Juostinis šlifuoklis

HEESEMANN LSM 8

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2000, Funkcionalumas: visiškai funkcionalus, darbinis plotis: 1 350 mm, bendras svoris: 10 000 kg, įėjimo srovė: 153 A, Heesemann LSM8 Surface Sanding Machine QLkLBw Sanding Width: 1350 mm CROSS/LONGITUDINAL/LONGITUDINAL Machine Base: Conveyor unit with a single transport belt; feed speed adjustable between 3 - 15 m/min via frequency control, including transport belt cleaning device. Constant working height of 920 mm; adjustment to various workpiece thicknesses (3 - 80 mm) by motor-driven adjustment of the upper machine section. Toothed belt cover for the lifting gear provides dust protection. Lifting gear toothed belt is monitored and controlled, integrated into the switch cabinet. 1. Cross Sanding Unit - Belt dimensions: 5,400 x 150 mm - Drive power: 13/17 kW - Sanding belt equipped with additional blasting tube for the belt cleaning device, wear-resistant brake unit, pressure segment belt system, intermittent belt cleaning blast device, belt running control. Includes door with glass insert. 2. Longitudinal Sanding Unit - Belt dimensions: 2,620 x 1,350 mm - Drive power: 13/17 kW - Belt, in combination with double the number of blasting holes in the belt cleaning device, wear-resistant brake unit. Automatic compensation for differences in belt length, sanding belt runs against feed direction, intermittent dust blasting device, infra-red belt monitoring. Eccentric bearing for the front (steel) roller for light calibration; controlled via operator terminal. 3. Longitudinal Sanding Unit - Belt dimensions: 2,620 x 1,350 mm - Belt speeds: 0.5 - 18 m/s - Drive power: 17 kW (frequency controlled) - Infinitely variable sanding belt speed, with twice the number of blasting holes in the belt cleaning device, wear-resistant brake unit, automatic compensation for belt length differences, sanding belt runs against feed direction, intermittent belt cleaning blast, infra-red belt monitoring. 4. Brush Roll Unit - Centrally height-adjustable; includes extraction hood and press-on roll. - Diameter: 150 mm - Drive power: 1.5 kW - Bristle type: fibre 5. Workpiece Suction Device - For secure transport of workpieces shorter than 500 mm in the feed direction, including integrated ventilator Voltage: 400 V, 50 Hz Belt Change: Left Control Terminal: Left 6. Ionization Bar (Top) - For removal of static charge, incl. high-voltage transformer 7. Workpiece Blasting Device with Rotating Compressed Air Nozzles (within the machine frame) The machine is ready for operation at your facility following a complete mechanical and electrical overhaul by authorized Heesemann service personnel. A new conveyor belt is fitted. Start-up and operator training at the customer’s location can be arranged. Transport costs are negotiable – loading is included in the price. Lsdpfxjxp Hvne Acujah If you have any questions, I am available. Paweł Szczepański +48 795 517 258

Sąlyga: geras (naudotas), darbinis plotis: 1 350 mm, HESEEMANN LSM8 Lajdpexcg Scefx Acujh

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 006530, Maks. apdorojimo plotis: 1300 mm Min. apdorojimo storis: 3 mm Darbo stalas: fiksuotas aukštis Vakuuminis transporteris: taip Darbo agregatų skaičius: 8 vnt. Laedpfewcybmox Acuoh

Gamybos metai: 2004, Sąlyga: paruoštas naudoti (naudotas), A 5-roller wood sanding machine by Heesemann is available. Sanding belt dimensions: 2620 x 1350 mm, sanding width: 1300 mm, working height: 1000 mm, roller diameter: 250 mm, belt speed: 24 m/s, extraction volume: 89.5 m³/min, extraction connection diameter: 250 mm + 180 mm, air velocity: 20 m/s. Dimensions (L/W/H): approx. 5200 mm / 2300 mm / 2300 mm, weight: approx. 13,000 kg. Documentation available. Inspection on site is possible. Lasdpfx Acjt Amc Ueujh

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 1994, Operating voltage: 380V Lajdpfx Aot Dk Siscuoh Frequency: 50Hz Weight: 7500 kg Current consumption: 172 A Year of manufacture: 1994 Calibration: Standard: 1350 x 2620 mm Cross sanding: Standard: 5400 x 150 mm Longitudinal sanding: Standard: 1350 x 2620 mm Machine dimensions Working width: 1300 mm

Sąlyga: naudotas, Gamybos metai: 2004, • Cutting width (mm): 1300 • Maximum workpiece thickness (mm): 3 - 140 • Deburring device: brush roller diameter 150 mm • Drive for deburring device (kW): 1.5 • Conveyor table: 3.0 kW frequency-controlled / 4.0 kW • Feed speed (m/min): 5 - 25 Lasdpfx Acjtt Slceujh • Workpiece transport belt vacuum clamping system (kW): 7.5 • Total weight (kg): approx. 7500 • Total connected load (kW): approx. 73

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1997, bendras ilgis: 4 400 mm, darbinis plotis: 1 400 mm, aukščio reguliavimo tipas: elektrinis, įėjimo dažnis: 50 Hz, įėjimo įtampa: 400 V, Hello, we offer for sale a Heesemann LSM 8 wide belt sander in a configuration with four sanding units: Lasdpfou Hlzfsx Acueh cross-belt unit / longitudinal unit with calibration drum / longitudinal unit with reverse / longitudinal unit with de-dusting brush The machine has undergone mechanical refurbishment and inspection, checked and set up, ready for operation. Year of manufacture: 1997 Feed speed: 5-25 m/min – infinitely adjustable from the control panel Working height: 880 mm Workpiece thickness: 3-80 mm Power requirement: 107 kW – at full load Total weight: 10,250 kg Control: control panel with physical buttons and display Control and abrasive belt change side: right Single, perforated feed belts, perforated table with channel and vacuum fan – for safe transport of short workpieces. Element hold-down: rubber-coated rollers, diameter 70 mm. Abrasive belt Q unit: 5,400 mm x 150 mm Motor power: 13/17 kW – two-speed motor – belt speed 12 m/s / 24 m/s "Sergeant" belt: 4,850 mm x 141 mm Longitudinal belt L unit: 2,620 mm x 1,450 mm Motor power: 16.5 kW / 21 kW – two-speed motors – 10 m/s / 20 m/s Pressure: Hold-down beams with computer-controlled selective pressure adjustment – CSD® system for seamless, multi-row feeding with smooth adjustment of individual pressure elements. Controller roller reading distance: 16 mm. Abrasive belts feature a cleaning system – air blast and dust extraction. Workpiece thickness tolerance compensation up to 2 mm via maintenance-free electromagnetic hold-downs. Working width as well as the start and end position of the sanding pressure beam are electronically controlled. Abrasive belt cleaning via blowing tubes; dust extraction via integrated extraction channels; air blast activation is automatic upon workpiece detection in the machine. At the end: cleaning/de-dusting brush, 150 mm diameter, with extraction channel for dust removal. Additional blow rotors at the machine outfeed with an extraction channel. Commissioning at your location and basic operational training – to be arranged. Price negotiable on request, machine available immediately.

Sąlyga: naudotas, Gamybos metai: 2012, veikimo valandos: 60 000 h, Funkcionalumas: visiškai funkcionalus, X ašies padavimo greitis: 12 m/min, ruošinio svoris (maks.): 50 kg, darbinis plotis: 1 350 mm, bendras ilgis: 62 000 mm, bendras aukštis: 2 800 mm, bendras plotis: 3 200 mm, įvesties srovės tipas: Oro kondicionierius, darbinio aukščio: 120 mm, įėjimo įtampa: 400 V, siurbimo galia: 36 000 m³/val, įėjimo srovė: 800 A, įėjimo dažnis: 50 Hz, galia: 440 kW (598,23 AG), suslėgto oro jungtis: 6 juosta, Kompletna lakiernia: 1x Szlifierka Heesemann (LSM 8, 2006.10.251, rok 2006, 2 wałki / 2 poduszki) 2x Szczotkarka Safo (2006, DCSF 135 2W) 1x Kabina natryskowa lakiernicza Cefla (2012, Roctre D/HS) Laodpfx Aov T Ttxjcujh 3x Tunel suszący gorącym powietrzem Cefla (2012, Aquadry LA) 1x Tunel suszący zimnym powietrzem Cefla (2012, Aquadry RLA) 1x Suszarka UV (3 lampy, UV-R SPM3/2500s) 2x Podnośniki hydrauliczne (zakres wysokości: 200–900 mm)

Sąlyga: naudotas, Gamybos metai: 2006, veikimo valandos: 100 000 h, Funkcionalumas: visiškai funkcionalus, X ašies padavimo greitis: 30 m/min, ruošinio svoris (maks.): 50 kg, darbinis plotis: 1 400 mm, siurbimo galia: 48 000 m³/val, įvesties srovės tipas: trifazis, bendras aukštis: 2 800 mm, bendras ilgis: 68 000 mm, bendras plotis: 2 600 mm, darbinio aukščio: 75 mm, galia: 720 kW (978,93 AG), įėjimo dažnis: 50 Hz, įėjimo srovė: 1 800 A, darbinis slėgis: 6 juosta, ruošinio plotis (maks.): 1 250 mm, suslėgto oro jungtis: 6 juosta, Komplette Lackieranlage: - 2x Heesemann Schleifmaschinen (LSM8 2006.12.141, 3 Walzen/3 Pads; LSM8 2006.12.151, 2 Pads) - 2x Heesemann Reinigungsmaschinen (EA8 2006.12.142 / EA8 2006.12.152) - 1x Cefla Heißluft-Trocknungstunnel (FEV EU2/8 6 IRM / TNSL) - 4x UV-Trockner (2 Lampen, UV 2000 M2+CRU+TN 4000/HT; 4 Lampen, UV 2000 M2+CRU+TN 5000/HT; 2 Lampen; 4 Lampen) - 2x Beizwalzenauftragsmaschinen (Smartcoater M-EVO / Modell M) - 2x Spachtelwalzenauftragsmaschinen (Smartcoater SP / SP1-EVO) Lsdpfxjv Ta Tfo Acujah - 3x Lackwalzenauftragsmaschinen (Smartcoater MF) - 10x Gurt-/Rollenförderer - 2x hydraulische Hubtische (200–900 mm Hubhöhe)