3-velenų žiedų lankstymo staklės, profilių lankstymo staklės, 3-velenų apvalių lenkimo staklės

CONZ UM 7-4

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2021, mašinos/transporto priemonės numeris: 06 61 218, Ref. no.: Lg 32821 Single-Sided Decoiler BBT ABH 2000/400 Exhibition machine, unused Machine no.: 06 62 218 Year of manufacture: 2021 Technical Data Load capacity approx.: max. 2,000 kg Strip width: max. 400 mm Coil inner diameter: approx. 450 to 520 mm Coil outer diameter: max. 1,500 mm Unwinding speed: approx. 2 to 15 rpm Equipped with adjustable drive and loop control via ultrasonic sensor (analog). Drive by frequency-controlled three-phase geared motor. Ncsdpfog U Utvox Acpsr Expansion of the carrying segments is manual using a hand crank via joints. Number of carrying segments: 3 Coil side guidance by robust clamping limit arms. Decoiler stand built in sturdy box-section as welded construction. Additional Equipment: Shutdown “Loop too small” via antenna switch, mounted on the column of the loop control base housing. Height infinitely adjustable. Strip side guidance at the base housing of the loop control, with lateral guide rods. Pass-through width infinitely adjustable.

Būklė: naudotas, bendras ilgis: 1 330 mm, bendras plotis: 1 040 mm, bendras aukštis: 1 150 mm, Svoris be krovinio: 1 800 kg Kaina: pagal užklausą Njdsxuf Sljpfx Acpjcr - Dokumentacija prieinama: Ne - CE sertifikatas: Ne - Valdymas: Konvencinis - Veleno skersmuo [mm]: 85 - Apskritimo skersmens talpa [mm]: 60 - Transportavimo matmenys: 1330mm x 1040mm x 1150mm (i x p x a) - Transportavimo svoris [kg]: 1 800kg - Transportavimo paketų skaičius [vnt.]: 1 Finansinė informacija PVM: Nurodyta kaina be PVM PVM / skirtumo apmokestinimo schema: PVM atskaitomas juridiniams asmenims Pristatymas ir priėmimas mainais visuomet galimi visiems pramonės įrenginiams Lukas van Rossum

Būklė: naudotas, rida: 209 000 km, galia: 96 kW (130,52 AG), pirmoji registracija: 10/2013, kuro tipas: dyzelinas, bendras svoris: 3 500 kg, spalva: balta, pavaros tipas: mechaninis, emisijos klasė: Euro 5, sėdimų vietų skaičius: 3, krovimo vietos ilgis: 4 200 mm, krovinių skyriaus plotis: 2 050 mm, krovos erdvės aukštis: 2 050 mm, Įranga: ABS, centrinis užraktas,

Būklė: naudotas, 3-Roller Section Bending Machine Brand: RAGACHE Model: New Tube CP70 Nsdpfx Acsuluhwjpscr Drive Roller Diameter: 232 mm Maximum Capacity (Rectangular Steel): 60.0 mm Maximum Capacity (Round Steel): 40.0 mm Maximum Capacity (L-Profile Steel): 70.0 mm Maximum Capacity (U-Profile Steel): 120.0 mm Maximum Capacity (T-Profile Steel): 60.0 mm Maximum Capacity (I-Profile Steel): 120.0 mm

Būklė: naudotas, Thread rolling machine, cold rolling machine, thread roll machine, profile rolling machine Manufacturer: PEE-WEE Model: UPW 24 Serial no.: P07 Year of manufacture: 2007 Max. rolling force: 24 tons Max. tool diameter: 270 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Maximum tool mounting length/tool length: 180 mm Max. workpiece diameter: 50 mm Hydraulic motor output: 3 kW Roll drive motor output: approx. 5.5 kW Mains connection: 400 Volt, 50 Hz, 10 kW - Swiveling roll spindle for through-feed thread rolling - Roll spindle speed in 4 steps via gear shifting - Hydraulic unit integrated in machine bed - Operating manual with electrical schematic diagram Required space (L x W x H): 2000 x 1450 x 190 mm Weight: approx. 3 tons Very good condition Plunge rolling: The thread rolling tools with the same pitch as the workpiece form the thread by penetrating the workpiece up to the nominal diameter. The maximum thread length equals the width of the rolling tools. Through-feed rolling: Used when the thread length is greater than the width of the rolling tools. Through-feed tools have three sections – the lead-in, the calibration section, and the lead-out. Groove rolls have no pitch and are swiveled to match the lead angle of the profile to be rolled. Njdpfx Acjuz If Nspjcr Pitch rolls differ from groove rolls by having a pitch in the profile. The sum of the pitch angle and swivel angle results in the lead angle in the workpiece.

Būklė: naudotas, Volelių komplektai profilių lenkimo staklėms, 3-vamzdžių žiedų lenkimo staklėms HERKULES WETZLAR. Voleliai tinkami naudoti su profilių lenkimo staklėmis HERKULES WETZLAR, modelis BO 238 N. Veleno skersmuo: 60 mm su 18 mm pleišto grioveliu. 2 vnt. volelių komplektas Nr. 1, volelio skersmuo = 110 mm, plotis = 180 mm. 2 vnt. volelių komplektas Nr. 2, volelio skersmuo = 160 mm, plotis = 40 mm. 3 vnt. volelių komplektas Nr. 3, volelio skersmuo = 150 mm, skirta vamzdžių Ø 33 mm, plotis 87 / 115 mm. - Komplektas Nr. 3 su adapterio žiedu nuo Ø 93 iki Ø 60 mm be pleišto griovelio. Staklės turėjo 2 varomus volelius. Visi voleliai sveria 57 kg. Gera būklė. Ncedpfxjglaq Ij Acpjr

Būklė: naujas, Gamybos metai: 2024, keliamoji galia: 300 kg, Welding Positioner KT 300 Load Capacity Horizontal: 300 kg, Tilted: 150 kg Power Supply: 220V, 50 Hz Table Diameter: 450 mm Height: 500 mm Tilt Range: continuously adjustable via geared crank motor 0 - 90° Nsdoc Ug Tlspfx Acpocr Rotation Speed: 0.3 to 2.5 rpm Incl. foot remote control Optional extra: Quick-action chuck Diameter: 300 mm, €450.-

Būklė: naujas, Gamybos metai: 2026, mašinos/transporto priemonės numeris: diverse, The professional solution for crosscuts, miter cuts, and compound angle cuts The ZS 200 N is ideally suited for crosscuts, miter cuts, and compound (bevel) cuts. It enables clean and precise machining of materials such as wood, PVC, and aluminum profiles. The saw unit runs on a hardened guide arm and can be swiveled horizontally to either side for mitering. The "N" denotes the tilting function, which means the saw unit can also be vertically tilted to the side, making compound angle cuts effortless. ZS 200 N Fact Check - Crosscut and miter circular saw with a maximum cutting height of 200 mm - Robust cast iron construction - Precision ball bushing guidance of the tool carriage on hardened and ground steel shafts - Manual saw feed - Quick miter adjustment up to 65° horizontally and up to 60° vertically - Re-adjustable fixed stops and lower saw blade guard - Can be connected to dust extraction - Machine tiltable to both sides from the front - Hydraulic feed brake Technical Specifications: - Motor: 400 V / 5.0 kW - Speed: 2800 rpm - Cutting length: 420 mm (at 90°) - Cutting height: 200 mm (at 90°) - Miter range (horizontal): 45°-90°-25° - Miter range (vertical): 60°-90°-30° - Saw blade diameter: 520 mm - Weight: 310 kg Scope of delivery: - ZS 200 N crosscut and compound miter saw - Machine stand - Machine tiltable to both sides from the front Nedpfx Ash Nu Iuocpjcr - Hydraulic feed brake - HM Z 60 neg. circular saw blade - Operating tools and hand crank

Būklė: naudotas, Gamybos metai: 1988, Technical details: Pressure: 10 t Workpiece diameter - max.: 40 mm Thread length: 70-80 mm Workpiece diameter min./max.: 3 / 40 mm Rotational speeds: 47-94 rpm Feed rate: 0.5 – 6 mm/s Maximum stroke: 7 mm Total power requirement: 4.68 kW Machine weight approx.: 1.4 t Machine dimensions: 1.4 x 1.4 x 1.7 (W x D x H) m Hydraulic unit dimensions: 0.8 x 1.2 m Hydraulic drive Manual and automatic cycle Ncsdpfjw D Aq Tjx Acpsr Adjustable roller speed Max. thread diameter 40 mm, min. thread diameter 3 mm Up to 3.5 mm pitch, max. pitch 1.75 mm Roller width min. 80 mm, max. 120 mm Spindle speed 47-94 Roller shaft diameter 40 Various rollers included as accessories

Gamybos metai: 2023, būklė: naujas, We are selling a new double belt grinding machine. The contact wheels are available in various dimensions. Technical specifications: Weight: approx. 350 kg Electrical connection: see nameplate of the respective drive motor Compressed air connection: 3 - 8 bar Noise level: > 85 dB(A) Contact wheels: max. Ø 350 mm x 110 mm Ncsdpfxok D Ex Ts Acpor Abrasive belts: max. 120 mm x 3500 mm length Extraction connection: Ø 160 mm If you have any further questions, please feel free to contact us!