Edgebander

HOMAG KAL 210 AMBITION 2264

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2010, Funkcionalumas: visiškai funkcionalus, ruošinio aukštis (maks.): 60 mm, briaunos storis (maks.): 20 mm, ruošinio plotis (maks.): 60 mm, The machine has been serviced and is in excellent condition. It is ready for immediate use! TECHNICAL DETAILS Bonded edge thickness: max. 20 mm Maximum gluing height: 60 mm Maximum roller material thickness: 3 mm Workpiece width: min. 60 mm Maximum feed speed: max. 25 m/min Feed: continuous Electrical height adjustment: available Nedpfexg Ix Sox Abfedd Pressure: upper belt pressure Preheating zone: available Granulate glue system: with prefabricated container Glue pot: interchangeable/variable Spray unit: available Pre-milling unit: available Trimming unit: with 2 motors Milling stations: flush/radial/chamfer, 1 available Corner copying unit: with 2 motors Edge scraper: profile and planer Polishing unit: available Strip magazine: available Units: synchronized units with NC axis/axes Machine version: left-hand side Quick change units: available MACHINE DETAILS Remote control: PowerControl PC 22 Weight: 5,000 kg Machine length: 7,845 mm Standards: CE regulations EQUIPMENT - Special equipment: with nesting - new chains - HOMAG feed device 2 rollers - HOMAG A 20 gluing unit - HOMAG HL 84 - HOMAG FK 11 - HOMAG profile pull scraper unit PN 10 - HOMAG FA 11 finishing unit

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 007618, Max. panel width: 4400 mm Ndsdpfxou N Slis Abfod Max. panel length: 4400 mm Max. main saw blade projection: 72 mm Number of clamps: 6

Sąlyga: naudotas, Gamybos metai: 2014, Power Control PC 22 control system with WoodWop – POWERTOUCH software. Panel height: 8 - 60 mm. PVC/ABS thickness: up to 3 mm. Feed speed up to 25 m/min (20 m/min with contour trimming). Electronically adjustable working height via CNC. Motorized, rubberized pressure belt with superior hold. Panel support guide for easier handling and introduction of small panels. Controlled entry guide. Anti-adhesive unit. Pre-milling unit with two motors (each 3 kW, 9000 rpm). Roller-bearing glue application unit for PUR adhesive, including premelter and glue tank. Edge pressing unit for straight profiles with CNC-actuated pressure rollers. Trimming unit with two motors (automatic tilt adjustment). Overlapping end trim unit with two motors. Rounding unit with two multifunction motors (flush trimming and rounding) with CNC control. Scraper unit for edges. Glue scraper unit. Buffing unit. Anti-adhesive unit. TECHNICAL DETAILS NEED TO BE VERIFIED. Ndedpfx Absvqbh Ejfjd

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 006849, Type of applied edge: thin edge, thick edge, solid wood Ndsdpfx Aewd Itmsbfod Adhesive system: EVA Jointing unit: yes Multifunction unit: yes Maximum feed speed: 25 m/min Maximum panel thickness: 60 mm Working units: 7 pcs

Sąlyga: naudotas, Working width: 1350 mm Number of sanding units: 2 pcs. Max. workpiece thickness: 160 mm Abrasive belt dimensions: 1370 x 2150 mm Feed motor: 0.75 HP Nedpfx Abermucxjfodd Unitek Excel LC 1370 2N RKRT MODEL: Excel 2NRKRT 2-BELT MACHINE 1st BELT: ROLLER 2nd BELT: COMBINATION UNIT ROLLER/PAD FOR SOLID WOOD, VENEER, AND INTERMEDIATE LACQUER SANDING - Usable WORKING WIDTH mm: 1350 - SANDING BELT LENGTH mm: 1370 x 2150 - MAX. WORKPIECE THICKNESS mm: 160 - STEEL CALIBRATION ROLLER mm: 180 - Rubber-coated SANDING ROLLER mm: 180 - SANDING PAD WIDTH mm: 50 - BELT MOTOR POWER kW: 14.7 - BELT SPEED m/s: 18/16 - FEED MOTOR POWER HP: 0.75 - Variable speed drive for feed carpet, continuously adjustable SPEED m/min: 4/20 - HEIGHT ADJUSTMENT MOTOR HP: 0.33 - Mechanical BELT OSCILLATION “ECO GEAR PATENT SYSTEM” - 1 pc. DRUM BRAKE for belt braking - Pivoting ROLLER for belt tensioning - 3 pcs. PRESSURE ROLLERS; rubber-coated - EMERGENCY STOP STRIP at infeed - ELECTRONIC DISPLAY of workpiece thickness - 2 pcs. ROLLER TABLES with 2 rollers each at infeed and outfeed - AUTOMATIC CENTERING OF FEED CARPET - 1 EXTRACTION PORT with 160 mm diameter - AUTOMATIC TABLE POSITIONING PLEASE NOTE: New patented belt oscillation system: 1. Without valves 2. Without photoelectric barrier 3. Not sensitive to dust 4. Energy-saving, environmentally friendly system Since 2008, the machine model with this system operates continuously without lateral belt run-off! - Unitek steel calibration roller (same for all models) - Unitek flexible pressure pad before and after the roller (same for all machines with 1 roller) - Unitek grit compensation with mechanical grid-set with 6 positions (per piece – same for all models) - Unitek electronically segmented sanding pad with 24 segments (sanding width 1350) - Unitek belt motor power up to 18.4 kW instead of 14.7 kW (per motor) - Unitek surcharge for 2nd motor 14.7 kW (only for Excel 2-belt) - Unitek automatic table lowering in emergency stop (same for all models) - Unitek surcharge for frequency-controlled feed speed - Unitek surcharge for infeed/outfeed roller table with 4 rollers (same for all models) - Price per roller table - Unitek electronic control of machine functions with 12" touchscreen (same for all models) Automatic workpiece scanning with feed control --- Machine price in above configuration upon request! --- Options at additional cost: Surcharge for 3-belt machine Roller-Roller-Pad (Mod. 049): €8,390.00 Freight costs: €1,300.00 Assembly and instruction: €1,300.00 --- All prices stated are net prices plus statutory VAT (19%) --- (Technical data as per manufacturer – subject to change and errors excluded!)

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2020, We offer you the following: Deburring Machine Manufacturer: Viet Model: SV3-4.3 RVXR Year of manufacture: 2020 Technical Data and Features: - Abrasive belt change on the left side of the machine - Tool kit - Digital thickness display - Material at the infeed too strong - Electro-pneumatic control of oscillation - Air filter with condensate separator and automatic drain - Maintenance-free pneumatic system - Pneumatic lifting and lowering of units when switching aggregates on or off - Machine with head adjustment (fixed working height 900 mm) - Lifting system on 4 columns (spindle) with chain drive - Table extension at front and rear, each with 1 roller - Industry 4.0 (LAN) package with network LAN connection - Working width: 1350 mm - Machine with movable head - Centesimal stroke system with inverter - Usable working height 160 mm - LED lighting inside the machine - Electronic belt control for longitudinal units - Calibration sanding unit with sanding roller, diameter 190 mm, belt length 2620 mm - Electromechanical grit setting - The frequency converter allows adjustment of the sanding belt speed - V-Spin unit with 15-disc sanding system / diameter 80 mm The V-Spin unit consists of 15 disc brushes arranged in a row and moving counter-rotating to each other. By combining these two movements, the V-Spin unit is suitable for rounding sharp edges and removing slag or oxides. - 16 backing pads for V-Spin units, diameter 80 mm, Scotchbrite + abrasives, grit size 80 - 16 backing pads for V-Spin units, diameter 80 mm, Tampico + grit size 80 - X-Spin unit / sanding system with 15 discs / diameter 123 mm The group consists of 5 rotating heads, each head containing 3 pads of rotating sanding brushes, diameter 123 mm. - Oscillating Scotch-Brite brush - Linear cleaning systems - Conveyor belt Feed speed 1.1 kW (1.5 HP), speed 0.5-7 m/min Conveyor belt made of HYPALON rubber, heat- and oil-resistant, hardness 60 Shore, smooth surface - Belt cleaning blower for conveyor carpet, incl. vacuum extraction - IPC MONITOR 15" touch-screen control for operating the machine, up to max. 10 processing units. The control manages the following processes: - Start sequence of the selected drive motors - Storage of up to 1000 processing programs - Automatic positioning of the working thickness regulator - Acoustic and visual signal when machine operation starts - Operating hours counter Ndsdpfx Ajv Hxrgebfsd - Automatic control of feed speed depending on processing performance (expressed in sqm). This enables, based on statistic data, a longer service life of the sanding belt. The machine is in very good condition and comes with 2 Euro pallets of new sanding belts. Accessories, tools and clamping devices shown are only included in the scope of delivery if mentioned in the additional information. Technical specifications and details may be subject to change and errors. Subject to prior sale!

Sąlyga: naudotas, No. 3248 Horizontal Panel Saw HOLZMA Optimat HPP 380/38/38 Used, year of manufacture: 2003 Machine is still in operation, expected to be available from 19.01.2026 Cutting length: 3800 mm Cutting width: 3700 mm Saw blade projection: 95 mm Main saw motor: 13.5 kW Scoring saw motor: 2.2 kW Main saw blade: 380 x 4.8 x 60 mm Scoring saw blade: 180 x 4.8 – 5.8 x 45 mm 7 clamps 3 air cushion tables, 1 with angle stop 3 roller elements at the LKT front side Control software: Schnitt Profi(t) 9.0 / CADmatic V3.0 15" monitor (replaced in January 2025) V program pusher up to 80 m/min V saw carriage up to 130 m/min Machine dimensions: 7205 x 6100 mm (L x W) Sale on behalf of customer, ex-location near 90471 Nuremberg, without dismantling, transport, or assembly Dismantling, loading, and transport by us possible as an option Nodpsxrglnofx Abfodd Errors in description and price excepted To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sale in as-is condition Technical data, condition description, year of manufacture, and scope of delivery according to manufacturer brochure or previous owner, without guarantee Subject to prior sale No warranty for used machines; the principle applies: "sold as inspected" Pictures and videos are for example purposes and do not represent the actual scope of delivery Terms of payment: Prices plus statutory VAT, payment before collection or shipment Delivery terms: ex location

Sąlyga: naudotas, Gamybos metai: 2020, Used machine Year of manufacture: 2020 Equipment and technical data: Extendable workpiece support, distance 600 mm Jointing milling unit FG201 with 2 milling heads for jointing the panel edge Cutter diamond 70 x 64 x 30 mm, Z2 + 2, left rotation, Air Stream System (HOLZ-HER / LEUCO patent) Cutter diamond 70 x 64 x 30 mm, Z2 + 2, right rotation, Air Stream System (HOLZ-HER / LEUCO patent) Nedpfx Abow Nafdsfsdd Edge feeding unit 1903 automatic transport for roll and strip material GJ301 gluing system with sensor-controlled nozzle Automatic reloading function, fill level monitoring with automatic glue reload function Pressure unit 1912-3 pneumatic, first roller driven with pneumatic immersion control End trimming unit 1918 (60 mm) pneumatic, chamfer trimming 0/10 degrees, pneumatic adjustment Extraction hoods for end trimming unit 1918 Multifunctional milling unit FR201 (2 x 0.6 kW, 18000 rpm) for flush, radius and radius run-out milling Corner copying unit 1832 (1 x 0.35 kW, 200 Hz, 12000 rpm), corner copying function up to 3 mm edge thickness Cutter, diamond 53 mm x 10 mm x 16 mm, Z = 3, R = 2 mm, with CM technology (LEUCO system) with integrated chip extraction, for profile milling unit 1832 Scraper unit 1929 Chip collection box HW indexable inserts for scraper holder R = 2.0 mm (2 pcs required) FK701 flat scraper HM Location: Solingen Availability: Short-term

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 007687, Type of attached edge: thin edge, thick edge, solid wood Glue application system: EVA, hot air Jointing milling: yes Njdpfx Aswuz Npebfsdd Multi-functional unit: yes Maximum feed speed: 18 m/min Maximum panel thickness: 60 mm Working units: 7 pcs

Sąlyga: labai geros būklės (naudotas), rida: 186 225 km, galia: 110 kW (149,56 AG), pirmoji registracija: 10/2015, kuro tipas: dyzelinas, ašių konfigūracija: 4x2, kuras: dyzelinas, ratų bazė: 2 800 mm, vairuotojo kabina: dieninė kabina, pavaros tipas: mechaninis, emisijos klasė: Euro 6, krovinių skyriaus plotis: 2 310 mm, krovimo vietos ilgis: 3 670 mm, krovos erdvės aukštis: 510 mm, Gamybos metai: 2015,