Vienpusės kraštų apklijavimo mašinos

HOMAG KAL 310/7/A20/S2

Sąlyga: geras (naudotas), Gamybos metai: 2008, Funkcionalumas: visiškai funkcionalus, briaunos storis (maks.): 20 mm, produkto aukštis (maks.): 60 mm, gaminio plotis (maks.): 55 mm, TECHNICAL DETAILS Type of applied edge: thin edge, thick edge, solid wood Glue system: EVA Joint trimming: yes Multi-function unit: yes Number of working units: 8 Panel thickness: 12 - 60 mm Panel width: min. 55 mm Edge thickness: 0.3 - 20 mm Feed speed: 24 m/min Pressure: rubber-coated belt Panel Guidance Panel support guide: yes With NC positioning: yes Installed units in format cutting section Unit: Corrections Automatic engagement by time: yes Additional systems Edge preheating lamps: yes Coil magazine: yes Number of positions: 2 Hot melt glue pot: yes Hot melt prefeeder: HOT MELT A34 Edge press roller track: yes Installed units in edge processing section Number of units: 6 Unit 1: End trimming Manufacturer model: HL 81 Number of motors: 2 Motor power: 0.8 kW Speed: 12,000 rpm Unit 2: Top milling unit Bcsdpfjv Eakhox Agiow Number of motors: 2 Motor power: 1.5 kW Speed: 12,000 rpm Unit 3: Multi-function unit Manufacturer model: FK 13 Number of motors: 2 Automatic tool change: yes With NC positioning: yes Machining speed: 20 m/min Motor power: 0.4 kW Speed: 12,000 rpm Unit 4: Edge scraper Manufacturer model: MN 21 With NC positioning: yes Unit 5: Glue scraper Unit 6: Buffing unit Number of motors: 2 Motor power: 0.18 kW Speed: 14,000 rpm Additional systems Spray unit: RIEPE LP 163/93 Control system: PC 22 CE-marked: yes

Sąlyga: geras (naudotas), Gamybos metai: 2002, Edge banding machine with jointing cutters, otherwise fully equipped. PU adhesive can be used. Bcedjgmn H Ajpfx Agijw

Sąlyga: naujas, Geriausia kaina: 4499 Eur (EXW Jonava, Lietuva) Stumdomo stalo matmenys – 2200 x 375 mm Didžiausias apdirbimo ilgis – 1500 mm Atstumas tarp pjūklo disko ir išilginės liniuotės – 1140 mm Pjūklo disko skersmuo – 400 mm Pjovimo aukštis (90°) – 115 mm Pjovimo aukštis (45°) – 105 mm Pagrindinės ašies apsisukimų skaičius – 4500/6000 aps./min Pagrindinės ašies skersmuo – 30 mm Pjūklo disko pasukimo kampas – 0–45° Pjūklo disko pakėlimas/nuleidimas – elektrinis valdymas Pagrindinio variklio galia – 5,5 kW Įpjovimo pjūklo disko skersmuo – 120 mm Įpjovimo disko apsisukimų skaičius – 7000–8000 aps./min Įpjovimo veleno skersmuo – 20 mm Bcodpfx Aodnxydsgijw Įpjovimo variklio galia – 1,1 kW Svoris: 700 kg * Naudojant 400 mm disko pjūklą, mažesnį diską reikia nuimti. Sumažintam pjūklui rekomenduojama nenaudoti didesnio nei 350 mm pagrindinio apsauginio gaubto.

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 007517, Type of edge applied: thin edge, thick edge, solid wood Adhesive system: EVA, hot air Jointing milling unit: yes Bodpfjwuz E Rox Agiecw Multifunction unit: yes Top milling unit: yes Max. feed rate: 18 m/min Maximum panel thickness: 60 mm Working units: 9 pcs

Sąlyga: labai geros būklės (naudotas), Four-sided planer Weinig - Maximum planing width: 230 mm - Maximum planing height: 120 mm - 5 heads: bottom - 5.5 kW; left and right - 11 kW; top - 11 kW; bottom - 5.5 kW - Feed motor: 4 kW Bcsdpfx Agerigxysiew - Fully adjustable heads - Electrically adjustable height and planing width - Spindle diameter: 40 mm - Feed via cardan shafts with stepless adjustment - Robust planer by WEINIG - Machine length: 415 cm - Machine inspected and in original condition

Sąlyga: naudotas, Gamybos metai: 2015, NC 1000 Numerical Control, Biesse Works Advanced Software Working field in X-axis: 4300 mm - X-axis travel: 5365 mm Working field in Y-axis: 2205 mm - Y-axis travel: 2749 mm Working stroke in Z-axis: 160 mm - Z-axis travel: 385 mm FT-Nesting full-plane worktable Automatic loading system with side lifting table Automatic labelling unit for barcode printing Automatic printing and application system for adhesive labels No. 1 vertical electrospindle with pre-setting for 4 axes (C-vector axis), with automatic tool changer, HSK F63, 12 kW, incl. flange for aggregate use Knife unit integrated into the drilling head on X-axis – diameter 120 mm Automatic tool change system with 8 positions – positioned on the machine operator head Automatic tool change system with 21 positions – positioned on the rear of the machine with chain Drilling head BH 40 L with independent spindles, arranged as follows: – No. 17 vertical in X-axis – No. 12 vertical in Y-axis – No. 6 horizontal in X-axis – No. 4 horizontal in Y-axis Automatic unloading system with motorized conveyor belt Front protection and safety system with mats and limiting nets Automatic lubrication system Air conditioning for the control cabinet Bjdpfxjwt Snys Agiscw No. 2 vacuum pumps with 250 m³/h each

Sąlyga: naujas, Gamybos metai: 2022, New machine Year of manufacture: 2022 Standard equipment: - Electrically operated height and tilt adjustment, 0–46° with automatic correction of cutting height during tilting - Control unit at eye level, swiveling - Double roller carriage, carriage length 3,000 mm Bedpfew I Uxcjx Agijcw - Rip fence, manually adjustable via measuring scale, including manual fine adjustment, cutting width 1,000 mm - Crosscut fence with fixed 90° position, manually adjustable via measuring scale up to 3,200 mm - Maximum saw blade projection: 150 mm - Maximum saw blade diameter: 450 mm - Drive power: 4 kW (5.5 HP) at 4000 rpm - AKE clamping system for the main saw blade - Working height: 91 cm Motor: 5.5 kW (7.5 HP) with VARIO F45 - Stepless speed adjustment from 2,000 to 6,000 rpm - Exact adaptation of speed to the material increases cutting quality and saw blade service life Extended cutting height for one-sided tilting: This option is equipped for one-sided tilting with a large extraction hood allowing a maximum saw blade diameter of 550 mm and a maximum blade projection of 204 mm. In combination with a scoring unit, maximum saw blade diameter is 500 mm, maximum cutting height 179 mm. Only available in combination with at least 5.5 kW (7.5 HP) drive power. 2-axis scoring unit for single-sided tilting - With electromotive height and lateral adjustment, scoring blade height programmable with rapid lowering and lifting, drive motor 0.75 kW (1 HP), 8200 rpm. Retrofit only possible on machines prepared for scoring unit. LED lighting - Highly energy-efficient LED technology for clearly marking the hazardous area of the scorer. The Altendorf double roller carriage is renowned for its smooth operation and precise running. It can be locked steplessly in any position. The large double rollers, precision-manufactured from hardened steel, keep the upper carriage absolutely precisely aligned with the lower carriage on their respective hard-chromed round guide bars. This quality of movement is maintained even after decades of use and contamination. The carriage construction features a highly torsion- and shape-resistant multi-chamber system. The table surface is precisely planed and anodized. A hard-chromed round bar, positively fitted to the upper carriage, serves as a mount for the cross-slide and as an interface for various accessories. The entire unit is low-maintenance and requires no lubrication. On/Off switch on double roller carriage - The On/Off switch is always within easy reach. With four buttons, both the main saw blade and the scorer can be switched on and off. This saves steps and increases safety. Angle-mitre fence, crosscuts up to 3500 mm - This ALTENDORF-patented fence with integrated length compensation makes it easy to cut mitres and angles precisely in one function. In both positions, the swing angle is infinitely adjustable by up to 49° and is displayed via a measuring scale. The backlash-free and robust folding stops can be easily shifted and, as single stops, set along the full length up to a maximum of 3,500 mm.

Gamybos metai: 1998, Sąlyga: labai geros būklės (naudotas), I am selling the following window manufacturing set: - 1 unit Mortise and Tenon Machine Weinig Unitec 10. - 1 unit Profile Shaping Center Weinig Univar 10. Bedpfx Agsfzzhysiocw Year of manufacture: 1998. Milling heads from OERTLI. Available immediately. Price for the complete set: €17,000. Condition: very good!

Sąlyga: labai geros būklės (naudotas), Panel dividing saw – horizontal – with rear lifting table Control system: MCS Evolution Software included Powered roller conveyors (approx. 4500 x 2200 mm) Lifting table (mm): 4300 x 2200 Panel rotating device (for sheets) up to 90° No. 2 rear pushers (1 with grippers) Program pusher dividing No. 10 grippers Max. cutting width (mm): 4300 Useful pusher stroke (mm): 4300 Max. saw blade projection (mm): 135 Max. gripper opening (mm): 133 Bjdpfsq Rfahsx Agiscw Scoring saw (max. saw diameter): 20 mm Main saw (max. saw diameter / power): 460 mm / 27 kW Adjustable saw carriage feed (m/min): 0 – 150 No. 4 front air flotation tables Total connected load (kW): approx. 36

Sąlyga: naujas, Dimensions (LxWxH): 2480 x 1230 x 65 to 105 mm Bcsdpfx Agofk Ah Nsiew Width: 1230 mm Length: 2480 mm Approx. weight: 675 kg Welding and assembly tables of the SMT flex series are robust, height-adjustable, and practical workstations designed for machining heavy workpieces, handling electric power tools, or working with chemical or oily substances. Thanks to transport bars integrated into the base, the tables can be easily relocated using a pallet truck and can be quickly adjusted in height to match other work surfaces. Height adjustment ranges from 650 mm to 1,050 mm (lower heights available on request). The solid steel tabletop, up to 20 mm thick, withstands even heavy impacts or blows—such as those commonly encountered when working with heavy hand tools or handling very heavy metal workpieces or tools—without suffering lasting deformations or indentations. The metallic work surface enables unrestricted use of magnetic clamps for securing components. Due to its substantial deadweight, this versatile table provides excellent stability against tipping—even when loaded with heavy items or tools at its maximum height position. For accessories and further information, please follow this link: