Įpurškimo liejimo mašina

ENGEL ES 16050-800 DUO

Sąlyga: naudotas, Payload: 0/16 kg Reichweite: 1.500 mm Anzahl Achsen: 6 Wiederholgenauigkeit: 0,03 mm Robotergewicht: 0 kg Montage: Boden Bjdpfx Asihgpvjdmodk

Sąlyga: naudotas, CNC Gantry Drilling and Milling Machine ANAYAK Type HVM-3800-P Bed-type milling machine, designed similarly to a plate-type boring mill with fixed table Machine No.: M-20021203 Year of manufacture: 2002 “Refurbished 2025” The machine will be fully refurbished in 2025 and can then be inspected at the warehouse in 37235 Hessisch Lichtenau. Travel distances X: 3200 mm, Y: 1200 mm, Z: 1500 mm Table size 3800 x 1200 mm T-slots 8 slots, 22 mm width, spacing 130 mm Table load capacity max. 25 tons (fixed table – virtually unlimited load capacity) Spindle taper ISO 50 (DIN69871-A) (drawbar DIN 69872-B) Spindle speed 60–4000 rpm, stepless Feed rate up to 10,000 mm/min, stepless Rapid traverse X + Y 20 m/min Rapid traverse Z 10 m/min Spindle drive 22 / 30 kW Power supply 400 Volt, 50 Hz, 50 kVA - 30-station automatic tool changer Bdedpfxoxcgtgo Admok - Spindle drive with 2 speed ranges - With automatic tool changer and tool magazine - Orthogonal milling head with hydro-mechanical tool clamping - Orthogonal milling head, fully automatic swiveling in two 45° planes – B + C axis - HEIDENHAIN iTNC 530 CNC control, with electronic handwheel - Pre-equipped for wireless touch probe (probe and receiver not included) - Additional HF spindle, 18,000 rpm – for attachment - Free-standing control cabinet - Chip conveyor installed between gantry bed and machine table - 32,078 operating hours displayed - Coolant system - Free-standing hydraulic unit - Operating manual with circuit diagrams Machine installation footprint: L x W approx. 1000 x 700 cm Machine height: approx. 410 cm Weight (complete) approx. 33 tons Good condition

Sąlyga: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, bendras svoris: 44 000 kg, rotoriaus ilgis: 2 800 mm, galia: 315 kW (428,28 AG), sukimosi greitis (maks.): 87 aps./min, - MERAK 2800-2 with 315 kW - 116PR cutting system - PG190 screen (can be customized upon customer request) - Feed hopper - Dust suppression - Central electric lubrication system - Hydraulic safety protection Bjdpsugf Dwefx Admodk - Overband Neodymium Magnet Separator – HP - Rubber-coated, bolted track plates on crawler undercarriage

Sąlyga: beveik kaip naujas (naudotas), 1500 m² Schäfer R3000 Mezzanine, 3-Storey Used, excellent condition, like new – see photos Ground floor: steel-constructed mezzanine; two additional levels: Schäfer shelving system Manufacturer: SCHÄFER R3000 CAD design and assembly 3-storey construction Bdsdpshzw Hiofx Admjk Partial sale possible Price: on request! Item is in stock. Transport and installation available on request. Inspection possible at any time by appointment. Further information available upon request. Constantly over 5,000 linear meters of pallet racking from various manufacturers in stock. (Subject to changes, errors in technical data, details and prices as well as prior sale! See our T&Cs, all prices excl. VAT ex works) Purchase / Sale We are constantly looking for or offering a wide range of items from various sectors. - Swept-clean business clearances - Liquidations - Fast – flexible – efficient! We also clear and/or dispose for insolvency administrators. Contact us with a few keywords and we will get back to you promptly. To visit our website, please click on our logo!

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2006, Krauss Maffei Injection Moulding Machine KM 800 – 12000 MX Year of manufacture: 2006 Clamping Unit: - Clamping force: 8,000 kN - Mold opening force: 560 kN - Platen dimensions (H x V): 1,600 x 1,530 mm - Tie bar clearance (H x V): 1,120 x 1,000 mm - Maximum mold opening stroke: 1,600 mm - Mold height (min - max): 500–1,100 mm - Max platen stroke: 2,100 mm - Ejector stroke: 300 mm - Ejector force: 200/100 kN Injection Unit: - Screw diameter: 135 mm - Injection pressure: 1,389 bar - Injection volume: 8,588 cm³ Bsdpstmq Akefx Admjdk - Shot weight for PS: 6,098 g - Screw speed, standard/option: 121/153 rpm - Injection output (standard) Electrical & Hydraulic Equipment: - Pump motor power: 110 kW - Installed heater capacity: 57 kW - Number of barrel heating zones: 7 - Dry cycle time (Euromap): 965 cycles/h - Hydraulic oil tank capacity: 1,500 l Dimensions & Weight: - Net weight with control cabinet: 45 t - Machine dimensions (L x W x H): 10.81 x 2.92 x 2.51 m

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2001, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 930088, Country of Manufacture: CH Voltage: 400V / 50/60Hz / 3ph. Net Weight (machine + cabinet): 3250 kg + 400 kg Bdedpfx Adsw Ucyuemjk Customs Tariff Number: 8456.30 20 Dimensions: 260x281x225 cm TECHNICAL SPECIFICATIONS Machining Type: immersion Maximum workpiece dimensions: 1200x700x400 mm Maximum workpiece weight: 1500 kg Table size: 900x600 mm Floor to table distance: 900 mm Total dielectric volume: 1200 L X, Y, Z, U, and V axes X, Y, Z travels: 550 x 350 x 400 mm U, V travels: 550 x 350 mm Anti-collision protection: X, Y, U, V, Z axes Taper machining, max. cone: +/- 30° / 400 mm Available wire diameters: Ø 0.25 mm (option 0.1/0.2/0.3 mm) Wire guide type: closed diamond, gapless Available spool weight and type (DIN standard): 1.6 kg (K 100) to 8 kg (K 160) Available spool weight and type (JIS standard): 3 kg (P3) to 5 kg (P5) Dielectric Paper filters: 2 cartridges Dielectric temperature: +/- 1°C Total deionization resin volume: 20 L Maximum injection pressure: 20 bar Generator: double Isopulse source Power supply: 380/400V 3-phase Total power: 10 KVA Maximum cutting speed: 400 mm²/min Minimum surface roughness: 0.20 micron Ra Measuring system: glass linear scales Measuring resolution: 0.5 micron Servomotors: AC type All technical data provided without liability for errors or omissions.

Gamybos metai: 2010, Sąlyga: labai geros būklės (naudotas), Krauss Maffei KM 180 – 750 AX Injection Molding Machine Fully electric machine Year of manufacture: 2010 Control System: MC5 with color monitor, integrated control panel, and built-in disk drive station. Plasticizing Unit Complete plasticizing unit for thermoplastics with a screw diameter of 50 mm TECHNICAL DATA Clamping Unit - Clamping force: 1760 kN - Tie-bar platen dimensions (h x v): 790 x 740 mm - Distance between tie-bars (h x v): 560 x 510 mm - Maximum mold opening stroke: 450 mm - Minimum/maximum mold installation height: 200/600 mm - Platen opening stroke: 1050 mm - Ejector stroke: 130 mm - Ejector force: 49 kN Injection Unit - Screw diameter: 50 mm Bedpfjn Atndex Admodk - L/D ratio: 20.2 - Injection pressure: 1892 bar - Injection volume: 393 cm³ - Shot weight for PS: 357 g - Injection rate: 314 cm³/s - Maximum screw speed: 320 rpm - Nozzle contact force: 29.4 kN Electrical Data - Connected load: 38 kW - Heater capacity: 15.6 kW - Number of cylinder heating zones: 5 - Dry cycle time according to Euromap 6: 2000 cycles/h - Dry cycle time according to Euromap 6: 1.8 s Weight and Dimensions - Net weight with control cabinet: 6.5 t - Machine dimensions (L x W x H): 6.07 x 1.92 x 2.01 m

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2006, veikimo valandos: 32 000 h, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 800 mm, Y ašies eiga: 800 mm, Z ašies eigos atstumas: 800 mm, greitas poslinkis X ašimi: 60 m/min, greitas poslinkis Y ašis: 60 m/min, greitasis eiga Z ašyje: 60 m/min, X ašies padavimo greitis: 15 m/min, Y ašies padavimo greitis: 15 m/min, padavimo greitis Z ašis: 15 m/min, sukimo momentas: 121 Nm, valdiklių gamintojas: Siemens, stalo plotis: 700 mm, stalo ilgis: 900 mm, stalo apkrova: 1 400 kg, sukimosi greitis (min.): 20 aps./min, sukimosi greitis (maks.): 18 000 aps./min, veleno greitis (maks.): 18 000 aps./min, veleno veikimo valandos: 32 000 h, aušinimo skysčio tiekimas: 40 juosta, veleno nosis: HSK63A, įrankių magazino lizdų skaičius: 30, įrankio ilgis: 350 mm, įrankio skersmuo: 100 mm, Įranga: dokumentacija / vadovas, drožlių transporteris, sūkių greitis be galo kintamas, DMG MORI DMU 80P duoBlock Year of manufacture: 2006 Operating hours: 62,000h Spindle hours: 31,000h Function-tested and cleaned Maintenance carried out as per manufacturer’s specifications Geometry within new machine tolerance Equipment: Bedpfx Adjw Ht Ibomjdk 5 axes Swivel head (controlled B-axis) Direct path measurement in X/Y/Z (glass scales) Chip conveyor Extraction unit NC rotary table Tool magazine with 30 positions Heidenhain probe BLUM laser Handwheel Rotating viewing window ICS 40 bar Chip flushing system Operating mode 4

Sąlyga: geras (naudotas), Gamybos metai: 2011, Krauss Maffei Injection Moulding Machine KM 850-12000 MX With Krauss Maffei Robot Year of manufacture: 2011 Hydraulic-mechanical two-platen clamping system with 4 pressure pads and 4 locking units on the moving platen. PV - Injection unit control. MC 5 control system with colour monitor, integrated control panel and USB data carrier. Plasticizing unit Complete plasticizing unit for thermoplastics with 135 mm screw diameter, shut-off valve, and open nozzle. Nozzle radius: 25 mm, nozzle opening: 9 mm TECHNICAL DATA Clamping unit - Clamping force: 8,500 kN - Opening force: 560 kN - Platen dimensions (H x V): 1,600 x 1,600 mm - Tie bar spacing (H x V): 1,140 x 1,140 mm - Maximum opening stroke: 1,600 mm - Mould height (min-max): 500 - 1,100 mm - Daylight: 2,100 mm - Ejector stroke: 300 mm - Ejector force: 200 / 100 kN Bdedpetrya Rofx Admek Injection unit - Screw diameter: 135 mm - Injection pressure: 1,389 bar - Injection volume: 8,588 cm³ - Injection weight for PS: 6,098 g - Injection rate: 1,414 cm³/s Electro-hydraulic equipment - Rated motor power: 132 kW - Dry cycle time per Euromap 6: 965 cycles/h - Oil tank capacity: 2,440 l Weight and dimensions - Net weight with control cabinet: 49 t - Footprint dimensions (L x W x H): 11.72 x 2.92 x 2.71 m.

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2021, ENGEL DUO 17060/2000 Injection Moulding Machine Year of manufacture: 2022 Integrated ENGEL Viper 60 – RC300 Robot TECHNICAL DATA: Injection Unit: Screw diameter: 135 mm Screw stroke: 610 mm Injection volume: 8,731 cm³ Shot weight (PS): 7,860 g Screw rotation speed: 125 rpm Screw torque: 14,000 Nm Max. screw torque (at reduced speed): 15,630 Nm Plasticising capacity (3-zone screw): 222.9 g/s Plasticising capacity (barrier screw): 279.2 g/s Injection performance: 1,904 cm³/s Regenerative injection pressure: 1,648 bar Max pressure: 2,000 bar Nozzle stroke: 1,100 mm Nozzle contact force: 210 kN Barrel L/D ratio: 25 Number of heating zones (including nozzle): 8 Bdjdpfx Adew Aw Taemjk Heating power: 88.5 kW Clamping Unit: Clamping force: 20,000 kN Minimum clamping force: 2,000 kN Opening force with cushion: 1,600 kN Opening stroke: 3,000 mm Max. platen distance: 3,800 mm Mould height: 800 – 1,800 mm Tie bar spacing (H x V): 2,000 x 1,600 mm Platen size (H x V): 2,700 x 2,430 mm Max. mould weight (moving/fixed): 2 x 41,330 kg Max. total mould weight: 62,000 kg Dry cycle stroke (Euromap 6): 1,400 mm Dry cycle time (Euromap 6): 5.5 s Ejector Unit: Ejector stroke: 400 mm Ejector force: 385 kN Drive and cooling: Installed main motors power: 265 kW Oil tank capacity: 1,600 l Max. oil cooling power (at 25°C): 43.2 kW Cooling water consumption (at 25°C): 6.3 m³/h ENGEL Viper 60 – RC300 Robot (2022): Z-axis stroke: 4,280 mm X-axis stroke: 1,800 mm Y-axis stroke: 2,600 mm Robot fully integrated with the machine – control via machine panel Machine in excellent technical condition – latest generation ENGEL DUO with very low operating hours. Suitable for demanding large-scale production (e.g. automotive, household appliances, technical parts). Machine is under power, test run possible. AVAILABLE IMMEDIATELY For further information, please contact us – we can provide additional photos, a working video, technical documentation, and arrange a convenient appointment for inspection.