ELEKTROSTATINĖ MILTELIO DAŽYMO KROSTELĖ

HAS KİM İNŞAAT VE MAKİNE KİMYEVİ MADDE POWDER COATING OVEN

Sąlyga: naujas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2025, Dėžės tipo elektrostatinė miltelinio dažymo krosnis: Ilgis: 500 cm, Plotis: 250 cm, Aukštis: 300 cm Hodov Nvndepfx Agiei - Miltelinio dažymo kabina su filtru: Ilgis: 300 cm, Plotis: 220 cm, Aukštis: 270 cm - Elektrostatinio miltelinio dažymo įranga: Modelis: HMK MULTICOLOR, Naudojimo tipas: Rankinis

Sąlyga: visiškai atnaujintas (naudotas), SCHLATTER MG24 Welded Mesh Production Line Completely Refurbished WORKING RANGE Panel width: max. 2,500 mm Weft wire length: min. 900 mm Weft wire length with QF5 distributor: min. 300 – 1,600 mm Maximum spacing between outer warp wires: 2,400 mm Mesh length (warp wire length): max. 2,500 – 6,000 mm Minimum spacing between warp wires: 100 mm Spacing between weft wires: 25 – 250 mm Adjustable by cutting device (0-1) Warp wire diameter: 4.0 – 12.0 mm Weft wire diameter: 4.0 – 12.0 mm Number of warp wires: max. 24 MG 24.1/8C MESH WELDING MACHINE, Standard Equipment Includes: - 1 Machine base frame - 1 Upper support for press reception, continuously adjustable via handwheel - 1 Magnet holders with holding magnets and monitoring of weft wires - 1 Row of pneumatic solenoid valves for press actuation - 1 Air and water system - 2 Pneumatic rotary drives with oil damping - Static torque with 5 bar compressed air: 480 Nm - Continuously adjustable front from 25 – 250 mm, adjustable by cutting device (0-1) - 1 Advance carriage with panel lifting device - 1 Set of tools for machine adjustment Hedjwu Tu Djpfx Agisi WELDING SECTION Includes: - 8 C-type transformers - Rated power per transformer: 100 kVA - Secondary open-circuit voltage: 7.1 V - Secondary rated current: 14 kA - 8 ES 130 thyristor contactors - 12 Welding presses: 5.0 kN - 12 Warp wire current bridges for 50–100 mm warp wire spacing - 12 Warp wire current bridges for 100 mm stepped warp wire spacing - 10 Warp wire current bridges for 100–150 mm warp wire spacing - 8 Warp wire current bridges for 150 mm stepped warp wire spacing - 6 Warp wire current bridges for 150–200 mm warp wire spacing - 6 Warp wire current bridges for 200 mm stepped warp wire spacing - 24 Lower copper electrode holders with standard angular electrodes, each with a water-cooled current cable, width: 58 mm - 24 Wire holding clamps Panel width: max. 2,500 mm Weft wire length: min. 900 mm Weft wire length with QF5 dispenser: min. 300 – 1,600 mm Spacing between extreme warp wires: max. 2,400 mm Mesh length (warp wire length): max. 2,500 – 6,000 mm Spacing between warp wires: min. 100 mm Weft wire spacing: 25–250 mm Warp wire diameter: 4.0 – 12.0 mm Weft wire diameter: 4.0 – 12.0 mm Number of warp wires: max. 24

Sąlyga: naujas, Gamybos metai: 2025, Powder Coating Oven Working Dimensions (mm): 1200 (W) x 1500 (D) x 1800 (H) Hedpfx Aohg Ty Iegiji Nwrin Technical Data: • Power Consumption: 20 kW • Maximum Operating Temperature: 230°C Equipment: • Internal trolley • External cart • Convection heating (uniform temperature throughout the oven) • Safe opening and closing locks CHOOSE BUMEX SP. Z O.O. High-quality machines among those available on the market Professional consulting and service Warranty included Warranty and post-warranty service Complete technical documentation 100% customer satisfaction All BUMEX SP. Z O.O. products are CE-certified We offer our own transport—prices are specified individually for each offer. We issue invoices with VAT shown separately. Short delivery times! Option to order machines in various, custom configurations and sizes! Please contact us.

Sąlyga: naujas, Gamybos metai: 2025, Einsteiger-Faserlaser-Blechschneidmaschine Niedrige Laserschneidkosten und einfache Bedienung Der modulare Schneidtisch mit Streben spart Zeit beim Zerlegen und verbessert Komfort und Steifigkeit. Die spezielle Faserlaser-Düse und der Schneidprozess ermöglichen schnelleres Sauerstoffschneiden von Baustahl, gas- und kostensparendes Stickstoffschneiden von Edelstahl mit niedrigem Druck sowie hochwertigeres Luftschneiden von Baustahl. Die Faserlaserköpfe können hervorstehende Hindernisse erkennen, wodurch die Schadensrate effektiv reduziert und die Wartungskosten der Laserschneidanlage gesenkt werden. Hodjhv U U Dspfx Agiei Verarbeitbare Materialien: Metall Zustand: Neu Lasertyp: Faserlaser Laserleistung: 1000W, 1500W, 2000W, 3000W Schneidbereich: 3000×1524 mm Positioniergenauigkeit: ±0,05 mm Wiederholgenauigkeit: ±0,03 mm Schneidgeschwindigkeit: 0–100 m/min Unterstützte Grafikformate: AI, BMP, DST, DWG, DXF, DXP, LAS, PLT CNC: Ja Kühlart: Wasserkühlung

Sąlyga: naujas, DESCRIPTION DM100 Z2C – performs edge rounding and removes sharp burrs on both the inner and outer edges of steel, stainless steel, or aluminum parts after laser, shear, or punch separation of metal components ranging in size from 50 x 50 mm up to 1100 x 100 mm. The first station processes the products by means of a contact roller (approx. 55° Shore) with an abrasive belt, removing heavy burrs in the initial step. The second station processes the products with two counter-rotating cross belts from both below and above. The cross belts round the edges of the workpieces on both inner and outer sides. A major advantage is the deburring of products with protective surface film, as only the edges are processed without damaging the film. Technical Data - DM1100 Z2C: Working capacity (Ø mm): 1100 x 100 Number of belt stations (Z): 1 Number of cross belt stations: 2 Abrasive belt dimensions (mm): 1100 x 2200 Abrasive belt speed (m/s): 8–22 Cross belt speed (m/s): 2–8 Feed speed (m/s): 0.6–3.2 Abrasive belt motor per head (kW): 18.5 Cross belt motor (kW) (2x): 3 Feed motor (kW) (3x): 0.18 Total power (kW): 33 Power consumption (A): 62 Extraction port per head (Ø mm): 150 + 185 Dimensions (mm): 3600 x 2330 x 2350 Weight (kg): 5000 Hjdpfx Agsd Ixadeisi

Sąlyga: geras (naudotas), Kabinen-Hängebahnschleudermaschine 250 kg TOSCA TS-250 Typ: Hängebahn (Hook Type) Maximaler Werkstückdurchmesser: 1000 mm Maximale Werkstückhöhe: 1500 mm Maximales Werkstückgewicht: 500 kg Öffnungsbreite der Maschine: mm Anzahl Turbinen: 2 Hsdevpgq Nepfx Agiei Turbinen-Typ: 360 Turbinenraddurchmesser: 360 mm Turbinenleistung: 7,5 kW Max. Turbinenförderleistung: 105 kg/min Typ des Transportgleises: Y Reinigungssystem: Luftseparator (Airwash) Fundament erforderlich: Nein Gehäuseschutz: Mangan + Gummi Erforderlicher Luftdurchsatz: 3.000 m3/h Max. installierte Leistung: ca. 19 kW Gesamtgewicht der Maschine: 0 kg Gesamtbreite der Maschine: mm Gesamthöhe der Maschine: mm Gesamtlänge der Maschine: mm Die Maschine wird derzeit einer Komplettüberholung unterzogen. Sämtliche beschädigten Komponenten werden durch neue ersetzt, Turbinen werden vollständig überholt, Neulackierung in RAL 7037/2000. Die Auslieferung erfolgt im Zustand WIE NEU. !!! WIE NEU ZUSTAND !!!

Sąlyga: geras (naudotas), Gamybos metai: 1985, Megamat Vertical Carousel Model: 130-225-42 Device no.: 4492 Hodpjvc Hk Nofx Agisi Year of manufacture: 1985 Device height: approx. 5410 mm Device width: approx. 2670 mm Device depth: approx. 1300 mm + 300 mm tabletop Number of trays: 42 Tray width: approx. 2155 mm Tray depth: approx. 410 mm Tray height: approx. 200 mm Shelf load capacity: 100 kg Total load capacity: 4,200 kg Colour: beige/green

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2003, darbinis plotis: 215 mm, suvirinimo galia (maks.): 750 kVA, Komplette Gitter- bzw. Schweißgitter-Fertigungslinie Die Anlage besteht aus: - Schweißgitterlinie SCHLATTER PG 24, halbautomatisch, Baujahr 2002 - Gitterträgerlinie SMEI, vollautomatisch, Baujahr 2003 Hsdjqy Ek Aspfx Agiei - Richt- und Abschneidmaschinen 1x Wafios R4 2x VITARI NR16 1x VITARI NR10 - Drahtziehlinie SMEI, Eingangsdraht max. 10 mm, Geschwindigkeit: 4 m/sec - Widerstandsschweißmaschine SMEI - Drahtspitzmaschine SMEI

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2013, Funkcionalumas: visiškai funkcionalus, Ficep 1201 DE 601 Excalibur drilling machine for processing flat steel and profiles, equipped with a longitudinally moving drilling unit. This machine has been fully cleaned and inspected. The drilling machine features a numerically controlled drilling unit that moves in the longitudinal (X-axis) direction, with an adjustment range of 0 - 15,000 mm. It is equipped with an automatic tool changer using an HSK A80 holder for 6 tool positions. Thanks to the 19 kW drill spindle drive, the drilling machine is suitable for use with carbide drilling tools. Technical details: - Profiled and flat steel support with guide rail and fixed table, total length: 15 m - Mobile drill unit for longitudinal positioning on workpieces - Horizontal drill head with a single drilling spindle - Additional drill head storage in X-axis direction - Clamping system for securely fixing material - Position detection device - Maximum profile size: 1200 x 1200 mm - Number of drilling spindles: 1 - Drilling diameter: 5 - 40 mm - Thread cutting: M6 - M30 - Spindle speed: 180 - 3000 rpm - Holder: HSK A 80 Hsdpfx Aev Iamzjgioi - Tool changer: 1 x 6 For more information, please contact us.

Gamybos metai: 1990, Sąlyga: geras (naudotas), Used sideloader Kalmar, the machine has been well maintained For more details, see pictures Hedpfxsh Et E Nj Agiji