CNC tekinimo ir frezavimo centras

Miyano ABX-64SY

Gamybos metai: 2006, Sąlyga: paruoštas naudoti (naudotas), Siūlomas Mazak CNC 5 ašių tekinimo ir frezavimo centras su priešpriešiniu velenėliu. Švytavimo skersmuo: 820 mm, apdirbimo skersmuo: 820 mm, apdirbimo ilgis: 1500 mm, maks. ruošinio svoris griebtuve/tarp centrų: 650 kg/150 kg, pagrindinio veleno greitis: 1600 aps./min, veleno skylė: 185 mm, galia: 30 kW/40 kW, atramos jėga: 15 kN, pinolės eiga: 1466 mm, įrankio tvirtinimas: BT50, apsukos: 10000 aps./min, eigės X/Y/Z: 870 mm/500 mm/1600 mm, greitasis eiga: 40 m/min. Įrenginio matmenys X/Y/Z: apie 6500 mm/3700 mm/3200 mm, svoris: apie 26000 kg, valdymas: Mazatrol Matrix. Yra dokumentacija. Apžiūra vietoje galima. Įranga yra Kinijoje. Fgedoxf Iklspfx Admek

Sąlyga: geras (naudotas), Gamybos metai: 2004, Spindle bore: 60 mm Turning length: 280 mm Control system: Siemens 840 D Main spindle speed: 6300 rpm Drive power (spindle motor): 3.3 kW Turret 1: Disc turret Number of tools in turret 1: 8 Tool system: DIN 69 880 / 25mm X-axis travel: 90 mm Z-axis travel: 280 mm Feed force: 5500 N Rapid traverse: 24 m/min Milling spindle drive power: 5.000 kW Turret 2: Dovetail turret Number of tools in turret 2: 6 X-axis travel: 81 mm Z-axis travel: 80 mm Feed force: 5500 N Rapid traverse (X-axis): 16 m/min Rapid traverse (Z-axis): 24 m/min Machine weight: approx. 2.5 t Space requirement: approx. 6.0 x 2.0 x 2.0 m The INDEX ABC is a compact CNC lathe for short-turned parts made from bar stock. It features a slant-bed design with two independent turrets. The upper turret is mainly designated for internal machining and cut-off-side operations, while the lower turret handles external machining. This turret configuration allows for collision-free operation and simple programming with high tool availability. The large open working area promotes optimal chip flow. Working area features two turrets: "Turret 1": - Disc turret with 7 radially arranged tool positions Ø 25 mm DIN 69880 and one position for the reinforced synchronized spindle at turret station 8. With an adapter, tools with 1'' shanks may also be used. The turret head is prepared for the V-guide system. - Synchronized spindle for backworking, allowing simultaneous parallel machining with the main spindle. Collet chuck Ø42 or 3-jaw gripper chuck for internal and external clamping. Jaw stroke 0.6 mm. Clamping diameter (external) 75 mm. - Back-drilling unit. Starting from the center of the working spindle in a clockwise direction, three stationary back drilling tools are arranged. These are located on the pitch circle of the synchronized spindle. Backworking takes place simultaneously to main spindle machining. Two additional tools can also be mounted and may be fitted with driven tool units. "Turret 2": - Turret with 6 symmetric dovetail tool holders, each station equipped with two mounting bores for cylindrical shank tools. The following tool systems can be used: Fgjdpfxjwbvhaj Admsk - Stationary tools moveable in the Z-direction - Driven tools with Ø25 mm cylindrical shank (two positions per station can be equipped) - Including bar feeder LM 3200 - + various accessories (various diameter guide bushings/tool holders) Technical data: - Bar material diameter: (Ø 25 / Ø 36 / Ø 52) --> Round: Ø 8 - 25.4 / 8 - 36 / 8 - 52 mm --> Square SW: Ø 6 - 14 / 6 - 20 / 6 - 20 mm --> Hexagon SW: Ø 7 - 22 / 7 - 30 / 7 - 41 mm --> Octagon SW: Ø 7 - 22 / 7 - 32 / 7 - 40 mm --> Maximum bar length: 3200 mm --> From Ø 25 mm bars: minimum. 2,500 mm --> Up to Ø 25 mm bars: minimum. 1,500 mm --> Bar tray capacity = approx. 300 = 6 x Ø 52 mm bars Mass (bar feeder): 700 kg

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2020, veikimo valandos: 1 139 h, Funkcionalumas: visiškai funkcionalus, tekėjimo ilgis: 599 mm, tekėjimo skersmuo: 530 mm, ašies variklio galia: 11 000 W, veleno greitis (min.): 50 aps./min, veleno greitis (maks.): 6 000 aps./min, veleno skylė: 56 mm, X ašies eiga: 530 mm, Y ašies eiga: 100 mm, Z ašies eigos atstumas: 599 mm, greitas poslinkis X ašimi: 30 m/min, greitas poslinkis Y ašis: 15 m/min, greitasis eiga Z ašyje: 30 m/min, Outstanding machine with the option for integration with a brand new IEMCA Master 52 bar feeder, featuring only 1,100 operating hours. Multitasking capability enables simultaneous milling and turning operations. Rugged and precise construction with a rigid cast iron frame. Dual tool magazines: Revolver turret plus an internal magazine housing an additional 12 CAPTO tools stored securely inside, 12 tools mounted on the turret, and 6 hybrid square 25 mm tool holders (refer to the attached technical data sheet). Fgsdpfxsvv Tvfj Admjk Twin spindle design allows for secondary operations. Equipped with Fanuc 0i-TF CNC and Manual Guide. Includes Tool Overload Detection System (automatic tool overload monitoring). Full documentation provided. Also equipped with transformer, chip conveyor, 15-bar coolant pump, presetting device, parts catcher and finished part output conveyor, and work lamp.

Sąlyga: geras (naudotas), Gamybos metai: 2007, Gildemeister Lathe NEF 600 Year of manufacture: 2007 Control: Heidenhain Plus Fgedpfx Ajucl Aljdmek Max. turning diameter: 600 mm Distance between centers: 1,250 mm Swing diameter over bed: 600 mm Cross travel: 320 mm Main spindle: Max. speed range - main spindle: 3,000 rpm Spindle bore: 90 mm Chuck diameter: 320 mm Turret: Number of tool stations: 8 positions Total power requirement: 42 kVA Machine weight: approx. 5.0 t Space requirements: approx. 3.6 x 2.14 x 1.95 m Accessories: rinsing gun, Schunk chuck 315 mm, tailstock MK 5

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, sukimosi skersmuo virš skersinio stumduko: 580 mm, veleno skylė: 84 mm, tekėjimo skersmuo: 870 mm, Geminis lathe model GE 870 with 4000mm distance between centers, swing over bed 870mm, swing over cross slide 580mm, swing over gap 1100mm, gap length 340mm, spindle speeds from 13 to 1000 rpm, spindle bore diameter 84mm. Equipped with a 3-jaw chuck diameter 315mm and a 4-jaw independent chuck diameter 500mm, includes fixed steady rest. Lathe is generally in good condition. Fgsdpfx Adewqz D Ejmek

Sąlyga: naudotas, CNC Gantry Drilling and Milling Machine ANAYAK Type HVM-3800-P Bed-type milling machine, designed similarly to a plate-type boring mill with fixed table Machine No.: M-20021203 Year of manufacture: 2002 “Refurbished 2025” The machine will be fully refurbished in 2025 and can then be inspected at the warehouse in 37235 Hessisch Lichtenau. Travel distances X: 3200 mm, Y: 1200 mm, Z: 1500 mm Table size 3800 x 1200 mm T-slots 8 slots, 22 mm width, spacing 130 mm Table load capacity max. 25 tons (fixed table – virtually unlimited load capacity) Spindle taper ISO 50 (DIN69871-A) (drawbar DIN 69872-B) Spindle speed 60–4000 rpm, stepless Feed rate up to 10,000 mm/min, stepless Rapid traverse X + Y 20 m/min Rapid traverse Z 10 m/min Fgjdpoxcgtgsfx Admjk Spindle drive 22 / 30 kW Power supply 400 Volt, 50 Hz, 50 kVA - 30-station automatic tool changer - Spindle drive with 2 speed ranges - With automatic tool changer and tool magazine - Orthogonal milling head with hydro-mechanical tool clamping - Orthogonal milling head, fully automatic swiveling in two 45° planes – B + C axis - HEIDENHAIN iTNC 530 CNC control, with electronic handwheel - Pre-equipped for wireless touch probe (probe and receiver not included) - Additional HF spindle, 18,000 rpm – for attachment - Free-standing control cabinet - Chip conveyor installed between gantry bed and machine table - 32,078 operating hours displayed - Coolant system - Free-standing hydraulic unit - Operating manual with circuit diagrams Machine installation footprint: L x W approx. 1000 x 700 cm Machine height: approx. 410 cm Weight (complete) approx. 33 tons Good condition

Sąlyga: naudotas, Gamybos metai: 2020, Technical Details: Swing Diameter: 670 mm Turning Length: 1540 mm Control: F31iB5 Celos Fanuc 35iB5 Maximum Swing Over Bed Cover: 700 mm Travel Paths Turret No. 1 (Milling Spindle) x/y/z: 495 / ± 150 / 1562(+164) mm B-Axis Rotation: -30° / +210° Rapid Traverse Turret 1 (Milling Head) x/y/z: 40/40/40 m/min Milling Spindle Speed: 12,000 rpm Drive Power - Milling Spindle: 20.2/18.8 kW Milling Spindle Torque: 120 / 44 Nm Tool Interface Milling Spindle: Coromant Capto C6 Tool Magazine for Milling Spindle (Turret 1): 76 Tool Change Time Tool/Tool Milling Spindle: 1.25 s Spindle 1 Speed: 3,000 rpm Spindle 1 Power: 36 / 30 / 25 kW C-Axis Spindle 1: 0.001° Bar Capacity Spindle 1: 102 mm Spindle 2 Speed: 4,000 rpm Spindle 2 Power: 26 / 22 / 15 kW C-Axis Spindle 2: 0.001° Bar Capacity Spindle 2: 80 mm Space Requirement approx.: 7.8 x 3.6 x 2.9 m Linear Glass Scales on Axes: X, Y Programmable Steady Rest: KLU-A530 & SLU-X3.2 Accessories: Chip Conveyor Tool Measurement Spindle Load Monitor Air Blow System Air Blow System via ICS System to the Tool Spindle 1 Power Chuck Kitagawa 250 (B 210) mm Fgjdpfx Aswl Ag Dsdmek Spindle 2 Power Chuck Kitagawa 250 (B 210) mm Interface for Internal Coolant Supply 70 bar Tailstock Specification for Sub Spindle Workpiece Measurement with Renishaw OMP60 Probe Detachable Handwheel Workpiece and Total Counter Three-Color Signal Lamp Robot Interface Matris Robot System R-2000iC/165F Automatic Door Rotoclear Viewing Window Fast Clamping Cycles Program Restart Four-Color Signal Lamp Ethernet I/P Interface Manual Tool Measuring Arm Automatic Door Oil Mist Separator Oil Skimmer Spindle Probe for Workpiece Measurement External Air Blow System for Sub Spindle Spindle 1 Coolant Nozzle Spindle 2 Coolant Nozzle Coolant Gun Internal Coolant Supply 70 bar with Knoll Filtration Very high-quality CNC turning-milling center equipped with sub spindle, which can also be used with tailstock function. The machine has an automatic door and Matris robot system type R-2000iC/165F.

Sąlyga: geras (naudotas), Gamybos metai: 2003, X ašies eiga: 14 000 mm, Y ašies eiga: 4 000 mm, Z ašies eigos atstumas: 1 500 mm, veleno greitis (maks.): 2 500 aps./min, padavimo ilgis W ašis: 900 mm, ašies skersmuo: 152 mm, FPT MAR-X 3, Baujahr 2003 CNC SELCA 4045 PLUS DIGITAL, Baujahr 2003. Die CNC kann auf Heidenhain 620 umgerüstet werden. FPT TRT25 Rundtisch, 25 Tonnen. Zweiachsiger Kopf, 144 x 144. X, Längsverfahrweg (Ständer): 14.000 mm Fgodpfxewdm A Hs Admsk Y, Vertikalverfahrweg (Schlitten): 4.000 mm Z, Pinolenhub: 1.500 mm W, Spindel Ø 152,4 mm: 900 mm Spindelaufnahme: ISO 50 Spindeldrehzahl: 0 - 2.500 U/min Spindelmotor: 48 kW Automatischer Werkzeugwechsler: 40 Werkzeuge FPT TRT25 Rundtisch, 360.000°: 2.500 x 2.500 mm Rundtisch-Längsverfahrweg: 2.000 mm Tischbelastung: 25 Tonnen

Sąlyga: naudotas, Gamybos metai: 2023, Auf der Suche nach einer High-End-Miyano? Dann schauen Sie sich dieses Exemplar an! Gerade einmal 18 Monate alt und mit nur etwas über 1000 Betriebsstunden – der Zustand ist wie neu! Die Maschine steht noch am aktuellen Standort und kann unter Strom besichtigt werden. Laut Miyano-Spezifikation handelt es sich um eine Miyano ABX-64SYY – das Spitzenmodell mit zwei Spindeln, zwei Revolvern und Y-Achse an jedem Revolver. Dank simultaner Bearbeitung an linker und rechter Spindel mit den oberen und unteren Revolvern, beide mit Y-Achse, können Produkte mit komplexen Geometrien effizient und komplett von vorne und hinten gefertigt werden. Die Maschine bietet hohe Steifigkeit und ein hohes Drehmoment von 40 Nm angetriebenen Werkzeugen – schwere Fräsbearbeitung ist somit stabil möglich. Zwei Revolver mit insgesamt 24 angetriebenen Werkzeugpositionen ermöglichen komplexe Bearbeitungen wie ein Bearbeitungszentrum. Zur Sonderausstattung gehören ein Teileförderband, Hainbuch-Spannzangen auf beiden Spindeln, Hochdruck-Kühlmittelzufuhr, Messtaster und eine auf dem unteren Revolver montierte Lünettenauflage. Bearbeitungskapazität & Spannsystem: - Maximale Stangendurchmesser SP1/SP2: Ø64/51 mm (Spannzange) - Kraftspannfutter SP1/SP2: 6" hydraulischer Antrieb - Maximale Drehlänge: 125 mm Spindel: - Spindelaufnahme SP1/SP2: A2-8 / A2-6 - Spindel-Motorleistung (30 min/dauer): SP1 15/11 kW, SP2 7,5/5,5 kW - Spindeldrehzahlbereich SP1: 50–5.000 min⁻¹ | 40–4.000 min⁻¹, SP2: 50–5.000 min⁻¹ Revolver (oberer L/R und unterer): - 2 x 12-Stationen-Revolver - Schaft-Quadrathöhe: □20 mm - Bohrerschaftdurchmesser: Ø40 mm, Ø20 mm, Ø25 mm Verfahrwege: - X1/X2-Achse: 190 mm, Z1-/Z2-Achse: 550/721 mm, Y1/Y2-Achse: ±40 mm, Zs-Achse: 756 mm Eilganggeschwindigkeit: - X1/X2-Achse: 16 m/min - Z1/Z2-Achse: 30/20 m/min Fgsdpfx Adew I D Duemek - Y1/Y2-Achse: 12 m/min - Zs-Achse: 30 m/min Angetriebene Werkzeuge: - Max. Anzahl angetriebener Werkzeuge: 24 - Drehzahlbereich angetriebene Werkzeuge: 60–6.000 min⁻¹ - Werkzeug-Antrieb: AC-Servo 4,5 kW Maschinenabmessungen: - Maschinenhöhe: 2.222 mm - Aufstellfläche: 3.290 × 2.204 mm - Maschinengewicht: 10.900 kg Maschinenbezeichnung: Miyano ABX-64SYY

Sąlyga: naudotas, Gamybos metai: 2016, Travel - X axis: 800 mm Travel - Y axis: 450 mm Travel - Z axis: 510 mm Control: HEIDENHAIN TNC620 Table size (L x W): 1,000 x 450 mm Tool changer capacity: 30 positions Fgjdpfxswq S Als Admsk Vertical Machining Centre | DOOSAN DNM 4500 equipped with 30-position tool changer, through-spindle coolant system (IKZ), and chip conveyor. The machine has only 5,365 spindle hours. The machine is in well-maintained condition. We are happy to share a video of the machine at its original location upon request. Technical data of the machine will follow shortly. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DNM4500 | DNM-4500