Briaunų klijavimo staklės

Felder MG560

Būklė: naudotas, Maximum cutting width: 310 mm Maximum cutting height: 125 mm Saw blade diameter: 500 mm Motor power: 5.5 kW SALVAMAC LEGEND 500 – The semi-automatic under-table crosscut saw ----- Maximum cutting range: 220x125 / 260x100 / 285x80 / 310x50 mm. When cutting stacked boards, max. height: 100 mm. The frame is entirely constructed from thick-walled, reinforced, fully painted steel. Solid floor mounting system with flanged steel feet for the mounting hole. Two-hand safety cutting control positioned ergonomically. Saw motor power: 5.5 kW. Adjustable cutting speed via pneumatic regulator. Maximum system for weight balance and durability. Shock-absorbing system. Independent pneumatic adjustments for adaptation to different processing types. Durable and easily replaceable saw blade guide bar. TCT circular saw blade, diameter 500 mm, Z=108. Pneumatic upper workpiece hold-down with electro-pneumatic control. Pressing system operates via innovative ball bearings with dual dust protection and automatic lubrication system. CE-compliant electrical system. CE-certified models must be equipped as standard with infeed and outfeed support tables/roller conveyors of at least 1 meter in length. Technical Specifications: ----- Maximum cutting cross section, mm: 220x125, 260x100, 285x80, 310x50 Saw blade motor power: 5.5 kW Saw blade diameter: 500 mm Saw blade type: TCT Z=108 Saw blade speed: 2800 rpm Air consumption per cycle: 5 Nl Extraction connections: 1 x 120 mm / 1 x 100 mm Air pressure: 6 - 8 bar Voltage: 400 V / 50 Hz, 3-phase Working table height: 900 mm ± 20 mm Color tone: RAL 7035 Machine additionally equipped with: ----- 2 m roller conveyor (right of saw) with non-driven rollers: Painted steel frame with galvanized rollers. Load capacity: 230 kg, diameter: 60 mm, spacing: 250 mm, width: 320 mm. Area between rollers enclosed with painted steel. Including side guide. 2 m roller conveyor (left of saw) with non-driven rollers: Painted steel frame with galvanized rollers. Load capacity: 230 kg, diameter: 60 mm, spacing: 250 mm, width: 320 mm. Area between rollers enclosed with painted steel. Including side guide, stop guide, and millimeter scale. Bdedpfx Ajv Uq Tlsfnsa 2 robust pneumatic stops, width 200 mm ----- Total price ex works: on request! ----- Pictures and video not original; show an identical model. Additional options (e.g., longer infeed/outfeed tables, stop systems) available on request! (Technical data according to manufacturer's information—subject to change!)

Būklė: naudotas, Holz Her CUT 6120 Heavy-duty precision high-performance panel saw Cutting length: 3900 mm Cutting depth: 3100 mm Saw blade projection: 82 mm Control system: CUTCONTROL 2, 17" TFT touchscreen Powerful optimization software: CD CUTTING-SYSTEM Label printer 3 air-cushion tables, 1800 x 600 mm Automatic angle pressure device, up to max. 1300 mm Automatic cut-out device Offcut device Remote cable control Pneumatic trimming stops Main saw unit: 11 kW, saw blade diameter 350 mm Scoring saw unit: 2.2 kW, saw blade diameter 180 mm Saw carriage feed: 0 - 100 m/min, stepless Saw carriage return: 130 m/min Rip fence feed: 0 - 100 m/min (EU 0-25 m/min) Rip fence return feed: 100 m/min Rip fence pneumatic clamps: 7 pcs. Compressed air supply: 6 bar Bdsdpfxeytrvio Afnoa Extraction connection main machine: 1 x 120 mm Extraction connection pressure beam: 3 x 120 mm Extraction capacity: 3500 m³/h Air velocity: 30 m/sec. Machine dimensions approx. 6000 x 6000 mm Weight approx. 5,000 kg Machine from retirement / craft business Machine is in TOP CONDITION Available immediately from location

Būklė: naudotas, Gamybos metai: 2014, Naudota mašina Pagaminimo metai: 2014 Įranga ir techniniai duomenys: - Darbinis plotas X: 3 740 mm - Darbinis plotas Y: 1 570 mm - Darbinis plotas Z: 350 mm - 4-a ašis: yra - 5-a ašis: 5 ašių verpstė, variklis 12 kW - Su papildomu C ašies užraktu - Įrankių keitimo vietos: 24 su lėkšteliniu keitikliu; 10 mašinos stovo kairėje pusėje - Vertikalios gręžimo verpstės: 12 - Mašinos stalas: konsolinis stalas - Stalo pozicionavimo automatas: yra - 6 ruošinio atramos tipo e-motion - Speciali ruošinio prispaudimo sistema rėmams - Programinė įranga: FORMAT 4 WOOD FLASH, TPA ALBATROS - 2 apdirbimo laukai svyruojančiam užkrovimui - Su automatine centrine tepimo sistema - Su mobiliu valdymo pultu su PC monitoriumi - Su valdymo spintos kondicionieriumi - Su vakuuminiu siurbliu 90 m³/h - Su rankiniu valdymo įrenginiu - Įskaičiuota: 12 rėmo spaustuvų, 8 dideli ir 4 vidutiniai siurbtukai Bjdpfsx Hllxsx Afneda Prieinamumas: greitas Vieta: Röllbach

Gamybos metai: 2025, būklė: naujas, Natūralios gumos membrana arba silikono membraninė lakštas 3D baldų fasadų gamybos srityje taip pat siūlome sprendimus presams, plėvelių pjaustymo staklėms, plėvelių stalčiams ir valymo įrenginiams! MEMBRANA membraniniams presams – iš silikono arba natūralios gumos Bdjdpfx Afji E Hp Tonea Aukščiausia kokybė, tinkama visų tipų membraniniams presams (plėvelės ir faneruotės presams). Mūsų membranas galite įsigyti pagal pageidaujamus išmatavimus arba kaip ruloninę produkciją. NATŪRALI GUMA Tipas: RM-2 Spalva: pilka Paviršius: lygus / lygus Standartiniai plotiai: 1700 ir 2000 mm Gumos tipas: natūrali guma Kietumas: apie 42°Shore Storis: 1,8 mm, 2,5 mm ir 4 mm Darbinė temperatūra: nuo -20°C iki +130°C

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2010, Įtampa 400V 3~ 50Hz 7,22kW Valdymo pultas su LCD ekranu ir mygtukais Klijavimo agregatas su 2 priešinga kryptimi besisukančiais deimantiniais frezais Kampų apvalinimo įrenginys išoriniams kraštams Rankinis agregatų reguliavimas Briaunos storis 0,4-5,0 mm (pasirenkamai 8 mm) Bsdpfx Afoyf I T Uonjda Rušinio aukštis 8-60 mm Padavimo greitis 11 m/min 3 laisvos vietos apdailos agregatams Briaunos padavimas ritininėms ir juosteliniams medžiagoms Nupjovimo peilis

Būklė: naujas, Pre-scoring unit, kW Dimensions (Length/Width/Height), mm Approx. machine weight, kg Masterwood MasterSaw Heavy-duty pressure beam saw with full equipment ----- Manufacturer's description: ----- The MasterSaw pressure beam saws come equipped with the following features: - Air-jetted cut line - Height-controlled pressure beam - Controlled saw blade projection - 3 or 4 air-cushion tables, center tables adjustable - Infeed and outfeed rollers at table ends - 15 kW main saw motor (MS 430 L: 18.5 kW) - Pre-scoring unit adjustable horizontally and vertically from operator panel Bodpfx Afsxmk Ebsnjda - Masterlock quick-change system for saw blade replacement - Saw carriage return travel 110 m/min, forward feed max. 95 m/min - Gripper return path max. 95 m/min - Machine weight 6 t or 6.8 t - 8 or 10 double-finger clamps standard - Double roller side aligner - Intuitive machine software with graphical operator guidance - Stress-free cutting - Post-cut option (nesting) - Front and rear cleanout flap ----- MasterSaw Series Features: MasterSaw 320 – Outstanding price-performance ratio ----- - Cutting length 3,200 mm - 3 air-cushion tables, center table adjustable - 6 t machine weight MasterSaw 430 – Industry standard for small to midsize workshops ----- - Cutting length 4,300 mm - 4 air-cushion tables, center tables adjustable - 6.8 t machine weight Detailed features MasterSaw 320/430: ----- - Saw unit with automatic adjustment of optimum saw blade projection - Pre-scoring saw unit with 200 mm blade for tear-free cuts at high feed rates - Saw unit driven by servo motor with rack-and-pinion drive - Pneumatic pressure beam always positioned parallel to working table via rack-and-pinion - Opening height of pressure beam monitored by intelligent controls for shortest cutting cycles - Double roller side aligner positions panel strips before and after the cutting line - Material pusher with 8 (MS 320) or 10 (MS 430) double-finger clamps Technical data MasterSaw 320/430: ----- - Max. panel size MS 320: 3,200 x 3,100 mm - Max. panel size MS 430: 4,300 x 4,300 mm - Saw blade diameter: 400 mm - Cutting thickness up to 90 mm - Saw motor power: 15 kW - Pre-scoring saw motor power: 1.5 kW - Feed speeds: up to 95 m/min in cutting mode, up to 110 m/min in return - Smallest finished workpiece: 34 x 45 mm - Weight: 6 t (MS 320) or 6.8 t (MS 430) - Dimensions MS 320: 5,556 x 6,646 x 1,890 mm (L x W x H) - Dimensions MS 430: 6,556 x 7,775 x 1,890 mm (L x W x H) - CE safety device ----- MasterSaw Series Features: MasterSaw 430 L – Lift table machine with 120 mm cutting height ----- The solution for high productivity The MasterSaw 430 L features rear-side lift table loading. With its 120 mm cutting height, it is ideal for series production. Equipment and technical data MasterSa...

Gamybos metai: 2017, būklė: naudotas, Used machine Year of manufacture: 2017 The TSRET04 return system from Barbaric is a workpiece return conveyor for edge banding machines. It is the most basic version in the TSRET series and performs the following functions: - Transfers the workpiece at the end of the edge banding machine. Bdsdpfx Aex Rpgbofnoa - Returns the workpiece to the height of the edge banding machine’s infeed. Functionality: After passing through the edge banding machine, the workpiece arrives on a roller table. Transfer is achieved by belt conveyors running perpendicular to the conveying direction, which rise from the roller table, lift the workpiece, move it sideways, and set it down on a slightly lower roller table. This roller table transports the workpiece to a belt conveyor. At the end of the belt conveyor, a non-driven roller track, inclined slightly towards the infeed of the edge banding machine, is connected. A stop at the end of the roller track halts the workpiece. Technical data: - Max. load capacity: 60 kg - Max. panel size: 2,800 x 1,300 mm - Cycle time: up to 11 parts/min Dimensions: - Return: 2,293 x 1,961 mm - Conveyor belt: L 2,500 mm x W 800 mm - Roller track: L 2,000 mm x W 800 mm - Total length: approx. 6,943 mm - Total width: approx. 2,239 mm Availability: short-term Location: Flörsheim

Būklė: naudotas, Gamybos metai: 2017, maks. pjovimo plotis: 4200 mm maks. pjovimo aukštis: 2200 mm pjūklo disko skersmuo: 250 mm maks. apdirbimo storis: 60 mm pjūklo disko skylė: 30 mm apatinis pagrindas: plastikiniai padėklai medžiagos padėjimas: įtraukiamos plastikinės juostos matuoklis: skalė pjūklagalvio pasukimas: rankinis Bsdpfx Afexg Igionjda pjūklo padavimas: rankinis tvirtinimas: pastatomas laisvai nusiurbimas: išorinis pjūklo balkio fiksavimas: rankinis svoris apie: 1000 kg matmenys: 5600 x 1700 x 3000 mm variklio galia: 4,2 kW Sandėlio vieta: Nattheim

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2019, pjovimo ilgis (maks.): 4 300 mm, pjovimo gylis: 4 300 mm, Šis MAYER Otto Meyer PS80P tipas pagamintas 2019 m. Tvirtas plokščių pjūklas, kurio pjovimo ilgis ir plotis yra po 4300 mm, varomas 9 kW pagrindinio variklio. Funkcijos: optimizuotas važiavimo greitis naudojant papildomą dažnio keitiklį ir automatinis elektroninis plokščių kampų prispaudimo aptikimas. Apsvarstykite galimybę įsigyti šį MAYER Otto Meyer PS80P tipo plokščių pjūklą. Susisiekite su mumis dėl daugiau informacijos. • Pagrindinio variklio galia: 9 kW • Optimizuotas pagrindinio pjūklo važiavimo greitis naudojant papildomą dažnio keitiklį • Automatinis elektroninis prispaudimo aptikimas, skirtas plokščių kampams aptikti • Pastaba: Techniniai duomenys ir aprašymai yra tuo metu galiojančio užsakymo patvirtinimo kopijos. Duomenys yra tik informacinio pobūdžio ir nėra privalomi. Bdjdpjygw Auofx Afnsa Papildoma įranga • Etikečių spausdintuvas

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2014, Feed speed X-axis: 9 m/min Overall length: 3,200 mm Maximum workpiece height: 45 mm Maximum edge thickness: 3 mm Type of height adjustment: mechanical Input voltage: 400 V Material removal: 2 mm Technical data Year of manufacture: 2014 Edge thickness: 0.4–3.0 mm Motor voltage: 3x 400 V Motor frequency: 50 Hz Min. workpiece length: 210 mm Min. workpiece width: 70 mm Workpiece height: 8–45 mm Chain feed: 9 m/min Cross-cut saw unit: Yes Radius scraper unit: Yes Flat scraper: Yes CE version Jointing unit for up to 2 mm material removal Automatic feeding for roll materials Manual feeding for strip materials Guillotine for hard PVC/ABS up to 3 mm thickness Glue application via glue roller Cross-cut saw unit, 12,000 rpm, 0.27 kW 2 carbide saw blades D-100 mm Z24 Multifunctional milling unit with 2 HF motors, 0.35 kW for radius, flush, and chamfer milling for thin edges Bsdpfx Aewat Aljfnjda Extraction connections: 2x80, 1x120 mm Max. connected load: 7.5 kW at 3x400V / 50Hz