CNC tekinimo ir frezavimo centras

DMG MORI NLX 2500 SY / 700

Būklė: naudotas, Gamybos metai: 2014, Maximum turning diameter: 366 mm Turning length: 705 mm Control system: M 730 BM MAPPS IV Swing diameter over bed: 920 mm Swing diameter over cross slide: 742 mm Main spindle speed range: 4,000 rpm Main spindle drive power: 18.5 / 15 kW Spindle nose: JIS A-8 Spindle bearing diameter: 140 mm Spindle bore: 91 mm Max. usable bar diameter: 80 mm Chuck diameter: 250 mm Sub-spindle speed range: 6,000 rpm Sub-spindle drive power: 11 / 7.5 kW Spindle nose: JIS A2-5 Spindle bearing diameter: 85 mm Spindle bore: 43 mm Max. usable bar diameter (–): mm Chuck diameter: 170 mm X-axis travel: 260 mm Z-axis travel: 795 mm Y-axis: +/- 50 mm Rapid traverse (X / Y / Z): 30 / 10 / 30 m/min Number of tool stations: 12 positions Nodpfsu Hq Rlex Afxewg Tool holder: BMT 60 Square tool height: 25 mm Drill shank diameter: 50 mm Turret indexing time: 0.27 sec. Driven tool speed range max.: 10,000 rpm Driven tool drive power: 5.5 / 3.7 kW Total power requirement: 40 kVA Machine weight approx.: 6.4 t Space requirement approx.: 5.0 x 3.0 x 2.3 m CNC Turning and Milling Center DMG MORI - NLX 2500 SY / 700 - Main and sub-spindle - C-axis - Y-axis - Driven tools

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2021, veleno greitis (maks.): 4 000 aps./min, X ašies eiga: 450 mm, Y ašies eiga: 200 mm, Z ašies eigos atstumas: 960 mm, ašių skaičius: 5, Šis 5 ašių Mazak INTEGREX J-200 S buvo pagamintas 2021 m. Jo didžiausias apdirbimo skersmuo - 500 mm, X ašies eiga - 450 mm, Y ašies eiga - 200 mm, o Z ašies eiga - 960 mm. Staklėse įrengtas 36 įrankių žurnalas, o didžiausias suklio sukimosi greitis - 4 000 aps/min. Jei ieškote aukštos kokybės frezavimo-apvertimo galimybių, apsvarstykite mūsų parduodamas "Mazak INTEGREX J-200 S" stakles. Susisiekite su mumis dėl išsamesnės informacijos. • Kontrolė: Sklandus G • Atstumas tarp velenų: 1000 + 440 mm Njdeyxc N Ejpfx Afxjwg • Didžiausias apdirbimo skersmuo: 500 mm • Suklio tvirtinimas: A2-6 • Didžiausia strypo talpa: 65 mm • Suklio anga: 76 mm • Įrankių laikiklis: Įrankiai: 36 Capto Papildoma įranga • Medienos drožlių transporteris: "Mayfran" juostos tipo

Būklė: labai geros būklės (naudotas), Gamybos metai: 2012, veikimo valandos: 10 168 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: NL254120635, CNC tekinimo staklės Gamintojas: DMG MORI Tipas: NLX 2500 SY 700 su WH10 automatizacija Pagaminimo metai: 2012 Tekinimo skersmuo: 460 mm Tekinimo ilgis: 795 mm Valdymas: MORI SEIKI M730 BM Apsisukimo skersmuo virš stalčiaus: 590/360 mm Veleno pratekėjimas: 80 mm Poslinkiai X/Z: 260/795 mm Bendras galios poreikis: 40 kVA Nwodpey Szwhjfx Afxeg Staklių svoris: apie 6,4 t Užimama vieta: apie 3.994 x 3.056 x 2.187 m

Būklė: labai geros būklės (naudotas), Gamybos metai: 2015, veikimo valandos: 6 147 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 7023000088B, Type of machine: CNC Turning and Milling Centre Manufacturer: DMG MORI Model: NLX2500SY/700 Year of manufacture: 2015 Control system: M730 UM Mapps CELOS Country of origin: Japan Delivery time: by arrangement Delivery terms: ex works Additional information: CNC Turning and Milling Centre DMG MORI NLX2500SY/700 Max. turning diameter: 356 mm Turning length: 705 mm Control: M730 UM Mapps CELOS Swing diameter over bed: 920 mm Swing diameter over cross slide: 742 mm Spindle speed range – main spindle: 4,000 rpm Nsdpfxjy Sxukj Afxowg Drive power – main spindle: 18.5 / 15 kW Spindle nose: JIS A2-8 Spindle bore: 80 (91) mm C-axis: 0.001° Speed range – sub spindle: 6,000 rpm Drive power – sub spindle: 11 / 7.5 kW Sub spindle bore: 43 mm C-axis: 0.001° X-axis travel: 260 mm Z-axis travel: 795 mm Y-axis travel: +/- 50 mm Rapid traverse (X / Y / Z): 30 / 10 / 30 m/min Number of tool stations: 12 positions Shank height for square tool: 25 mm Drill shank diameter: 50 mm Turret indexing time: 0.27 sec. Speed range – driven tools max.: 10,000 rpm Drive power – driven tools: 5.5 / 4.2 kW Total power requirement: 41 kVA Machine weight approx.: 6.4 t Space requirement approx.: 5.0 x 3.0 x 2.3 m CNC Turning and Milling Centre DMG MORI - NLX 2500 SY / 700 - Sub spindle - Driven tools - C, Y axis

Gamybos metai: 2011, būklė: paruoštas naudoti (naudotas), - NAUDOTAS - CNC FREZAVIMO STAKLĖS SU PERSLENKAMA KOLONA, SU ROTACINIU IR STUMDOMU STALU ILGINIS EIGIS: 8000 mm SKERSINIS EIGIS: 1500 mm Nsdpswl R Agefx Afxjwg VERTIKALUS EIGIS: 2500 mm GREITIEJI PAVARAI I-L-V: 35 m/min STALO MATMENYS: 2000 x 2000 mm STALO SKERSINIS EIGIS: 1500 mm MAKS. LEISTINA APKROVA: 15000 kg GALVUTĖ: AUTOMAT. A/B AŠYS; NEPERTRAUKIAMAS; ISO 50; 7000 aps./min.; 49 kW; 1180 Nm ĮRANKIŲ MAGAZINAS: GRANDININIS, 80 VIETŲ VALDYMO BLOKAS: HEIDENHAIN iTNC 530 PRIEDAI: DROŽLIŲ TRANSPORTERIS; NEŠIOJAMA VALDYMO RANKENĖLĖ; LAZERINIS ĮRANKIO NUSTATYMO ĮTAISAS PASTABA: SU ROTACINIU STALU 1500X1500 mm; MAKS. LEISTINA APKROVA 15000 kg

Būklė: naudotas, Gamybos metai: 2017, Technical details: Turning diameter: 356 mm Turning length: 705 mm Control: CELOS M730 UM MAPPS Swing diameter: 742 mm Standard turning diameter: 275 mm Travel - X axis: 260 mm Travel - Y axis: 100 (±50) mm Travel - Z axis: 795 mm Rapid traverse - longitudinal/plan: 30 / 30 m/min Rapid traverse B axis (sub-spindle part transfer): 734 m/min Spindle 1 speed: 4000 rpm Spindle 1 power: 15/18.5/18.5 kW Spindle 1 torque: 409/505/599 Nm Spindle 1 max. bar diameter: 80 mm Spindle 2 speed: 4500 rpm Spindle 2 power: 7.5/11 kW Turret stations / driven stations: 20 / 20 BMT40 Driven tool speed: 10,000 rpm Driven tool drive power: 3.7/5.5/5.5 kW Driven tool torque: 14 / 24 Nm Total power requirement: 38 kVA Machine weight approx.: 6.3 t Space requirements approx.: 4 (9) x 2.1 x 2.2 m Equipment: Chip conveyor Bar feeder interface Parts catcher spindle 1 and spindle 2 Workpiece and total piece counter Three-color signal lamp Spindle 1 power chuck Kitagawa B 210 (250 mm) Spindle 2 power chuck Kitagawa B 206 (160 mm) Parts outfeed conveyor Automatic door Interface for internal coolant supply Internal coolant supply 70 bar, Knoll Program restart Presetting device spindle 1 & 2 Coolant shower 1m short bar loader magazine IRCO High-performance precision turning center with Y-axis and counter spindle. Perfectly suited for machining complex turned parts with off-center milling operations. Easy programming of the machine via CELOS-MAPPS 4 dialog control. Machine can be demonstrated under power and with chips. Nedpfx Ajyxpv Sofxswg Very few operating hours. All available (driven) tool holders included. IRCO Simag bar loader included.

Būklė: geras (naudotas), Gamybos metai: 2017, veikimo valandos: 8 800 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: NL2561708843, ašies skaičius: 2, CNC Control: Mitsubishi M730UM (CELOS - ERGOline Touch) Capabilities Travel X-axis (mm): 260 Travel Y-axis (mm): ±50 Travel Z-axis (mm): 795 Turning length (mm): 705 Max. Turning diameter (mm): ø 366 Swing over bed (mm): ø 920 Swing over cross slide (mm): 740 Bar capacity (mm): 80 Tool Magazine Tool stations: 20 Tool holder: BMT40 Max. speed driven tools (rpm): 10,000 Driven tools power (kW): 5.5/4.9/4.2 (3 min/5 min/continuous) Rapid traverse rate (m/min): 30 Main Spindle Max. spindle speed (rpm): 4,000 Spindle motor power (kW): 18.5/18.5/15 (25%ED/50%ED/continuous) Max. torque (Nm): 49 Sub-spindle Max. spindle speed (rpm): 5,000 Spindle motor power (kW): 11/7.5 (25%ED/continuous) Max. torque (Nm): 22 Sub-spindle travel (mm): 734 Cooling System Tank capacity (L): 366 Nodpfeyzxcgox Afxowg Equipment Chip conveyor Signal light Machine hours: Power-on hours: 19,393 Cutting hours: 8,800 Rated power (kVA): 48 Base Machine: Dimensions / Weight Length (mm): 5,330 Width (mm): 4,100 Height (mm): 2,395 Weight (kg): 8,360 Depicted tools, driven tools and both chucks are not included in the scope of delivery.

Būklė: naudotas, Gamybos metai: 2017, Technical details: Grinding diameter: 280/320 mm Grinding length: 750 mm Centre height: 170 mm Nedpfx Ajttxg Ssfxewg Machine weight approx.: 22.5 t Space requirements approx.: 4.7 x 3.65 x 3.0 m

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2018, veikimo valandos: 23 501 h, Funkcionalumas: visiškai funkcionalus, tekėjimo ilgis: 705 mm, tekėjimo skersmuo: 366 mm, ašies variklio galia: 18 W, veleno greitis (min.): 4 000 aps./min, veleno greitis (maks.): 10 000 aps./min, X ašies eiga: 260 mm, Y ašies eiga: 50 mm, Z ašies eigos atstumas: 795 mm, sukimosi greitis (maks.): 10 000 aps./min, bendras aukštis: 2 395 mm, bendras ilgis: 5 330 mm, bendras plotis: 4 100 mm, bendras svoris: 8 360 kg, CNC Control: Mitsubishi M730UM (CELOS - ERGOline Touch) Capabilities Travel X-axis mm: 260 Travel Y-axis mm: ±50 Travel Z-axis mm: 795 Turning length mm: 705 max. Turning diameter mm: ø 366 Swing over bed mm: ø 920 Swing over cross slide mm: 740 Bar capacity mm: 80 Tool Magazine Tool positions: 20 Tool holder: BMT40 Upper Turret Number of tool stations: 20 Max. speed driven tools rpm: 10,000 Nwodjywtwwspfx Afxeg Driven tool output kW: 5.5 / 4.9 / 4.2 (3 min/5 min/continuous) Rapid traverse rate: 30 Main Spindle Max. spindle speed rpm: 4,000 Spindle drive power kW: 18.5 / 18.5 / 15 (25% duty/50% duty/continuous) Max. torque Nm: 49 Sub Spindle Max. spindle speed rpm: 5,000 Spindle drive power kW: 11 / 7.5 (25% duty/continuous) Max. torque Nm: 22 Sub spindle travel mm: 734 Cooling System Tank capacity liters: 366 Equipment Electronic handwheel Chip conveyor Signal lamp High-pressure pump Touch probe Paper band filter Machine Hours: Power-on hours: 23,501 Cutting hours: 7,494 Rated power kVA: 48 Basic Machine: Dimensions / Weight Length mm: 5,330 Width mm: 4,100 Height mm: 2,395 Weight kg: 8,360

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2018, veikimo valandos: 23 501 h, Funkcionalumas: visiškai funkcionalus, sukimosi skersmuo virš skersinio stumduko: 740 mm, tekėjimo skersmuo: 920 mm, ašies variklio galia: 18 W, veleno greitis (maks.): 4 000 aps./min, X ašies eiga: 260 mm, Y ašies eiga: 50 mm, Z ašies eigos atstumas: 795 mm, frezos veleno ilgis: 91 mm, sukimosi greitis (maks.): 10 000 aps./min, bendras aukštis: 2 395 mm, bendras ilgis: 5 330 mm, bendras plotis: 4 100 mm, sūpynės skersmuo virš skersinio vežimo: 740 mm, veleno nosis: JIS A2-8, bendras svoris: 8 360 kg, CNC Control: Mitsubishi M730UM (CELOS - ERGOline Touch) Capabilities Travel X-axis mm: 260 Nedjwkf H Dspfx Afxjwg Travel Y-axis mm: ±50 Travel Z-axis mm: 795 Turning length mm: 705 Max. turning diameter mm: ø 366 Swing over bed mm: ø 920 Swing over cross slide mm: 740 Bar capacity mm: 80 Tool Magazine Number of tool positions: 20 Tool holder: BMT40 Upper Turret Number of tool positions: 20 Max. speed driven tools rpm: 10,000 Driven tool power kW: 5.5/4.9/4.2 (3 min/5 min/cont) Y-axis travel mm: 100 Rapid traverse rate: 30 Main Spindle Max. spindle speed rpm: 4,000 Spindle motor power kW: 18.5/18.5/15 (25%ED/50%ED/cont) Spindle bore mm: 91 Chuck type: Hollow chuck (Ø254 mm) BB210A821 Manufacturer: KITAGAWA Spindle nose: JIS A2-8 Max. torque Nm: 49 Sub-Spindle Max. spindle speed rpm: 5,000 Spindle motor power kW: 11/7.5 (25%ED/cont) Spindle bore mm: 73 Chuck type: Hollow chuck (Ø210 mm) BB208A621 Manufacturer: KITAGAWA Spindle nose: JIS A2-5 Max. torque Nm: 22 Sub-spindle travel mm: 734 Cooling system Tank volume liters: 366 Equipment Electronic handwheel Chip conveyor Signal lamp High-pressure pump Mist separator Work area light Dual foot switch for main and sub-spindle Coolant gun Measuring probe Paper band filter Preparation for robot operation Robot data - Fanuc - R-30iA / Type M-16iB/20 Availability of 10 pallets in the warehouse (10 slots) Clamping by robot: ø40 to 220mm x Height 20mm Max. weight per robot piece: 5.6kg Machine run time: Power-on hours: 23,501 Nominal power kVA: 48 Cutting time: 7,494 Base machine: Dimensions / Weight Length mm: 5,330 Width mm: 4,100 Height mm: 2,395 Weight kg: 8,360

Būklė: labai geros būklės (naudotas), Gamybos metai: 2010, Funkcionalumas: visiškai funkcionalus, matavimo diapazonas X ašis: 400 mm, matavimo diapazonas Y ašis: 400 mm, matavimo diapazonas Z ašis: 200 mm, ruošinio svoris (maks.): 25 kg, garantijos trukmė: 12 mėnesiai, įėjimo įtampa: 230 V, paskutinio kapitalinio remonto metai: 2025, Įranga: Tipinė plokštelė prieinama, apšvietimas, dokumentacija / vadovas, Multisensor coordinate measuring center in excellent condition with warranty and guarantee, offering comprehensive services. Regularly maintained. Nodpfxedyc Uao Afxjwg Hexagon Optiv 442 multisensor measuring machine equipped with camera, laser, and Renishaw probing system. • Measuring range (single sensor): 410 x 410 x 200 mm • Dimensions: 1232 x 910 x 1663 mm • Weight: approx. 940 kg • Max. load on glass plate: 30 kg • Accuracies: U1 = 1.9 + L/200; U2 = 2.4 + L/150; U3 = 2.9 + L/100 (L = measuring length in mm) • Max. travel speed per axis: 200 mm/s • Includes camera with 2-stage zoom • Includes laser • Includes LED ring light • Includes Renishaw 6-fold probe changer • Includes Renishaw TP200 probing system • Includes new frame grabber (Eagle) • Includes dual-monitor operation • Includes Windows 10 evaluation station • Optional: transport, commissioning, and calibration included on request.

Būklė: naudotas, TECHNICAL DATA - Number of axes: 6 - Number of spindles: 2 - Number of turrets: 1 MAIN SPINDLE Nwodpfox H Atyox Afxeg - Spindle nose: A2-8" - Spindle drive power: 18.5 kW - Spindle speed: 4000 rpm - Max. bar capacity: 90 mm - Max. machining diameter: 460 mm - Minimum C-axis resolution: 0.001° SUB SPINDLE - Spindle nose: A2-6" - Spindle drive power: 11 kW - Spindle speed: 6000 rpm - Minimum C-axis resolution: 0.001° TURRET 1 - Number of positions: 12 - Number of driven positions: 12 - Travel X/Z: 260/795 mm - Y-axis travel: +/-50 mm - Tool type: BMT - Driven tool speed: 10,000 rpm - Driven tool power: 5.5 kW ELECTRICAL SUPPLY - Supply voltage: 400 V - Total installed power: 41 kW MACHINE HOURS - Power-on hours: 21,392.8 h - Operating hours: 13,797 h EQUIPMENT - Control: CELOS - Interfaces: Ethernet / RS232 / USB / PCMCIA - Teach-in programming: MAPPS V - 3-color status tower - Coolant tank: KNOLL * with high-pressure pump: 70 bar * with paper filter - Tailstock option with sub spindle - Chip conveyor - Tool probe - Parts catcher - Parts conveyor belt - Bar feeder: LNS QUICKLOAD - Electrical transformer - Number of driven tool holders: 2 - Number of stationary tool holders: 10 - Collet chuck