CNC vienalaikio tekinimo centras

Spinner TTS65-Triplex

Sąlyga: naudotas, Gamybos metai: 2015, Turning diameter: 250 mm Turning length: 600 mm Control: FANUC Series 31i-Model A Travel – X-axis: 180 mm Travel – Y-axis: ±45 mm --- Main Spindle --- Spindle speed: 0–5,000 rpm Bar capacity: 65 mm --- Counter Spindle --- Spindle speed: 0–7,000 rpm Bar capacity: 42 mm --- Upper Turret 1 --- Number of tool stations: 12 Tool mounting: BMT 45 Axes: X1 / Y1 / Z1 Tool speed: 8,000 rpm --- Upper Turret 2 --- Number of tool stations: 12 Tool mounting: BMT 45 Tool speed: 8,000 rpm Axes: X3 / Y3 / Z3 --- Lower Turret 3 --- Number of tool stations: 12 Tool mounting: BMT 45 Axes: X2 / Z2 Tool speed: 8,000 rpm CNC Turning and Milling Center | SPINNER - TTS 65 Triplex equipped with main and sub-spindle (each including C-axis), 3 Triplex turrets configured for driven tools, and a bar loader [Top Automazioni X-Files-S Series 3000 Version SX]. The machine has only 3,500 operating hours (machining time). The machine is in good condition and can be inspected under power. Further technical details can be found in the offer. Iasdpfx Afsx I Shps Iol ----- #Tags: TTS65Triplex | TTS 65Triplex | TTS-65-Triplex | TTS-65 Triplex

Sąlyga: geras (naudotas), Gamybos metai: 2000, veikimo valandos: 10 000 h, Funkcionalumas: visiškai funkcionalus, tekėjimo ilgis: 1 105 mm, tekėjimo skersmuo: 610 mm, veleno greitis (maks.): 3 500 aps./min, veleno skylė: 70 mm, X ašies eiga: 580 mm, Y ašies eiga: 210 mm, Z ašies eigos atstumas: 1 137 mm, tvirtinimo skersmuo: 63 mm, sukimosi greitis (maks.): 6 000 aps./min, įvesties srovės tipas: Oro kondicionierius, Įranga: sūkių greitis be galo kintamas, The machine is in good condition. Major maintenance work in recent years: 30.04.2020 Milling spindle overhaul CHF 35,000 16.07.2021 Software update (Wenk AG) CHF 1,600 20.06.2022 Central lubrication pump replaced CHF 400 (All prices are in CHF) Known defects: ·Error message at startup ·Coolant for internal cooling flows out at the rear side of the milling spindle ·Overload message when the machine is cold and rapid traverse is at 100% ·Over 150 various tool holders ·Spare bushings for the tool magazine ·Spare limit switches for the tool changer position monitoring ·2 pieces 3-jaw chuck, diameter 250 mm (mounted during inspection) ·1 piece 3-jaw chuck, diameter 250 mm ·1 piece 3-jaw chuck, diameter 300 mm ·1 piece 4-jaw chuck, diameter 400 mm ·2 sets hard jaws for external clamping, short version ·1 set hard jaws for external clamping, long version ·Various sets of soft jaws, used ·Replacement filters for the Kowap high-pressure unit (5 pieces in stock, approx. 2 pieces by delivery – 1 filter approx. 20-25 CHF) ·Coolant purification system or oil separator (custom-made) ·Cabinet suitable for the tool magazine, adapted for KM63 holders and numbered with 80 slots ·Specific clamping accessories suitable for KM63 holders, which allow direct clamping of indexable inserts ·Iscar side milling cutter suitable for one holder, D160mm, width 4mm ·Gear cutter suitable for one holder (custom-made – for soft jaws p=1.5mm) ·Cleaning/deburring brush suitable for one holder We can also provide you with leasing and financing offers for the machine. An inspection appointment can be arranged upon request. Iedpfx Aoxp Hmaef Ioal

Sąlyga: naudotas, Gamybos metai: 2012, Technical details: Swing diameter over bed: 20 mm Spindle bore: 3–20 mm Turning length: 250 mm Control: FANUC 31 i-A Main spindle speed: 10,000 rpm Counter spindle speed: 10,000 rpm Main spindle drive power: 3.7 kW Counter spindle drive power: 2.2 kW Number of tool stations: 35 Approx. machine weight: 3.3 t Space requirements (approx.): 2.11 x 1.2 x 1.89 m Used CNC sliding and fixed headstock turning/milling center with B-axis, Control: Fanuc 31i-A Max. machining length: 250 mm Number of controlled axes: 7 axes, up to 5-axis simultaneous machining B-axis: freely programmable from 0°–130° Bar capacity: Ø 3 mm to max. Ø 20 mm Main spindle drive power: 3.7 kW Counter spindle drive power: 2.2 kW Main spindle speed: 10,000 rpm Counter spindle speed: 10,000 rpm C-axis: main and counter spindle Number of linear slides: 2 Total number of tool stations: 35 Dimensions (LxWxH) in mm: 2,110 × 1,200 × 1,885 Weight: 3,300 kg Convertible between sliding head and fixed head turning Deep-hole drilling stations NAKANISHI high-speed spindle Rear carriage with Y-axis Cross drilling at the rear Chip conveyor Fire extinguishing system Iaodpfx Afjvivx Ns Iol FMB Minimag 20 bar feeder, year 2012 Approx. 7,200 operating hours

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2014, veikimo valandos: 14 500 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 11779, tekėjimo ilgis: 700 mm, tekėjimo skersmuo: 250 mm, ašies variklio galia: 26 000 W, veleno greitis (min.): 3 200 aps./min, veleno greitis (maks.): 3 200 aps./min, veleno skylė: 65 mm, bendras svoris: 8 500 kg, incl. 2x Hainbuch/Ortlieb chucks, conveyor belt, swiveling touch probe with 2 heads MANUAL GUIDE_dialog programming high-pressure pump 18 bar/20 l/min SBS tool breakage monitoring, wear control Machine year: 2013 – Commissioned: 05/2014 good & well-maintained condition original purchase price approx. €300,000 Iaedperdy Uqjfx Af Iel !!! ATTENTION -> Sale without loader!!!

Gamybos metai: 1985, Sąlyga: paruoštas naudoti (naudotas), Table dimensions: 1435x460 mm, number/width/spacing: 5/16/80 mm, control unit: TNCi-120, length: 1435 mm, width: 2330 mm, height: 1648 mm, weight: 3.1 t, with documentation, accessories available, no known defects, on-site inspection possible. Iodpelbmupefx Af Ieal

Sąlyga: geras (naudotas), Gamybos metai: 1988, Sunkiojo tipo didelio tikslumo horizontalus tekinimo staklės su hidrauline Rohm užspaudimo sistema, stumdoma dalis su dviem darbo padėtimis, Sauter 4 pusių įrankių laikiklis, žiedinio tekinimo agregatas, CNC 6 ašių, griebtuvas, drožlių transporterio sistema. Tinkamos dideliems medžiagos kiekiams nuimti bei itin tiksliam tekinimui. Staklės modifikuotos, sumontuotas 2000 mm skersmens veidinis tvirtinimo diskas, padidinti matmenys. Pagaminimo metai: 1988 Pagaminta: Vokietija Tekinimo diametras virš lovos: 2500 mm Tekinimo diametras virš teleskopinių gaubtų: 2200 mm Tekinimo diametras virš stumdomosios dalies: 1400 mm Tekinimo ilgis: 6000 mm 3 griebtuvų stalas, 2000 mm Isdpfxoxmb Ade Af Ioal Veleno skylė: 200 mm Prikabinamas žiedinio tekinimo įtaisas Apdirbamo ruošinio svoris: 4.500–40.000 kg Revolverinė galva: 4 pozicijos Veleno apsukos: 4–400 aps./min. Pagrindinis variklis Siemens 95,5 kW Didžiausias sukimo momentas: 40.000 Nm Bendras energijos poreikis: 125 kW Valdymas: CNC SIEMENS 8T, 6 valdomos ašys Staklių svoris: 43.000 kg Reikalinga erdvė: 13.000x4.000 mm

Gamybos metai: 1999, Sąlyga: paruoštas naudoti (naudotas), Travel X/Y/Z: 1050mm/800mm/880mm, B-axis: 360°, table dimensions X/Y: 630mm/630mm, number of pallets: 2, max. workpiece weight: 1500kg, spindle speed: 7000rpm, tool holder: SK50, power: 30kW, tool magazine capacity: 80, max. tool diameter: 135mm/260mm, max. tool weight: 30kg, rapid traverse: 40m/min. Machine dimensions X/Y/Z: approx. 6400mm/2600mm/3200mm, weight: approx. 19,700kg, control: Mazatrol 640M PC-Fusion-CNC. Includes 2-station pallet changer for 630mm/630mm pallets. Documentation available. On-site inspection possible. Iedpsvnd Susfx Af Ioal

Sąlyga: naudotas, Gamybos metai: 1999, Technical Details: X-axis travel: 3,500 mm Y-axis travel: 2,200 mm Z-axis travel: 1,200 mm C-axis: +/- 200° Control system: Heidenhain TNC 426 Spindle speed (left rotation): max. 10,000 rpm Spindle speed (right rotation): max. 10,000 rpm Distance between columns: 2,500 mm Distance spindle/table (vertical): 1,230 mm Clamping surface (table): 3,000 x 2,000 mm Table load capacity: 10 t Tool holder: HSK A 63 Feed rate X/Y/Z: max. 20 m/min Compressed air: 8 bar Total power requirement: approx. 100 kW Machine weight approx.: 40,000 kg Machine dimensions: 18.0 x 6.0 x 5.8 m 5-Axis Gantry Milling Machine Milling spindle: Manufacturer Hauser, type HS 256A-01 Uni, max. speed 10,000 rpm, direct drive Milling head: Manufacturer Hamül, fork design, integrated A-axis = swivel angle +/- 110° Tool changer: Manufacturer Hamül, rotary table type with turntable, for 32 tool positions Chip conveyors: 2 hinge belt conveyors, manufacturer DGS, with water tank, insertion length 8,500 mm Make BKW, type DL 55V-2KK, capacity 2.41 l/min; Combined oil-water cooling unit for hydraulic oil and spindle cooling Coolant system: Band filter, manufacturer DGS, type SBF 150 Operation: via control console, type Heidenhain LE 426 X, Y and Z axes equipped with Heidenhain linear scales Ijdpsu Nc Emjfx Af Isal Handheld control unit: HR 410 Hydraulic weight compensation (Z-axis) Equipment: Enclosure (protective panels with viewing windows and safety doors) Hydraulic unit Work area lighting

Sąlyga: naujas, Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 1 000 mm, Y ašies eiga: 600 mm, Z ašies eigos atstumas: 650 mm, valdiklių gamintojas: Heidenhain, valdiklio modelis: TNC640, Technology: Direct drive Speed: 12,000 rpm Power: 20 kW Torque: 128 Nm Tool holder: SK 40 Tool changer: 40 stations Working area Travel X: 1,000 mm Travel Y: 600 mm Travel Z: 650 mm Fixed table (X/Y): 1,100 x 600 mm Table load capacity: 1,100 kg Miscellaneous Rapid traverse (X/Y/Z): 36/36/32 m/min Equipment Chip management: Hinged belt conveyor Coolant management: Internal coolant supply 20 bar Coolant cleaning: Oil separator Electrical cabinet cooling: Air conditioning unit Workpiece measurement: Renishaw OMP 40 Iodpfxetpm Sto Af Ijal

Gamybos metai: 1984, Sąlyga: paruoštas naudoti (naudotas), Rafamet UBB 112/2 Minimální průměr běhounu kola: 700 mm Maximální průměr běhounu kola: 1120 mm Délka upnutí: 540 - 1050 mm Minimální délka nápravy dvojkolí: 1640 mm Maximální délka nápravy dvojkolí: 2800 mm Iaodpfx Afshvml Ie Iol Maximální šířka pneumatiky: 150 mm Maximální hmotnost dvojkolí: 4000 kg Rychlost posuvu saní: 2000 mm/min Maximální posuv saní: 2000 mm/min Výkon hlavního pohonu: 80 kW Hmotnost cca: 40 000 kg