Kaltenbach HDM 1431 pjovimo ir gręžimo linija

Kaltenbach HDM1431

Cutting, Drilling, and Marking Line for Beams

CIRCULAR SAW

Brand: KALTENBACH
Model: HDM 1431 / T13 / SP-CNC
Year: 2002
Serial number: 122.400
Weight without accessories: 10,980 kg

- Down-cut circular saw.
- Saw unit with gearbox, drive system, and saw blade mounted on a heavy-duty, wear-resistant swivel bearing.
- Heavy-duty saw gearbox with helical teeth, hardened and ground, lubricated in oil bath.
- Hydraulic saw blade feed, adjustable by setting chart, with very fast return stroke.
- Horizontal hydraulic clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic return limitation.
- Vertical clamping block with self-adjusting pressure plate.
- Bevel cutting device for setting angles from 45° left to 35° right.
- Material sensor for automatic change from rapid to working feed.
Crodpfxehzbipe Agmsc
- Hydraulically liftable feed roller for optimal material transport on the saw table.
- Economical lubrication via micro-dosing system, especially suitable for cutting profiles.
- Chip collector mounted on the machine bed.

Specifications:
- Saw blade holder: 100x4x30x250mm
- Saw blade diameter: 1,430mm
- Cutting width: 9.5mm
- Cutting speed: 10 to 20m/min
- Saw feed speed: 0-400mm/min
- Rapid return speed: 2,000mm/min
- Total power: 25KW
- Working height: 640mm

Cutting capacities:
At 90°
- Angle steel: 250mm
- U-beam: 400mm
- Double T-beam: 600mm
- Wide flange beam: 1008x302mm
- Special flange beams: 1000x450mm

Miter cutting:
IPBv Beam
- 75°: 1008x302mm
- 60°: 910x302mm
- 45°: 716x304mm
- 40°: 716x304mm
- 35°: 478x307mm

IPBs Beam
- 75°: 1008x402mm
- 45°: 524x357mm

IPE Beam
- 45°: 600x220mm

DRILLING UNIT

Brand: Kaltenbach
Model: KDX 1215
Serial number: 122.401

Working capacities:
- Angle steel (min - max): 80x65x10mm - 250x250x28mm
- U-beam (min - max): 80x45mm - 400x110mm
- Double T-beam (min - max): 80x46mm - 600x220mm
- Wide flange beam (min - max): 100x100mm - 1,008x302mm
- Extra-wide flange beams: 1,200x500mm

Number of drilling units: 3
- Vertical (Y axis) 1 unit
- Horizontal (Z and W axes) 2 units

Drilling diameters: 8-40mm
RPM: 150 - 1,100
Rapid feed / Rapid return: 3,850mm/min - 8,000mm/min
Spindle feed rate: 0-500mm/min
Spindle rapid positioning: 15,000mm/min
Automatic tool changer: 5 tools per unit (total 15 positions)

Total power: 45KW

MARKING UNIT

FEEDING:

26 METERS INFEED WITH BEAM FEEDER + 6 SIDE ARMS FOR PARALLEL BEAM FEEDING TO ROLLER CONVEYORS
30 METERS OUTFEED ROLLER CONVEYORS + 6 SIDE ARMS
4 SIDE ARMS FOR SMALL SECTIONS
MOST ROLLERS ARE MOTORIZED
Approximate total installation length: 60 linear meters from infeed to outfeed.

*Installation layout available upon request.

Skelbimas buvo automatiškai išverstas. Galimos vertimo klaidos.