Kūno presas

GANNOMAT Concept 70 Eco

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2016, LAMELLA – CARCASE PRESS GANNOMAT "CONCEPT 70 ECO" Complete in standard configuration comprising: Kodpew Td A Ijfx Ag Asnd - Stable, torsion-resistant steel frame in welded and bolted construction - Top lamella press beam with 6 elements, side lamella press beam with 5 elements - Lamella press beams with proven tolerance compensation (Ganner system) for tightly compressed carcase joints - Counter-pressure surfaces (side pressure wall, base) are continuous, 38 mm thick coated support plates - Continuous pressing surface with a height of 95 mm on the bottom vertical press beam - Electromotoric adjustment of both press beams via precision trapezoidal threaded spindles (with enhanced pitch and concentricity accuracy) and high-performance lead nuts with grease reservoirs - Pressing is carried out electromotorically via 2 separate worm gear motors (2 x 0.75 kW) - The pressing force of the press beams is infinitely electronically adjustable via 2 potentiometers and controlled by frequency inverters, thus the pressing force regulation is absolutely wear-free - Pressing force for horizontal press beam min. 500 daN (kg) up to stepless max. 2200 daN (kg) Pressing force for the vertical press beam min. 300 daN (kg) up to stepless max. 2200 daN (kg) Pressing and adjustment speed of the press beams with fine positioning via 3-stage selector switch: 5 / 10 / 25 mm/second Easiest operation - Working height/loading height: 300 mm - Working dimensions: Length min: 150 mm, max: 2500 mm Height min: 150 mm, max: 1400 mm Depth: 700 mm Machine No. 563.624 400V, 3Ph, 50Hz (3.2 kVA, 16 A) Set of machine feet for working height of 500 mm Operating manual in German Completely overhauled by Ganner, parts warranty 6 months Location: ex stock 54634 Bitburg - immediately available -

Sąlyga: naujas, Gamybos metai: 2024, Super special price, as this machine was used during our in-house exhibition. Operating hours: 2 Immediately available – subject to prior sale. Once it’s gone, it’s gone. Compact design, high reliability, and an excellent price-performance ratio: these are the advantages of this machine, which is perfectly suited for briquetting materials such as wood, styrofoam, foam, or paper. A distinctive feature: the screw pre-compaction system ensures high briquette quality. For fast and easy installation, the C 140 is mounted on a stable base frame. Dimensions: 1900 x 1410 mm Hopper opening: 1044 x 1044 mm Hopper height: 1010 mm Hopper volume: 1.1 m³ Drive power: 4 kW Briquette diameter (mm): 40 Throughput (kg/h): 30–40 Hydraulic oil capacity (l): 100 Weight (kg): 530 Equipment: Press - Powerful pressing mechanism with low-wear, chrome-plated clamp - Pre-compactor with end-position damped cylinder and bolted cover - Control cabinet with PLC control Hydraulics - Separate oil tank with pump motor and valve control - Safety switch for oil temperature Container with agitator and geared motor - Screw channel with discharge auger and geared motor Accessories: - Briquette length monitoring, automatic on/off Kodpfxolht H Eo Ag Asnd Location: 54634 Bitburg

Sąlyga: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, Gannomat Concept 70 Eco Cabinet Press Year of manufacture: 2025 including the following options: - Rapid traverse speed: adjustment speed up to 50 mm/sec - Machine feet (working height 500 mm) The Concept Eco and Concept Primus are ideal assembly aids for dowel joints during carcass pressing, as well as for drawer production. Brief overview: • Field-proven tolerance compensation (GANNOMAT system) • Two potentiometers for infinitely adjustable pressing force • Minimum pressing force: 300/500 daN (kg) for Concept Eco, minimum pressing force: 600/800 daN (kg) for Concept Primus • Maximum pressing force: 2200 daN (kg) for Concept Eco, maximum pressing force: 3500 daN (kg) for Concept Primus • Three pressing and adjustment speeds: 5 / 10 / 25 mm/sec (with fine positioning / creep speed) • Freely selectable pressing time preset with automatic opening • Concept Eco: Simplest operation via six separate pushbuttons for eight movement sequences • Concept Primus: Simplest operation via LCD display Universal application: • Cabinets, e.g. for furniture and cupboards • Mitered carcases • Carcases with protruding tops • Drawers, drawer boxes • Simultaneous pressing of multiple cabinets / drawers Advantages: • Proven tolerance compensation (GANNOMAT system) • Electromechanical cabinet press with frequency-controlled gear motors Knedpfx Agevxgrrs Ajd • Independently adjustable vertical and horizontal pressing beams • Extended service life thanks to proven, high-quality components • Sturdy and robust construction • Space-saving design • Cabinet pressing = Simple + Fast + Efficient + Flexible + Precise + Professional • Easy to operate via straightforward and practical control panel • Fast thanks to beam positioning speeds up to 50 mm/sec (optional) • Efficient due to precise pressing of various carcass sizes • Flexible through adjustable parameters such as pressing force, pressing time, movement speeds • Precise due to angle-accurate pressing of furniture cabinets and drawers • Professional production of cabinets and drawers with a modern cabinet press

Sąlyga: naudotas, Gamybos metai: 2024, mašinos/transporto priemonės numeris: 1300.448, New demonstration machine! List price: €32,665 Fully equipped in standard configuration with: - Robust torsion-resistant steel frame in a welded and bolted design - Top lamella pressing beam with 6 elements, side lamella pressing beam with 5 elements - Lamella pressing beams with field-proven tolerance compensation system (Ganner system) for tightly compressed carcass joints - Counterpressure surfaces (side pressure wall, base) are 38 mm thick, coated, continuous support panels - Continuous pressing surface with a height of 95 mm on the lower vertical pressing beam - Electromechanical adjustment of both pressing beams via precision trapezoidal screw drives (with increased pitch and rotational accuracy) and high-performance slide nuts with grease reservoir - Pressing is performed electromotively by 2 separate worm gear motors (2 x 0.75 kW) - The pressing force of the beams is infinitely variable electronically by 2 potentiometers and controlled by frequency converter, making the pressing force regulation completely wear-free - Pressing force for horizontal beams: min. 500 daN (kg) up to stepless max. 2,200 daN (kg) - Pressing force for vertical beams: min. 300 daN (kg) up to stepless max. 2,200 daN (kg) - Pressing and adjustment speed of the beams with fine positioning, selectable via 3-position selector switch: 5 / 10 / 25 mm/second - Simplified operation via 6 separate push buttons, 8 motion sequences selectable through the control system - Freely adjustable pressing time preselection with automatic opening, 0–30 min (switchable to seconds or hours) - Working height/loading height: 300 mm - Working dimensions: Length min: 150 mm, max: 2,500 mm Height min: 150 mm, max: 1,400 mm Depth: 700 mm Weight: approx. 1,800 kg net Kedpfx Ageuf Hx Hj Asnd Dimensions (L x W x H): 3.45 m x 0.95 m x 2.30 m Electrical connection: 400V, 3Ph, 50Hz (3.2 kVA, 16A) Optional features: - Rapid traverse speed, for quick positioning of the pressing beams, controlled via automatic workpiece detection with sensors in the pressing beams; preseing speed 5 / 10 / 25 mm/sec and rapid traverse speed 50 mm/sec; sensors can be deactivated for pressing special parts - 1 set of machine feet (working height 500 mm)

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2007, Funkcionalumas: visiškai funkcionalus, briaunos storis (maks.): 10 mm, bendras svoris: 1 980 kg, aukščio reguliavimo tipas: elektrinis, Biesse Akron 440 Year of manufacture: 2007 Noise emission according to manufacturer: 88 dB (A) Rated power: 13 kW Extraction capacity according to AUVA: 565 m³/h Technical specifications: - Edge thickness: 0.4 - 10 mm - Feed speed: 12 m/min - Maximum edge banding height: 13 - 60 mm - Separating agent - Jointing unit - Edge magazine Knsdpfx Aswahhpog Ajd - Prepared for PUR adhesive - Tiltable end trimming unit 0-15° - Tiltable bevel/radius unit RS-501 - Contour milling - Radius scraper RBK 502 - Surface scraper RCC 701 - Buffing unit SP 501 - Electric height adjustment - Total connected load: 13 kW - Machine length: 4,200 mm

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2013, LAMELLA/CARCASS PRESS GANNOMAT "CONCEPT 70 ECO" Complete in standard configuration with: Carcass joints. - Counter-pressure surfaces (side pressure wall, base) are 40 mm thick, coated, continuous support plates - Electromotoric adjustment of both press beams via precision trapezoidal threaded spindles (with enhanced pitch and concentricity accuracy) and high-performance running nuts with grease reservoir. - Pressing operation is electromotorically driven by 2 separate worm gear motors (2 x 0.75 kW) - Pressing force: 2000 daN (kg) per pressing beam. - The pressing force of the beam is electronically regulated and set via frequency inverter, ensuring completely wear-free torque transmission. - Pressing and adjustment speed: 25 mm/sec. Kedpfxjw Tdyme Ag Aond - Simple operation via 6 separate push buttons, 6 motion sequences selectable via control unit. - Freely adjustable pressing time preset with automatic opening function 0-30 min (switchable to seconds or hours). - Working height/loading height: 300 mm - Working dimensions: Length min: 150 mm, max: 2550 mm; Height min: 150 mm, max: 1400 mm; Depth: 700 mm - 1 selector switch for variable pressing force 1000 / 1500 / 2000 daN (kg) Machine no. 380.324 400V, 3Ph, 50Hz (2.5 kVA, 16 A) Set of machine feet for 500 mm working height included Used machine: Year of manufacture 2013, completely overhauled by Ganner, 6-month parts warranty Special price: ex-stock 54634 Bitburg - Immediately available -

Sąlyga: naujas, Gamybos metai: 2025, Gannomat Concept 70 Eco Lamella Carcase Clamp with Rapid Traverse Technical Data: Lamella carcase press from our showroom; Kodpfxoiidm Ne Ag Asnd Working range: width from 150 to 2,500 mm, height from 150 to 1,400 mm; depth 700 mm; - Upper lamella pressure beam with 6 elements, side lamella pressure beam with 5 elements - Lamella pressure beams with proven tolerance compensation for tightly pressed carcase joints - Counterpressure surfaces are 40 mm thick, coated continuous support plates - The pressing force of the pressure beams is continuously electronically controlled via 2 potentiometers and set by frequency inverter, thus the torque transmission is completely wear-free. - Pressing force for horizontal pressure beams: min. 500 daN (kg) up to stepless max. 2,200 daN (kg) - Pressing force for vertical pressure beams: min. 300 daN (kg) up to stepless max. 2,200 daN (kg) - Including option: Rapid traverse speed for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors integrated into the beams; pressing speeds of 5/10/25 mm/sec and rapid traverse speed of 50 mm/sec; sensors can be deactivated for clamping special parts. - Inch mode for precise positioning of both pressure beams, e.g. for low pressing forces, drawers, and carcases at 45 degrees. Simple operation via 6 separate push-buttons, freely adjustable pressing time preselection with automatic opening, feeding height 300 mm. The machine is on display in our showroom and available for immediate delivery. Location: ex stock 54634 Bitburg - immediately available -

Sąlyga: labai geros būklės (naudotas), MEMBRANE PRESS For laminating MDF-style panels with PVC, PP, and PET with VARIOPIN fully automatic pin system Automatic front loading/unloading and preparation table (Double tray carriage 1500 x 2800 mm) Max. total pressing force: 2,400 kN Operating pressure: 320 BAR Panel dimensions mm: 1500 x 2800 mm Usable working area mm: 1250 (or 2 x 600) x 2550 Front loading width from 1500 mm (usable width 1250 mm) Kjderwxz Rjpfx Ag Asnd Separate control cabinet and controls (with electronic programming device) SIEMENS SIMATIC panel touch Total installed power approx. 50 kW OPTION “Paternoster” roller magazine Roll unwinder (roll holder) with coating film cutting system

Sąlyga: naujas, Tipas: 1000-2S Darbinis plotis: 1000 mm Knodjm Dr Rnspfx Ag Aed Minimali darbinio ruošinio ilgis: 400 mm Darbinis storis: 2–80 mm Šlifavimo volo greitis – dažnio valdymas Padavimo greitis: 5–20 m/min Bendra variklių galia: 4,12 kW Transportavimo matmenys: 1700 × 1600 × 1400 mm Svoris: 800 kg Kaina: 4130 Eur (EXW Jonava, Lietuva)

Sąlyga: naudotas, Gamybos metai: 2009, HOLZ-HER Edgebander CONTRIGA 1366 Edge thickness: 0.4–30 mm (depending on equipment) Edge height: 51/66 mm (depending on equipment) Panel thickness: 6–45/60 mm (depending on equipment) Edge types: Coil and strip material Feed speed: Infinitely variable feed from 12–30 m/min (depending on equipment) - With adjustable infeed table in the magazine area (max. adjustment range 30 mm) - With height-adjustable magazine disc for modifying the lower edge overhang - Large magazine disc Ø 820 mm for edge coils up to Ø 800 mm - With transport chain incl. automatic central lubrication - With motor-driven, position-controlled bridge height adjustment - With pneumatic stop roller for shortest workpiece spacing - With extendable workpiece support (extension length 1600 mm) - With space-saving, pneumatically operated sliding hoods over the entire machine (deviations possible on individual aggregates) - With motorised infeed fence - With spray oiler for lubricating all joints and bolts (including operating hour counter) - With central connection for extraction (2x Ø 200 mm) - With integrated chip collection box at the end of the machine (when radius scraper unit installed) Control PPC 231 - Power PC for efficient setup and tool changes - 15” SVGA touch screen - CF memory card 128 MB - USB port on board - Ethernet network connection - Keyboard connector on board - Windows-like user interface - All information in clear text and/or graphics Kjdpfx Agevvkfdj Aend - Rotatable and swivelling operator console at eye level - Dust-proof membrane keypad with soft keys (pushbuttons) - LED indicator for aggregate preselection - Program list with program names and numbers - Extensive program memory - Individual selection of aggregates with functions for basic settings, set point values, position points, and tool corrections, as well as fixed position points - Setup operations for aggregates and axis settings centrally and clearly via fine adjustment (depending on equipment) - Interval display for minimum workpiece distance - Integrated position control - Position points generally or program-specifically controlled - Clear and complete capture of all operating data - Service messages in plain text - Diagnostic system - Incl. integrated synchronous bus system for high accuracy in aggregate control - Individual management for up to ten users, incl. password protection - Online maintenance (optional), data exchange with HOLZ-HER Service - Barcode interface (optional) BASE MACHINE CONTRIGA 1366 – Belt bridge Options and accessories for the base machine Spraying unit 1856 for infeed and outfeed area For the infeed area: Electronically controlled separating agent spray unit with separating agent Riepe-LPZ/II For the outfeed area: Electronically controlled cleaning agent spray unit with cleaning agent Riepe-LP163/93 (only in combination with jointing milling unit 1961 and flat scraper 1964) Jointing milling unit Jointing milling station 1803 (2x 2.6 kW, 200 Hz, 12000 rpm) - With two plunge-controlled milling units - 1 unit counter-rotating - 1 unit co-rotating - Plunge depth 5 mm - With static frequency converter 200 Hz - Without milling cutters - With ProLock screw-in chuck for quick tool change Tooling for 1803 (workpiece height up to 60 mm): Diamond cutters PRO UT, 2 pcs. (front and rear) incl. protective hoods Ø 100–63 - Ø 30 mm, Z = 3 + 3 + 3, 1x LH, 1x RH Noise-reduced cutter with integrated chip guide, DFC technology (Leitz system) Maximum chip removal 2 mm at 60 mm height