CNC staklės su dviem velenais

Takisawa TT-500 GD

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2010, Funkcionalumas: visiškai funkcionalus, Įranga: dokumentacija / vadovas, drožlių transporteris, Control system: FANUC 18i-MB Travel X / Y / Z: 1,020 / 510 / 510 mm Feed rate X / Y / Z: 1 – 10,000 mm/min Rapid traverse X / Y / Z: 48,000 mm/min Table size (W x D): 1,200 x 510 mm Spindle speed: 15,000 rpm Internal coolant through spindle: 20 bar Tool holder: BT 40 Tool changer: 48 positions Weight: approx. 7,500 kg Dimensions (W x D x H): approx. 3,100 x 2,200 x 2,900 mm Godstz T Smepfx Aczjtt Operating hours: Spindle hours: 9,310 Accessories: RENISHAW tool measuring system type OMP 40, coolant tank, machine manual, machine lamp, chip conveyor

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2022, veikimo valandos: 13 116 h, Max. bar capacity mm 20 Max. Z-axis travel sliding headstock/short turning mm 1) 205 / 80 Max. spindle speed rpm 10,000 Drive power 100%/40% duty cycle kW 3.0 / 5.5 Torque 100%/40% duty cycle Nm 5.73 / 10.5 / max. 17.2 C-axis resolution degrees 0.001 Max. rapid traverse Z m/min 20 Tool stations quantity 8 Driven tools quantity 8 Max. speed rpm 12,000 / 8,000 Tool holder diameter mm 45 Drive power 100%/40% duty cycle kW 1.0 / 2.0 Turning tool cross-section mm 16x16 / 20x20 Slide travel X mm 120 / 165 Slide travel Y mm ±25.4 Slide travel Z mm 254 / 567.5 Rapid traverse X / Y / Z m/min 20 / 20 / 40 B-axis swivel angle degrees 105 Lower turret Tool stations quantity 8 Driven tools quantity 8 Max. speed rpm 12,000 Tool holder diameter mm 45 Drive power 100%/40% duty cycle kW 1.0 / 2.0 Turning tool cross-section mm 16x16 / 20x20 Slide travel X mm 120 Slide travel Y mm ±25.4 Slide travel Z mm 155 Rapid traverse X / Y / Z m/min 20 / 20 / 40 Backworking unit Tool stations quantity 4 Slide travel X / Y / Z mm 120 / ±25.4 / 155 Holder diameter mm 25 Sub spindle Max. spindle bore mm 20 Max. speed rpm 10,000 Drive power 100%/40% duty cycle kW 3.0 / 5.5 Torque 100%/40% duty cycle Nm 5.73 / 10.5 / max. 17.2 Slide travel X mm 235.5 Slide travel Z mm 258 C-axis resolution degrees 0.001 Rapid traverse X / Z m/min 20 / 40 Coolant system base unit Pump pressure bar 3 / 8 Tank capacity l 250 Pump rate at 3 / 8 bar l/min 80 / 120 Filtration fineness µm 200 Machine dimensions Length x Width x Height mm see layout plan * Weight kg 5,000 * Gsdpowuddvofx Aczstt Connected load kW 40 (47 kVA)

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2008, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 1 500 mm, Y ašies eiga: 700 mm, Z ašies eigos atstumas: 610 mm, nominali (akivaizdi) galia: 37 kVA, sukimo momentas: 236 Nm, valdiklių gamintojas: Heidenhain iTNC530, valdiklio modelis: iTNC530, stalo plotis: 700 mm, stalo ilgis: 1 700 mm, stalo apkrova: 700 kg, sukimosi greitis (maks.): 12 000 aps./min, bendras svoris: 9 000 kg, veleno greitis (maks.): 12 000 aps./min, veleno veikimo valandos: 16 580 h, ašies variklio galia: 37 W, ašies skaičius: 1, įrankių magazino lizdų skaičius: 48, Įranga: dokumentacija / vadovas, drožlių transporteris, 3-axis CNC machining center Heidenhain iTNC530 X travel: 1500 mm Godevz Tyuopfx Aczjtt Y travel: 700 mm Z travel: 610 mm Table size: 1700 x 700 mm Tool holder: SK40 Tool magazine: 48 tools Rapid traverse: 36 m/min Table load capacity: 700 kg Through-spindle coolant: 20 bar Chip conveyor Handwheel

Sąlyga: naudotas, Gamybos metai: 2012, Technical details: Swing diameter over bed: 20 mm Spindle bore: 3–20 mm Turning length: 250 mm Control: FANUC 31 i-A Main spindle speed: 10,000 rpm Counter spindle speed: 10,000 rpm Main spindle drive power: 3.7 kW Counter spindle drive power: 2.2 kW Number of tool stations: 35 Approx. machine weight: 3.3 t Space requirements (approx.): 2.11 x 1.2 x 1.89 m Used CNC sliding and fixed headstock turning/milling center with B-axis, Control: Fanuc 31i-A Max. machining length: 250 mm Number of controlled axes: 7 axes, up to 5-axis simultaneous machining B-axis: freely programmable from 0°–130° Bar capacity: Ø 3 mm to max. Ø 20 mm Main spindle drive power: 3.7 kW Counter spindle drive power: 2.2 kW Main spindle speed: 10,000 rpm Gtodevivx Nspfx Aczst Counter spindle speed: 10,000 rpm C-axis: main and counter spindle Number of linear slides: 2 Total number of tool stations: 35 Dimensions (LxWxH) in mm: 2,110 × 1,200 × 1,885 Weight: 3,300 kg Convertible between sliding head and fixed head turning Deep-hole drilling stations NAKANISHI high-speed spindle Rear carriage with Y-axis Cross drilling at the rear Chip conveyor Fire extinguishing system FMB Minimag 20 bar feeder, year 2012 Approx. 7,200 operating hours

Gamybos metai: 2002, Sąlyga: labai geros būklės (naudotas),

Sąlyga: geras (naudotas), Gamybos metai: 2019, Staklė turi 1500 veleno valandų DMG Mori CLX 350 V 4, Gsdpfoxy Hyzex Aczjtt Metai: 2019, Valdymas: DMG Mori Slim Line / Siemens Shoptrun, X/Z ašių eiga: 185/540 mm, Y ašies eiga: 80 mm, 12 pozicijų revolveris, Varomi įrankiai, C ašis, Tooleye įrankių matavimas, 3-žandų griebtuvas KNCS 225/66, Spaustuvinis griebtuvas, VDI 30 laikiklis, Didelio slėgio aušinimas 12 bar, Gręžtuvo atrama, Drožlių transporteris, Paruošta strypų padavimo įrenginiui,

Sąlyga: geras (naudotas), Gamybos metai: 1999, Ranka parodytos dalys nepridedamos. Gtodpfx Acswbz Tuozet

Sąlyga: naudotas, Gamybos metai: 1999, Technical Details: X-axis travel: 3,500 mm Y-axis travel: 2,200 mm Z-axis travel: 1,200 mm C-axis: +/- 200° Control system: Heidenhain TNC 426 Spindle speed (left rotation): max. 10,000 rpm Spindle speed (right rotation): max. 10,000 rpm Distance between columns: 2,500 mm Distance spindle/table (vertical): 1,230 mm Clamping surface (table): 3,000 x 2,000 mm Table load capacity: 10 t Tool holder: HSK A 63 Feed rate X/Y/Z: max. 20 m/min Compressed air: 8 bar Total power requirement: approx. 100 kW Machine weight approx.: 40,000 kg Machine dimensions: 18.0 x 6.0 x 5.8 m 5-Axis Gantry Milling Machine Milling spindle: Manufacturer Hauser, type HS 256A-01 Uni, max. speed 10,000 rpm, direct drive Milling head: Manufacturer Hamül, fork design, integrated A-axis = swivel angle +/- 110° Tool changer: Manufacturer Hamül, rotary table type with turntable, for 32 tool positions Chip conveyors: 2 hinge belt conveyors, manufacturer DGS, with water tank, insertion length 8,500 mm Make BKW, type DL 55V-2KK, capacity 2.41 l/min; Combined oil-water cooling unit for hydraulic oil and spindle cooling Coolant system: Band filter, manufacturer DGS, type SBF 150 Operation: via control console, type Heidenhain LE 426 X, Y and Z axes equipped with Heidenhain linear scales Handheld control unit: HR 410 Hydraulic weight compensation (Z-axis) Equipment: Enclosure (protective panels with viewing windows and safety doors) Gsdpfou Nc Emex Aczett Hydraulic unit Work area lighting

Sąlyga: naudotas, CNC lathe with Y axis and sub-spindle Graziano GT 300 Y Gital Gildemeister CNC Fanuc 16i - T, ASA 5. Main spindle power 15 kW. Self-centering chuck diameter 175 mm. ASA 5 spindle mount. Bar capacity 52 mm. Turning diameter 230 mm. Turning length 500 mm. Spindle speed 5000 rpm. Number of tool turrets: 1. Number of tool stations in the first turret: 12. Number of live tools in the first turret: 12. First turret tool interface: VDI 30. X-axis travel 160 mm. Y-axis travel +/- 32 mm. Z-axis travel 550 mm. Rapid traverse feed (X, Y, Z): 30 m/min. Sub-spindle: yes. ASA 5 spindle nose. Sub-spindle speed 5000 rpm. Sub-spindle power 9 kW. Sub-spindle bar capacity 30 mm. Bar feeder make and model: LNS with single bar tube. Chip conveyor: belt type. Presetter: yes. Year: 2000. The machine is in our warehouse in Gussago BS, powered up. Mimu Machine Tools, Italy. Gtedpfjqn E U Tox Aczst

Gamybos metai: 1985, Sąlyga: geras (naudotas), mašinos/transporto priemonės numeris: 04.2187, Hydraulic Internal Broaching Machine in technically good condition Manufacturer: Arthur Klink Year of manufacture: 1985, overhauled Gjdpfx Acoixntwozjtt Weight: 2 t Model: RIW 10 x 1200 x 400 Machine No.: 04.2187 Pulling force: 10,000 kg at 3 m/min Broaching speeds: hydraulically infinitely variable from 1 m/min to 7 m/min Return stroke speed: hydraulically infinitely variable from 7 m/min to 30 m/min Maximum stroke: 1200 mm Broaching tool clamping: universal pull head for flat shanks up to 26 mm width Maximum workpiece diameter: Ø max. 480 mm (limited by oil and chip tray) Table aperture: Ø 70 mm Power supply: 380 Volt / 50 Hz / 5 kW