VDI40 įrankių laikiklis – įrankių laikikliai

diverse Hersteller VDI40-E2, zylindrische Aufnahme

Gamybos metai: 2009, Sąlyga: paruoštas naudoti (naudotas), Turning diameter: 200 mm, passage diameter: 330 mm, passage diameter over cross slide: 260 mm, travel X/Z: 160 mm/460 mm, feed X/Z: 24 m/min, spindle speed: 5000 rpm, spindle bore: 51 mm, spindle power: 16.5 kW/11 kW, torque: 1665.5 Nm/112 Nm, tailstock: 400 mm, tool stations: 12. Machine dimensions X/Y/Z: approx. 4200 mm/1700 mm/2300 mm, weight: approx. 3500 kg, control: Siemens Sinumerik 810D. Includes chip conveyor. Documentation available. On-site inspection possible. Itsdpfx Abjv Dkb Iedop

Sąlyga: geras (naudotas), Gamybos metai: 2007, - SIEMENS 840 D control system - Bar passage: 65 mm - Main and sub-spindle, max. speed 5,000 rpm - C-axis, Y-axis Isdpfx Aeuw Izvjbdetp - 3 turrets with 12 stations each (all driven) - Driven tool speed: 4,000 rpm - Tool holder: VDI 30 with drive DIN 5480 TRAVEL PATHS X1 = 165 mm, Z1 = 220 mm X2 = 165 mm, Z2 = 150 mm X3 = 165 mm, Z3 = 650 mm, Y3 = 80 mm (+50/-30) ACCESSORIES Coolant system Chip conveyor Bar loader TOP Automazioni XF 375

Sąlyga: naudotas, Description: General: Year of manufacture: 2009 Control system: Siemens 840 Dsl (C200-4D SL) Bar capacity: 65 mm Milling spindles: 18,000 rpm Main spindle: Technology: Motor spindle Speed: 5,000 rpm Max. power: 35.5 kW Max. torque: 170 Nm C-axis: 0.001° Z-axis: 390 mm Bar capacity: 65 mm Clamping cylinder: Hollow clamping cylinder Chuck: 3-jaw chuck Sub spindle: Technology: Motor spindle Speed: 5,000 rpm Max. power: 35.5 kW Max. torque: 170 Nm C-axis: 0.001° X-axis: 600 mm Z-axis: 390 mm Bar capacity: 65 mm Chuck: 3-jaw chuck Tool carrier I: Technology: Milling spindle on cross slide Speed: 18,000 rpm Tool interface: HSK 40 X-axis: 350 mm Y-axis: 160 mm (+/- 80 mm) B-axis: 230° Tool carrier II: Itsdovxmy Njpfx Abdop Technology: Milling spindle on cross slide Speed: 18,000 rpm Tool interface: HSK 40 Y-axis: 160 mm (+/- 80 mm) B-axis: 230° Tool magazine: Technology: Chain magazine Number of stations: 80 pcs Tool changer: Double gripper Max. tool length: 180 mm Equipment / Accessories: Chip disposal: Chip conveyor Coolant supply: High-pressure coolant system with filter Parts removal: Gantry loader Bar loader interface: Electrically prepared Tool monitoring: Drill breakage control

Sąlyga: geras (naudotas), Dividing head with 24-division direct indexing or via crank using scale 200 mm Röhm chuck overall height 165 mm depth 350 mm width 300 mm Ijdpfsdx D Rzex Abdstp weight 34.5 kg

Sąlyga: naudotas, Gamybos metai: 1982, Grinding length: 500 mm Grinding width: 225 mm Workpiece height: 400 mm Total power requirement: 5.5 kW Machine weight approx.: 3.4 t with NC control NC81, table toothed belt drive 100-25000 mm/min, automatic feed, electronic straight dressing with speed compensation, coolant pump, emergency stop safety device Isdpfxjcxxtme Abdotp

Gamybos metai: 2016, Sąlyga: paruoštas naudoti (naudotas), Cutting capacity at 90°: Round material: 260 mm; Flat material: 300 mm / 260 mm; Saw band length: 4640 mm; Saw band width: 34 mm; Saw band thickness: 1.1 mm; Cutting speed: 140 m/min; Power: 4 kW; Machine dimensions (L/W/H): approx. 2500 mm / 2300 mm / 1500 mm; Weight: approx. 1500 kg. Includes roller conveyor stand. Documentation available. On-site inspection possible. Itodpfx Aov Np Uqsbdsp

Sąlyga: geras (naudotas), Gamybos metai: 2004, Spindle bore: 60 mm Turning length: 280 mm Control system: Siemens 840 D Main spindle speed: 6300 rpm Drive power (spindle motor): 3.3 kW Turret 1: Disc turret Number of tools in turret 1: 8 Tool system: DIN 69 880 / 25mm X-axis travel: 90 mm Z-axis travel: 280 mm Feed force: 5500 N Rapid traverse: 24 m/min Milling spindle drive power: 5.000 kW Turret 2: Dovetail turret Number of tools in turret 2: 6 X-axis travel: 81 mm Isdpfx Aowbvhaobdetp Z-axis travel: 80 mm Feed force: 5500 N Rapid traverse (X-axis): 16 m/min Rapid traverse (Z-axis): 24 m/min Machine weight: approx. 2.5 t Space requirement: approx. 6.0 x 2.0 x 2.0 m The INDEX ABC is a compact CNC lathe for short-turned parts made from bar stock. It features a slant-bed design with two independent turrets. The upper turret is mainly designated for internal machining and cut-off-side operations, while the lower turret handles external machining. This turret configuration allows for collision-free operation and simple programming with high tool availability. The large open working area promotes optimal chip flow. Working area features two turrets: "Turret 1": - Disc turret with 7 radially arranged tool positions Ø 25 mm DIN 69880 and one position for the reinforced synchronized spindle at turret station 8. With an adapter, tools with 1'' shanks may also be used. The turret head is prepared for the V-guide system. - Synchronized spindle for backworking, allowing simultaneous parallel machining with the main spindle. Collet chuck Ø42 or 3-jaw gripper chuck for internal and external clamping. Jaw stroke 0.6 mm. Clamping diameter (external) 75 mm. - Back-drilling unit. Starting from the center of the working spindle in a clockwise direction, three stationary back drilling tools are arranged. These are located on the pitch circle of the synchronized spindle. Backworking takes place simultaneously to main spindle machining. Two additional tools can also be mounted and may be fitted with driven tool units. "Turret 2": - Turret with 6 symmetric dovetail tool holders, each station equipped with two mounting bores for cylindrical shank tools. The following tool systems can be used: - Stationary tools moveable in the Z-direction - Driven tools with Ø25 mm cylindrical shank (two positions per station can be equipped) - Including bar feeder LM 3200 - + various accessories (various diameter guide bushings/tool holders) Technical data: - Bar material diameter: (Ø 25 / Ø 36 / Ø 52) --> Round: Ø 8 - 25.4 / 8 - 36 / 8 - 52 mm --> Square SW: Ø 6 - 14 / 6 - 20 / 6 - 20 mm --> Hexagon SW: Ø 7 - 22 / 7 - 30 / 7 - 41 mm --> Octagon SW: Ø 7 - 22 / 7 - 32 / 7 - 40 mm --> Maximum bar length: 3200 mm --> From Ø 25 mm bars: minimum. 2,500 mm --> Up to Ø 25 mm bars: minimum. 1,500 mm --> Bar tray capacity = approx. 300 = 6 x Ø 52 mm bars Mass (bar feeder): 700 kg

Sąlyga: naudotas, TECHNICAL DATA - Number of axes: 9 - Number of spindles: 2 MAIN SPINDLE - Maximum bar diameter: 32 mm - Travel distance: 310 mm - Spindle speed: 280 - 7,000 rpm - Spindle drive power: 7.5 kW - Minimum C-axis resolution: 0.01° SUB SPINDLE Itedsuha Elspfx Abdop - Maximum bar diameter: 32 mm - Z travel distance: 150 mm - Spindle speed: 280 - 7,000 rpm - Spindle drive power: 3.7 kW - Minimum C-axis resolution: 0.01° - Number of turrets: 1 UPPER TURRET - Number of positions: 10 - Number of driven positions: 10 - Driven tool speed: 5,700 rpm - Driven tool power: 2.8 kW BUSH HOLDER 1 - Number of positions: 4 - Number of driven positions: 3 - Driven tool speed: 6,000 rpm ELECTRICAL SUPPLY - Supply voltage: 200 V - Total power consumption: 8 kVA WEIGHT AND DIMENSIONS - Footprint: 2,645 x 1,403 mm - Machine height: 1,680 mm - Machine weight: 3,880 kg EQUIPMENT - Control unit: Fanuc 16 iTB - 3-color status tower - Parts catcher - Parts conveyor belt - Chip conveyor - Coolant tank - Bar feeder: IEMCA BOSS 432/32LL - Electrical transformer

Gamybos metai: 2000, Sąlyga: paruoštas naudoti (naudotas), X-axis: 250 mm, Z-axis: 1,450 mm, distance between centers: 1,500 mm, max. workpiece weight: 350 kg, swing diameter over bed/support: 500/350 mm, quill diameter: 80 mm, quill stroke: 180 mm, connected load: 30 kVA, length: 3,130 mm, width: 1,560 mm, height: 1,845 mm, weight: 2.6 t, including documentation, on-site inspection possible. Iedpfjqv Et Ijx Abdstp

Sąlyga: naudotas, Gamybos metai: 2005, x eiga 500 mm y eiga 450 mm z eiga 400 mm Valdymas Heidenhain iTNC 530 c ašis 360° b ašis -5/+110° Sukimosi greitis 20–10000 aps./min Pagrindinio veleno pavaros galia 13 kW Įrankio tvirtinimas SK 40 Įrankių kiekis magazine – 16 vnt. Greitasis važiavimas – 24 m/min Stalo tvirtinimo paviršius 630 x 500 mm Stalo apkrova 200 kg Mašinos svoris apie 4,0 t Matmenys I x P x A 2,3 x 3,2 x 2,75 m 3+2 ašių apdirbimo centras - Pilnai programuojamas pasukamas/pakreipiamas stalas - Išorinis aušinimo skystis Itodpfx Abew Eyg Isdop - Elektrinis rankinis ratukas - Veleno keitimas 2015 m.