CNC tekinimo ir frezavimo centras

DMG MORI NLX 2500 SY / 700

Būklė: naudotas, Gamybos metai: 2018, Maximum turning diameter: 356 mm Turning length: 705 mm Control: M730 UM Mapps CELOS Swing diameter over bed: 920 mm Swing diameter over cross slide: 742 mm Spindle speed range – main spindle: 4,000 rpm Drive power – main spindle: 18.5 / 15 kW Spindle nose: JIS A2-8 Spindle bore: 80 (91) mm C-axis: 0.001° Spindle speed range – sub spindle: 6,000 rpm Drive power – sub spindle: 11 / 7.5 kW Spindle bore: 43 mm Dsdpfxsvy Ig He Ai Sekn C-axis: 0.001° X-travel: 260 mm Z-travel: 795 mm Y-axis: +/-50 mm Rapid traverse (X / Y / Z): 30 / 10 / 30 m/min Number of tool stations: 12 positions Square tool shank height: 25 mm Drill shank diameter: 50 mm Turret indexing time: 0.27 sec Speed range – driven tools max.: 10,000 rpm Drive power – driven tools: 5.5 / 4.2 kW Total connected load: 41 kVA Machine weight approx.: 6.4 t Installation dimensions approx.: 5.0 x 3.0 x 2.3 m CNC turning and milling center DMG MORI – NLX 2500 SY / 700 - Sub spindle - Driven tools - C and Y axis

Būklė: naudotas, Gamybos metai: 2021, veikimo valandos: 28 000 h, Funkcionalumas: visiškai funkcionalus, ruošinio svoris (maks.): 80 kg, šlifavimo disko skersmuo: 508 mm, ruošinio svoris tarp centrų: 80 000 g, atstumas tarp centrų: 800 mm, šlifavimo ratuko plotis: 80 mm, veleno greitis (maks.): 1 000 aps./min, padavimo ilgis X ašis: 370 mm, padavimo ilgis Z ašis: 800 mm, X ašies padavimo greitis: 15 000 m/min, padavimo greitis Z ašis: 7 500 m/min, bendras svoris: 7 250 kg, įėjimo dažnis: 50 Hz, įėjimo įtampa: 400 V, Siūlome naudotą 2021 metų STUDER favorit_1044 cilindrinio šlifavimo staklę. Tipas: favorit_1044 Serijos Nr.: 1044- Modelio metai: 2021 Įtampa: 400 V Dksdjylld Dspfx Ai Son Dažnis: 50 Hz Svoris: 7 250 kg Jei turite klausimų arba reikia daugiau informacijos, prašome parašyti mums žinutę arba paskambinti.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2012, veikimo valandos: 10 168 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: NL254120635, CNC tekinimo staklės Gamintojas: DMG MORI Tipas: NLX 2500 SY 700 su WH10 automatizacija Pagaminimo metai: 2012 Dkjdpfx Aoy Szwhei Sjn Tekinimo skersmuo: 460 mm Tekinimo ilgis: 795 mm Valdymas: MORI SEIKI M730 BM Apsisukimo skersmuo virš stalčiaus: 590/360 mm Veleno pratekėjimas: 80 mm Poslinkiai X/Z: 260/795 mm Bendras galios poreikis: 40 kVA Staklių svoris: apie 6,4 t Užimama vieta: apie 3.994 x 3.056 x 2.187 m

Būklė: labai geros būklės (naudotas), Gamybos metai: 2015, veikimo valandos: 6 147 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 7023000088B, Type of machine: CNC Turning and Milling Centre Manufacturer: DMG MORI Model: NLX2500SY/700 Year of manufacture: 2015 Control system: M730 UM Mapps CELOS Country of origin: Japan Delivery time: by arrangement Delivery terms: ex works Additional information: CNC Turning and Milling Centre DMG MORI NLX2500SY/700 Max. turning diameter: 356 mm Turning length: 705 mm Control: M730 UM Mapps CELOS Swing diameter over bed: 920 mm Swing diameter over cross slide: 742 mm Spindle speed range – main spindle: 4,000 rpm Drive power – main spindle: 18.5 / 15 kW Spindle nose: JIS A2-8 Spindle bore: 80 (91) mm C-axis: 0.001° Speed range – sub spindle: 6,000 rpm Drive power – sub spindle: 11 / 7.5 kW Sub spindle bore: 43 mm Dkjdpey Sxukefx Ai Sjn C-axis: 0.001° X-axis travel: 260 mm Z-axis travel: 795 mm Y-axis travel: +/- 50 mm Rapid traverse (X / Y / Z): 30 / 10 / 30 m/min Number of tool stations: 12 positions Shank height for square tool: 25 mm Drill shank diameter: 50 mm Turret indexing time: 0.27 sec. Speed range – driven tools max.: 10,000 rpm Drive power – driven tools: 5.5 / 4.2 kW Total power requirement: 41 kVA Machine weight approx.: 6.4 t Space requirement approx.: 5.0 x 3.0 x 2.3 m CNC Turning and Milling Centre DMG MORI - NLX 2500 SY / 700 - Sub spindle - Driven tools - C, Y axis

Būklė: naudotas, Gamybos metai: 1996, Verpstuvo praėjimo skersmuo: 80 mm Maks. tekinimo skersmuo: 395 mm Maks. tekinimo ilgis: 750 mm Valdymo sistema: TX 8H Maks. verpstuvo apsisukimų skaičius: 3.150 aps./min. CNC tekinimo staklės | TRAUB - TNA 400 Dsdoxbtqvopfx Ai Sokn Staklės yra gerai prižiūrėtos būklės.

Būklė: naudotas, Gamybos metai: 2017, Technical details: Turning diameter: 356 mm Turning length: 705 mm Control: CELOS M730 UM MAPPS Swing diameter: 742 mm Standard turning diameter: 275 mm Travel - X axis: 260 mm Travel - Y axis: 100 (±50) mm Travel - Z axis: 795 mm Rapid traverse - longitudinal/plan: 30 / 30 m/min Rapid traverse B axis (sub-spindle part transfer): 734 m/min Spindle 1 speed: 4000 rpm Spindle 1 power: 15/18.5/18.5 kW Spindle 1 torque: 409/505/599 Nm Spindle 1 max. bar diameter: 80 mm Spindle 2 speed: 4500 rpm Spindle 2 power: 7.5/11 kW Turret stations / driven stations: 20 / 20 BMT40 Driven tool speed: 10,000 rpm Driven tool drive power: 3.7/5.5/5.5 kW Driven tool torque: 14 / 24 Nm Total power requirement: 38 kVA Machine weight approx.: 6.3 t Space requirements approx.: 4 (9) x 2.1 x 2.2 m Equipment: Chip conveyor Bar feeder interface Dkodpsyxpv Ssfx Ai Ssn Parts catcher spindle 1 and spindle 2 Workpiece and total piece counter Three-color signal lamp Spindle 1 power chuck Kitagawa B 210 (250 mm) Spindle 2 power chuck Kitagawa B 206 (160 mm) Parts outfeed conveyor Automatic door Interface for internal coolant supply Internal coolant supply 70 bar, Knoll Program restart Presetting device spindle 1 & 2 Coolant shower 1m short bar loader magazine IRCO High-performance precision turning center with Y-axis and counter spindle. Perfectly suited for machining complex turned parts with off-center milling operations. Easy programming of the machine via CELOS-MAPPS 4 dialog control. Machine can be demonstrated under power and with chips. Very few operating hours. All available (driven) tool holders included. IRCO Simag bar loader included.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2018, veikimo valandos: 23 501 h, Funkcionalumas: visiškai funkcionalus, tekėjimo ilgis: 705 mm, tekėjimo skersmuo: 366 mm, ašies variklio galia: 18 W, veleno greitis (min.): 4 000 aps./min, veleno greitis (maks.): 10 000 aps./min, X ašies eiga: 260 mm, Y ašies eiga: 50 mm, Z ašies eigos atstumas: 795 mm, sukimosi greitis (maks.): 10 000 aps./min, bendras aukštis: 2 395 mm, bendras ilgis: 5 330 mm, bendras plotis: 4 100 mm, bendras svoris: 8 360 kg, CNC Control: Mitsubishi M730UM (CELOS - ERGOline Touch) Capabilities Travel X-axis mm: 260 Travel Y-axis mm: ±50 Travel Z-axis mm: 795 Turning length mm: 705 max. Turning diameter mm: ø 366 Swing over bed mm: ø 920 Swing over cross slide mm: 740 Bar capacity mm: 80 Tool Magazine Tool positions: 20 Tool holder: BMT40 Upper Turret Number of tool stations: 20 Max. speed driven tools rpm: 10,000 Driven tool output kW: 5.5 / 4.9 / 4.2 (3 min/5 min/continuous) Rapid traverse rate: 30 Main Spindle Max. spindle speed rpm: 4,000 Spindle drive power kW: 18.5 / 18.5 / 15 (25% duty/50% duty/continuous) Max. torque Nm: 49 Sub Spindle Max. spindle speed rpm: 5,000 Spindle drive power kW: 11 / 7.5 (25% duty/continuous) Max. torque Nm: 22 Sub spindle travel mm: 734 Cooling System Tank capacity liters: 366 Equipment Electronic handwheel Dedpfsywtwwsx Ai Sekn Chip conveyor Signal lamp High-pressure pump Touch probe Paper band filter Machine Hours: Power-on hours: 23,501 Cutting hours: 7,494 Rated power kVA: 48 Basic Machine: Dimensions / Weight Length mm: 5,330 Width mm: 4,100 Height mm: 2,395 Weight kg: 8,360

Būklė: geras (naudotas), Gamybos metai: 2007, Naudojamas OKUMA tekinimo staklės - Modelis: LT200-M TwinStar - Gamybos metai: 2007 - su drožlių transporteriu Dkjdpfx Aijv S Svvj Ssn - aušinimo skysčio baku - iš karto prieinama

Būklė: geras (naudotas), Gamybos metai: 2017, veikimo valandos: 8 800 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: NL2561708843, ašies skaičius: 2, CNC Control: Mitsubishi M730UM (CELOS - ERGOline Touch) Capabilities Travel X-axis (mm): 260 Travel Y-axis (mm): ±50 Travel Z-axis (mm): 795 Turning length (mm): 705 Max. Turning diameter (mm): ø 366 Swing over bed (mm): ø 920 Swing over cross slide (mm): 740 Bar capacity (mm): 80 Tool Magazine Tool stations: 20 Tool holder: BMT40 Max. speed driven tools (rpm): 10,000 Driven tools power (kW): 5.5/4.9/4.2 (3 min/5 min/continuous) Rapid traverse rate (m/min): 30 Main Spindle Max. spindle speed (rpm): 4,000 Spindle motor power (kW): 18.5/18.5/15 (25%ED/50%ED/continuous) Max. torque (Nm): 49 Sub-spindle Max. spindle speed (rpm): 5,000 Spindle motor power (kW): 11/7.5 (25%ED/continuous) Max. torque (Nm): 22 Sub-spindle travel (mm): 734 Cooling System Tank capacity (L): 366 Equipment Dodpfjyzxcgsx Ai Sokn Chip conveyor Signal light Machine hours: Power-on hours: 19,393 Cutting hours: 8,800 Rated power (kVA): 48 Base Machine: Dimensions / Weight Length (mm): 5,330 Width (mm): 4,100 Height (mm): 2,395 Weight (kg): 8,360 Depicted tools, driven tools and both chucks are not included in the scope of delivery.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2018, veikimo valandos: 23 501 h, Funkcionalumas: visiškai funkcionalus, sukimosi skersmuo virš skersinio stumduko: 740 mm, tekėjimo skersmuo: 920 mm, ašies variklio galia: 18 W, veleno greitis (maks.): 4 000 aps./min, X ašies eiga: 260 mm, Y ašies eiga: 50 mm, Z ašies eigos atstumas: 795 mm, frezos veleno ilgis: 91 mm, sukimosi greitis (maks.): 10 000 aps./min, bendras aukštis: 2 395 mm, bendras ilgis: 5 330 mm, bendras plotis: 4 100 mm, sūpynės skersmuo virš skersinio vežimo: 740 mm, veleno nosis: JIS A2-8, bendras svoris: 8 360 kg, CNC Control: Mitsubishi M730UM (CELOS - ERGOline Touch) Capabilities Travel X-axis mm: 260 Travel Y-axis mm: ±50 Travel Z-axis mm: 795 Turning length mm: 705 Max. turning diameter mm: ø 366 Swing over bed mm: ø 920 Swing over cross slide mm: 740 Bar capacity mm: 80 Tool Magazine Number of tool positions: 20 Tool holder: BMT40 Upper Turret Number of tool positions: 20 Max. speed driven tools rpm: 10,000 Driven tool power kW: 5.5/4.9/4.2 (3 min/5 min/cont) Y-axis travel mm: 100 Rapid traverse rate: 30 Main Spindle Max. spindle speed rpm: 4,000 Spindle motor power kW: 18.5/18.5/15 (25%ED/50%ED/cont) Spindle bore mm: 91 Chuck type: Hollow chuck (Ø254 mm) BB210A821 Manufacturer: KITAGAWA Spindle nose: JIS A2-8 Max. torque Nm: 49 Sub-Spindle Max. spindle speed rpm: 5,000 Spindle motor power kW: 11/7.5 (25%ED/cont) Spindle bore mm: 73 Chuck type: Hollow chuck (Ø210 mm) BB208A621 Manufacturer: KITAGAWA Spindle nose: JIS A2-5 Max. torque Nm: 22 Sub-spindle travel mm: 734 Cooling system Tank volume liters: 366 Equipment Electronic handwheel Chip conveyor Signal lamp High-pressure pump Mist separator Dodpfxewkf H De Ai Sskn Work area light Dual foot switch for main and sub-spindle Coolant gun Measuring probe Paper band filter Preparation for robot operation Robot data - Fanuc - R-30iA / Type M-16iB/20 Availability of 10 pallets in the warehouse (10 slots) Clamping by robot: ø40 to 220mm x Height 20mm Max. weight per robot piece: 5.6kg Machine run time: Power-on hours: 23,501 Nominal power kVA: 48 Cutting time: 7,494 Base machine: Dimensions / Weight Length mm: 5,330 Width mm: 4,100 Height mm: 2,395 Weight kg: 8,360

Būklė: labai geros būklės (naudotas), Gamybos metai: 2016, Inca Onset X2, 3/4 automatisiert Farbkonfiguration: 8-Kanal-Drucker mit vier Farben (CMYK) Nur 1/12 des Neupreises!!!!! Druckkopfstatus erlaubt das Drucken mit maximaler Geschwindigkeit und herausragender Qualität – bis zu 140 Bögen pro Stunde/700 m² pro Stunde, es müssen 60 Köpfe ersetzt werden (ca. 45.000 €). Djdpfx Aeun Swbji Sskn Die Maschine befindet sich in ausgezeichnetem Zustand und wurde seit dem ersten Tag durch den Hersteller gewartet. Die jährliche Wartung wurde im Mai 2025 durchgeführt. Verfügbar: Januar 2026 Mit wachsendem Geschäftsvolumen bietet die Onset X2 die Möglichkeit, das Anwendungsportfolio zu erweitern. Durch ein zweites CMYK-Set wird die Produktivität weiter gesteigert – bis zu 707 m²/h* (entspricht 138 Bögen vollformatig pro Stunde). Optional können sechs Kanäle mit Light Cyan (Lc), Light Magenta (Lm), Weiß (W) und Orange (O) belegt werden, um maximale Flexibilität und erstklassige Druckqualität zu gewährleisten. Je nach Anforderung können uni-direktionale, bi-direktionale oder Super-High-Quality-Druckmodi gewählt werden. * Basierend auf einer ungefähren Materialhandhabungszeit von 6 Sekunden. Demontage, Transport, Installation, Schulung und Gewährleistung sind innerhalb Europas im Preis enthalten. Für weitere technische Details verweisen wir auf das beigefügte Datenblatt.

Būklė: naudotas, TECHNICAL DATA - Number of axes: 6 - Number of spindles: 2 - Number of turrets: 1 MAIN SPINDLE - Spindle nose: A2-8" - Spindle drive power: 18.5 kW - Spindle speed: 4000 rpm - Max. bar capacity: 90 mm - Max. machining diameter: 460 mm Dsdpex H Atysfx Ai Sokn - Minimum C-axis resolution: 0.001° SUB SPINDLE - Spindle nose: A2-6" - Spindle drive power: 11 kW - Spindle speed: 6000 rpm - Minimum C-axis resolution: 0.001° TURRET 1 - Number of positions: 12 - Number of driven positions: 12 - Travel X/Z: 260/795 mm - Y-axis travel: +/-50 mm - Tool type: BMT - Driven tool speed: 10,000 rpm - Driven tool power: 5.5 kW ELECTRICAL SUPPLY - Supply voltage: 400 V - Total installed power: 41 kW MACHINE HOURS - Power-on hours: 21,392.8 h - Operating hours: 13,797 h EQUIPMENT - Control: CELOS - Interfaces: Ethernet / RS232 / USB / PCMCIA - Teach-in programming: MAPPS V - 3-color status tower - Coolant tank: KNOLL * with high-pressure pump: 70 bar * with paper filter - Tailstock option with sub spindle - Chip conveyor - Tool probe - Parts catcher - Parts conveyor belt - Bar feeder: LNS QUICKLOAD - Electrical transformer - Number of driven tool holders: 2 - Number of stationary tool holders: 10 - Collet chuck