Valdymo kortelė

Homag 2

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2011, mašinos/transporto priemonės numeris: 0-201-50-1289, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 6 000 mm, Y ašies eiga: 1 400 mm, valdiklio modelis: POWERCONTROL PC 85, plokštės aukštis: 300 mm, veleno greitis (maks.): 24 000 aps./min, No reserve price – guaranteed sale to the highest bidder! CNC machining center for milling, drilling, and edge banding! Machine collection must take place between 10/06/26 and 30/06/26! TECHNICAL DETAILS Working area X-axis: 6,000 mm Working area Y-axis: 1,400 mm Maximum panel pass-through height: 300 mm Travel speed X-axis: 80 m/min Travel speed Y-axis: 80 m/min Travel speed Z-axis: 30 m/min Number of controlled axes: 5 axes Number of work zones: 4 Maximum edge height: 65 mm Number of drilling units: 1 Total number of drilling spindles: 21 Total vertical + horizontal spindles: 25 Number of milling spindles: 2 Total tool changer positions: 77 Barcode reader model: DATALOGIC Work table and workpiece clamping Number of rails: 12 Number of pumps: 1 Vacuum pump flow rate: 300 m³/h Positioning via NC Vacuum cups for workpiece clamping Positioning of vacuum cups via NC Drilling unit Drilling unit 1: Top Vertical drilling spindles: 21 Horizontal drilling spindles in X: 2 Horizontal drilling spindles in Y: 2 Nwsdpfx Afey Uviwjxsg Total vertical + horizontal spindles: 25 Milling units Milling spindle 1: Top Number of controlled axes (milling spindle 1): 5 Motor power (milling spindle 1): 15 kW Speed (milling spindle 1): 24,000 rpm Automatic tool change Milling spindle 2: Top Number of controlled axes (milling spindle 2): 4 Automatic tool change (milling spindle 2): Yes Motor power (milling spindle 2): 11 kW Speed (milling spindle 2): 12,000 rpm Edge banding unit Number of edge banding units: 1 Maximum panel height: 60 mm Model: POWER EDGE 360° Position: Mounted on the main carriage of the machine Number of edge tape magazine positions: 2 Glue unit Glue pot for hot-melt adhesive Pre-melter for hot-melt adhesive Tool magazines Number of tool magazines: 4 Positions in tool magazine 1: 72 Position of tool magazine 1: At the rear of the machine Positions in tool magazine 2: 2 Position of tool magazine 2: At the rear of the machine Positions in tool magazine 3: 2 Position of tool magazine 3: At the rear of the machine Positions in tool magazine 4: 1 Use of tool magazine 4: For saw unit D:350 mm only MACHINE DETAILS Control system: WINDOWS 10 Machine programming software: POWERCONTROL PC 85 EQUIPMENT Pod and rail worktable NC-positioned workpiece clamping Vacuum cups Vacuum pump Top drilling unit 2 milling spindles POWER EDGE 360° edge banding unit Glue pot for hot-melt adhesive Pre-melter for hot-melt adhesive Edge tape magazine 4 tool magazines DATALOGIC barcode reader Safety net Chip conveyor CE marking Safety mats The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photo documentation and technical/commercial records of descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and operation of the machine at the destination. External reference: 8527

Gamybos metai: 2006, būklė: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, briaunos storis (maks.): 12 mm, X ašies padavimo greitis: 40 m/min, plokštės aukštis: 60 mm, plokštės ilgis: 2 400 mm, plokštės plotis: 1 000 mm, mašinos/transporto priemonės numeris: 0-202-48-1184, No reserve price – guaranteed sale to the highest bidder! Collection of the machine must take place between 10.06.26 and 30.06.26! The machine package consists of four machines, detailed as follows: Pos. 1 – KUKA KR 180-2 PA Serial number: 940443 Function: Loading station Nwodpfx Ajy Ur Hlsfxjg Payload: 180 kg Number of controlled axes: 4 Arm reach: 3,200 mm Number of panel stack stations: 2 Control system: KR C2 Motion system with frame Suction cups Pos. 2 – HOMAG KFL10/24/PU/30 Serial number: 0-202-48-1184 Machine type: Edge banding machine Bonding system: PUR, laser Max. feed speed: 40 m/min Operating units: 12 Panel height min.: 8 mm Panel height max.: 60 mm Panel length max.: 2,400 mm Panel width min.: 85 mm Panel width max.: 1,000 mm Edge thickness min.: 0.3 mm Edge thickness max.: 12 mm Number of panel formatting/milling units: 3 Pre-milling unit Corner rounding unit Grooving unit Pressure system Panel support guides Positioning via NC Panel infeed alignment system Panel formatting/milling units Unit 1: Pre-milling unit Automatic timed engagement Positioning via NC unit Unit 2: Double trimming unit, top and bottom Model: KD 10 Motor power: 6.6 kW Speed: 6,000 rpm Positioning via NC Unit 3: Pre-milling unit Motor power: 4 kW Speed: 8,640 rpm Automatic timed engagement Positioning via NC Gluing and edging system Number of edge magazine positions: 24 Pre-melter model: ROBATECH PU-Premelter 18 Laser Lamps for preheating panel edge Edgebanding processing units Number of edgebanding processing units: 8 Unit 1: End trimming unit Number of motors: 2 Positioning via NC Unit 2: Rough trimming, top and bottom Number of motors: 2 Unit 3: Fine trimming for flush and radius milling Number of motors: 2 Positioning via NC Unit 4: Corner rounding Number of motors: 2 Automatic tool change Positioning via NC Unit 5: Milling/roughing unit Number of motors: 1 Unit 5 motor power: 12 kW Unit 5 speed: 10,000 rpm Automatic tool change Positioning via NC Unit 6: Edge scraper Positioning via NC Unit 7: Glue scraper Unit 8: Buffing unit Number of motors: 2 Control and equipment Control system: POWER CONTROL PC 21 Barcode reader model: DATALOGIC Pos. 3 – KUKA KR 180-2 PA Serial number: 940444 Function: Unloading station Payload: 180 kg Number of controlled axes: 4 Arm reach: 3,200 mm Number of panel stack stations: 2 Control system: KR C2 Motion system with frame Suction cup system Pos. 4 – LIGMATECH ZTR 100/30/26/S Serial number: 0-309-04-4129 Machine type: Return conveyor for edge banding machine Panel width max.: 1,000 mm Panel length max.: 2,400 mm Control system: POWERCONTROL PC 52 Panel eject Panel feed The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial descriptive documentation. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and operation of the machine at its final destination. External reference: 8522

Būklė: naudotas, mašinos/transporto priemonės numeris: 008527, Darbo sritis X ašis: 6000 mm Darbo sritis Y ašis: 1400 mm Darbo paviršius: su vakuuminėmis konsolėmis Pagrindinės ašies galia: 15 kW Valdomų ašių skaičius: 5 ašys Didžiausias briaunos aukštis: 65 mm Gręžimo velenų skaičius: 21 Nwedpfx Asy Nx Ufefxog Įrankių vietų skaičius: 77

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2007, mašinos/transporto priemonės numeris: 0-200-03-9040, Funkcionalumas: visiškai funkcionalus, Toote kirjeldus: Müüa hästi hooldatud, tööstuslik ühepoolne servapealistusmasin HOMAG OPTIMAT KAR 310/5/A20/S2. Tuntud oma töökindluse ja täpsuse poolest, sobib see masin suurepäraselt professionaalsetele puidutöötlemisettevõtetele, kes vajavad kvaliteetset servatöötlust erineva materjali ja paksuse jaoks. Tootja: HOMAG Mudel: OPTIMAT KAR 310/5/A20/S2 Seisukord: Väga heas töökorras, koheseks kasutuseks valmis. Tootmisaasta: 2007 Töötunnid: Hetkel pole võimalik vaadata, kuna toitekaabel ei ole ühendatud. Peamised tehnilised andmed ja omadused: Liimisüsteem: FE-MA-TECH Advanced PUR 2 kg, täielikult renoveeritud 10.11.2025, kaasas 2 uut liimipotti. Söötmiskiirus: 18 m/min Plaadi paksus: 10–60 mm Servamaterjali paksus: 0,3–20 mm Nedpfoxvqqpsx Afxewg Komplekti kuuluvad töötlemisagregaadid: - Eellihvimis-/ühendusagregaat: Täiuslikuks serva ettevalmistuseks - FE-MA-TECH Advanced PUR 2 kg - Survetsoon: Optimeeritud paksude servade jaoks - Otsaärastusagregaat (HL): Täpseks serva ülekäigu lõikuseks ees ja taga - Peene freesimise agregaat (MFL): Ülemise ja alumise serva töötlemiseks sirgeks või raadiuseks (S2 seadistusega) - Profiilikraapimisseade (PN): Freesimisjälgede eemaldamiseks sileda pinna saavutamiseks - Poleerimis-/lõppviimistlusagregaat (SM): Täiuslikuks kõrgläike viimistluseks Lisainfo: Hooldusajalugu: Igapäevane hooldus Projecta OY (Eesti) poolt; 2023 – tarkvara ja arvutisüsteemi täielik uuendus.

Būklė: naudotas, mašinos/transporto priemonės numeris: 005321, Uždėtos briaunos tipas: plona briauna, stora briauna Klijavimo sistema: EVA, lazerinė Sujungimo frezavimas: taip Maks. padavimo greitis: 35 m/min Maksimali plokštės storis: 40 mm Nsdsy Nkrcepfx Afxowg Darbo agregatai: 8 vnt.

Būklė: naudotas, mašinos/transporto priemonės numeris: 006042, Priklijuotos briaunos tipas: plona briauna, stora briauna Klijavimo sistema: EVA Sujungimo frezavimas: taip Daugiafunkcinis agregatas: taip Nedswacqlepfx Afxewg Viršutinis frezavimo agregatas: taip Maks. padavimo greitis: 25 m/min Maksimali plokštės storis: 40 mm Darbo agregatai: 9 vnt.

Būklė: naudotas, mašinos/transporto priemonės numeris: 005335, Priklijuojamos briaunos tipas: plona briauna, stora briauna Klijavimo sistema: EVA Sujungiamosios frezos: taip Daugiafunkcinis agregatas: taip Viršutinio frezavimo agregatas: taip Didžiausias plokštės storis: 60 mm Darbo agregatų skaičius: 13 vnt Njdpey I Trcofx Afxswg

Būklė: naudotas, mašinos/transporto priemonės numeris: 004592, Taikomo krašto tipas: plonas kraštas, storas kraštas, masyvi mediena Klijavimo sistema: EVA Priešfrezavimas: taip Daugiafunkcis agregatas: taip Maks. padavimo greitis: 24 m/min Maksimalus plokštės storis: 60 mm Nodowcmxljpfx Afxswg Darbo agregatai: 8 vnt.

Būklė: naudotas, Gamybos metai: 2007, bendras aukštis: 1 200 mm, bendras ilgis: 3 600 mm, bendras plotis: 1 480 mm, Color: Grey - Machine available from: 2025-12-15 - Year of manufacture: 2007 - Documentation available: Yes - └ Type of documentation: Technical data, electrical circuit diagrams, user manual, operating system - └ Language: NL - CE marking available: Yes - CE certificate available: No - Serial number: - Number of units [pcs]: 8 - └ 1st unit type: - - Tools included: Yes - └ 3rd unit type: - - Tools included: Yes - └ 4th unit type: - - Tools included: Yes - └ 5th unit type: - - Tools included: Yes - └ 6th unit type: - - Tools included: Yes Nsdpfjx Ei Sysx Afxewg - └ 7th unit type: - - Tools included: Yes - Voltage [V]: 400 - Power consumption [A]: 50 - Transport dimensions: 3600mm x 1480mm x 1200mm (L x W x H) - Transport packages [pcs.]: 4 Financial information VAT: The indicated price is exclusive of VAT VAT/margin scheme: VAT deductible for businesses Delivery and trade-in possible at any time for all items from the industrial sector Yorick Diebels

Būklė: naudotas, Gamybos metai: 2008, bendras aukštis: 1 800 mm, bendras ilgis: 10 000 mm, bendras plotis: 2 200 mm, Weight: 5,500 kg - Year of manufacture: 2008 - Documentation available: No - CE marking present: Yes - CE certificate available: No - Serial number: - Number of units [pcs.]: 8 - 1st unit type: Pre-milling unit - 2nd unit type: Glue application unit - 3rd unit type: Cross-cutting unit - 4th unit type: Rough trimming unit - 5th unit type: Rough trimming unit - 6th unit type: Radius scraping unit - 7th unit type: Flat scraping unit Nodsychw Ijpfx Afxjwg - 8th unit type: Brushing unit - Voltage [V]: 400 - Power consumption [A]: 43 - Fuse [A]: 50 - Transport dimensions: 10,000 mm x 2,200 mm x 1,800 mm (L x W x H) - Transport weight [kg]: 5,500 kg - Transport packages [pcs.]: 3 Financial information VAT: The indicated price is exclusive of VAT VAT/margin scheme: VAT deductible for businesses Delivery and trade-in possible at any time for all industrial equipment Yorick Diebels