Lenkimo presas

HESSE by LFSS AP 1020/100

Būklė: naujas, Būklė – nauja Pristatymo laikas – apie 12 savaičių nuo užsakymo Šalis – Turkija Kaina – 17 850 € Lizingo įmoka – 342,72 € Presavimo jėga – 100 tonų Cilindras – tvirtas arba reguliuojamas Lenkimo ilgis – 1020 mm Eiga – 300 mm Prjdpfx Aoynm Nmsi Hjb Atstumas tarp stulpų – 1020 mm Atstumas tarp stalo ir įrankių laikiklio – 680 mm Greitasis judėjimas – 9 mm/s Darbinis greitis – 5 mm/s Grįžtamasis judėjimas – 10 mm/s Maksimali lenkimo galia (konstrukciniam plienui) – 6 mm Stalas – 500 x 1020 mm Skylė stalui – 100 mm Atstumas tarp skylių – 190 mm Ilgis – 2110 mm Plotis – 1000 mm Aukštis – 2275 mm Svoris – 2082 kg 2 kreiptuvai Didelė stūmoklio plokštė ir didelis atraminis stalas su T formos grioveliais Viršutinis ir apatinis įrankiai lenkimui Manometras Greitasis judėjimas su automatiniu perėjimu į darbinį greitį Bet kokia stūmoklio padėtis 2 valdymo būdai – RANKOMIS IR PĖDOS PEDALU Stalo aukštis reguliuojamas Įranga atitinka CE normas Eksploatavimo instrukcija – VOKIEČIŲ ir ANGLŲ kalbomis

Būklė: geras (naudotas), Gamybos metai: 1998, Press force: 315.00 t Pedpfx Aev Rwu Uji Hjrb Stroke: 500 mm Throat depth: 425 mm Daylight (Stroke up): 1,000 mm Table surface: 1,200 x 815 mm Table height above floor: 800 mm Ram surface: 1,100 x 700 mm Downward speed: 48 mm/s Upward speed: 330 mm/s Working speed: 19 mm/s Oil capacity: 1,600 l Power requirement: 82.0 kW Weight: 23.00 t Overall dimensions (W x D x H): 2.4 x 2.8 x 4.0 m Permitted for manual loading according to CE regulations. Equipped with oil-hydraulic drive, pressure-, time- and stroke-dependent control, front light barrier (Sick), two-hand operation.

Būklė: naujas, Gamybos metai: 2024, TECHNICAL DATA Table size: 1100 x 760 mm Table height: 870 mm Spindle: Non-removable 30 mm Clamping height: 140 mm Height adjustment: 125 mm Extraction ports: 2 x Ø 120 mm Speeds: 3000 / 4500 / 6000 / 9000 rpm Colour: RAL 7035 Light Grey and RAL 5000 Violet Blue Net weight: approx. 800 kg TECHNICAL DESCRIPTION Solid German engineering Spindle moulder with single-sided tilting, fixed spindle for a swiveling range from -5° to +45.5° Electronic positioning control for height and tilt adjustment, with zero point reset for height and offset positioning Electronic displays for position and spindle speed 4 spindle speeds: 3000 / 4500 / 6000 / 9000 rpm Quick-release belt tensioning device Push buttons for spindle start and stop Forward and reverse rotation Quick clamping system for cutters Finely planed grey cast iron table with fixed frame support Control panel mounted below the fixed frame support Fence 216, total adjustment via handwheel and LCD display, including cast iron fence plates and aluminium chip guards Predpfx Aefpb Nmei Hsb Machine socket Lockable main switch Mechanical motor brake Milling guard and pressure device GAMMA V 1629 Curved milling fence 1639 Tapoa Spindle diameter 30 mm, non-removable CE compliant GS tested

Būklė: geras (naudotas), Code: 0348 Marke: VITAP - ITALIEN Modell: POINT K2 TOP - CE-Standard CNC-Bearbeitungszentrum für präzises und flexibles Bohren und Fräsen von Platten, Möbeln, Maßanfertigungen, Küchen, Badmöbeln und diversen Anwendungen – CE-Standard – Baujahr 2017 Technische Merkmale: Kompakte Bauweise Patentiertes D.D.T. (Double Dynamic Transport)-System mit kontinuierlicher Plattenbewegung ohne Umpositionierung des Werkstücks, dank zwei Spannzangen. Technische Daten: Plattenmaße: Min./Max. Länge: 270/3000 mm Min./Max. Breite: 180/1100 mm Max. Höhe: 50 mm Horizontaler Plattenvorschub auf X-Achse: 25 m/min Vertikaler Vorschub auf Z-Achse: 15 m/min Horizontaler Vorschub auf Y-Achse: 30 m/min Bohrkopf: Motor: 2 PS 12 vertikale Spindeln, Seite 1 (Z-Achse) 2 horizontale Spindeln, Seite 4 (Y-Achse) 2 horizontale Spindeln, Seite 6 (Y-Achse) 2 horizontale Spindeln, Seite 3 (X-Achse) 2 horizontale Spindeln, Seite 5 (X-Achse) Spindelabstand (Mittel zu Mittel): 32 mm Max. Durchmesser Horizontalfräser: 15 mm Max. horizontale Bohrtiefe: 30 mm Max. vertikale Bohrtiefe: 55 mm Fräseinheit: Motorleistung 5 PS – 24.000 U/min Sägeeinheit: Durchmesser 100 x 4 mm – 7.000 U/min TPA-Software Horizontale Fräseinheit Einlaufrollenbahn: 800 x 600 mm Auslaufrollenbahn: 800 x 600 mm Prjdpfx Aoyzrxzoi Hob Absaugstutzendurchmesser: 1 x 50 mm / 2 x 100 mm Druckluft: 7 bar Abmessungen (LxBxH): 2530 x 1700 x 1900 mm Gewicht: 833 kg

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2026, Spindle tiltable: Yes, 0 to 45° Height adjustment: Handwheel / electric Tilting adjustment: Handwheel / electric Fence adjustment: manual Height display: Digital display Tilt angle display: Digital display Fence position display: mechanical counter Spindle diameter: 30 mm Speeds: 3000, 4500, 6000, 7000, 10000 rpm Motor power: 7 kW Podpfxsuzkxxj Ai Herb Motor brake: Yes, automatic Extraction port: 2 x 120 mm Machine length: 2599 mm Machine depth: 900 mm Weight: 655 kg

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, minimax ti 55es LL – Spindle Moulder Image shows T 55 i elite s standard version Professional workshop machine with tilting spindle and 4 speeds. M Digital: motorized height adjustment and tilting. Robust steel and cast iron construction. Large-dimension grey cast iron milling unit, tiltable up to -45° to the rear. Prjdpedqzh Rofx Ai Hsb Spindle speeds displayed via LEDs. Quick and easy speed change via eccentric clamping. Reversible direction of rotation (right/left). Height and tilt display accurate to 1/10 mm. Heavy-duty industrial fence: with rack-and-pinion fine adjustment, digital display, aluminium fence jaws, 3-position repeat setting for quick adjustment. Scope of delivery: Aluminium fence jaws Curved milling protection hood Table extensions left and right Model: minimax ti 55es LL Article No.: 5502252 Technical data: Worktable dimensions: 2500 x 655 mm Sliding table dimensions: — Usable spindle length: 125 mm Max. tool diameter: 240 mm Max. retractable tool diameter: 230 mm Max. tenoning cutter diameter: 320 mm Spindle tilting range: 0 to -45 degrees Speeds: 3500/6000/8000/10000 rpm Motor power 400V / 50 Hz / S6-40%: 5.0 kW Extraction port diameter: 2 x 120 mm

Būklė: naudotas, Gamybos metai: 2018, 1 unit CNC-controlled drilling, gluing and dowel inserting machine GANNOMAT "INDEX 130 PRO" (with options as Index 180 Pro) 400V, 3Ph, 50Hz, complete in standard configuration with: - Linear guide support consisting of: 1 pc. single-spindle horizontal drilling unit, 1.1 kW motor, tool speed selectable via operator software (3,000/5,000/8,000 rpm) 1 pc. reinforced blow-out, gluing and dowel inserting station for 8 mm diameter dowels, dowel length 30 mm - Fully automatic, electronically controlled centralized lubrication - X-axis NC controlled, with working length 1,300 mm, max. travel speed 78 m/min - Z-axis, position programmable over support table 5-40 mm, with option for NC-controlled Z-axis - Dowel insertion projection 7-20 mm, programmable with option of NC-controlled Y-axis Drilling depth from 0-35 mm (with drill length total 70 mm) is automatically set with dowel protrusion - Enclosed glue system with 6 bar glue pressure via glue nozzle, for glues with viscosity from 150 to 350 mPas - Glue quantity steplessly adjustable via operator software - Selector switch GLUE/WATER for rinsing the glue system, 1 stainless steel container each for 5 kg glue and 5 liters of water - Indicator lamp for glue level in glue container - 1 pc. side fence left, 1 pc. side fence right, and 1 pc. center fence (all removable) - 4 pcs. start buttons for individual operation with 1-4 workpieces - 4 pcs. pneumatic angled clamping cylinders 10°, for workpiece thicknesses up to max. 80 mm, workpiece length (Y) min. 70 mm Prjdjxwaz Hspfx Ai Hsb - 1 pc. extraction funnel, connection diameter 80 mm - 1 pc. TCT control with: integrated industrial PC, incl. Beckhoff TWINCAT Soft PLC, operating temperature range 0-50°C, 15" resistive TFT industrial touchscreen display, 1024 x 768 resolution, 2 GHz CPU, 256 MB RAM, 2x network interfaces, IDE hard drive, 4x USB rear, 1x USB front, operating system: WINDOWS 7 - Programming via menu-guided user software, freely programmable drilling distances with absolute, relative, or grid dimensioning, automatic workpiece mirroring and process optimization, 4 work zones assignable with different programs, graphical workpiece display, parametric programming, zero-point shifting, programmable job lists, plain text error diagnosis OPTIONS: - 1 electronic optical glue monitoring system G.I.C. (Glue Insert Control) for 1 glue nozzle - 4 additional vertical angled clamping cylinders 10° with bracket (total 8 clamping cylinders) - Surcharge for machine bed length 1,800 mm with working length 1,800 mm - Surcharge for: 1 horizontal drilling unit, 1.5 kW motor, with multi-spindle drilling head with 3 individually selectable drilling spindles, 32 mm centers in X-axis arrangement, tool speed 3,000 rpm (Standard working length not reduced) - 1 NC-controlled Y-axis, with ballscrew and dynamic travel speed 300 mm/sec. Via software, programmable dowel insertion projection 7-30 mm and drilling depth 0-42 mm (with drill length total 77 mm) for vertical drilling unit from above, Y-axis position 5-42 mm - Surcharge for NC-controlled Y-axis position 5-62 mm instead of 5-42 mm - Surcharge for: 1 vertical drilling unit from above, 1.5 kW motor, with multi-spindle drilling head with 3 individually selectable drilling spindles, 32 mm centers in X-axis arrangement, tool speed 3,000 rpm, Y-axis position 5-42 mm, workpiece length (Y) min. 130 mm (standard working length not reduced) - 1 NC-controlled Z-axis, with K

Būklė: naujas, Gamybos metai: 2025, stalo ilgis: 900 mm, stalo plotis: 450 mm, ašies skaičius: 1, veleno greitis (min.): 8 000 aps./min, stalo apkrova: 500 kg, Vertikalbearbeitungszentrum VMC 650, CNC-gesteuerte Fräsmaschine Das VMC 650 Bearbeitungszentrum ist eine multifunktionale Anlage, mit der Sie Fräs-, Bohr-, Gewindeschneid- und bei entsprechender Ausstattung auch Drehbearbeitungen im Automatikbetrieb durchführen können. Die CNC-Fräsmaschine VMC 650 ist wahlweise mit einem Werkzeugmagazin mit 16 oder 24 Stationen ausgestattet. Je nach Kundenwunsch kann die Fräsmaschine mit einem CNC-System von GSK, Siemens oder Fanuc geliefert werden. Optional ist der Antrieb einer Y-Achse nachrüstbar. Als sehr sinnvolles Zusatzpaket empfehlen wir den Einbau eines Späneförderers, der Ihnen im Betrieb wertvolle Zeit spart. Technische Daten: Arbeitstischgröße: 900 x 450 mm Maximales Werkstückgewicht: 500 kg Verfahrwege X/Y/Z: 800/450/500 mm Maximaler Abstand Spindel – Tischoberfläche: 120 – 620 mm Motorleistung: 5,5 – 7,5 kW Maximale Spindeldrehzahl: 8.000 U/min Pedpfxjxc I Dgj Ai Hsrb Spindelaufnahme: BT40 Positioniergenauigkeit: ±0,008/300 mm Wiederholgenauigkeit: ±0,005 mm Maschinenabmessungen: 3.000 x 2.275 x 2.550 mm Maschinengewicht: 4.000 kg Wir liefern auch CNC-Fräsmaschinen und Bearbeitungszentren mit anderen Tischgrößen: VMC 850 – Tischgröße: 1.000 x 500 mm VMC 855 – Tischgröße: 1.000 x 550 mm VMC 1060 – Tischgröße: 1.200 x 600 mm VMC 1160 – Tischgröße: 1.200 x 600 mm VMC 1275 – Tischgröße: 1.300 x 700 mm VMC 1370 – Tischgröße: 1.400 x 700 mm VMC 1580 – Tischgröße: 1.600 x 800 mm VMC 1680 – Tischgröße: 1.700 x 800 mm VMC 1890 – Tischgröße: 2.000 x 900 mm

Būklė: geras (naudotas), Gamybos metai: 1988, Pressure: 15 t Throat depth: 180 mm Stroke: 6 - 60 mm Strokes per minute: 145 spm Ram adjustment: 40 mm Table surface: 400 x 270 mm Table opening: 100 mm Predst Tqglspfx Ai Hjb Ram surface: 120 x 100 mm Installation height: 250 mm Total power requirement: 1.1 kW Machine weight approx. 1,150 kg Space requirement approx. 0.96 x 1.34 x 1.88 m - Positive-locking Ortlinghaus clutch - Not suitable for manual loading operations - The press has been tested in our facility and is delivered with a current UVV (accident prevention regulation) inspection certificate

Būklė: geras (naudotas), Gamybos metai: 1998, Funkcionalumas: visiškai funkcionalus, hidraulinio cilindro reguliavimas: 40 mm, įrengimo aukštis: 2 400 mm, bendras plotis: 17 000 mm, stalo ilgis: 400 mm, stalo plotis: 400 mm, spaudimo jėga: 25 t, eigos reguliavimas: 17 mm, darbinis plotis: 200 mm, bendras svoris: 2 500 kg, paskutinio kapitalinio remonto metai: 2023, galia: 0,003 kW (0,00 AG), Manufacturer: MABU Model: 25 VPR. Made in Germany. Completely overhauled in Dec. 2023. Max. Pressure: 250 kN (25 t). Speed range: 100–500 spm. Year of manufacture: 1998. Operating modes: Manual, single stroke, and automatic. Equipped with two-hand start and foot pedal start. Fixed stroke: 17 mm. Ram adjustment: 40 mm. Max. tool dimensions: 400 x 400 mm. Power: 3 kW. Voltage: 230 / 400 V. Air supply: 5.5 bar. Feed unit: Silicon SFS 200 on the left side. Psdpfx Aisq Ikhpj Herb Max. strip width: 200 mm. Machine dimensions: H 2350 x W 1700 x D 1400 mm. Machine weight: approx. 2500 kg. Control cabinet with Mabu Pf 1.3 control system. Front and rear safety guards with viewing windows. Technical documentation and operating manual included in English and German. CE certificate and EUR-1 certificate of origin. In stock, tested and ready for dispatch. Additional used machines from Mabu, Bruderer, Bihler, and Schaal are available for sale in our warehouse.