Kūno presas

Ganner Concept 70 Eco

Gamybos metai: 2025, Sąlyga: naujas, New Machine Year of manufacture: 2025 Features and technical data: Complete in standard configuration with: - Robust, torsion-resistant steel frame, manufactured as a welded and bolted structure - Top lamellar pressure beam with 6 elements, side lamellar pressure beam with 5 elements - Lamellar pressure beams with field-proven tolerance compensation (Ganner system) for tightly clamped carcass joints - Counterpressure surfaces (side pressure wall, base) made from 38 mm thick, coated, continuous support panels - Continuous pressing area with a height of 95 mm at the lower vertical pressure beam - Electromotive adjustment of the two pressure beams via precision trapezoidal threaded spindles (with enhanced lead and runout accuracy) and high-performance slide nuts with grease reservoir - Pressing is performed electromotively, using 2 separate worm gear motors (2 x 0.75 kW each) - The pressure force of the beams can be steplessly adjusted electronically with 2 potentiometers and is regulated via frequency converters, ensuring completely wear-free pressure control - Pressing force for horizontal pressure beam: min. 500 daN (kg) up to stepless max. 2200 daN (kg) - Pressing force for vertical pressure beam: min. 300 daN (kg) up to stepless max. 2200 daN (kg) - Pressing and adjustment speed of the pressure beams with fine positioning, selectable via 3-step switch: 5 / 10 / 25 mm/sec - Jog function for precise positioning of both pressure beams, e.g., for low pressing forces, drawers, and carcasses at 45° - Simple operation via 6 separate push buttons; 8 movement cycles can be selected via control panel - Freely adjustable press time preselection 0–30 min (switchable to seconds or hours) with individually programmable opening dimensions of the two pressure beams - Re-press function to increase or decrease pressing force during the pressing process - Working height/loading height: 300 mm Kdodpfxew Nafkj Aghow - Working dimensions: Length min. 150 mm, max. 2500 mm; Height min. 150 mm, max. 1400 mm; Depth: 700 mm Including surcharge for rapid traverse speed for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors in the pressure beams. Press speed: 5 / 10 / 25 mm/sec and rapid traverse speed: 50 mm/sec. Sensors can be disabled for pressing special components. Including set of machine feet for 500 mm working height Location: Flörsheim Availability: Short-term

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2016, LAMELLA – CARCASE PRESS GANNOMAT "CONCEPT 70 ECO" Complete in standard configuration comprising: - Stable, torsion-resistant steel frame in welded and bolted construction - Top lamella press beam with 6 elements, side lamella press beam with 5 elements - Lamella press beams with proven tolerance compensation (Ganner system) for tightly compressed carcase joints - Counter-pressure surfaces (side pressure wall, base) are continuous, 38 mm thick coated support plates - Continuous pressing surface with a height of 95 mm on the bottom vertical press beam - Electromotoric adjustment of both press beams via precision trapezoidal threaded spindles (with enhanced pitch and concentricity accuracy) and high-performance lead nuts with grease reservoirs - Pressing is carried out electromotorically via 2 separate worm gear motors (2 x 0.75 kW) - The pressing force of the press beams is infinitely electronically adjustable via 2 potentiometers and controlled by frequency inverters, thus the pressing force regulation is absolutely wear-free - Pressing force for horizontal press beam min. 500 daN (kg) up to stepless max. 2200 daN (kg) Pressing force for the vertical press beam min. 300 daN (kg) up to stepless max. 2200 daN (kg) Pressing and adjustment speed of the press beams with fine positioning via 3-stage selector switch: 5 / 10 / 25 mm/second Easiest operation - Working height/loading height: 300 mm - Working dimensions: Length min: 150 mm, max: 2500 mm Kdsdpsw Td A Isfx Aghsw Height min: 150 mm, max: 1400 mm Depth: 700 mm Machine No. 563.624 400V, 3Ph, 50Hz (3.2 kVA, 16 A) Set of machine feet for working height of 500 mm Operating manual in German Completely overhauled by Ganner, parts warranty 6 months Location: ex stock 54634 Bitburg - immediately available -

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2024, Technical Data: Lamella carcass press from our showroom; Kdsdjb Eln Dspfx Aghow Working range: width from 150 - 2,550 mm, height from 150 - 1,400 mm; depth from 150 - 700 mm; Variable pressing force adjustment of the side press beam: 300/700/1100/1400/1800/2200 dN(kg); Variable pressing force adjustment of the top press beam: 500/800/1200/1500/1900/2200 dN(kg); Simple operation via 6 separate push buttons, freely adjustable pressing time preselection with automatic opening, loading height 300 mm. The machine is available in our showroom and can be delivered immediately. Location: ex-stock 54634 Bitburg

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2013, LAMELLA/CARCASS PRESS GANNOMAT "CONCEPT 70 ECO" Kodow Tdymopfx Aghodw Complete in standard configuration with: Carcass joints. - Counter-pressure surfaces (side pressure wall, base) are 40 mm thick, coated, continuous support plates - Electromotoric adjustment of both press beams via precision trapezoidal threaded spindles (with enhanced pitch and concentricity accuracy) and high-performance running nuts with grease reservoir. - Pressing operation is electromotorically driven by 2 separate worm gear motors (2 x 0.75 kW) - Pressing force: 2000 daN (kg) per pressing beam. - The pressing force of the beam is electronically regulated and set via frequency inverter, ensuring completely wear-free torque transmission. - Pressing and adjustment speed: 25 mm/sec. - Simple operation via 6 separate push buttons, 6 motion sequences selectable via control unit. - Freely adjustable pressing time preset with automatic opening function 0-30 min (switchable to seconds or hours). - Working height/loading height: 300 mm - Working dimensions: Length min: 150 mm, max: 2550 mm; Height min: 150 mm, max: 1400 mm; Depth: 700 mm - 1 selector switch for variable pressing force 1000 / 1500 / 2000 daN (kg) Machine no. 380.324 400V, 3Ph, 50Hz (2.5 kVA, 16 A) Set of machine feet for 500 mm working height included Used machine: Year of manufacture 2013, completely overhauled by Ganner, 6-month parts warranty Special price: ex-stock 54634 Bitburg - Immediately available -

Sąlyga: naujas, Gamybos metai: 2025, Gannomat Concept 70 Eco Lamella Carcase Clamp with Rapid Traverse Technical Data: Kdsdoiidm Njpfx Aghsw Lamella carcase press from our showroom; Working range: width from 150 to 2,500 mm, height from 150 to 1,400 mm; depth 700 mm; - Upper lamella pressure beam with 6 elements, side lamella pressure beam with 5 elements - Lamella pressure beams with proven tolerance compensation for tightly pressed carcase joints - Counterpressure surfaces are 40 mm thick, coated continuous support plates - The pressing force of the pressure beams is continuously electronically controlled via 2 potentiometers and set by frequency inverter, thus the torque transmission is completely wear-free. - Pressing force for horizontal pressure beams: min. 500 daN (kg) up to stepless max. 2,200 daN (kg) - Pressing force for vertical pressure beams: min. 300 daN (kg) up to stepless max. 2,200 daN (kg) - Including option: Rapid traverse speed for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors integrated into the beams; pressing speeds of 5/10/25 mm/sec and rapid traverse speed of 50 mm/sec; sensors can be deactivated for clamping special parts. - Inch mode for precise positioning of both pressure beams, e.g. for low pressing forces, drawers, and carcases at 45 degrees. Simple operation via 6 separate push-buttons, freely adjustable pressing time preselection with automatic opening, feeding height 300 mm. The machine is on display in our showroom and available for immediate delivery. Location: ex stock 54634 Bitburg - immediately available -