Įpurškimo liejimo mašina

ENGEL VC 330/180 tech – Duroplast

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2018, veikimo valandos: 17 000 h, spaudimo jėga: 220 kN, varžto skersmuo: 50 mm, Year: 2018 Control type: CC300 Operating hours: 17,000 h Storage location: MECA PLASTIC Availability: IMMEDIATE Gtedovtm Uijpfx Aczjt Clamping force: 220 T Opening stroke: 530 mm Tie bar spacing: 620 mm x 620 mm Platen dimensions: 900 mm x 900 mm Min./max. mould height: 250 / 600 mm Max. distance between platens: 1,220 mm Screw diameter: 50 mm Screw L/D ratio: 20D Volume: 432 cm³ Injection pressure: 2,002 bar Motor power: 29 kW Heating power: 15.3 kW Clamping unit weight: 11.3 T Length: 6.30 m Width: 1.80 m Height: 2.10 m Core pull: NO Robot interface: YES Bi-metallic screw: YES

Sąlyga: naudotas, Gamybos metai: 1991, Pressure: 650 t Clear width: 920 mm Stroke: 1750 mm Approx. machine weight: approx. 47 t Table size: 2000 x 1500 mm Ram size: 2000 x 1500 mm Installation height: 2100 mm Hydraulics: 203 bar Closing speed: 500 mm/min Pressing speed: 0.5 - 10.4 mm/sec Opening speed: 250 mm/sec Gtsdpfx Asfhmuveczot Release speed: 0.5 - 66.4 mm/sec Return force: 150 t Total power requirement: 75 kW Space requirement approx.: 4.4 x 2.5 x 7.5 m

Sąlyga: naudotas, Gamybos metai: 2019, Year: 2017 Control type: CC300 Operating hours: 20,000 h Storage location: MECA PLASTIC Availability: AVAILABLE Clamping force: 160 t Opening stroke: 460 mm Tie bar spacing: 520 mm x 520 mm Gjdpsv I Uw Iofx Aczjtt Platen dimensions: 760 mm x 760 mm Minimum/maximum mould height: 250/600 mm Maximum daylight between platens: 1,060 mm Screw diameter: 35 mm Screw length: 20D Shot volume: 154 cm³ Injection pressure: 2,000 bar Motor power: 21 kW Heating power: 9.2 kW Clamping unit weight: 8.4 t Overall length: 5.90 m Overall width: 1.70 m Overall height: 2.20 m Core pull: NO Robot interface: YES Bimetallic screw: YES

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2017, Machine: ENGEL VICTORY 500T / 7050 (Year of manufacture: 2017) Year of manufacture: 2017 Control unit: CC300 Operating hours: 565 h Availability: Immediate Clamping Unit: Clamping force: 500 tons Opening stroke: 1100 mm Gtodpoxvingsfx Aczot Tie bar spacing: 1500 × 1285 mm Platen size: 1500 × 1285 mm Minimum mould height: 500 mm Maximum daylight (open gap): 1600 mm Injection Unit: Screw diameter: 120 mm Screw length (L/D): 22 D Shot volume: 5430 cm³ Maximum injection pressure: 1600 bar General Data: Motor power: 98 kW Heating capacity: 30 kW Clamping unit weight: 31 tons Injection unit weight: 15 tons Machine dimensions (L × W × H): 10.50 m × 2.30 m × 2.30 m Options: Core pulls: 3 Robot interface: No Bi-metallic screw/cylinder: Yes Additional equipment: STAUBLI magnetic platens, 24 hot runner heating zones Note: The machine has very low operating hours (565 h) and is part of the modern tie-bar-less ENGEL Victory series, ideal for large moulds and high-precision production.

Sąlyga: naujas, Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 61036721, spaudimo jėga: 6 500 kN, varžto skersmuo: 70 mm, tarpas tarp stulpų: 1 110 mm, darbinio tūrio: 1 078 cm³, įpurškimo slėgis: 1 877 juosta, injekcijos svoris: 981 g, atvērimo eiga: 3 200 mm, plokštės aukštis: 1 540 mm, pavaros tipas: Hydraulisch, laisvas tarpatramis: 3 200 mm, įrankio svoris: 2 200 000 g, Injection Moulding Machines Directly from the Manufacturer! As the manufacturer KraussMaffei, we offer you here our inspected and flexible stock machines: The hydromechanical two-platen clamping unit of the GXW machine sets new standards in terms of quality and productivity. The sophisticated GuideX sliding shoe perfectly absorbs forces and extends the lifetime of the moulds. The innovative GearX locking system engages immediately and reliably. Powerful, user-friendly and highly stable in value. TECHNICAL DATA: KM 650 / 2000 / 2000 GXW G06 (Order 38618339) CONTROL SYSTEM - MC 6 with 24” TFT colour display with multitouch functionality CLAMPING UNIT - Clamping force kN 6500 - Max. mould open force kN 455 - Tie bar spacing (h x v) mm 1110 x 960 - Platen size (h x v) mm 1540 x 1440 - Mould installation height min.-max. mm 1550 (without center platen) - Daylight mm 3200 - Max. opening stroke mm 1650 - Max. mould weight kg 22000 INJECTION UNIT 1 SP2000 - Screw diameter/type mm 60 / Thermoplastic - Effective L/D ratio 23.3 - Injection pressure bar 2420 - Shot volume cm³ 792 - Shot weight max. stroke PS g 720 - Injection speed mm/s 140 - Injection flow rate cm³/s 396 - Screw drive speed 1/min 285 - Plasticising rate g/s 72.2 - Nozzle contact force kN 82 INJECTION UNIT 2 SP2000 - Screw diameter/type mm 70 / Thermoplastic - Effective L/D ratio 20 - Injection pressure bar 1877 - Shot volume cm³ 1078 - Shot weight max. stroke PS g 981 - Injection speed mm/s 140 - Injection flow rate cm³/s 539 - Screw drive speed 1/min 285 - Plasticising rate g/s 98.3 - Nozzle contact force kN 82 ELECTRICAL SPECIFICATIONS - Connected load kW 341 - Power supply V / Hz 400 / 50 3 phases with neutral conductor WEIGHT AND DIMENSIONS - Net weight t 43.5 - Length x width x height m 11.89 x 3.22 x 2.77 ADDITIONAL EQUIPMENT - Wear-resistant plasticising unit - BluePower full insulation for plasticising cylinder - Open nozzle - BluePower ServoDrive - Pneumatic valve 1-fold (BWAP), 1-fold (FWAP) - Pneumatic cascade valves 6-fold (BWAP), 6-fold (FWAP) - Hydraulic core pull 2-fold (BWAP), 2-fold (FWAP) - Mould heating 96-fold (3.5 kW) - Euromap interface for handling E18 - Euromap interface (central computer) E67, E77, E78, E63, E82.1 - Adaptive Process Control (APC+) - Graphic analysis package - Sliding table with turning unit, servo-driven - Vertical center platen Gtsdow U N Ixopfx Aczjt - Parallel clamping and opening movement during injection process with platen parallelism control between FWAP and center platen or BWAP and center platen - ColorForm interface—signal interface for connecting an RPM system - Electrical interface for HRS Flexflow system - Electrical interface and hydraulic valves for "1-K dummy operation" - Interface for connecting a CoMo-Kistler Injection Basic System with good/reject part separation The machine is located at our factory in Parsdorf and is available at short notice. Additional options available upon request. We look forward to your enquiry.

Sąlyga: paruoštas naudoti (naudotas), Parduodama sugedusi vertikali CNC apdirbimo stotis DMG Mori. Važiavimo eiga X/Y/Z: 835mm/510mm/510mm, įrankių vietų: 20, įrankio tvirtinimas: SK40, apsisukimų dažnis: 10 000 aps./min, stalo matmenys X/Y: 1000mm/560mm, T formos griovelių atstumas: 100mm, didžiausia stalo apkrova: 800kg, stalo aukštis: 720mm. Valdymas: Heidenhain TNC 530, darbo valandos: apie 29 836h. Gali būti sugedęs pneumatiniø atleidimo cilindras arba velenas. Dokumentacija prieinama. Galima apžiūra vietoje. Gsdpfx Ajx Ivkzoczstt

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2011, Krauss Maffei KM 850-12000 MX Injection Moulding Machine Year of manufacture: 2011 LRX 500 Robot Z-axis: 4000 mm X-axis: 1500 mm Y-axis: 1250/1250 mm Hydraulic-mechanical two-platen clamping system with 4 pressure pads and 4 locking units on the moving platen. PV - injection unit regulation. MC 5 control system with colour monitor, integrated operator panel, and USB data carrier. Plasticising unit: Complete plasticising unit for thermoplastics with a 135 mm screw diameter, non-return valve and open nozzle. Nozzle radius: 25 mm, nozzle opening: 9 mm TECHNICAL DATA Clamping unit: - Clamping force: kN 8500 - Mold opening force: kN 560 - Platen dimensions (H x V): mm 1600 x 1600 - Tie bar clearance (H x V): mm 1140 x 1140 - Mold opening stroke: mm 1600 - Mold height (min–max): mm 500 - 1100 - Daylight: mm 2100 Gjdpfx Acewqdyiezstt - Ejector stroke: mm 300 - Ejector force: kN 200 / 100 Injection unit: - Screw diameter: mm 135 - Injection pressure: bar 1389 - Shot volume: cm³ 8588 - Shot weight for PS: g 6098 - Injection rate: cm³/s 1414 Electro-hydraulic equipment: - Rated pump motor power: kW 132 - Dry cycle time according to Euromap 6: 1/h 965 - Oil tank capacity: l 2440 Weights and dimensions: - Net weight with control cabinet: t 49 - Installation space (L x W x H): m 11.72 x 2.92 x 2.71

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2020, Liejamasis blokas Šūvio svoris: 172 g Sraigto skersmuo: 70 mm Gedpfx Asx Nkp Ijczjtt Spaudimo blokas Spaudimo jėga: 2200 kN Ši Arburg 570 S 2200-800/290 pagaminta 2020 metais. Įrengta hidrauline pavara ir Selogica valdymo sistema, užtikrinančia precizišką darbą. 2 200 kN spaudimo jėga ir 40 mm sraigto skersmuo užtikrina tinkamumą detalėms liejimo užduotims. Pasinaudokite proga įsigyti šią hidraulinę Arburg 570 S 2200-800/290 liejimo mašiną. Susisiekite dėl papildomos informacijos. Pritaikymo sritys Liejamasis formavimas

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2005, veikimo valandos: 58 350 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 3 000 kN, varžto skersmuo: 60 mm, Clamping Unit: Clamping Force: 3,000 kN Maximum Mold Opening Force: 160 kN Moving Platen Opening Force: 86 kN Moving Platen Closing Force: 68 kN Mounting Plate (H x V): 995 x 1050 mm Clear Distance (H x V): 630 x 630 mm Mold Opening Stroke: 820 mm Minimum Mold Installation Height: 330 mm Maximum Daylight Opening: 1,150 mm Ejector Stroke: 200 mm Ejector Force Forward/Backward: 58 kN Injection Unit: Screw Diameter: 60 mm L/D Ratio: 21 Injection Pressure: 2,000 bar Shot Volume: 679 cm³ Shot Weight (PS): 618 g Injection Flow Rate: 325 cm³/s Screw Speed: 259 rpm Gtsdpew H Rvisfx Aczet Plasticizing Throughput: 58 g/s Nozzle Contact Force: 110 kN Electrohydraulic Equipment: Pump Motor Power: 45 kW Installed Heating Capacity: 23 kW Cylinder Heating Control Zones: 6 Oil Fill Volume: 720 l Dimensions and Weight: Space Requirement (approx.): 6.20 x 2.20 x 2.40 m Total Weight: 14,370 kg Maximum Mold Weight: 3,430 kg Accessories: - Oscillation mountings - 8-circuit water manifold Additional Equipment: - 1 x air valve - 2 x core pulls - 8 x hot runner controllers - Robot interface according to Euromap 12

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2017, The device was ordered but was not integrated into the production line, meaning it has never run in series. The system was designed to feed a small cap for a sensor clip. Lanco Integrated Linear feeder at the discharge: Type LF28 / 4.5-5.5 kg Vibratory feeder VZ: VZ 500 Z-L (vibratory bowl) Control unit SV2-2-8z (OKU ID No.: 14420) Gtjdpov Uqm Sofx Aczjt Documentation available in paper form Original purchase price was €20,000