Klimato bandymų kamera

Heraeus Vötsch VC³ 0100

Sąlyga: naudotas, Gamybos metai: 2004, Used APV Anhydro model PSD 52 stainless steel (AISI 316) spray dryer. Maximum evaporation/drying capacity of 9.3 kg/h at a maximum air temperature of 350 °C. The drying chamber has a diameter of approx. 1000 mm x 700 mm straight side height x 1100 mm cone bottom height. Includes (1) CMT model AF07 rotary atomizer driven by an IBAG motor with 0.7 kW power, impeller diameter 63 mm, speed range 10,000 - 60,000 rpm. The equipment also features a 12 kW electric air heater, cyclone with collection vessel for dry product, fan, and main control cabinet with integrated control panel. Ffjdpfjuk Ehxex Ab Sjt

Sąlyga: naujas, Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 2024/121/47, pjūklo disko skersmuo: 420 mm, GRAULE Crosscut and Mitre Circular Saw Model ZS 170 N (tiltable) 400 Volt three-phase brake motor, 2.2 kW Fodpfjtwz Tlsx Ab Ssft Saw blade diameter: 420 mm Blade bore: 40 mm Cutting height: 170 mm Blade tilted to 45°: cutting height 115 mm, cutting length 410 mm Including the following accessories: 1 pc. machine, tiltable on both sides via hand crank from the rear, from 90° to 45° left and approx. 30° to about 60° right 1 pc. HM circular saw blade 420x3.4/2.4x30 mm, 48 teeth, negative rake, for wood 1 pc. machine stand

Sąlyga: naudotas, Regoplas RT50 Termoöl-Temperiergerät | Thermoöl bis 300°C Fjdpfx Aedmn E Heb Ssft

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Funkcionalumas: visiškai funkcionalus, Year of manufacture: 1997, connected load: 380V 5.2A 2.0kW, saw blade diameter: 350 mm, swivels 45° to both sides, height adjustable via hand crank, cutting length: 600 mm, extraction port: 100 mm, table height: 890 mm, right-hand roller conveyor with stop, cutting length: 3200 mm, left-hand roller conveyor with stop, cutting length: 2200 mm. Ffjdowhn T Uopfx Ab Sot

Sąlyga: labai geros būklės (naudotas), Heraeus Vötsch Climate Test Chamber We offer here a Heraeus Vötsch climate test chamber. Heraeus Vötsch climate test chamber with humidity control (water-cooled) Test chamber internal dimensions: width 800 mm x depth 800 mm x height 950 mm Housing dimensions: width 1090 mm x depth 1960 mm x height 1995 mm Specifications for temperature testing: Temperature range: -45°C to +180°C time stability: ±0.1 to ±0.5 K Fodpfjmt Du Tjx Ab Soft spatial uniformity: ±0.5 to ±1.5 K Temperature change rate according to IEC 60068-3-5 Heating: 4.0 K/min Cooling: 3.0 K/min Specifications for climate testing: Temperature range: -45°C to +180°C Temperature deviation at steady state, according to IEC 60068-3-5 depending on the test chamber temperature Temperature range: -10°C to +95°C time stability: ±0.1 to ±0.3 K spatial uniformity: ±0.5 to ±1.0 K Humidity range: 10% to 98% RH Humidity deviation over time: +1 to ±3 Electrical connection: Rated voltage: 3/N/PE AC 400V±10% 50Hz Rated power: 7.8 kW Rated current: 15.0 A Refrigerant: R452A Test chamber capacity: approx. 600 liters Weight: approx. 620 kg net Type: VC³ 4060 For your security as a buyer, the following information! The following points are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a trial run monitored with calibrated equipment. Condition: used Scope of delivery: (See picture) (Subject to changes and errors in the technical data and specifications!) Feel free to contact us by phone for any further questions.

Sąlyga: naujas, *Technical Standard Specification: Heating capacity: 9 kW Cooling capacity: 50 kW Medium: Water up to 160°C Maximum external volume: 16 l at 160°C Max. flow rate: 57 l/min Max. delivery pressure: 6.0 bar Dimensions (L x W x H): 780 x 305 x 705 mm Weight: approx. 80 kg Ffedjftm Hrspfx Ab Sst HIGHLIGHTED FEATURES: • Smart Controller Plus 7" touchscreen / Industry 4.0 compatible • Flow measurement, adjustable flow alarms • Return temperature display • Frequency inverter for pump speed control with automatic mode for energy-optimized operation, or adjustable flow rate (within the operating range of the temperature control system) • Electronic pressure sensor in the supply line • Interface via 9-pin D-sub connector 20mA/TTY • Connection for external temperature sensor PT 100 for measuring and displaying tool temperature • Continuous bypass of the heat exchanger with a 3-way valve to reduce deposits in the heat exchangers • High-performance pump, hydraulic parts in stainless steel (VA), magnetically coupled • Tool emptying via suction • Booster pump for unit filling at high temperatures • Filling via cooling water switchable to separate filling • SSR for heating control • IP54 splash water protection Visit our website for more details or for other performance classes. *This unit is compliant with European directives. Other directives and standards are only met if listed in the order confirmation. This technical specification reflects the standard equipment. Customer requirements deviating from the standard will be specified in quotations or order confirmations.

Sąlyga: labai geros būklės (naudotas), Weiss Type: WKL 34/60 Weiss climatic chamber, air-cooled Refrigerant converted to R-452A -60°C to 150°C Chamber volume: 34 liters Feed-throughs in standard configuration installed: R1 NW 50 mm L1 NW 120 mm Internal dimensions: Height 310 mm x Width 324 mm x Depth 300 mm Fodpfxetr Dins Ab Seft External dimensions: Height 1740 mm x Width 630 mm x Depth 970 mm Specifications for temperature tests: Temperature range: -60 to +150 °C Temperature deviations under steady-state conditions (according to IEC 60068-3-5): Temporal fluctuation at center of workspace: ± 0.3 to ± 1 K / ± 1 to ± 2 K Spatial deviation (temperature gradient): 2 to 4 Temperature change rate (per IEC 60068-3-5): Heating: 2.5 K/min Cooling: 3 K/min Maximum heat compensation: 550 W Specifications for climatic tests: Temperature range: +10 to +95 °C Humidity range: 10 to 98 % r.h. Temperature and humidity deviations (steady-state, per IEC 60068-3-5): Temporal temperature fluctuation at center of workspace: ± 0.3 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1.5 (temperature gradient): 1 to 3 Temporal humidity fluctuation at center of workspace: ± 3 to ± 5 % r.H. Operational data: Test chamber illumination: Halogen bulb 12V, 20W Rated voltage: 1/N / PE AC 230 V ± 10% 50 Hz Rated power: 2.5 kW Rated current: 11 A Protection (on-site): 16A slow-blow Heat emission (air-cooled chamber): Maximum heat emission to ambient: 1700 W Refrigerant: R-452A / R23 Weight: 140 kg Important safety information for the buyer! The following points will be completed on our offered chambers prior to delivery: 1. Functional check and replacement of necessary components 2. If required, new filling with legally compliant refrigerant 3. Leak test with certificate 4. Upon successful completion, the chamber undergoes a documented test run. Condition: used Scope of delivery: (see picture) (Technical data subject to change and error!) We are happy to answer further questions by phone.

Sąlyga: naudotas, No. 04480 Cross Cut and Mitre Circular Saw Graule ZS 135 N Used This machine type is designed for cross-cutting as well as horizontal and vertical mitre cuts; double mitre cuts are also possible. Precise ball bushing guidance of the tool carriage on hardened and ground steel shafts. Fast mitre adjustment up to 25° horizontally and up to 45° vertically. Adjustable fixed stops at 90° and 45°. Machine can be set for mitre cuts in 2 planes. Adjustable aluminium fence plates. Robust cast iron construction. Lower saw blade guard can be connected to extraction system. 3 kW three-phase brake motor, 400 Volt (optional equipment). Saw blade diameter 350 mm, blade bore 30/40 mm, cutting height 135 mm, cutting length 430 mm, saw blade inclined at 45°: cutting height 92 mm. Including aluminium saw blade, 350 mm diameter. Including machine stand for type ZS 135 N. Including roller conveyor RLK 3000 x 350 mm with length stop featuring measuring scale and rear-folding material stop, roller diameter approx. 40 mm. Transport dimensions machine approx. 1300x700x1700 mm (LxWxH), roller conveyor approx. 3000x500x800 mm (LxWxH). Weight approx. 300 kg. To avoid possible misunderstandings, on-site inspection by appointment is possible and recommended. Sale as is. Technical data, condition description, year of manufacture and scope of delivery as per manufacturer’s brochure or previous owner; no guarantee. Ffedpew Htm Rofx Ab Sot Subject to prior sale. For used machines, all warranties are excluded; the following applies: “purchased as viewed”. Payment terms: Prices plus applicable VAT, payment before collection or dispatch. Delivery terms: ex stock.

Sąlyga: labai geros būklės (naudotas), Brookhuis moisture meter for crosswise pass-through operation, equipped with 3 sensors. Ffodpfx Abjhlcu Ne Set

Sąlyga: geras (naudotas), Code : 0323 Marca : SML - ITALIA Modello : SILVER P 35/EL - Conforme CE Ffedpfx Astu Hy Ejb Set Troncatrice elettronica doppia a misura per il taglio di legno, cornici, PVC, alluminio, materie plastiche e vari materiali - Conforme normativa CE Dati tecnici: - Discesa teste oleo-pneumatica - Lunghezza di taglio max mm 5200 - Lunghezza di taglio min mm 50 - Altezza di taglio mm 100 - Larghezza di taglio max mm 170 - Diametro lama mm 350 F30 - Motore Hp 3 ciascuno - Giri/min 3000 - Programmatore elettronico del posizionamento teste - Comando bimanuale per discesa lama - Pressioni pneumatiche per bloccaggio pezzo - N° 2 bocche aspirazione diametro mm 60 - Pressione di esercizio 7 bar - Dimensioni totali mm 6300 x 1000 x 1600 h - Peso kg 1100