Kūno presas

Gannomat Concept 70 ECO

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, „Gannomat Concept 70 Eco“ korpuso presas Pagaminimo metai: 2026 Įskaitant šias papildomas funkcijas: - Greitojo režimo perkėlimo greitis, reguliuojamas iki 50 mm/s - Mašinos kojelės (darbinis aukštis 500 mm) „Concept Eco“ ir „Concept Primus“ yra idealios montavimo priemonės, skirtos sujungti detales kaiščiais, presuojant korpusus ir gaminant stalčių dėžes. Trumpas aprašymas: • Patikima tolerancijos kompensavimo sistema (GANNOMAT sistema) Laedpfx Amsvxgrre Reg • 2 potenciometrai, skirti bepakopiam presavimo jėgos reguliavimui • Mažiausia presavimo jėga: 300/500 daN (kg) „Concept Eco“ arba • Mažiausia presavimo jėga: 600/800 daN (kg) „Concept Primus“ • Didžiausia presavimo jėga: 2200 daN (kg) „Concept Eco“ arba • Didžiausia presavimo jėga: 3500 daN (kg) „Concept Primus“ • 3 presavimo ir perkėlimo greičiai: 5 / 10 / 25 mm/s (su tiksliu padėties nustatymu / lėtu judėjimu) • Laisvai reguliuojamas presavimo laikas su automatinio atidarymo funkcija • „Concept Eco“: paprastas valdymas naudojant 6 atskirus mygtukus, skirtus 8 judesio sekoms • „Concept Primus“: paprastas valdymas naudojant LCD ekraną Universalus naudojimo diapazonas: • Korpusai, pavyzdžiui, baldams ir spintoms • Kampiniai korpusai • Korpusai su išsikišančiu dangčiu • Stalčių dėžės, stalčiai • Kelių korpusų / stalčių dėžių presavimas Privalumai: • Patikima tolerancijos kompensavimo sistema (GANNOMAT sistema) • Elektromechaninis korpuso presas su dažniu valdomais reduktoriais • Nepriklausomos vertikalios ir horizontalios presavimo juostos • Ilgalaikis eksploatavimas dėl patikimų ir aukštos kokybės komponentų • Tvirti ir patvari konstrukcija • Erdvę taupantis dizainas • Korpuso presavimas = paprasta + greita + efektyvu + lankstu + tikslu + profesionalu • Paprastas valdymas per paprastą ir patogią valdymo panelę • Greita, nes presavimo juostos padėties nustatymo greitis iki 50 mm/s (papildoma funkcija) • Efektyvu dėl tikslaus skirtingų dydžių korpusų presavimo • Lankstu, nes galima reguliuoti tokius parametrus kaip presavimo jėga, presavimo laikas, perkėlimo greitis • Tikslu dėl kampų tikslaus suderinimo, presuojant baldų korpusus ir stalčių dėžes • Profesionalus korpusų ir stalčių dėžių gamybos procesas naudojant modernų korpuso presą

Gamybos metai: 2000, būklė: geras (naudotas), Barberan Laminating Line For all inquiries, please contact: 790800714 The line is in continuous operation. Maximum laminating width: 1300 mm Minimum thickness: 3 mm Maximum thickness: 40 mm Maximum element length: 2800 mm Minimum element length: approx. 600 mm Continuously adjustable speed from the brushing machine, maximum speed: 20 m/min. The line includes: - Tommassini automatic loader (not operational) - Top and bottom brushing machine - Pre-heating lamps for the top and bottom glue rollers - PVAC glue applicator - Additional top and bottom drying lamps - Steel calender line for pressing - Additionally, the line is equipped with a purchased corona treatment unit for the upper surface (functional) – allows for single-side laminating with PP films Ljdpeilqvrefx Am Roag

Būklė: naujas, Gamybos metai: 2026, Gannomat Concept 70 Eco Lamella Case Clamp with Rapid Traverse Technical data: Lamella case clamp from our showroom; Working range: width from 150 – 2,500 mm, height from 150 – 1,400 mm; depth 700 mm; - Upper lamella pressure beam with 6 elements, side lamella pressure beam with 5 elements - Lamella pressure beams with proven tolerance compensation for tightly pressed case joints - Counterpressure surfaces are continuous 40 mm thick, coated support plates - The pressing force of the pressure beams is continuously electronically adjustable via 2 potentiometers and set using a frequency inverter, ensuring absolutely wear-free torque transmission. - Pressing force for horizontal pressure beams, min. 500 daN (kg) up to max. 2,200 daN (kg), continuously adjustable Lsdpfjy Egz Sjx Am Roag - Pressing force for vertical pressure beams, min. 300 daN (kg) up to max. 2,200 daN (kg), continuously adjustable - Included option: Rapid traverse travel speed for quick positioning of the pressure beams, controlled by automatic workpiece detection using sensors in the pressure beams; pressing speed 5/10/25 mm/sec and rapid traverse travel speed 50 mm/sec; sensors can be deactivated for clamping special workpieces. - Jog mode for precise positioning of both pressure beams, e.g. for low pressing forces, drawers, and 45-degree cases. Easy operation via 6 separate push buttons, freely adjustable pressing time preselection with automatic opening, loading height 300 mm Machine is on display with us and can be delivered immediately. Location: ex stock 54634 Bitburg - immediately available -

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2026, Technical Data: Lamella carcass press from our showroom; Working range: width from 150 - 2,550 mm, height from 150 - 1,400 mm; depth from 150 - 700 mm; Variable pressing force adjustment of the side press beam: 300/700/1100/1400/1800/2200 dN(kg); Variable pressing force adjustment of the top press beam: 500/800/1200/1500/1900/2200 dN(kg); Lsdpfx Amsb Eln Ds Rjag Simple operation via 6 separate push buttons, freely adjustable pressing time preselection with automatic opening, loading height 300 mm. The machine is available in our showroom and can be delivered immediately. Location: ex-stock 54634 Bitburg

Gamybos metai: 2010, būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Gamintojas: CFS (GEA) Tipas: Compact 420 Pagaminimo metai: 2010 El. jungtys: 28 kW, 42 A, 400 V, 50 Hz Etiketavimo mašina: Gamintojas: CFS Tipas: TiroLabe TL-150 Lajdpertq I Eofx Am Rjg Pagaminimo metai: 2010 su dujiniu užpildymu įskaitant 4 formatų rinkinius Būklė: labai gera Nuotraukoje matomas metalo detektorius ir Espera konvejeris nėra šio pasiūlymo dalis. Tai atskiri įrenginiai.

Būklė: naujas, Gamybos metai: 2026, Gannomat Concept 70 Eco Lamella Carcase Clamp with Rapid Traverse Technical Data: Lamella carcase press from our showroom; Working range: width from 150 to 2,500 mm, height from 150 to 1,400 mm; depth 700 mm; - Upper lamella pressure beam with 6 elements, side lamella pressure beam with 5 elements - Lamella pressure beams with proven tolerance compensation for tightly pressed carcase joints - Counterpressure surfaces are 40 mm thick, coated continuous support plates - The pressing force of the pressure beams is continuously electronically controlled via 2 potentiometers and set by frequency inverter, thus the torque transmission is completely wear-free. - Pressing force for horizontal pressure beams: min. 500 daN (kg) up to stepless max. 2,200 daN (kg) - Pressing force for vertical pressure beams: min. 300 daN (kg) up to stepless max. 2,200 daN (kg) Lsdpeiidm Nofx Am Rsag - Including option: Rapid traverse speed for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors integrated into the beams; pressing speeds of 5/10/25 mm/sec and rapid traverse speed of 50 mm/sec; sensors can be deactivated for clamping special parts. - Inch mode for precise positioning of both pressure beams, e.g. for low pressing forces, drawers, and carcases at 45 degrees. Simple operation via 6 separate push-buttons, freely adjustable pressing time preselection with automatic opening, feeding height 300 mm. The machine is on display in our showroom and available for immediate delivery. Location: ex stock 54634 Bitburg - immediately available -

Būklė: labai geros būklės (naudotas), Gamybos metai: 2008, Machining center Manufacturer: Weeke Model: BHX 500 Year of manufacture: 2008 Working range X: 2,500 mm Working range Y: 1,300 mm Working range Z: 4 - 80 mm Number of routing units: 2 Number of drilling units: 2 Ljdpoh E Sghjfx Am Roag Vertical drilling spindles: 72 Horizontal drilling spindles X: 16 Horizontal drilling spindles Y: 4 Grooving saw: Swivels 90° X-axis speed: 130 m/min Y-axis speed: 80 m/min Z1-axis speed: 50 m/min Z2-axis speed: 27 m/min Spindle speed: 18,000 rpm Dismantled - available immediately

Būklė: naudotas, Gamybos metai: 2018, veikimo valandos: 10 347 h, bendras aukštis: 2 400 mm, bendras ilgis: 7 000 mm, bendras plotis: 2 400 mm, Spalva: pilka Svoris be apkrovos: 3 450 kg - Pagaminimo metai: 2018 - Dokumentacija: yra - CE ženklas: yra - CE sertifikatas: yra - Eksploatavimo valandos: 10 347 - Frezavimo velenų skaičius [vnt.]: 1 - Frezavimo velena 1: - Valdomų ašių skaičius [vnt.]: 5 - Mažesnisis veleno sukimosi greitis [aps./min.]: 600 - Didžiausiasis veleno sukimosi greitis [aps./min.]: 24 000 - Pagrindinio variklio galia [kW]: 8,5 - C ašis: yra - Frezavimo stalo tipas: balkinis - Įrankių laikiklis: HSK-F63 - Medžiagos tvirtinimo sistema: pneumatinė - Gręžimo įrankis: yra - Variklio galia [kW]: 2,64 - Horizontalios gręžimo velenos [vnt.]: 10 - Vertikalios gręžimo velenos [vnt.]: 24 - Pjovimo įrenginys: yra - Įrankių keitiklio padėtys [vnt.]: 25 - Sistema/programinė įranga: Xilog plus - Saugumo priemonė: buferis - Vakuuminis siurblys: yra - Skaičius [vnt.]: 1 - Gamintojas: Becker - Tipas: Picchio - Pagaminimo metai: 2018 - Pagrindinio variklio galia [kW]: 2,5 - Talpa [m³/val.]: 108 - Jungties skersmuo [mm]: 80 - Be alyvos: taip - CNC parinktys: lazeris vakuuminio siurblio padėčiai nustatyti, atliekų konvejeris, brūkšninių kodų skaitytuvas - Darbinis plotas X [mm]: 3110 - Darbinis plotas Y [mm]: 1320 - Darbinis plotas Z ašyje [mm]: 180 - Įtampa [V]: 400 - Srovės suvartojimas [A]: 47,2 - Saugiklis [A]: 63 Laedpfxjxtbgpo Am Rsg - Galia [kW]: 10,0 - Transportavimo matmenys: 7000 mm x 2400 mm x 2400 mm (ilgis x plotis x aukštis) - Transportavimo svoris [kg]: 3450 kg - Transportavimo pakuočių skaičius [vnt.]: 1 Finansinė informacija PVM: nurodyta kaina yra be PVM PVM / Diferencinis apmokestinimas: PVM galima atskaityti įmonėms Pristatymas ir mainai galimi bet kuriuo metu, visoms pramoninėms prekėms. Yorick Diebels

Būklė: naudotas, Gamybos metai: 2018, Startech CN MAIN FEATURES FLEXIBLE AND INDIVIDUALLY CONFIGURED PRODUCTION COMBINED WITH SPEED AND PRECISION DRILLING FROM ABOVE WITH REFERENCE TO THE TOP SIDE OF THE PANEL ALLOWS FOR ABSOLUTE PRECISE PROCESSING NUMERICAL CONTROL WITH 7" COLOUR SCREEN: SIMPLE AND INTUITIVE TECHNICAL DATA Startech CN AXES Max. workpiece dimensions X-Y-Z mm 3050 x 800 x 50 Min. workpiece dimensions X-Y-Z mm 300 x 90 x 10 Working area drilling/grooving mm 0 x 800 / 0 x 800 Stroke of X-axis mm 750 Max. traversing speed X-Y axes m/min 25 DRILLING UNIT Vertical spindles number 7 (4X-4Y, one shared) Horizontal spindles (along Y-axis) number 2 (1+1) Horizontal spindles (along X-axis) number 1 Fixed groove saw (direction) X Diameter of groove saw mm 100 Max. thickness of groove saw mm 5 Motor power kW (HP) 1.5 (2) Spindle speed rpm 3350 Groove saw speed rpm 4300 INSTALLATION Power supply V (Hz) 380 / 400 (50 / 60) Installed power KVA 4.5 Compressed air requirement bar 6 Compressed air consumption Nl/cycle 90 Extraction requirement m³/h 1200 Extraction air speed m/sec 20 Extraction connection diameter mm 120 GENERAL FEATURES Universal CNC drilling machine with a working table with fixed gantry and moving workpiece for performing the following operations: - Vertical drilling on the panel surface - Horizontal drilling on all four workpiece sides - Grooving with an integrated groove saw in the 'X' direction Self-supporting structure Machine base made of steel tubular construction to provide a large base for accommodating the working table. The structure rests on 3 self-levelling feet. The electrical control cabinet is integrated into the machine base. Central Bakelite support table 'Easy Motion': - an MDF sector for through drilling, automatically retractable for horizontal drilling - an infeed roller to facilitate panel loading - a rear roller track to ease panel sliding - left and right stops - a central alignment device with manual adjustment The left and right stops must be used to drill horizontally in the 'X' direction on the two opposite panel sides. Panel positioning along the X-axis is via vacuum suction cups. Aggregates carrier This is a gantry structure made from steel tube. The main working unit is installed on the gantry. F10L drilling unit includes: - 7 independent vertical spindles - drill shank D10 mm - spindle pitch 32 mm - 2 horizontal drilling heads, 1 in X direction with one drill bit, 1 double drilling head in Y direction (1 + 1, drill shank D10 mm) - Speed 3350 rpm - 1 integrated sawing unit in X (max. diameter 100 mm) - Saw blade speed 4300 rpm - Motor power 1.5 kW - pneumatic vertical travel per spindle 70 mm - pneumatic horizontal travel of the drilling unit Workpiece positioning and drive of the working unit A CNC-controlled vacuum cup clamps and positions the workpiece sequentially under the working unit during processing. Movement along the X and Y axes is on THK guides with motion transmission via reinforced toothed racks. Z-axis movement is pneumatic on ball-bushing guides with stop position adjustable via the unit's positioning. Working unit positioning uses advanced drive and technology. -CONTROL The control software is specifically designed for use Laedpfxevwbp Aj Am Rsg

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, Max. Ø 114 mm; Straight and bent round tubes; One grinding station; Grinding of straight and bent round tubes up to Ø114 mm with maximum flexibility. The ML100 tube grinding machine is the perfect choice for surface grinding and polishing of round, oval, and elliptical tubes. The ML planetary belt system enables belt grinding without rotating the tube, delivering the best possible results. The feed system safely transports the straight tubes into the grinding station, ensuring consistent and productive surface quality. ML100 Working capacity (Ø mm): 3 – 114 Number of stations: 1 Abrasive belt, dimensions (mm): (2x) 50x940 Abrasive belt speed (m/s): 3–22 Feed speed (m/s): 1–5 Abrasive belt motor (kW): 3 Wheel motor (kW): 1.5 Feed motor (kW): (2x) 0.12 Total power (kW): 5 Power consumption (A): 11 Dust extraction connection (Ø mm): 80 Dimensions (mm): 750x1000x1300 Ljdpfx Astzkgbsm Reag Weight (kg): 250