CNC tekinimo ir frezavimo centras

DMG MORI NLX 2500 SY / 700

Būklė: geras (naudotas), Gamybos metai: 2017, veikimo valandos: 8 800 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: NL2561708843, ašies skaičius: 2, CNC Control: Mitsubishi M730UM (CELOS - ERGOline Touch) Capabilities Travel X-axis (mm): 260 Travel Y-axis (mm): ±50 Travel Z-axis (mm): 795 Turning length (mm): 705 Max. Turning diameter (mm): ø 366 Swing over bed (mm): ø 920 Swing over cross slide (mm): 740 Bar capacity (mm): 80 Tool Magazine Tool stations: 20 Tool holder: BMT40 Max. speed driven tools (rpm): 10,000 Driven tools power (kW): 5.5/4.9/4.2 (3 min/5 min/continuous) Rapid traverse rate (m/min): 30 Main Spindle Max. spindle speed (rpm): 4,000 Spindle motor power (kW): 18.5/18.5/15 (25%ED/50%ED/continuous) Max. torque (Nm): 49 Sub-spindle Max. spindle speed (rpm): 5,000 Spindle motor power (kW): 11/7.5 (25%ED/continuous) Max. torque (Nm): 22 Sub-spindle travel (mm): 734 Cooling System Tank capacity (L): 366 Equipment Chip conveyor Iajdpeyzxcgefx Aausr Signal light Machine hours: Power-on hours: 19,393 Cutting hours: 8,800 Rated power (kVA): 48 Base Machine: Dimensions / Weight Length (mm): 5,330 Width (mm): 4,100 Height (mm): 2,395 Weight (kg): 8,360 Depicted tools, driven tools and both chucks are not included in the scope of delivery.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2014, X ašies eiga: 1 600 mm, Y ašies eiga: 1 100 mm, Z ašies eigos atstumas: 1 400 mm, greitas poslinkis X ašimi: 60 000 m/min, greitas poslinkis Y ašis: 60 000 m/min, greitasis eiga Z ašyje: 60 000 m/min, stalo plotis: 1 000 mm, stalo ilgis: 1 250 mm, stalo apkrova: 3 000 kg, įrankių magazino lizdų skaičius: 180, X ašis: 1600 mm Y ašis: 1100 mm Z ašis: 1400 mm B ašies indeksavimas: 360000° Stalo ilgis: 1250 mm Stalo plotis: 1000 mm Stalo apkrova: 3000 kg Padėklų skaičius: 2 X ašies pastūma: 60000 mm/min Y ašies pastūma: 60000 mm/min Z ašies pastūma: 60000 mm/min Įrankio tvirtinimas: HSK-100 ISO/Bt/Mk Veleno galia: 52 kW Sukimosi greitis: 12000 aps./min. Įrankių keitiklis: 180 Iedpfox Sqptex Aaujar Valdomų ašių skaičius: 4 Ilgis: 9170 mm Plotis: 6320 mm Aukštis: 3969 mm Svoris: 39500 kg

Būklė: naudotas, Gamybos metai: 2017, Technical details: Turning diameter: 356 mm Turning length: 705 mm Control: CELOS M730 UM MAPPS Swing diameter: 742 mm Standard turning diameter: 275 mm Travel - X axis: 260 mm Travel - Y axis: 100 (±50) mm Travel - Z axis: 795 mm Rapid traverse - longitudinal/plan: 30 / 30 m/min Rapid traverse B axis (sub-spindle part transfer): 734 m/min Spindle 1 speed: 4000 rpm Spindle 1 power: 15/18.5/18.5 kW Spindle 1 torque: 409/505/599 Nm Spindle 1 max. bar diameter: 80 mm Spindle 2 speed: 4500 rpm Spindle 2 power: 7.5/11 kW Turret stations / driven stations: 20 / 20 BMT40 Driven tool speed: 10,000 rpm Driven tool drive power: 3.7/5.5/5.5 kW Driven tool torque: 14 / 24 Nm Total power requirement: 38 kVA Machine weight approx.: 6.3 t Space requirements approx.: 4 (9) x 2.1 x 2.2 m Equipment: Chip conveyor Bar feeder interface Parts catcher spindle 1 and spindle 2 Workpiece and total piece counter Three-color signal lamp Spindle 1 power chuck Kitagawa B 210 (250 mm) Spindle 2 power chuck Kitagawa B 206 (160 mm) Parts outfeed conveyor Automatic door Interface for internal coolant supply Internal coolant supply 70 bar, Knoll Program restart Presetting device spindle 1 & 2 Coolant shower 1m short bar loader magazine IRCO Iodpfeyxpv Sjx Aauear High-performance precision turning center with Y-axis and counter spindle. Perfectly suited for machining complex turned parts with off-center milling operations. Easy programming of the machine via CELOS-MAPPS 4 dialog control. Machine can be demonstrated under power and with chips. Very few operating hours. All available (driven) tool holders included. IRCO Simag bar loader included.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2018, veikimo valandos: 23 501 h, Funkcionalumas: visiškai funkcionalus, tekėjimo ilgis: 705 mm, tekėjimo skersmuo: 366 mm, ašies variklio galia: 18 W, veleno greitis (min.): 4 000 aps./min, veleno greitis (maks.): 10 000 aps./min, X ašies eiga: 260 mm, Y ašies eiga: 50 mm, Z ašies eigos atstumas: 795 mm, sukimosi greitis (maks.): 10 000 aps./min, bendras aukštis: 2 395 mm, bendras ilgis: 5 330 mm, bendras plotis: 4 100 mm, bendras svoris: 8 360 kg, CNC Control: Mitsubishi M730UM (CELOS - ERGOline Touch) Capabilities Travel X-axis mm: 260 Iajdpfsywtwwex Aauor Travel Y-axis mm: ±50 Travel Z-axis mm: 795 Turning length mm: 705 max. Turning diameter mm: ø 366 Swing over bed mm: ø 920 Swing over cross slide mm: 740 Bar capacity mm: 80 Tool Magazine Tool positions: 20 Tool holder: BMT40 Upper Turret Number of tool stations: 20 Max. speed driven tools rpm: 10,000 Driven tool output kW: 5.5 / 4.9 / 4.2 (3 min/5 min/continuous) Rapid traverse rate: 30 Main Spindle Max. spindle speed rpm: 4,000 Spindle drive power kW: 18.5 / 18.5 / 15 (25% duty/50% duty/continuous) Max. torque Nm: 49 Sub Spindle Max. spindle speed rpm: 5,000 Spindle drive power kW: 11 / 7.5 (25% duty/continuous) Max. torque Nm: 22 Sub spindle travel mm: 734 Cooling System Tank capacity liters: 366 Equipment Electronic handwheel Chip conveyor Signal lamp High-pressure pump Touch probe Paper band filter Machine Hours: Power-on hours: 23,501 Cutting hours: 7,494 Rated power kVA: 48 Basic Machine: Dimensions / Weight Length mm: 5,330 Width mm: 4,100 Height mm: 2,395 Weight kg: 8,360

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 820 mm, Y ašies eiga: 550 mm, Z ašies eigos atstumas: 500 mm, Įranga: drožlių transporteris, Bendra informacija Valdymas: Max 5 Pagaminimo metai: 2023 Darbo sritis Judėjimo eiga X: 820 mm Judėjimo eiga Y: 550 mm Judėjimo eiga Z: 500 mm Judėjimo eiga B: +110° / -110° Judėjimo eiga C: 360° Įrankių keitimo sistema: 60 pozicijų Greitasis judėjimas X/Y/Z: 36 / 36 / 36 m/min Velenas Sukimosi greitis: 12 000 aps./min. Galia: 16 kW Įrankio tvirtinimas: SK40 NC sukamoji staklių plokštė Stalo tvirtinimo paviršiaus matmenys (I x P): 600 x 600 mm Veleno galas – stalas: 150 – 650 mm Stalo apkrova: 350 kg Iasdsyap Tfjpfx Aausr Įranga Drožlių transporteris Aušinimo skysčio tiekimas Tiesioginė padėties matavimo sistema Oras per veleną 5 ašių sinchroninis apdirbimas Detalės matavimas Įrankio matavimas Didelio slėgio aušinimo sistema (IKZ)

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2018, veikimo valandos: 23 501 h, Funkcionalumas: visiškai funkcionalus, sukimosi skersmuo virš skersinio stumduko: 740 mm, tekėjimo skersmuo: 920 mm, ašies variklio galia: 18 W, veleno greitis (maks.): 4 000 aps./min, X ašies eiga: 260 mm, Y ašies eiga: 50 mm, Z ašies eigos atstumas: 795 mm, frezos veleno ilgis: 91 mm, sukimosi greitis (maks.): 10 000 aps./min, bendras aukštis: 2 395 mm, bendras ilgis: 5 330 mm, bendras plotis: 4 100 mm, sūpynės skersmuo virš skersinio vežimo: 740 mm, veleno nosis: JIS A2-8, bendras svoris: 8 360 kg, CNC Control: Mitsubishi M730UM (CELOS - ERGOline Touch) Capabilities Travel X-axis mm: 260 Travel Y-axis mm: ±50 Travel Z-axis mm: 795 Turning length mm: 705 Max. turning diameter mm: ø 366 Swing over bed mm: ø 920 Swing over cross slide mm: 740 Bar capacity mm: 80 Tool Magazine Number of tool positions: 20 Tool holder: BMT40 Upper Turret Number of tool positions: 20 Max. speed driven tools rpm: 10,000 Driven tool power kW: 5.5/4.9/4.2 (3 min/5 min/cont) Y-axis travel mm: 100 Rapid traverse rate: 30 Main Spindle Max. spindle speed rpm: 4,000 Spindle motor power kW: 18.5/18.5/15 (25%ED/50%ED/cont) Spindle bore mm: 91 Chuck type: Hollow chuck (Ø254 mm) BB210A821 Manufacturer: KITAGAWA Spindle nose: JIS A2-8 Max. torque Nm: 49 Sub-Spindle Max. spindle speed rpm: 5,000 Spindle motor power kW: 11/7.5 (25%ED/cont) Spindle bore mm: 73 Chuck type: Hollow chuck (Ø210 mm) BB208A621 Manufacturer: KITAGAWA Spindle nose: JIS A2-5 Max. torque Nm: 22 Sub-spindle travel mm: 734 Cooling system Tank volume liters: 366 Equipment Electronic handwheel Chip conveyor Signal lamp High-pressure pump Mist separator Work area light Dual foot switch for main and sub-spindle Coolant gun Measuring probe Iedpfxjwkf H De Aauear Paper band filter Preparation for robot operation Robot data - Fanuc - R-30iA / Type M-16iB/20 Availability of 10 pallets in the warehouse (10 slots) Clamping by robot: ø40 to 220mm x Height 20mm Max. weight per robot piece: 5.6kg Machine run time: Power-on hours: 23,501 Nominal power kVA: 48 Cutting time: 7,494 Base machine: Dimensions / Weight Length mm: 5,330 Width mm: 4,100 Height mm: 2,395 Weight kg: 8,360

Būklė: naudotas, TECHNICAL DATA - Number of axes: 6 - Number of spindles: 2 Iaedpfx Aox H Atyeauer - Number of turrets: 1 MAIN SPINDLE - Spindle nose: A2-8" - Spindle drive power: 18.5 kW - Spindle speed: 4000 rpm - Max. bar capacity: 90 mm - Max. machining diameter: 460 mm - Minimum C-axis resolution: 0.001° SUB SPINDLE - Spindle nose: A2-6" - Spindle drive power: 11 kW - Spindle speed: 6000 rpm - Minimum C-axis resolution: 0.001° TURRET 1 - Number of positions: 12 - Number of driven positions: 12 - Travel X/Z: 260/795 mm - Y-axis travel: +/-50 mm - Tool type: BMT - Driven tool speed: 10,000 rpm - Driven tool power: 5.5 kW ELECTRICAL SUPPLY - Supply voltage: 400 V - Total installed power: 41 kW MACHINE HOURS - Power-on hours: 21,392.8 h - Operating hours: 13,797 h EQUIPMENT - Control: CELOS - Interfaces: Ethernet / RS232 / USB / PCMCIA - Teach-in programming: MAPPS V - 3-color status tower - Coolant tank: KNOLL * with high-pressure pump: 70 bar * with paper filter - Tailstock option with sub spindle - Chip conveyor - Tool probe - Parts catcher - Parts conveyor belt - Bar feeder: LNS QUICKLOAD - Electrical transformer - Number of driven tool holders: 2 - Number of stationary tool holders: 10 - Collet chuck

Būklė: naudotas, Gamybos metai: 2007, Turning diameter: 140 mm Turning length: 615 mm Control: C200-4D Spindle bore: 65 mm Spindle speed: 5,000 rpm Torque at 40% / 100% duty cycle: 145 / 105 kW Turret slides: 1, 2 and 3 X-axis travel: 110 mm Z-axis travel: 360 mm Y-axis travel: 70 mm Rapid traverse X/Y/Z: 25/12/45 m/min Slide travel X-direction: 150 mm Isdpfowzynqex Aaujar Slide travel Z-direction: 600 mm Spindle speed: 5,000 rpm B-axis: B correction axis +/- 1° Tool turret – number of stations: 3 x 12 Tool mounting: DIN 69880 VDI 25 x 48 C-axis: 0.001° Total power requirement: 61 kW Machine weight approx.: 6.5 t Space requirements approx.: 9.75 x 3.10 x 2.85 m Loading: Multi-channel bar feeder Breuning Profimat 65.8x270/8, year 2005 For bars with lengths from 500 to 3,000 mm, 8 guide channels with spindle liner tubes (Ø 16, 25, 30, 40, 45, 55, 60, 65 mm) Unloading: Workpiece unloading unit BREUNING ILS-REX-7208, year 2007

Būklė: naudotas, Gamybos metai: 2014, Maximum turning diameter: 366 mm Turning length: 705 mm Control system: M 730 BM MAPPS IV Swing diameter over bed: 920 mm Swing diameter over cross slide: 742 mm Main spindle speed range: 4,000 rpm Main spindle drive power: 18.5 / 15 kW Spindle nose: JIS A-8 Spindle bearing diameter: 140 mm Spindle bore: 91 mm Max. usable bar diameter: 80 mm Chuck diameter: 250 mm Sub-spindle speed range: 6,000 rpm Sub-spindle drive power: 11 / 7.5 kW Spindle nose: JIS A2-5 Spindle bearing diameter: 85 mm Spindle bore: 43 mm Max. usable bar diameter (–): mm Chuck diameter: 170 mm X-axis travel: 260 mm Z-axis travel: 795 mm Y-axis: +/- 50 mm Rapid traverse (X / Y / Z): 30 / 10 / 30 m/min Number of tool stations: 12 positions Tool holder: BMT 60 Square tool height: 25 mm Drill shank diameter: 50 mm Turret indexing time: 0.27 sec. Driven tool speed range max.: 10,000 rpm Driven tool drive power: 5.5 / 3.7 kW Total power requirement: 40 kVA Machine weight approx.: 6.4 t Space requirement approx.: 5.0 x 3.0 x 2.3 m CNC Turning and Milling Center DMG MORI - NLX 2500 SY / 700 Iodpju Hq Rlsfx Aaujar - Main and sub-spindle - C-axis - Y-axis - Driven tools

Būklė: naudotas, Gamybos metai: 2018, Maximum turning diameter: 356 mm Turning length: 705 mm Control: M730 UM Mapps CELOS Swing diameter over bed: 920 mm Swing diameter over cross slide: 742 mm Spindle speed range – main spindle: 4,000 rpm Drive power – main spindle: 18.5 / 15 kW Spindle nose: JIS A2-8 Spindle bore: 80 (91) mm C-axis: 0.001° Spindle speed range – sub spindle: 6,000 rpm Drive power – sub spindle: 11 / 7.5 kW Iaodpfx Asvy Ig Hsauer Spindle bore: 43 mm C-axis: 0.001° X-travel: 260 mm Z-travel: 795 mm Y-axis: +/-50 mm Rapid traverse (X / Y / Z): 30 / 10 / 30 m/min Number of tool stations: 12 positions Square tool shank height: 25 mm Drill shank diameter: 50 mm Turret indexing time: 0.27 sec Speed range – driven tools max.: 10,000 rpm Drive power – driven tools: 5.5 / 4.2 kW Total connected load: 41 kVA Machine weight approx.: 6.4 t Installation dimensions approx.: 5.0 x 3.0 x 2.3 m CNC turning and milling center DMG MORI – NLX 2500 SY / 700 - Sub spindle - Driven tools - C and Y axis

Būklė: naudotas, Gamybos metai: 2005, Technical Details: Turning diameter: 275 mm Turning length: 900 mm Spindle bore: 65 mm Drive power at 100% duty cycle: 25/20 kW Spindle speeds: 1 - 5000 rpm Spindle diameter at front bearing: 110 mm C-axis: 1 - 500 rpm Number of tool carriers: 4 Turret: 1 X-axis: 290 mm Y-axis: 165 mm Z-axis: 360 mm B-axis: 360° Rapid traverse speed: 18/30 m/min Number of tools: 2x2 + 2x2 Number of driven tools: 2x2 + 2x2 mm Tool speeds: 8000 / 2000 rpm Drive power at 25% duty cycle: 5.8 kW Tool holder: TRAUB 60 Turret: 2/3/4 X-axis: 170 mm Z-axis: 600/950 mm Y-axis: +/- 60 mm Iodjwp D Nbspfx Aausar Rapid traverse speed: 18/15/30 m/min Number of driven tools: 10 mm Tool speeds: 1 - 6000 rpm Drive power at 25% duty cycle: 5.8 kW Tool interface: DIN 69880 40 x 63 Total connected load: 95 kW Machine weight approx.: 16 t Space requirement approx.: 10.0 x 3.5 x 3.0 m Equipped with CNC TRAUB TX 8i, bar feeder TRAUB Stamag DNH61 / 3000, main and counter spindle with C-axis 1 vertical tool carrier with B-axis 3 turret tool carriers Extraction unit, coolant system with coalescence separator and chip conveyor 2 pcs. 3-jaw chucks SMW KNCS-N 170-43 2 pcs. HAINBUCH clamping chucks Spanntop 40 pcs. various static tool holders 6 pcs. various driven tool holders Spare parts package