Elektrinis CNC presas - 40 tonų

DURMA AD-ES 1240

Gamybos metai: 2024, Sąlyga: naujas, The DA-69T control system offers both 2D and 3D programming, including automatic calculation of bending sequences and collision detection. The complete 3D machine setup supports multiple tool stations and provides instant feedback on product feasibility and handling. DA-69T Features: • 3D and 2D graphical touchscreen programming • 3D visualization for simulation and production • 17-inch high-resolution TFT color display • Full Windows application suite • Compatible with Delem Modusys (modular scalability and adaptability) • USB and peripheral interface • Open system architecture • Sensor-based bending and correction interface • Profile-T3D offline software • Significant contribution to environmental protection – climate change and the greenhouse effect will thank us, as will future generations! • Fully electronic drive • Up to 30% higher productivity • Up to 50% energy savings through start-stop technology • Faster than hydraulic press brakes • Lower operating costs • Significantly reduced service and spare parts costs (the electric press brake is technically much simpler and almost maintenance-free) • No harmful oil • Quiet – efficient – independent of hydraulic oil – low-noise operation • Relaxed and stress-free bending • Full working area • Touchscreen operation Machine Dimensions: (L x W x H): 2,150 mm x 1,650 mm x 2,800 mm Technical Details: Bending length: 1,250 mm Clearance between uprights: 1,300 mm Press force: 400 kN (40 tons) Control: CNC ModEva 19T Backgauge controlled axes: X, R (Z optional) Stroke length: 200 mm Installation height: 440 mm Table width: 104 mm Table height: 1,000 mm Throat depth: 410 mm X-axis travel range: 650 mm X-axis traversing speed: 500 mm/s Approach speed (Y): 180 mm/s Bending speed (Y): 20 mm/s Operating speed (R): 350 mm/s R-axis travel range: 250 mm Nlsdpfsd Sak Sox Aduji Motor output: 7.5 kW Weight: approx. 4,500 kg Standard Equipment: Control: Cybelec ModEva 19T CNC-controlled crowning Top clamping system: Durma (European) Bottom clamping system: 60 mm holders Backgauge: AC servo motors with ball screw Option includes: Fiesseler safety system AKAS II M FPSC-B-C Control: Delem DA 69T CNC-controlled backgauge X, R, Z1, Z2 Hydraulic top tool clamping Durma (type Wila) Hydraulic bottom tool clamping Durma (type Wila) Hydraulic power pack for clamping D-Bend simulation software The machine can be viewed and demonstrated at any time by appointment at our demonstration center in Staufenberg. Further machines are available for demonstration at our Staufenberg site. Further information available on request.

Sąlyga: naudotas, Gamybos metai: 2017, Doosan Puma GT3100M, 2017 metai Gamybos metai: 2017 Valdymas: Fanuc 0i-TF Tekinimo skersmuo: [mm] 376 Tekinimo ilgis [mm] 1245 Pagrindinis velenas: Diržinis veleno pavara Maksimalus apsukų skaičius 2800 aps./min. Maksimali galia 22 kW Nlodpexggktjfx Aduei Maksimalus sukimo momentas 1124 Nm Strypo pralaidumas 102 mm 3-žandų griebtuvas, Schunk ROTA THW plus 315-104 12 padėčių revolverinė galvutė BMT65 revolverinė galvutė Poslinkis X/Z ašyse 260/1350 mm

Sąlyga: geras (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2011, Elektromechaninis lankstymo presas Nsdpfx Adoxbbw Dousli Lankstymo ilgis iki 1020 mm Tarpas tarp stulpų 932 mm Maks. presavimo jėga 360 kN Maks. eigos ilgis 120 mm Įgilinimas 150 mm Prižiūrėta TruServices (paskutinį kartą 2/2025) Svoris 2600 kg

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2014, veikimo valandos: 2 315 h, Funkcionalumas: visiškai funkcionalus, tekėjimo ilgis: 500 mm, sukimosi skersmuo virš skersinio stumduko: 400 mm, tekėjimo skersmuo: 320 mm, ašies variklio galia: 15 000 W, veleno greitis (min.): 35 aps./min, veleno greitis (maks.): 50 000 aps./min, veleno skylė: 75 mm, Z ašies eigos atstumas: 580 mm, greitas poslinkis X ašimi: 33 m/min, greitasis eiga Z ašyje: 33 m/min, bendras aukštis: 1 700 mm, bendras ilgis: 2 630 mm, įvorės išorinis skersmuo: 210 mm, bendras plotis: 1 700 mm, Strypo skersmuo (maks.): 66 mm, plunksnos brūkšnys: 500 mm, sūpynės skersmuo virš skersinio vežimo: 660 mm, veleno nosis: 6, bendras svoris: 4 500 kg, MAZAK QUICK TURN 200 Smart Operating Hours: Automatic Cycle: 2,330 hours Condition: Very good condition, regularly serviced and consistently maintained! Capacity & Working Area Max. swing diameter: Ø 660 mm Max. turning diameter: Ø 350 mm Max. bar diameter: Ø 66 mm Max. machining length: 520 mm Main Spindle Max. speed: 5,000 rpm Spindle nose: JIS A2-6 Rated power (40% duty cycle): 15 kW Max. torque: 233 Nm Turret Number of tool stations: 12 Tool cross-section: 25 mm (external), 40 mm (internal) Feed Axes Rapid traverse (X / Z): 30 / 33 m/min Travel (X / Z): 180 mm / 550 mm Tailstock Mount: Morse taper NC axis, pressure control via M-codes Nlodpfowzkzzjx Aduoi Dimensions & Weight Machine dimensions (L x W x H): 2,630 x 1,710 x 1,700 mm Weight: 4,500 kg (without chip conveyor and coolant) Chuck: Kitagawa BB208 with through-hole Chip Management Mayfran hinge belt chip conveyor Coolant pump 8 bar & chip flushing General Specification: SD MEMORY I/F (1P) + USB MEMORY I/F (1P) Mazak standard color NC-controlled tailstock Tailstock pressure adjustment Tailstock with fixed centre mounting Operator door with safety interlock Double foot switch Fully enclosed work area Work area illumination Global-standard safety features Complete coolant system Chuck status display Automatic Tool Eye 10.4" colour display EIA/ISO package LAN interface Standard tool set

Sąlyga: geras (naudotas), Gamybos metai: 2012, • Euromac MTX Flex 12 1500/22/2500 • A large selection of tooling included • Year of manufacture: 2012 • Multitool 6 • Multitool 10 • CE safety features • Table extensions for 4 meters • Vacuum system • X-axis 2500 mm with repositioning up to 10,000 mm • Y-axis 1500 mm MTX flex 12 • 3 Autoindex D stations - 360° programmable • 3 Fixed D stations • 6 Fixed B stations with ACTIVE Die System • Direct DRIVE system • Automatic repositioning of hydraulic sheet clamps • Standard 2 sheet clamps • Simple sheet loading system • Automatic lubrication for multitool and tools • Movable control console • Machine software: TPT (TOP PUNCH TOUCH) with 21.5-inch LED touchscreen • Table with brushes • Front folding table (L 850) Njdpfx Aewk Ntueduoli • External cooling system • UPS system: protects the console PC from power drops and guarantees up to 30 minutes of operation in case of power failure • Die holders: 2 x D, 1 x C, 2 x and 1 x adapter from B to A • Punch adapters: D/B, D/C, B/A • Operating instructions (paper and electronic) • Prepared for online service (internet connection required) • USB memory stick • Electrical preparation for loading and unloading system.

Sąlyga: naudotas, Gamybos metai: 2014, Swing diameter over bed: 508 mm Turning length: 724.5 mm Control: Hurco Ultimax Nsdpfx Asv T Np Ajdueli Swing diameter over cross slide: 336 mm Spindle speeds – stepless: 0–4500 rpm Spindle bore: 65 mm Feed rates: 0–30 m/min Rapid traverse in X and Z axis: 30 m/min Operating voltage: 400 V Connected load: 30 kVA Cross slide travel: 203.2 mm Longitudinal travel: 580/640 mm Space requirement approx.: 4.3 x 2.1 x 2.6 m Tool speeds: 0–5000 rpm Tool drive power: 5.5 kW Main spindle motor: 15/22 kW Machine weight approx.: 5.6 t C-axis: 360° x 0.001° increments Equipped with a 12-station turret with driven tool positions (C-axis), sub-spindle, power chuck, coolant system, and chip conveyor. Control: Hurco Ultimax. Supplied with extensive accessories.

Sąlyga: labai geros būklės (naudotas), Technical specifications: Refurbished in 2024 Working length: 3100 mm Distance between uprights: 2760 mm Pressing force: 220 t CNC control: OPERATOR II Nodpfxev Tcnlj Adueli Controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2 automatic crowning motorized adjustable backgauge Throat depth: 650 mm Stroke: 200 mm Working height: 960 mm Motor power: 17 kW CE marking Dimensions (L x W x H): approx. 3700 x 2400 x 2900 mm Weight: approx. 15 tons The seller assumes no liability for typographical or data transmission errors. The machine’s appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Sąlyga: naujas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2024, lazerio galia: 6 000 W, maks. lakšto storis: 25 mm, plieno lakšto storis (maks.): 25 mm, ruošinio svoris (maks.): 800 kg, bendras svoris: 5 000 kg, bendras ilgis: 5 000 mm, bendras plotis: 2 500 mm, bendras aukštis: 2 200 mm, garantijos trukmė: 12 mėnesiai, padavimo ilgis X ašis: 3 000 mm, padavimo eiga Y ašimi: 1 500 mm, darbo diapazonas: 3 000 mm, With the OR-S1530, Oree Laser offers a compact and user-friendly large-format laser cutting system. Our company, SF-Tech Engineering GmbH, is the Swiss representative for Oree Laser. All machines are newly imported and assembled according to customer specifications. Training as well as service are also provided by us. In our showroom, you can test the OR-S1530 with all accessories (high-pressure compressor, extraction system, etc.). Technical Data Working area: 3060mm x 1530mm External dimensions: L:4950, W:2300, H:2130 Weight: approx. 4,500kg Positioning accuracy: 0.03mm Max. cutting speed: 115m/min Maximum acceleration: 0.8G Laser power: 6000 Watt Laser source: MAX Cutting head: Raytool or BOCI Fume extraction: Zone-controlled extraction The side machine door can be easily raised or lowered at the push of a button. The total height of the machine is 2200mm. The worktable can be easily pulled out sideways by hand, allowing safe and rapid loading and unloading of the machine. There are now two versions: 1. Version: 60% extension table, no floor support, max. load 800kg. Nodjr D N Dzepfx Adujli 2. Version: 120% extension table, with fold-out arms, max. load 900kg. Don’t hesitate to visit us at our showroom in 6281 Hochdorf.

Sąlyga: naujas, Table height: 650 - 1050 mm Dimensions (LxWxH): 2480 x 1230 x 650 to 1050 mm Table width: 1230 mm Table length: 2480 mm Weight approx.: 733 kg This allows the user to flexibly adjust the working surface height according to requirements, enhancing productivity and ergonomics. Height adjustment is standardly achieved via a manual hydraulic system within a range of 650 to 1050 mm (other heights available on request). Like the SST fix series, the worktop features a 100 x 100 mm grid of Ø 28 mm holes. When used in combination with processing machines, test or post-processing fixtures (deburring, marking, checking) can be adjusted to match the clamping table height of the respective machine. The table systems can be easily relocated on site using a pallet truck. These mobile systems, with their various fastening and securing options, have proven ideal for the maintenance of injection moulding and die-casting tools. Tools can be safely serviced directly after removal from the machine and transferred to maintenance for repairs. Thanks to the fully bolted design of the clamping plate, the work surface can be cost-effectively replaced if worn in the future. Nlodpfx Aefk Aifeduei Price must be confirmed with the manufacturer before ordering! For accessories and further information, please follow this link:

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2021, Funkcionalumas: visiškai funkcionalus, Technical Specifications: • Programmable control cutting machine, • Automatic straightening unit, • Sectional roller shear, • Labeling system, • Outfeed conveyor belt, • Control panel, • Maximum sheet working width: 1270 mm, • Straightening rollers: 6 units, • Number of blades: 5 pairs, Nlsdpewi Twhefx Aduei • Blade material: stainless steel.