Skerdenų presas

HOMAG MPH410/25/07

Sąlyga: naujas, Gamybos metai: 2025, RLA 400 VIBER Performance 11,300 m³ Capacity approx. 11,300 m³/h Motor power 11 kW / 15 HP Speed 3,000 rpm Extraction velocity 32 m/s Extraction nozzle diameter 355 mm Filter material: polyester Filter permeability: 5 micron Filter size: 160 x 935 mm Number of filters: 58 Chip container size: 500 x 500 x 600 mm – 3 units Voltage: 380V Dimensions: 1000 x 3000 x 2300 mm Weight: 630 kg Sound level: 85 dB unconnected / 70 dB connected + 850 euros for models with fire extinguisher (Safe System) Bdjdpfolkd Tfex Admok + 1350 euros for models with inverter (speed control)

Sąlyga: geras (naudotas), Gamybos metai: 2014, Naudojama korpuso presas - GANNOMAT Concept 70 Eco - Pagaminimo metai: 2014 Bsdpfx Adjxhc T Tjmedk - Bus galima įsigyti 2025 m. gruodį

Sąlyga: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, bendras aukštis: 4 000 mm, bendras svoris: 820 kg, keliamoji galia: 500 kg, This offer includes the following set (customizable configurations or the option to purchase the vacuum lifter or jib crane separately): - Vacuum lifter for panels, designed for handling MDF, laminated, raw, particle boards, etc. (model WOOD SYSTEM DS 250) - Stationary jib crane - Electric chain hoist - Manual trolley Features of WOOD SYSTEM DS 250 vacuum lifter: - Designed for plate handling - Cylinder for vertical-horizontal tilting - 6 suction pads, Ø 200 mm - Adjustable suction pad rail for customizing the working width to the size of the transported material - Beam length: 2500 mm - Each suction pad equipped with individual ball valve for selective deactivation - Air blast impulse for easy release, avoiding sticking effect - Individual X and Y axis adjustment for each suction pad - Control panel with: - Power on/off - Vacuum suction/release - Hoist lift/lower (thumb-operated) - Pressure gauge Bsdpfx Ajxln Dredmodk - Compressed air-powered venturi vacuum generators - Capacity: 400 kg - Device weight: 100 kg - CE certificate Stationary jib crane specifications: • Column height: 4 m • Height under arm: 4 m • Arm length: 4 m • Capacity: 400 kg • Slewing range: 270 degrees • Lifting speed: approx. 3 m/min • Colour: customizable (RAL palette) • Crane slewing: manual • Trolley: manual • Arm with double/quadruple needle bearings for smooth rotation • Chain hoist: electric • CE certificate INCLUDED: • Column-mounted jib crane • Single-phase electric hoist • Manual trolley • CE certificate • Complete documentation Standard 12-month warranty

Sąlyga: naujas, Gamybos metai: 2022, Exhibition machine Year of manufacture: 2022 Equipment and technical data: Base machine 7402 with Pin-Jet dowel insertion function Handheld control device 2D barcode scanner UPS (uninterruptible power supply) Quattro HSK package incl. 4-position tool changer XL drilling head Double drilling spindle in Y-axis automatic central lubrication Location: Hochheim Availability: approx. week 32/2022 Bdodpfxowt E Tvo Admek

Sąlyga: labai geros būklės (naudotas), FORMAT and EDGE BANDING LINE for ONE-SIDED POSTFORMING PROCESSING (FOR DIRECT PROCEDURE) Consisting of the following machines: A) Double-sided portal loading unit “TREVISAN” with motorized roller conveyor B) HOMAG one-sided POSTFORMING MACHINE FOR DIRECT PROCESS Model Profi VFL79/3/P/A - Maximum laminate thickness: 0.35 mm (for L and U profiles) - Workpiece thickness (min/max): 16 / 30 mm (optionally 50 mm) - Minimum workpiece width: 150 mm - Feed speed: 10 – 32 m/min - Control system: PC 22 / software package woodCommander - 01° Standard milling unit 2.2 kW (for scribing from above) - 02° Hogging unit 15 kW (for pre-hogging from above) 0° - 15° - 03° Standard milling unit 6.6 kW (for rebate milling above), motor shaft for hydro-locking tool holder - 04° Standard milling unit 6.6 kW (for rebate milling below) 0° - 120° (with hydro-locking) - 05° Radius milling unit 0.7 kW (for profiling the edges) - 06° Milling unit for top layer on U-profiles, HSK25 1.85 kW - 07° Universal milling unit UF 11 4 kW (for grooving or rebating) - 08° Milling unit 2.2 kW (for chamfer and laminate strip milling above) - 09° Milling unit 2.2 kW (for underside groove milling) - 10° RIGHT: Standard milling unit 6.6 kW (for grooving or rebating), working width 160 - 1050 mm - 11° RIGHT: Milling unit above and below 2 x 1 kW, 0° - 25° - 12° Workpiece cleaning postforming, blower 0.55 kW - 13° Laminate overhang monitoring (for detecting laminate breakout) - 14° Compact gluing unit PU34 + QA34, slot nozzle glue application - 15° Base unit pressure zone L-profile VF Direct for workpiece thickness max. 50 mm - 16° Base unit pressure zone for U-profile VF Direct for special profile R = 2.5 mm - 17° Top rotary knife - 18° Top milling unit 1 x 0.55 kW, 0° - 30° - 19° Top buffing unit with oscillation 1 x 0.25 kW C) Double-sided portal stacking unit “TREVISAN” with motorized roller conveyor Bdodpfx Adonzhxqsmok

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2002, I am selling a carcass press for furniture assembly, RAMARCH PN31, year of manufacture 2002. Maximum material size: 2500 x 1300 x 600 mm Electro-pneumatic operation. Manufacturer: RAMARCH, Spain (now DYNMA) Very good condition. Available immediately. Bjdpfx Adjh Iahcsmjdk

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2022, Funkcionalumas: visiškai funkcionalus, complete in standard configuration with: Bdodpfswx Nfgjx Admok - Robust, distortion-free steel frame in welded and bolted construction - PRESS BEAM LATERALLY with continuous pressure surface with 25 mm thick, coated support plate - Counterpressure surfaces (side pressure wall, base) are continuous 25 mm thick, coated support plates - Electrically motorised adjustment of the press beam via precision trapezoidal lead screws (with enhanced pitch and concentricity accuracy) and high-performance travelling nuts with grease reservoir - Pressing is performed electrically via a worm gear motor (0.75 kW) - The pressing force of the press beam is infinitely variable and electronically set via potentiometer and regulated by frequency converter, providing absolutely wear-free pressure control - Press force for vertical press beam minimum 300 daN (kg) up to infinitely adjustable maximum of 2200 daN (kg) - Pressing and adjustment speed of press beams with fine positioning, selectable via 3-stage switch: 5 / 10 / 25 mm/second - Easiest operation via two separate push buttons, two movement sequences (open/close) selectable via control system - Freely adjustable pressing time preselection with automatic opening 0–30 min (switchable to seconds or hours) - Working height/loading height 200 mm - Working dimensions: Length min: 150 mm, max: 1300 mm Height min: 150 mm, max: 1700 mm Depth: 700 mm Electrical connection: 400V, 3Ph, 50Hz (1.6 kVA, 16 A)

Gamybos metai: 1992, Sąlyga: labai geros būklės (naudotas), Maximum working width: 400 mm 4-knife cutterhead Table length: 2,500 mm Motor: 3 kW Bedpfohzx Erex Admjdk Power supply: 400 V Cast iron construction

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2000, mašinos/transporto priemonės numeris: WIL208, Techniniai duomenys: 1 Vetter AS koloninis sukamasis kranas, keliamoji galia 250 kg, su Demag DC grandininiu keltuvu Tipas: AS2,5-5.0 Nominali apkrova visiškai išskleistame stovyje: 250 kg / 0,25 t Bodoxcg Dxspfx Admedk Aukštis: apie 4,25 m Sijos apačios aukštis: apie 3,94 m Išsikišimas: apie 5 m Kablio aukštis: apie 3,5 m Bendras svoris: apie 900 kg su ankerine plokšte 110x100 cm Su Demag DC grandininiu keltuvu 250 kg Sukimosi diapazonas 270°, prijungimas prie 400V 16A Kranas išardytas ir iš karto prieinamas Prekės vieta: 75053 Gondelsheim Taip pat turime kitų kranų, keliamoji galia nuo 80 iki 5000 kg, teiraukitės Žiūrėkite nuotraukas Siuntimas per ekspediciją arba atsiėmimas tik pagal susitarimą

Sąlyga: naudotas, Gamybos metai: 2018, 1 unit CNC-controlled drilling, gluing and dowel inserting machine GANNOMAT "INDEX 130 PRO" (with options as Index 180 Pro) 400V, 3Ph, 50Hz, complete in standard configuration with: - Linear guide support consisting of: 1 pc. single-spindle horizontal drilling unit, 1.1 kW motor, tool speed selectable via operator software (3,000/5,000/8,000 rpm) 1 pc. reinforced blow-out, gluing and dowel inserting station for 8 mm diameter dowels, dowel length 30 mm - Fully automatic, electronically controlled centralized lubrication - X-axis NC controlled, with working length 1,300 mm, max. travel speed 78 m/min - Z-axis, position programmable over support table 5-40 mm, with option for NC-controlled Z-axis - Dowel insertion projection 7-20 mm, programmable with option of NC-controlled Y-axis Drilling depth from 0-35 mm (with drill length total 70 mm) is automatically set with dowel protrusion - Enclosed glue system with 6 bar glue pressure via glue nozzle, for glues with viscosity from 150 to 350 mPas - Glue quantity steplessly adjustable via operator software Bdedjxwaz Hjpfx Admek - Selector switch GLUE/WATER for rinsing the glue system, 1 stainless steel container each for 5 kg glue and 5 liters of water - Indicator lamp for glue level in glue container - 1 pc. side fence left, 1 pc. side fence right, and 1 pc. center fence (all removable) - 4 pcs. start buttons for individual operation with 1-4 workpieces - 4 pcs. pneumatic angled clamping cylinders 10°, for workpiece thicknesses up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 pc. extraction funnel, connection diameter 80 mm - 1 pc. TCT control with: integrated industrial PC, incl. Beckhoff TWINCAT Soft PLC, operating temperature range 0-50°C, 15" resistive TFT industrial touchscreen display, 1024 x 768 resolution, 2 GHz CPU, 256 MB RAM, 2x network interfaces, IDE hard drive, 4x USB rear, 1x USB front, operating system: WINDOWS 7 - Programming via menu-guided user software, freely programmable drilling distances with absolute, relative, or grid dimensioning, automatic workpiece mirroring and process optimization, 4 work zones assignable with different programs, graphical workpiece display, parametric programming, zero-point shifting, programmable job lists, plain text error diagnosis OPTIONS: - 1 electronic optical glue monitoring system G.I.C. (Glue Insert Control) for 1 glue nozzle - 4 additional vertical angled clamping cylinders 10° with bracket (total 8 clamping cylinders) - Surcharge for machine bed length 1,800 mm with working length 1,800 mm - Surcharge for: 1 horizontal drilling unit, 1.5 kW motor, with multi-spindle drilling head with 3 individually selectable drilling spindles, 32 mm centers in X-axis arrangement, tool speed 3,000 rpm (Standard working length not reduced) - 1 NC-controlled Y-axis, with ballscrew and dynamic travel speed 300 mm/sec. Via software, programmable dowel insertion projection 7-30 mm and drilling depth 0-42 mm (with drill length total 77 mm) for vertical drilling unit from above, Y-axis position 5-42 mm - Surcharge for NC-controlled Y-axis position 5-62 mm instead of 5-42 mm - Surcharge for: 1 vertical drilling unit from above, 1.5 kW motor, with multi-spindle drilling head with 3 individually selectable drilling spindles, 32 mm centers in X-axis arrangement, tool speed 3,000 rpm, Y-axis position 5-42 mm, workpiece length (Y) min. 130 mm (standard working length not reduced) - 1 NC-controlled Z-axis, with K