Fasavimo ir paletavimo linija

F.lli Sacchi Linea insacco e pallettizzazione “Smart

The system consists of:
 Decking structure on which the vibrated base for supporting the bin is positioned; this deck is protected by perimeter railings and accessed via a ship-type ladder;
 Empty bag hopper; loading of empty bags is carried out manually by the operator. The exact position of the bags is determined by adjustable side guides; a sensor positioned under the stack of bags signals when the stack is depleted;
 Also installed on the empty bag magazine structure are pneumatic cylinders for gripping the bag, opening the mouth, and inserting it onto the product dosing spout. Bag gripping is performed by a series of suction cups. The pneumatic control panel QP1 is also situated on the frame of the magazine.
 The dosing spout is supported by three load cells; at the discharge, there is a clamshell discharge gate operated by two pneumatic cylinders. Alongside are two additional cylinders with hooks at the ends for tensioning the bag mouth.
 Bag clamping on the longer side is performed by two jaws which lock the bag after filling and guide it to the sewing machine. Movement is achieved using gearmotor groups and wheels sliding on chromed shafts. During this phase, the bag rests on a powered conveyor belt for transferring; this belt is also raised by a pneumatic cylinder to allow the bag to settle gently upon filling completion. The belt height can be manually adjusted via a handwheel acting on four jacks to accommodate different bag types.
 After inserting the bag into the sewing machine, stitching and thread cutting take place; still on the conveyor, the bag arrives at the turning station, where it is clamped by two jaws, rotated 90°, and released so that it is parallel to the belt.
 The next conveyor features, in its initial section, a series of square rollers to straighten the bag and subsequently a belt for conveying;
 Finally, there is a roller conveyor where the bag is picked up by the robot; this belt stops via a photocell when the bag reaches the end of the roller conveyor;
 The robot gripper is a comb-type and is equipped with a transfer cylinder for discharging the bag and two cylinders that operate a plate to hold the bag during handling prior to discharge.
 Two boxes containing solenoid valves and vacuum units are installed on the system;
 The entire system is controlled by an electrical panel; this is equipped with an operator panel and weighing module;
Blodpexrcc Aofx Abljp
 The robot is managed by its own dedicated control panel with operator interface.

Skelbimas verčiamas automatiškai, todėl jame gali būtų vertimo klaidų.