and attachment flange for the flue gas fan. FLUE GAS DUST COLLECTOR PYRTEC-1000: Iedpfx Asxwhw Aegfjhw Also of axial cyclone design, fully insulated, free-standing for optimal placement. Includes 2 insulated cleaning covers, attachment flange for the flue gas fan, and connection for the ash container. FLUE GAS FAN: Fan specifically designed for wood combustion operation, very quiet, motor constructed in a robust, heat-resistant version with spring-mounted heat-dissipating hub. The fan housing can be infinitely rotated at the intake nozzle, outlet nozzle is round.

Būklė: geras (naudotas), Ventilation system, compact comfort ventilation unit Iedpjb A Hxmefx Agfjhw - Airflow rate: 6,000 m³/h - Motor power: 1.85 kW - Dimensions: 1950/1100/H1200 mm - Weight: 260 kg

Būklė: geras (naudotas), 6x Gogas DSF-C Dark Radiant Heaters – used – : Price per unit ex location: €1,500 (net) dismantled, packed, and loaded! Ihedpfx Aju T E Rdogfow Manufacturer: GoGas Model: Dark Radiant Heater DSF-C Year of manufacture: 2019 Category: I3P Gas type: G 31 (propane/butane) (according to the manufacturer, can be easily converted to e.g. natural gas by changing the nozzles, approx. €15 cost) Nominal heat input (Hi): 20/14 kW Voltage: 230V 50 Hz Power: 75 VA Nozzle: 2.25 mm Air shutter: 72 mm Nozzle pressure: 38.0 – 19.3 mbar NOx class: 3 Product ID No. e.g. CE 085 BL 0499 Serial number: e.g. 242585 Condition: good Available: from around mid-December 2024 Location: Simmern (Hunsrück)