Automatinis tekinimo staklės

Gildemeister AS-25

Gamybos metai: 1991, Sąlyga: paruoštas naudoti (naudotas), Two identical Gildemeister six-spindle automatic bar lathes with matching bar loading magazines are available. Number of spindles: 6, max. workpiece diameter: 25mm, spindle speed: 8,000 rpm, spindle bore: 32mm, max. bar diameter: 32mm, max. bar length: 3,300mm, machine dimensions (X/Y/Z): approx. 8,000mm/2,000mm/3,000mm, weight: approx. 5,000kg. Bar loading magazines included. Dkedpfx Asudbmvob Ssg

Gamybos metai: 2002, Sąlyga: dilaminuotas dirbtuvėje (naudotas), Cutting, Drilling, and Marking Line for Beams CIRCULAR SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year: 2002 Serial number: 122.400 Weight without accessories: 10,980 kg - Down-cut circular saw. - Saw unit with gearbox, drive system, and saw blade mounted on a heavy-duty, wear-resistant swivel bearing. - Heavy-duty saw gearbox with helical teeth, hardened and ground, lubricated in oil bath. - Hydraulic saw blade feed, adjustable by setting chart, with very fast return stroke. - Horizontal hydraulic clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic return limitation. - Vertical clamping block with self-adjusting pressure plate. - Bevel cutting device for setting angles from 45° left to 35° right. Dkedpfx Abjhzbipj Sjg - Material sensor for automatic change from rapid to working feed. - Hydraulically liftable feed roller for optimal material transport on the saw table. - Economical lubrication via micro-dosing system, especially suitable for cutting profiles. - Chip collector mounted on the machine bed. Specifications: - Saw blade holder: 100x4x30x250mm - Saw blade diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min - Saw feed speed: 0-400mm/min - Rapid return speed: 2,000mm/min - Total power: 25KW - Working height: 640mm Cutting capacities: At 90° - Angle steel: 250mm - U-beam: 400mm - Double T-beam: 600mm - Wide flange beam: 1008x302mm - Special flange beams: 1000x450mm Miter cutting: IPBv Beam - 75°: 1008x302mm - 60°: 910x302mm - 45°: 716x304mm - 40°: 716x304mm - 35°: 478x307mm IPBs Beam - 75°: 1008x402mm - 45°: 524x357mm IPE Beam - 45°: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX 1215 Serial number: 122.401 Working capacities: - Angle steel (min - max): 80x65x10mm - 250x250x28mm - U-beam (min - max): 80x45mm - 400x110mm - Double T-beam (min - max): 80x46mm - 600x220mm - Wide flange beam (min - max): 100x100mm - 1,008x302mm - Extra-wide flange beams: 1,200x500mm Number of drilling units: 3 - Vertical (Y axis) 1 unit - Horizontal (Z and W axes) 2 units Drilling diameters: 8-40mm RPM: 150 - 1,100 Rapid feed / Rapid return: 3,850mm/min - 8,000mm/min Spindle feed rate: 0-500mm/min Spindle rapid positioning: 15,000mm/min Automatic tool changer: 5 tools per unit (total 15 positions) Total power: 45KW MARKING UNIT FEEDING: 26 METERS INFEED WITH BEAM FEEDER + 6 SIDE ARMS FOR PARALLEL BEAM FEEDING TO ROLLER CONVEYORS 30 METERS OUTFEED ROLLER CONVEYORS + 6 SIDE ARMS 4 SIDE ARMS FOR SMALL SECTIONS MOST ROLLERS ARE MOTORIZED Approximate total installation length: 60 linear meters from infeed to outfeed. *Installation layout available upon request.

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2021, Funkcionalumas: visiškai funkcionalus, Twin-spindle CNC lathe with 2 spindles, 3 turrets, and 3 Y-axes Each turret with 15 stations, BMT 44 Driven tools 2x C-axis 3x Y-axis Control: Fanuc 32i-TB Bar capacity: 65 mm Left spindle: 15/11 kW, Hainbuch Spanntop mini Axzug size 65 Right spindle: 11/7.5 kW, Kitagawa three-jaw chuck Finished parts gripper Conveyor belt Bar feeder interface Coolant system, separate tank 200 l Cooling unit High pressure on turrets 1-3 via M-function 15 bar/40 l/min 2x Brinkmann pump Renishaw tool measurement for all turrets Tool monitoring for spindle and driven tools Spindle flushing through sub-spindle high-pressure coolant, Deublin rotary union Dksdpevxu Eaefx Ab Sjg Hinged belt chip conveyor Transformer Available immediately

Sąlyga: naudotas, Gamybos metai: 2011, Bar diameter: 32 mm Spindle bore: 38 mm Turning length: 320 mm Spindle speed: 8,000 rpm C-axis: 0.001° Pick-off station: 32 Sub-spindle turning length: 150 mm Dedew Ed Tfspfx Ab Sjkg Sub-spindle speed: 8,000 rpm Sub-spindle C-axis: 0.001° Number of tools: 4+7+6+10 = 27 Number of milling stations: 4+4 Control: Mitsubishi M70 Number of axes: 5 + 2x C axis (total 7) Chip conveyor: yes (LNS) Total power requirement: 7.5/5.5 kW Machine weight: approx. 3,300 kg Space requirement: approx. 2.5 x 1.2 x 1.82 m plus FMB CNC Swiss-type automatic lathe Citizen A32-VII PL, year of manufacture 08/2011 with bar feeder FMB Turbo 3-36 Very good condition! Main spindle motor and bearings are new. Delivered complete with all accessories, clamping devices, and manuals.

Sąlyga: naudotas, TECHNICAL DATA - Number of axes: 5 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 20 mm - Max. machining length: 210 mm - Spindle speed: 200 – 10,000 rpm - Spindle drive power: 2.2 / 3.7 kW - Minimum C-axis resolution: 0.001° SUB SPINDLE - Max. bar diameter: 20 mm - Spindle speed: 200 – 12,000 rpm - Spindle drive power: 2.2 / 3.7 kW - Minimum C-axis resolution: 0.001° TOOL HOLDER 1 - Number of positions: 5 - Number of driven positions: 3 - Driven tool speed: 8,000 rpm TOOL HOLDER 2 - Number of positions: 3 FRONT TOOL STATION - Number of positions: 8 Dkjdjuhbbzspfx Ab Ssg BACKWORKING - Number of positions: 4 - Number of driven positions: 2 - Driven tool speed: 8,000 rpm ELECTRICAL SUPPLY - Total power consumption: 11 kVA DIMENSIONS AND WEIGHT - Footprint: 1,655 x 1,125 mm - Machine height: 1,700 mm - Machine weight: 2,000 kg MACHINE RUNNING HOURS - Operating hours: 13,837 h EQUIPMENT - CNC control: Fanuc Oi-TD - 3-color status lamp - Powered guide bushing - Part removal device - Parts conveyor - Parts ejector - Chip conveyor - Coolant tank * with high-pressure pump: 70 bar - Bar feeder: IEMCA ELITE 220 E / 32 LL - Fire suppression system * NB: Functionality not guaranteed. Must be checked by a qualified company on behalf of the buyer. - Electrical transformer

Sąlyga: naudotas, TECHNICAL DATA - Number of axes: 7 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 20 [mm] - Max. machining length: 180 [mm] - Spindle speed: 10,000 [rpm] - Spindle drive power: 2.2 [kW] - Minimum C-axis resolution: 0.001 [degrees] SUB SPINDLE Dedpfsuha Slox Ab Sekg - Max. bar diameter: 20 [mm] - Spindle speed: 10,000 [rpm] - Spindle drive power: 1.5 [kW] - Minimum C-axis resolution: 0.001 [degrees] TOOL HOLDER 1 - Number of positions: 9 - Number of powered positions: 4 - Driven tool speed: 6,000 [rpm] - X/Y travel: 50/325 [mm] FRONT TOOL POST - Number of positions: 4 BACK WORKING - Number of positions: 4 ELECTRICAL SUPPLY - Supply voltage: 400 [V] MACHINE HOURS - Power on hours: 31,902 [h] - Spindle hours: 12,146 [h] EQUIPMENT - Control: Fanuc 32-iB - Interface: USB - Parts catcher - Parts conveyor - Parts ejector - Chip conveyor - Coolant tank * with high-pressure pump * with paper filter - Bar feeder: IEMCA 338-HD - Coolant reservoir - Electrical transformer - Number of driven tool holders: 3

Sąlyga: naudotas, Deburring and Fine Grinding Machine for Sheet Metal / Flat Material, new The compact processing center for deburring, slag removal, derusting, oxide layer removal, edge rounding, fine grinding, and polishing of metal surfaces. Thanks to its fixed working height, this machine can be optimally integrated into a production line and is suitable for processing large workpieces. Working width: 1150 - 1350 mm Maximum part weight: 500 kg Wide belt grinder with abrasive belt length: 2620 mm Dkodpfx Aonah Tdeb Sog Standard equipped with vacuum holding system, optionally with magnetic holding system The use of 2620 mm long abrasive belts ensures a consistently smooth surface and reduces consumable costs due to the longer belt service life. Due to the modular design of the machine, it is possible to offer the optimal configuration for the customer’s processing requirements. The machine structure can accommodate up to 5 internal processing units and 2 additional external processing units. The high rigidity of the machine frame and feed table, combined with advanced mechanics and electronics, make this series a universal processing center for deburring and finishing operations. Please contact us for further information and images via email at mail(at) or

Sąlyga: naudotas, Techninės detalės: Veleno perėjimas: 60 mm Sukimosi ilgis: 45 mm Sukimosi skersmuo: maks. 56 mm Gręžimo gylis: maks. 70 mm Sukimosi greitis: 48 - 1500 (velenas) aps./min. Sriegiavimas: Sukimosi greitis: 24 - 750 aps./min. Įrankio revolveris - stočių skaičius: 8 Bendra galia: 5,5 kW Dsdpsu Iwyiefx Ab Sskg Staklių svoris apie: 2,4 t Užimamas plotas apie: Išmatavimai: 2,1 x 1,0 x 1,8 m Kreive valdoma tekinimo automatika pagal šabloną. Ruonis apkabinamas per tvirtinimo patrontą. Revolverinė galvutė: Diskinis revolveris Hahn & Tessky Esslingen, įrankio eiga 80 mm, reguliavimas 36 mm, atstumas tarp tvirtinimo galvutės ir revolverio min./maks.: 72/188 mm 2 vnt. sukimo atramų, darbo eiga 45 mm 2 vnt. atpjovimo atramų, darbo eiga apie 40 mm Aušinimo skysčio sistema Staklės neprijungtos. Parduodama už siūlomą kainą.

Sąlyga: geras (naudotas), Gamybos metai: 2009, veikimo valandos: 48 570 h, Funkcionalumas: visiškai funkcionalus, Įranga: dokumentacija / vadovas, sūkių greitis be galo kintamas, Gamintojas: MIYANO Modelis: ABX-64SY Pagaminimo metai: 2009 FANUC 31i valdymas, varomieji įrankiai, revolverinė galva, Dkodpfxexzrpwo Ab Sog C ašis, ruošinių konvejeris, drožlių transporteris, ruošinių griebtuvas, Multifeed strypų padavimo žurnalas

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2020, Hydraulic 400-ton Column Press Suitable for continuous shift operation, with the following basic specifications: a) Closing speed: 100 – 450 mm/sec b) Opening speed: 50 – 250 mm/sec (adjustable via touchscreen) c) Pressing speed: 5 – 60 mm/sec (adjustable via touchscreen) d) Piston accumulator with approx. 4 nitrogen cylinders e) Table size (clamping surface): 2700 x 1700 mm (viewed from the front, between the columns) f) Total table size: 3400 x 1700 mm g) 28 mm T-slots according to customer specifications h) Table, ram, and press head are stress-relieved annealed. i) Column diameter: 250 mm j) Ram size: 3400 x 1700 mm (clamping surface 2700 x 1700 mm) k) Overall machine dimensions approx. 3900 x 2200 (footprint) x 5700 mm height l) Oil temperature monitoring (adjustable via touchscreen) m) Automatic lubrication (adjustable via touchscreen) n) Free positioning of the ram (adjustable via touchscreen) o) KEYENCE light barriers, 14 mm, on front and rear sides p) Oil circulation cooling (adjustable via touchscreen) q) Pressure-holding valve 0 to 600 sec. (adjustable via touchscreen) r) Table plate size 3400 x 1700 mm, precision milled s) Laterally monitored doors, 1200 mm high, 1000 mm wide t) RITTAL control cabinet, 2200 mm wide, up to 20 m distance from the press u) Pressure adjustment from 50 to 400 tons (adjustable via touchscreen) v) Stroke limitation selectable by pressure or position w) Programmable operation, setup mode, single stroke + continuous stroke (adjustable via rotary switch) x) Swiveling control console with 15-inch touchscreen monitor y) Two-hand operation on both sides z) Prepared for automatic material feed (SIEMENS S7 1500) aa) Machine frame primed and painted bb) Installation, commissioning, and training available at additional cost The hydraulics of the presses we offer are configured exclusively with BOSCH-REXROTH/Parker/HAWE components. Only (SIEMENS) components that are readily available in Germany are used in the control cabinet. Safety technology is supplied entirely by SICK, except for the light barriers. The control system is provided by SIEMENS (S7 1500), including the 15-inch touchscreen monitor. The delivery also includes the SIEMENS remote maintenance unit SECOME Ethernet. SPECIAL FEATURE: Our design with two press cylinders and the piston accumulator allows full performance to be achieved with a main motor of just 90 kW. Technical details are provided below in 1.3. Technical Specifications Design Press design: Column press Dodpfx Abog Iihws Sskg Thermal neutral: 80 – 120°C Number of operating sides: 2 Forces Pressing force max.: 4,000 kN Free pull-off force max.: 600 kN Pressure build-up time (closed tool steel to steel): Max. 2 sec Dimensions – Minimum intended tool height: 600 mm Maximum opening width: 1600 mm Stroke and min. opening: 1000/600 mm Table height above floor: 820 mm Height above floor (overall height): approx. 5700 mm Hall height min.: 7000 mm Parallelism deviation at 20°C: +/- 0.1 mm Deflection (determined at max. closing force with 70% occupancy): ≤ 0.17 mm/m Weight Total weight of the press without operating materials: approx. 52 t Speeds (see attached cycle diagram) Rapid-closing: 100 – 450 mm/s Pressing speed at F max.: [data continues]