Vielinė erozijos staklė (vielinė EDM)

CHARMILLES Robofil 440

Gamybos metai: 2005, būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 935089, - Water bath machine with automatic wire threading - Enclosed diamond wire guides for various wire diameters - Collision protection on all 5 axes (ICP) - Clamping accessories shown in the image are included in the scope of delivery TECHNICAL DETAILS Travel paths X / Y / Z: 550 / 350 / 400 mm Travel paths U/V axis: 550 / 350 mm Taper: max. +/- 30° at 400 mm height Workpiece dimensions: max. 1200 x 700 x 400 mm Opening width: 1020 mm (accessible from one side) Workpiece weight: max. 1,500 kg Surface finish: up to Ra 0.22 μm Cutting speed: up to 300 mm²/min Available wire diameters: 0.15 – 0.30 mm Control: Charmilles Millenium with Windows operating system (12" TFT touchscreen) MACHINE DETAILS Ncodpfx Acolru Rbepsr Dimensions (L x W x H): 2,600 x 2,810 x 2,240 mm Net weight: 3,300 kg Supply voltage: 400 V / 3-phase / 50/60 Hz Connected load: 10 kVA LAN connection: included, for network integration

Gamybos metai: 2000, būklė: paruoštas naudoti (naudotas), Travel range X/Y/Z: 600mm/410mm/520mm, table dimensions X/Y: 840mm/420mm, spindle speed: 6000rpm, spindle power: 8.5kW, tool holder: SK40, tool positions: 22, rapid traverse X/Y/Z: 36m/36m/20m/min. Machine dimensions X/Y/Z: approx. 2200mm/2300mm/2300mm, weight: approx. 2500kg, control: Heidenhain TNC 426. An on-site inspection is possible. Ncodpfx Ajv Uqb Nocper

Gamybos metai: 1993, būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: RH 241-1-50-30v, naudotas REIFENHÄUSER vienvijis ekstruderis sraigto dydis: skersmuo 50 mm x 30v įpjova šerpeto zona ir išdujinimo zona Tipas RH 241-1-50-30v su DC pavara 30,2 kW pagaminta 1993 m. įrengtas valdymo skydas Pilnai veikiantis Ncedpfx Acjpy Eygoper Šį (ir kitus) ekstruderius galite apžiūrėti mūsų sandėlyje Königswinter mieste Mašina gali būti įjungta ir demonstruojama tuščiąja eiga. Sraigė buvo ištraukta ir išvalyta.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2008, veikimo valandos: 1 120 h, Control system: Aristech (similar to FANUC) Ncedpsvvl Uaofx Acper Number of axes: 4 Table dimensions: 640 x 470 mm X travel: 425 mm Y travel: 300 mm Z travel: 250 mm Max. workpiece dimensions: 800 x 600 x 250 mm U axis Weight: approx. 3,000 kg Dimensions (LxWxH): 1860 x 2050 x 2100 mm The machine consists of the following units: 1. Wire EDM machine – main unit 2. Control cabinet 3. Water tank + pump 4. Water chiller 5. Transformer No. 1 6. Transformer No. 2 (power supply) Very little used. Still connected to power.

Būklė: naudotas, Grinding diameter 350 mm Grinding length 600 mm Centre height 175 mm Grinding wheel diameter 400 mm Grinding wheel width 50 mm Bore diameter 127 mm Workpiece spindle taper MK5 Workpiece spindle speed 20–400 rpm Workpiece headstock swivels 360° Grinding spindle head swivels 180° ± Grinding spindle speed 1500, 1700, 2200 rpm Stepwise infeed 0–9.99 mm/ø Continuous infeed 0–9.99 mm/ø Table swivel ±10° Longitudinal table travel 1100 mm Table feed rate 0.02–6 m/min Workpiece weight between centres 130 kg Max. workpiece weight (supported) 130 kg including setup Max. cross travel 270 mm Internal spindle holder 80 mm Tailstock quill mount MK 3 Quill stroke 30 mm Total power requirement 6.5 kW Machine weight approx. 3.05 t Space requirement approx. 4 x 2 m Reconditioned according to Kellenberger guidelines including new, modern, and future-proof control system. Photo shows a machine previously supplied with 1000 mm centres. -The operation via touch panel is extremely simple. -The symbols on the control panel are nearly identical to the original controls, so no retraining is required. -Diagnostic function with PLC fault display and digital I/O indication. -Dressing function can be extended or modified as per customer request. -Oriented spindle stop of the workpiece spindle available on request. -New maximum infeed amount 40 mm, can be further increased on request. -Digital display in 2 axes. X-axis resolution 0.5 µm Options: -Encoder with digital display in the workpiece headstock -Encoder with digital display in the grinding spindle headstock (height adjustment not possible with spindle) -New rigid internal grinding attachment, diameter 80 mm or 100 mm -Increase of centre height up to max. 225 mm -Speed control for the grinding spindle Njdpfouxft Eex Acpscr Included: -Operating tools -Clamping sleeve for chuck Additional accessories available on request. The machine features an electronically controlled infeed system on the X-axis with stepper motor drive. Hydraulic longitudinal and rapid table traverse. Versatile use in production for external cylindrical and internal grinding, or for external, face, and internal grinding in one single setup of workpieces. Possible options: -Semi-automatic dressing cycles for external and internal grinding -Automatic dressing compensation -Measurement control Currently, the machine does not comply with the basic safety and protection requirements as specified in BetrSichV 2015. The necessary minimum protection targets must be determined by means of a risk assessment in accordance with BetrSichV.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2017, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 350 mm, Y ašies eiga: 250 mm, Z ašies eigos atstumas: 250 mm, ruošinio svoris (maks.): 200 kg, bendras aukštis: 2 372 mm, bendras plotis: 1 731 mm, bendras ilgis: 1 000 mm, stalo plotis: 630 mm, plunksnos brūkšnys: 250 mm, stalo ilgis: 400 mm, ruošinio ilgis (maks.): 800 mm, ruošinio plotis (maks.): 500 mm, ruošinio aukštis (maks.): 265 mm, GF AgieCharmilles FORM 20 Pagaminimo metai: 2017 AC-FORM HMI valdymas Ėjimo eigos: X=350 mm, Y=250 mm, Z=250 mm Didžiausias ruošinio dydis: X=800 mm, Y=500 mm, Z=265 mm Didžiausias ruošinio svoris: 200 kg Didžiausias elektrodų svoris: 50 kg Atstumas nuo stalo iki spaustuvo: 230 - 480 mm ISPG generatorius – darbinė srovė 80 amperų Geriausias pasiekiamas paviršius Ra 0,1 µm Linearūs stiklo liniuotės su 0,05 µm matavimo raiška Ncedpfx Acjxf Dvqjpjr Įeina pneumatinis Erowa ITS 50 spaustuvas Įeina 4 vietų elektrodų keitiklis žurnale Mašinos svoris (neto): 2000 kg Mašinos matmenys (I x P x A): 1000 x 1731 x 2372 mm Mašina bus išvalyta, aptarnauta ir išbandyta po užsakymo gavimo. Pagal pageidavimą taip pat galime atlikti mašinos paleidimą.

Gamybos metai: 2001, būklė: labai geros būklės (naudotas), Single-screw extruder WEBER NE5 1-30:D with 2 co-extruders WEBER ZE30 Year of manufacture: 2001 Output: approx. 200 kg/h Screw diameter: 50 mm Application: PE, PP, or three-layer pipe production, or for pipe sheathing and application of stripes The line has been used for producing heating pipes Ncedpfxehy Tp Ds Acper Condition: Very good 2 units of WEBER ZE30 co-extruders Screw diameter: 30 mm The three-layer pipe line is my property Location: Sachal EXTRUSION MACHINES D-26345 Bockhorn/Grabstede, Germany

Būklė: labai geros būklės (naudotas), Gamybos metai: 2022, Tekinimo skersmuo 376 mm, tekinimo ilgis 760 mm, strypo pralaidumas 76 mm, Y ašis -/+ 52,5 mm, C ašis 0,001° abiejuose velenose, 12 pozicijų revolverinė galva, 22 kW variklis, pagrindinis velenas 4000 aps./min., pagalbinis velenas 4500 aps./min., 3 žandikaulių griebtuvai, drožlių transporteris, įrankių nustatymo įrenginys. Ncedpjyll Txefx Acpsr

Gamybos metai: 2024, būklė: naujas, oris- Extruder MINI ESE 20/25 D Technical Data Screw Diameter [mm]: 20 Screw Length [L/D]: 25 Screw Speed [rpm]: 20-200 rpm Screw Axial Pressure [bar]: 300 continuous load, 350 maximum Drive: Three-phase motor with frequency converter Drive Power [kW]: max. 2.5 Ncedpehx Elfjfx Acpor Reduction Gearbox with integrated thrust bearing Weight [kg]: approx. 160 Dimensions [L x W x H] [mm]: approx. 1050 x 600 x 1590 *) Electrical Connection Values: 3 / N / PE Supply Voltage [V]: 400 at 50 Hz Control Voltage [V]: 230 Temperature Control: Electric mica resistance heating bands Max. Processing Temperature [°C]: 300 Control Cabinet and Control Panel The electrical installation of the extruder is located in the machine base. The base contains all necessary switching, control, and display devices. The feed zone is water-cooled; the water connection must be provided by the customer. A chiller unit for cooling the water is not included in the offer. Extruder tooling is not included in the scope of supply.

Būklė: naudotas, Details on request Njdpfjdbmyzox Acpecr