Temperatūros bandymų spinta, 25 litrų

CTS T-40/25 -40°C bis +180°C

Būklė: labai geros būklės (naudotas), Weiss Temperature Chamber Air-cooled We are offering a Weiss temperature chamber for sale. Weiss temperature chamber with S!MCON / 32 control unit Test chamber volume: approx. 195 liters Test chamber dimensions: Height 750 mm, Width 580 mm, Depth 450 mm External dimensions: Height 1775 mm, Width 870 mm, Depth 1600 mm Operating data: Test chamber lighting: halogen bulb 24V, 50W Rated voltage: 3/N / PE AC 400 V ±10% 50 Hz Rated current: 14 A Temperature testing data: Temperature range: -42 to +180 °C Temporal temperature deviation (center of usable space): ± 0.1 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1.5 K Temperature change rate: Heating: 4 K/min Cooling: 4 K/min Heat compensation max.: 2300 W Refrigerant: R404 A 2.5 kg Weight: 490 kg Type: WT3 - 180/40 For your safety as the buyer, please note the following information! The following procedures are carried out on all our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. Leak test with certificate 4. After a successful inspection, the chambers are subjected to a test run monitored with calibrated equipment. Condition: used Fsdpfx Aegmhrfofdjph Scope of delivery: (See picture) (Changes and errors in technical data and specifications are reserved!) For further questions, do not hesitate to call us. You may also place written orders via email or fax.

Gamybos metai: 2009, būklė: paruoštas naudoti (naudotas), Resolution X/Y (3D and 2D): 21μm/10.5μm, Illumination: Multispectral, multidirectional, Component clearance above/below PCB: 40mm/100mm, Maximum inspection speed: 50cm²/s, Inspection area X/Y: 450mm/350mm. Dimensions X/Y/Z: approx. 1150mm/1150mm/1450mm, Weight: approx. 500kg, Software: OptiCon Pilot 5.3. Includes calibration tool, manuals, camera, lighting units, and repair software for error visualization. Computer was replaced in 2012. Documentation available. Fpodpfjtz Dkyox Afdeh

Būklė: labai geros būklės (naudotas), RMS Vibrations Test System We offer you an RMS Electrodynamic Vibration Test System. RMS Vibration Test System Test Manager SWR 900 Vibration Exciter SW 3006 30V-50A-3434 N Power Amplifier TGA 3000-000.00 Fpodpfx Afsgk I I Tedsh Condition: used Untested! Testing was not possible. Scope of delivery: (see picture) (Subject to alterations and errors in the technical data and specifications!) If you have further questions, we would be happy to answer them by phone. Written orders are possible via email or fax.

Būklė: labai geros būklės (naudotas), TIRA Type: TCZ 4022 S -2K Description: Air-cooled Climate Simulation Chamber System Composition: The system consists of the following main assemblies: - Walk-in, insulated chamber - Air treatment compartment - Humidification system - Machinery compartment - Control cabinet Technical Data: Performance range for temperature testing: - Temperature range: -40...+140°C - Temperature stability, in supply air (temporal): ≤ ± 0.5°C (without thermal test chamber load, in accordance with DIN 50011 T13 / EN 60068) - Temperature stability, in supply air (spatial): ≤ ± 1.0°C (without thermal test chamber load, in accordance with DIN 50011 / EN 60068) - Heating rate (per DIN 50011): approx. 2.0 K/min (without thermal test chamber load per DIN 50011 / EN 60068, or test specimen in the temperature range -30°C...+85°C) - Cooling rate (per DIN 50011): approx. 2.0 K/min (without thermal test chamber load per DIN 50011 / EN 60068, or test specimen in the temperature range -30°C...+85°C) Performance range for climate testing: Fsdovx S Hhopfx Afdoph - Temperature range: +10...+90°C - Humidity working range: 10...approx. 95% rh (without thermal chamber load) - Dew point temperature range: +5...+89°C (without thermal chamber load) - Humidity stability (in supply air, temporal): ≤ ±2.5% rh (measured in supply air) Performance range for climate testing with heat compensation: - Temperature range: +15...+80°C - Humidity: 15...approx. 80% rh (without thermal chamber load, with max. 16 kW heat compensation) - Dew point temperature range: +10...+74°C (without thermal chamber load) Dimensions: - Test chamber (W x D x H): approx. 2260 x 4648 x 2260 mm - External dimensions (W x D x H): approx. 2660 x 6460 x 2800 mm - Clear door opening, test chamber door (W x H): 2260 x 2260 mm - Climate module KB 127 (W x D x H): 1700 x 800 x 1400 mm - Control cabinet (W x D x H): 800 x 500 x 2000 mm Design Features: - Air guidance: * Supply air: Perforated sheet at the rear wall, in the ceiling area * Exhaust air: Perforated sheet at the rear wall, in the floor area - Temperature control: * Direct cooling via evaporation of refrigerant in a finned heat exchanger * Heating via electric resistance heater - Dehumidification: * Direct dehumidification by evaporating refrigerant in a heat exchanger - Interior cladding: Stainless steel - Exterior cladding: Galvanized, powder-coated steel sheet - Floor design: Stainless steel, floor load 15,000 N/m² - Wheel load (bearing surface ≥4 cm²): 1,500 N/wheel - Door: Double-wing door, stainless steel, lacquered exterior with viewing window (W x H) 1,000 x 1,000 mm - Chamber lighting: 4 spotlights at 500 W each - Insulation: Double-layer, 80 mm PUR foam, 120 mm mineral wool - Refrigeration unit (1 pc.): Blitzer 6G-30.2Y - Refrigerant: R449A - Refrigeration oil: SEZ 32 - Steam humidifier (1 pc.): EDB 40 Color scheme: - Chamber: RAL 9010, white - Door: RAL 9010, white - Machine unit: RAL 7032, pebble grey - Control cabinet: RAL 7032, pebble grey Weights: - Total system: approx. 4,900 kg - Machine set KB 127: approx. 750 kg - Control cabinet: approx. 120 kg - Humidifying unit: approx. 64 kg Connections: - Rated voltage: 400 V +6%/-10% 3/PE N 50Hz - Rated power: 95 kW - Rated current: 150 A

Būklė: labai geros būklės (naudotas), CTS Temperature Test Chamber T-55/1000 Li Water-Cooled Temperature Range: -50°C to +100°C Rated Voltage: 400V 3/N 50Hz Rated Power: 9.5 kW Rated Current: 18 A Compressor: TFH2511Z / TFH2511Z Refrigerant R404A/R23 The type designation of the CTS chamber series is composed as follows: For example, Type T -55/1000/Li 1) T stands for: Temperature 2) -55 stands for: lower temperature limit -55 °C 3) 1000 stands for: 1000 liters test chamber volume 4) Li stands for: Special equipment for tests with lithium-ion accumulators Control: 32-bit controller LCD control panel Digital display of set and actual values Numerical entry of set values Error messages in plain text Fodpfx Aovba Rajfdjph Ethernet interface RS 232 interface Free switching channels for user-side test specimen control Test chamber lighting: Energy-efficient, high-luminance LED light strip mounted on the door Insert rack: Stainless steel, support surface 970 x 980 mm Load per rack max. 35 kg Total load with maximum rack configuration 100 kg 1a Feedthrough NW50 1b Feedthrough 2x NW125 1c Feedthrough 2x Rp 3 1/4'' for Minimax Technical performance data: Temperature tests: Temperature range -50°C to +100°C Temperature deviation ≤ ±0.3 K over time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 2.5 K/min Heat compensation: Approx. 4000 W at +20°C Approx. 2200 W at -40°C The technical data refer to an ambient temperature of +25°C, rated voltage 400V, without test specimen, without heat compensation, and without additional equipment. Options may affect the performance data. Dimensions: Test chamber volume 1000 liters Internal dimensions Height approx. 1000 mm, Width approx. 860 mm, Depth approx. 1100 mm External dimensions Height approx. 1950 mm, Width approx. 1270 mm, Depth approx. 1900 mm Operational data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Rated current 18 A Rated power 9.5 kW Protection class IP 54 Sound pressure level < 58 dB(A) (measured according to DIN EN ISO 3744 at 1m distance from the front) Weight approx. 1000 kg Heat emission to installation room 10.4 kW Cooling unit: Water-cooled, low-noise, fully hermetic Continuous performance adjustment via electronic monitoring and control system, environmentally friendly refrigerants R404A/R23 Important information for your peace of mind as a buyer! The following points are carried out on our offered chambers prior to sale: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful checking, the chambers undergo a documented test run. Condition: used Scope of delivery: (see image) (Subject to change and error in technical data and information!) We are happy to answer any further questions you may have by telephone.

Būklė: labai geros būklės (naudotas), CTS Type: T-40/600 /011232 CTS Temperature Test Chamber, Water-Cooled Includes metal supports to increase the load-bearing capacity of the base Test chamber volume: 600 liters Test chamber dimensions: Height approx. 850 mm, width approx. 850 mm, depth approx. 830 mm External dimensions: Height approx. 1900 mm, width approx. 1050 mm, depth approx. 1850 mm Temperature operating range: Temperature range: -40 to +180°C Temperature deviation: ±0.1 to ±0.3 K over time Heating rate: 2.5 K/min Cooling rate: 3 K/min Electrical connection: 400 V +6% -10%, 3/N, 50 Hz Fpodpfx Afewfdnisdjh Rated power: approx. 5.5 kW Rated current: approx. 8.5 A Refrigerant: R-404A Weight: 550 kg Important safety information for buyers! The following steps are carried out in advance for the chambers we offer: 1. Function check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to changes and errors in technical data; all information without guarantee!) For further questions, we are happy to assist you by phone.

Būklė: labai geros būklės (naudotas), Weiss Temperature Chamber We are offering a Weiss temperature chamber. Weiss temperature chamber, air-cooled, with Weiss condenser cooler Test chamber volume: approx. 990 liters Specifications for temperature testing: Temperature range: -40°C to +180°C Temporal temperature deviation at the center of the usable space: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±2.0 K Temperature gradient (according to IEC 60068-3-5): 1 to 4 K Temperature change rate (according to IEC 60068-3-5): Heating: 4 K/min Cooling: 3 K/min Heat compensation: max. 4500 W Port openings, included in basic configuration: R1: nominal width 125 mm L1: nominal width 50 mm Dimensions: Test chamber interior dimensions: width 1100 mm x depth 950 mm x height 950 mm Overall unit dimensions: width 1390 mm x depth 1525 mm x height 1995 mm Maximum load capacity (evenly distributed) for the test chamber floor: 150 kg Per shelf: 50 kg Total shelf load: 100 kg Technical data for operation: Test chamber lighting: halogen bulb, 24 V, 50 W Rated voltage: 3/N / PE AC 400 V ±10% 50 Hz Rated power: 11.5 kW Rated current: 22 A Heat output for water-cooled cabinets: max. heat output to ambient 1.3 kW Noise level: Sound pressure level: approx. 64 dB(A) Refrigerant: (converted to R-452a) Weight: approx. 840 kg Model: WT11-1000/40 Important information for your safety as a buyer! The following points are carried out in advance on all chambers we offer: 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerant Fpsdpfxsp Dun Uo Afdjh 3. Leak test with certificate 4. After successful inspection, the chambers undergo a test run monitored with calibrated equipment. Condition: used Scope of delivery: (See picture) (Specifications and technical data are subject to change and error!) For further questions, please feel free to contact us by phone.

Gamybos metai: 2011, būklė: geras (naudotas), Essemtec Pantera XV komponentų montavimo automatas Pagaminimo metai: 2011 0201 komponentai Vaizdų apdorojimas iš viršaus Išmanusis juostinis padaviklis (nuo 8 iki 56 mm) Montavimo greitis 4 500 komponentų/val. Lengvai valdoma grafinė programinė įranga Optinis orientavimas "judant" Upward-Vision sistema komponentų tikrinimui Padaviklių paketas: 9 – 740i popierius 8 mm 1 – 740i blisteris 8 mm 5 – 741i 12 mm 7 – 742i 16 mm 1 – vibracinis padaviklis Fodsyxc I Uopfx Afdjph 1 – strip tape padaviklis

Būklė: labai geros būklės (naudotas), Here we offer a temperature test chamber. Water-cooled Temperature range: -45°C to +180°C External dimensions: Width 1300 mm x Height 2100 mm x Depth 2250 mm Test chamber dimensions: Width 840 mm x Height 840 mm x Depth 840 mm Unit section: Width 2300 mm x Height 2000 mm x Depth 1300 mm Average heating rate: approx. 3 K/min Average cooling rate: approx. 2 K/min Fpsdjygunhepfx Afdjh Power consumption: 15 A Connection voltage: 3x400V/N/PE 50Hz Weight: approx. 1000 kg Model: VTS 600/45 RS Refrigerant: R452 Condition: used Scope of delivery: (see photo) (Technical data and specifications may be subject to change and errors!) We are happy to answer any further questions by phone.

Būklė: geras (naudotas), Vötsch VCS 4100 klimatinė bandymų kamera - nuo -40 °C iki +180 °C Gamintojas: Vötsch Tipas: VCS 4100 Temperatūros diapazonas: nuo -40 °C iki +180 °C Fpodpfx Afsuuiygedeh Tinklo įtampa: 400 V Nominali srovė: 17 A Nominali galia: 11 kW Šaltnešis: R404A KK-07 Finansavimas per mūsų banką taip pat galimas. komplett-konzept.leasingo.de Daugiau naujų ir naudotų prekių rasite mūsų parduotuvėje! Tarptautinio siuntimo kainos - pagal užklausą!