CNC tekinimo ir frezavimo centras

DMG MORI NLX 2500/700

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2022, veleno greitis (maks.): 4 000 aps./min, Šios DMG MORI NLX 2500Y 700 staklės pagamintos 2022 m. Tai tvirtos horizontalios tekinimo staklės, idealiai tinkančios tiksliam apdirbimui. Apsvarstykite galimybę įsigyti šias DMG MORI NLX 2500Y 700 horizontalios tekinimo stakles. Norėdami gauti daugiau informacijos, susisiekite su mumis. Mašinos privalumai Kokybiškos mašinos privalumai • 4 spalvų lempa • Automatinės durys • Roboto sąsaja • Strypų tiektuvo sąsaja • 10 m kodai • Oro pūstuvas Isdpoyalm Isfx Af Ieht Techninės mašinos privalumai • Apsisukimo ilgis 705 mm • Y ašis • Tiesioginiai įrankiai • 12 pozicijų bokštelis su 10000 aps. /min. • Šarnyrinis drožlių konvejeris • Aukšto slėgio aušinimo skystis • Rankinis išankstinis nustatymas • Kitagawa br 10 savaime centruojantis • Asa 8 colių velenas su 91 kiauryme

Gamybos metai: 2002, Sąlyga: dilaminuotas dirbtuvėje (naudotas), Cutting, Drilling, and Marking Line for Beams CIRCULAR SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year: 2002 Serial number: 122.400 Weight without accessories: 10,980 kg - Down-cut circular saw. - Saw unit with gearbox, drive system, and saw blade mounted on a heavy-duty, wear-resistant swivel bearing. - Heavy-duty saw gearbox with helical teeth, hardened and ground, lubricated in oil bath. - Hydraulic saw blade feed, adjustable by setting chart, with very fast return stroke. - Horizontal hydraulic clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic return limitation. - Vertical clamping block with self-adjusting pressure plate. - Bevel cutting device for setting angles from 45° left to 35° right. - Material sensor for automatic change from rapid to working feed. - Hydraulically liftable feed roller for optimal material transport on the saw table. - Economical lubrication via micro-dosing system, especially suitable for cutting profiles. - Chip collector mounted on the machine bed. Specifications: - Saw blade holder: 100x4x30x250mm - Saw blade diameter: 1,430mm - Cutting width: 9.5mm Ihedehzbipjpfx Af Ijt - Cutting speed: 10 to 20m/min - Saw feed speed: 0-400mm/min - Rapid return speed: 2,000mm/min - Total power: 25KW - Working height: 640mm Cutting capacities: At 90° - Angle steel: 250mm - U-beam: 400mm - Double T-beam: 600mm - Wide flange beam: 1008x302mm - Special flange beams: 1000x450mm Miter cutting: IPBv Beam - 75°: 1008x302mm - 60°: 910x302mm - 45°: 716x304mm - 40°: 716x304mm - 35°: 478x307mm IPBs Beam - 75°: 1008x402mm - 45°: 524x357mm IPE Beam - 45°: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX 1215 Serial number: 122.401 Working capacities: - Angle steel (min - max): 80x65x10mm - 250x250x28mm - U-beam (min - max): 80x45mm - 400x110mm - Double T-beam (min - max): 80x46mm - 600x220mm - Wide flange beam (min - max): 100x100mm - 1,008x302mm - Extra-wide flange beams: 1,200x500mm Number of drilling units: 3 - Vertical (Y axis) 1 unit - Horizontal (Z and W axes) 2 units Drilling diameters: 8-40mm RPM: 150 - 1,100 Rapid feed / Rapid return: 3,850mm/min - 8,000mm/min Spindle feed rate: 0-500mm/min Spindle rapid positioning: 15,000mm/min Automatic tool changer: 5 tools per unit (total 15 positions) Total power: 45KW MARKING UNIT FEEDING: 26 METERS INFEED WITH BEAM FEEDER + 6 SIDE ARMS FOR PARALLEL BEAM FEEDING TO ROLLER CONVEYORS 30 METERS OUTFEED ROLLER CONVEYORS + 6 SIDE ARMS 4 SIDE ARMS FOR SMALL SECTIONS MOST ROLLERS ARE MOTORIZED Approximate total installation length: 60 linear meters from infeed to outfeed. *Installation layout available upon request.

Gamybos metai: 2012, veikimo valandos: 6 500 h, Sąlyga: paruoštas naudoti (naudotas), Pagrindinis variklis Ašių skaičius: 3 Media Drožlių transporteris: Taip Papildoma įranga KITAGAWA skersinio prakišimo griebtuvėlis su KITAGAWA SS1881K21 pagrindiniam velenui 15 barų siurblys su filtru Aušinimo sistema su padidintu slėgiu (5 barai) Hinginis juostinis transporteris, išmetimas dešinėje pusėje Integruotas detalių gaudyklė pagrindiniam velenui Juostos padavimo sąsaja, LNS Dvigubas kojinis jungiklis su apsauginiu dangteliu Signalinė lemputė (raudona, geltona, žalia) Įrankių iškyšos ilgis: 100 mm Y ašies važiuoklei + įrankių laikiklių paketas Transformatorius 45000 VA Šis 3 ašių DMG Mori Seiki NLX2500Y 700 pagamintas 2012 metais. Įrengtas KITAGAWA skersinio prakišimo griebtuvėliu, padidinto slėgio (5 barai) aušinimo sistema ir integruota detalių gaudykle. Papildomos savybės: hinginis juostinis transporteris, sąsaja juostos padavimui ir signalinė šviesų sistema. Puikiai tinka tekinimo-frezavimo operacijoms. Pasinaudokite proga įsigyti šį DMG Mori Seiki NLX2500Y 700 horizontalų tekinimo staklę. Susisiekite su mumis dėl išsamesnės informacijos apie šį įrenginį. Isdpfx Ajx D D Uwef Ieht Pritaikymo tipai Tekinimas

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2023, veikimo valandos: 3 751 h, Funkcionalumas: visiškai funkcionalus, tekėjimo ilgis: 700 mm, tekėjimo skersmuo: 356 mm, veleno greitis (min.): 6 000 aps./min, veleno skylė: 81 mm, X ašies eiga: 260 mm, Y ašies eiga: 100 mm, Z ašies eigos atstumas: 795 mm, DMG MORI NLX2500/700 universalus tekinimo staklės su Y ašimi, strypų padavėju ir varomais įrankiais. Pagrindinis ir priešpriešinis velenas. Veleno kiaurymės skersmuo: 81 mm. Papildomai galima įsigyti kartu su staklėmis įsigytą 60 000 € vertės įrankių paketą. Ihsdpfx Aox Sp Izjf Iot

Sąlyga: geras (naudotas), Gamybos metai: 2019, Funkcionalumas: visiškai funkcionalus, matavimo diapazonas X ašis: 500 mm, matavimo diapazonas Y ašis: 700 mm, matavimo diapazonas Z ašis: 500 mm, garantijos trukmė: 12 mėnesiai, Įranga: dokumentacija / vadovas, PRISTATYMAS TIK JK Global S Green 05.07.05 HH-AS6-T5, 5° automatinė sukamų padėčių galvutė HP-TM prisilietimo daviklis (zondas) Standartinių stilusų komplektas PC-DMIS matavimo programinė įranga Pagaminimo metai: 2019 Dėl alternatyvių konfigūracijų prašome susisiekti su mumis. Matavimo diapazonas: X 500 mm, Y 700 mm, Z 500 mm MPE(E0/E150) (18°C – 22°C): 1,5 + L/333 Isdpou Snthsfx Af Ioht

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2011, veikimo valandos: 9 080 h, Funkcionalumas: visiškai funkcionalus, For sale: Well-maintained CNC turning and milling center DMG Mori Seiki NLX 2500 SY/700, year of manufacture 2011, equipped with a Mitsubishi 730 BM control unit! Only approx. 9,000 machining hours! Travels X-axis: 260 mm Y-axis: 100 mm Z-axis: 795 mm Features and accessories: - Tool turret: 12 stations, all driven - Speed of driven tools: max. 10,000 rpm - Parts catcher Ihedpfx Afjxzqhrs Ist - Mains connection: 400 V - Power consumption: 37.6 kVA - Internal cooling system - Main spindle chuck: Kitagawa BB210AB - Sub spindle chuck: Kitagawa B206A521F - Turning diameter: 366 mm - Turning length: 705 mm - Bar capacity: 80 mm - Main spindle max. speed: 4,000 rpm, with three-jaw chuck - Power: 18.5 kW - Sub spindle max. speed: 6,000 rpm, with three-jaw chuck - Chip conveyor - Tool measuring system in the work area - Manual measuring arm deployable for the sub spindle - Short bar loader, manufacturer: LNS - Including tools: 8 fixed tools, 3 driven tools - Including extraction system, make: Indusa - Complete documentation included Machine is immediately available! The machine is fully cleaned and inspected! We will load the machine for you! Transport can be arranged upon request!

Sąlyga: naudotas, TECHNICAL DATA - Number of axes: 6 - Number of spindles: 2 - Number of turrets: 1 MAIN SPINDLE - Spindle nose: A2-8" - Spindle drive power: 18.5 kW - Spindle speed: 4000 rpm - Max. bar capacity: 90 mm - Max. machining diameter: 460 mm - Minimum C-axis resolution: 0.001° SUB SPINDLE - Spindle nose: A2-6" - Spindle drive power: 11 kW - Spindle speed: 6000 rpm - Minimum C-axis resolution: 0.001° TURRET 1 - Number of positions: 12 Ihedpfxox H Atye Af Ijt - Number of driven positions: 12 - Travel X/Z: 260/795 mm - Y-axis travel: +/-50 mm - Tool type: BMT - Driven tool speed: 10,000 rpm - Driven tool power: 5.5 kW ELECTRICAL SUPPLY - Supply voltage: 400 V - Total installed power: 41 kW MACHINE HOURS - Power-on hours: 21,392.8 h - Operating hours: 13,797 h EQUIPMENT - Control: CELOS - Interfaces: Ethernet / RS232 / USB / PCMCIA - Teach-in programming: MAPPS V - 3-color status tower - Coolant tank: KNOLL * with high-pressure pump: 70 bar * with paper filter - Tailstock option with sub spindle - Chip conveyor - Tool probe - Parts catcher - Parts conveyor belt - Bar feeder: LNS QUICKLOAD - Electrical transformer - Number of driven tool holders: 2 - Number of stationary tool holders: 10 - Collet chuck

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2012, X ašies eiga: 2 600 mm, Y ašies eiga: 700 mm, Z ašies eigos atstumas: 700 mm, greitas poslinkis X ašimi: 40 000 m/min, greitas poslinkis Y ašis: 40 000 m/min, greitasis eiga Z ašyje: 40 000 m/min, stalo plotis: 750 mm, stalo ilgis: 2 900 mm, stalo apkrova: 2 150 kg, 5-Axis Machining Center DMG MORI - DMF 260-7 X-axis travel: 2600 mm Y-axis travel: 700 mm Z-axis travel: 700 mm Ihjdpfx Ajxuqv Ajf Ist A-axis travel: 360,000° B-axis travel: -110 to +110° Table length: 2900 mm Table width: 750 mm Table load capacity: 2150 kg Table diameter Ø: 750 mm Feed rate X-axis: 40,000 mm/min Feed rate Y-axis: 40,000 mm/min Feed rate Z-axis: 40,000 mm/min Tool holder: 40 ISO/BT/MK Spindle power: 35 kW Spindle speed: 18,000 rpm Tool changer: 30 positions Internal coolant supply (IKZ): 20 bar Number of controlled axes: 5 Chip conveyor: Yes Coolant unit: Yes Length: 8,400 mm Width: 3,423 mm Height: 2,620 mm Weight: 16,000 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is provided in good faith, but accuracy cannot be guaranteed. Accordingly, this information does not constitute any representation or contractual terms. We recommend verifying all important details.

Sąlyga: naudotas, Gamybos metai: 2017, Maksimalus tekinimo skersmuo 356 mm Tekinimo ilgis 705 mm Valdymas M730 UM Mapps CELOS Apsisukimų skersmuo virš staklių lovos 920 mm Apsisukimų skersmuo virš skersinio vežimo 742 mm Pagrindinio veleno sūkių diapazonas 4 000 min⁻¹ Pagrindinio veleno pavaros galia 18,5 / 15 kW Veleno nosis JIS A2-8 Veleno kiaurymė 80 (91) mm C ašis 0,001° Priešpriešinio veleno sūkių diapazonas 6 000 min⁻¹ Priešpriešinio veleno pavaros galia 11 / 7,5 kW Priešpriešinio veleno kiaurymė 43 mm Ihsdpsxzk Ifefx Af Iot C ašis 0,001° X eiga 260 mm Z eiga 795 mm Y ašis +/-50 mm Greitasis judėjimas (X / Y / Z) 30 / 10 / 30 m/min Įrankių vietų skaičius 12 vnt. Keturkampio įrankio kotelio aukštis 25 mm Grąžto kotelio skersmuo 50 mm Būgno keitimo laikas 0,27 sek. Varomų įrankių sūkių diapazonas maks. 10 000 min⁻¹ Varomų įrankių pavaros galia 5,5 / 4,2 kW Bendras energijos poreikis 41 kVA Staklių svoris apie 6,4 t Apsaugos plotas apie 4,0 x 3,0 x 2,3 m CNC tekinimo ir frezavimo centras DMG MORI - NLX 2500 SY / 700 - Priešpriešinis velenas - Varomieji įrankiai - C, Y ašys - Tik 1.237 veleno valandų

Sąlyga: naudotas, Gamybos metai: 2014, Maximum turning diameter: 366 mm Turning length: 705 mm Control system: M 730 BM MAPPS IV Swing diameter over bed: 920 mm Swing diameter over cross slide: 742 mm Main spindle speed range: 4,000 rpm Main spindle drive power: 18.5 / 15 kW Spindle nose: JIS A-8 Spindle bearing diameter: 140 mm Spindle bore: 91 mm Max. usable bar diameter: 80 mm Chuck diameter: 250 mm Sub-spindle speed range: 6,000 rpm Sub-spindle drive power: 11 / 7.5 kW Spindle nose: JIS A2-5 Spindle bearing diameter: 85 mm Spindle bore: 43 mm Max. usable bar diameter (–): mm Chuck diameter: 170 mm Isdpou Hq Rlofx Af Ieht X-axis travel: 260 mm Z-axis travel: 795 mm Y-axis: +/- 50 mm Rapid traverse (X / Y / Z): 30 / 10 / 30 m/min Number of tool stations: 12 positions Tool holder: BMT 60 Square tool height: 25 mm Drill shank diameter: 50 mm Turret indexing time: 0.27 sec. Driven tool speed range max.: 10,000 rpm Driven tool drive power: 5.5 / 3.7 kW Total power requirement: 40 kVA Machine weight approx.: 6.4 t Space requirement approx.: 5.0 x 3.0 x 2.3 m CNC Turning and Milling Center DMG MORI - NLX 2500 SY / 700 - Main and sub-spindle - C-axis - Y-axis - Driven tools

Sąlyga: naudotas, Gamybos metai: 2009, Offered here is a used machining centre from the manufacturer Deckel Maho DMG. The machine is under power and can be inspected in our facility. Free loading onto truck Manufacturer: DMG Deckel Maho Model: DMC 125 H duoBlock Year of manufacture: 2009 Control system: Siemens 840 D Solutionline (PCU 50) Technical data: Travel X-, Y-, Z-axis: 1250 x 1000 x 1000 mm Feed rate X-, Y-, Z-axis: 20 - 60,000 mm/min Rapid traverse X-, Y-, Z-axis: 60 m/min B-axis travel: 360 x 0.001° B-axis feed rate: 10,800 °/min Maximum table rotation: 30 rpm Spindle speed: 20 - 8,000 rpm Gear steps: 2 Maximum workpiece diameter: 1250 mm Maximum workpiece height: 1580 mm Clamping surface: 800 x 800 mm Maximum workpiece weight: 1,500 kg Pallet weight: 570 kg Maximum allowable pallet load difference: 1,000 kg Tool holder: SK 50 according to DIN 69871 Maximum tool length: 650 mm Tool magazine: 120 positions Transport dimensions: 6,500 x 3,000 x 3,200 mm Transport weight of the machine (without magazine or other accessories): approx. 20,000 kg Ijdpfxow Ew T Se Af Isht Space requirement: approx. 7,000 x 6,000 mm Total machine weight: 24,000 kg Accessories: Chip conveyor with coolant tank Coolant system 4x machine pallets Tool magazine Oil mist extraction system Various new spare parts: 1x Length measuring system Y-axis (new) 1x Lubrication unit 230V 0.12 30bar (new) 1x GEAR UNIT P-AGG*MKF1-KW2-20036 (new) 1x Cyclo gearbox*F1C-A25 (new) 1x Retrofit kit power module (new) 1x Lifting devices for the machine

Sąlyga: naudotas, Gamybos metai: 2018, Maximum turning diameter: 356 mm Turning length: 705 mm Control: M730 UM Mapps CELOS Swing diameter over bed: 920 mm Swing diameter over cross slide: 742 mm Spindle speed range – main spindle: 4,000 rpm Drive power – main spindle: 18.5 / 15 kW Spindle nose: JIS A2-8 Spindle bore: 80 (91) mm C-axis: 0.001° Spindle speed range – sub spindle: 6,000 rpm Drive power – sub spindle: 11 / 7.5 kW Spindle bore: 43 mm C-axis: 0.001° X-travel: 260 mm Z-travel: 795 mm Y-axis: +/-50 mm Rapid traverse (X / Y / Z): 30 / 10 / 30 m/min Number of tool stations: 12 positions Square tool shank height: 25 mm Drill shank diameter: 50 mm Ihsdpfx Afjvy Ig Ho Iot Turret indexing time: 0.27 sec Speed range – driven tools max.: 10,000 rpm Drive power – driven tools: 5.5 / 4.2 kW Total connected load: 41 kVA Machine weight approx.: 6.4 t Installation dimensions approx.: 5.0 x 3.0 x 2.3 m CNC turning and milling center DMG MORI – NLX 2500 SY / 700 - Sub spindle - Driven tools - C and Y axis

Sąlyga: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 7024NL256160890J, veleno greitis (maks.): 10 000 aps./min, Y ašies eiga: 200 mm, sukimosi greitis (maks.): 4 000 aps./min, Strypo skersmuo (maks.): 80 mm, atstumas tarp centrų: 700 mm, Condition: Ball screw drives in X, Y, and Z axes are new + major maintenance package conducted 6 months ago (not in use since) TECHNICAL DETAILS Distance between centers: 700 mm Spindle speed: 1 – 4,000 rpm Power: 18.5 / 18.5 / 15 kW (25% DC / 50% DC / continuous) Bar capacity: Ø 80 mm Turret: 12 stations, bolt-on turret Tool spindle: 10,000 rpm Tool spindle power: 5.5 / 5.3 / 7 kW (3 min / 5 min / continuous) Mounting: MT5, revolving Center points supplied without center Overhang of driven tools: ±100 mm Control: M730UM, CELOS - ERGOline Touch Assemblies: Integrated MK4 support for center Chip and cooling systems Scraper belt chip conveyor: with magnetic separator, discharge height approx. 1,000 mm Cooling system: increased pressure 5 bar, pump 800 W, flow rate 20 l/min Coolant shower at chuck, incl. high-performance pump Compressed air blow-off system for tool holders Compressed air blow-off for tailstock center Inline filter for cooling system EQUIPMENT - Interface for oil mist separator Ø 150 mm - Tool presetter not included - Signal lamp: red, yellow, green, blue - EtherNet/IP interface for automation - Robot interface for DMG Mori Seiki gantry robots - Transformer: 45 kVA, three-phase autotransformer Isdpfexamqmex Af Ioht - X-axis ISO direction - Machine is supplied without chuck

Sąlyga: geras (naudotas), Gamybos metai: 2011, GILDEMEISTER CNC Twin-Spindle Turning Center Model: CTX beta 1250 4 A Machine No.: 00700000211 Year of Manufacture: 2011 Control: CNC path control incl. 19" TFT Siemens Sinumerik 840 D sl solution line with ERGOline control and ShopTurn 3 G Ihsdpewcxlwjfx Af Iot Power-on hours: 41,378 h Program run time: 24,814 h Technical data and equipment available on request.

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2018, veikimo valandos: 23 501 h, Funkcionalumas: visiškai funkcionalus, sukimosi skersmuo virš skersinio stumduko: 740 mm, tekėjimo skersmuo: 920 mm, ašies variklio galia: 18 W, veleno greitis (maks.): 4 000 aps./min, X ašies eiga: 260 mm, Y ašies eiga: 50 mm, Z ašies eigos atstumas: 795 mm, frezos veleno ilgis: 91 mm, sukimosi greitis (maks.): 10 000 aps./min, bendras aukštis: 2 395 mm, bendras ilgis: 5 330 mm, bendras plotis: 4 100 mm, sūpynės skersmuo virš skersinio vežimo: 740 mm, veleno nosis: JIS A2-8, bendras svoris: 8 360 kg, CNC Control: Mitsubishi M730UM (CELOS - ERGOline Touch) Capabilities Travel X-axis mm: 260 Travel Y-axis mm: ±50 Iodpewkf H Djfx Af Ijht Travel Z-axis mm: 795 Turning length mm: 705 Max. turning diameter mm: ø 366 Swing over bed mm: ø 920 Swing over cross slide mm: 740 Bar capacity mm: 80 Tool Magazine Number of tool positions: 20 Tool holder: BMT40 Upper Turret Number of tool positions: 20 Max. speed driven tools rpm: 10,000 Driven tool power kW: 5.5/4.9/4.2 (3 min/5 min/cont) Y-axis travel mm: 100 Rapid traverse rate: 30 Main Spindle Max. spindle speed rpm: 4,000 Spindle motor power kW: 18.5/18.5/15 (25%ED/50%ED/cont) Spindle bore mm: 91 Chuck type: Hollow chuck (Ø254 mm) BB210A821 Manufacturer: KITAGAWA Spindle nose: JIS A2-8 Max. torque Nm: 49 Sub-Spindle Max. spindle speed rpm: 5,000 Spindle motor power kW: 11/7.5 (25%ED/cont) Spindle bore mm: 73 Chuck type: Hollow chuck (Ø210 mm) BB208A621 Manufacturer: KITAGAWA Spindle nose: JIS A2-5 Max. torque Nm: 22 Sub-spindle travel mm: 734 Cooling system Tank volume liters: 366 Equipment Electronic handwheel Chip conveyor Signal lamp High-pressure pump Mist separator Work area light Dual foot switch for main and sub-spindle Coolant gun Measuring probe Paper band filter Preparation for robot operation Robot data - Fanuc - R-30iA / Type M-16iB/20 Availability of 10 pallets in the warehouse (10 slots) Clamping by robot: ø40 to 220mm x Height 20mm Max. weight per robot piece: 5.6kg Machine run time: Power-on hours: 23,501 Nominal power kVA: 48 Cutting time: 7,494 Base machine: Dimensions / Weight Length mm: 5,330 Width mm: 4,100 Height mm: 2,395 Weight kg: 8,360