3 Ritininis lenktuvas

RAGACHE New Tube CP70

Būklė: naudotas, Gamybos metai: 1988, Technical details: Pressure: 10 t Workpiece diameter - max.: 40 mm Thread length: 70-80 mm Workpiece diameter min./max.: 3 / 40 mm Rotational speeds: 47-94 rpm Feed rate: 0.5 – 6 mm/s Maximum stroke: 7 mm Total power requirement: 4.68 kW Machine weight approx.: 1.4 t Machine dimensions: 1.4 x 1.4 x 1.7 (W x D x H) m Hydraulic unit dimensions: 0.8 x 1.2 m Hydraulic drive Ndjdow D Aq Topfx Apnjc Manual and automatic cycle Adjustable roller speed Max. thread diameter 40 mm, min. thread diameter 3 mm Up to 3.5 mm pitch, max. pitch 1.75 mm Roller width min. 80 mm, max. 120 mm Spindle speed 47-94 Roller shaft diameter 40 Various rollers included as accessories

Būklė: naudotas, Spaudimas 50 t Nedjra Rrhopfx Apnjdc Lenkimo ilgis 1500 mm Stovų tarpas 1220 mm Valdymas Cybelec DNC 1200 Uždarymo greitis 95 mm/min Darbo greitis 1-10 mm/s Darbinis eiga 156 mm Vėlinimo laikas 59 ms Vėlinimo eiga 6 mm Gylis 200 mm Atstumas tarp stalo ir viršutinio presavimo įrankio 301 mm Stalo plotis 160 mm Stalo aukštis 850 mm x ašis 550 mm R ašies eiga +/- 50 Ašių skaičius 3 (Y, X, R) Svoris apie 3600 kg Įskaitant darbo lempą Įskaitant daug apatinės ir viršutinės įrankių 2003 m. atliktas pakartotinis priėmimas gamintojo (yra dokumentacija) Nauja valdymo sistema 2003 m. Cybelec DNC 1200

Būklė: naujas, Gamybos metai: 2012, Welding current: 20 - 100 A Maximum cutting capacity: 35 mm Open-circuit voltage: 250 V Minimum compressed air connection: 4 bar Ndjdpjw En E Ejfx Apnsc Connected load: 20 kVA Operating voltage: 400 V Weight: 0.7 kg Dimensions (LxWxH): 1.0 x 0.6 x 0.8 m Plasma cutting machine with trolley - includes 7 m torch package - spare nozzles

Būklė: naudotas, Thread rolling machine, cold rolling machine, thread roll machine, profile rolling machine Manufacturer: PEE-WEE Model: UPW 24 Serial no.: P07 Year of manufacture: 2007 Max. rolling force: 24 tons Max. tool diameter: 270 mm Nsdpjuz If Nofx Apnedc Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Maximum tool mounting length/tool length: 180 mm Max. workpiece diameter: 50 mm Hydraulic motor output: 3 kW Roll drive motor output: approx. 5.5 kW Mains connection: 400 Volt, 50 Hz, 10 kW - Swiveling roll spindle for through-feed thread rolling - Roll spindle speed in 4 steps via gear shifting - Hydraulic unit integrated in machine bed - Operating manual with electrical schematic diagram Required space (L x W x H): 2000 x 1450 x 190 mm Weight: approx. 3 tons Very good condition Plunge rolling: The thread rolling tools with the same pitch as the workpiece form the thread by penetrating the workpiece up to the nominal diameter. The maximum thread length equals the width of the rolling tools. Through-feed rolling: Used when the thread length is greater than the width of the rolling tools. Through-feed tools have three sections – the lead-in, the calibration section, and the lead-out. Groove rolls have no pitch and are swiveled to match the lead angle of the profile to be rolled. Pitch rolls differ from groove rolls by having a pitch in the profile. The sum of the pitch angle and swivel angle results in the lead angle in the workpiece.

Būklė: geras (naudotas), Gamybos metai: 1980, Donewell press brake Ndjdeqgcqiepfx Apnjc Model: 80-2500 Control: Cybelec CP 9220 Press force: 80 t Working width: 2540 mm Year of manufacture: 1980 Dimensions: 255x130x265 cm (LxWxH) Weight: approx. 6300 kg

Būklė: geras (naudotas), Gamybos metai: 1997, mašinos/transporto priemonės numeris: 71-000988, Offer 24820 Technical specifications: - Cutting current continuously adjustable: 30 - 100 A - Duty cycle: 80 A / 100% duty cycle 100 A / 80% duty cycle - Max. cutting thickness - steel: approx. 32 mm - aluminium: approx. 25 mm - stainless steel: approx. 55 mm - Air connection: 5 bar - Gas mixing system Ndsdpjvqbdysfx Apnsc - Connection: 400 V / max. 14.5 kVA - Required space: approx. W 800 x H 1650 x D 700 mm - Weight: approx. 250 kg

Būklė: naudotas, Gamybos metai: 1990, mašinos/transporto priemonės numeris: 2316-3, Ref. No. 10622 Technical Data: - Drilling capacity in solid steel ST 60: 28 mm - Drilling capacity in cast iron GG 25: 40 mm - Thread cutting in ST 60: M 30 - Thread cutting in GG 25: M 40 - Drill spindle taper: MK 3 - Spindle diameter: 50 mm Ndjdpeu Et Nbjfx Apnoc - Quill stroke: 150 mm - 18 spindle speeds: 45 – 2240 rpm - 4 feed rates: 0.1 – 0.45 mm/rev - Min./max. distance spindle – table: 300 / 700 mm - Drilling radius min/max: 305 / 1005 mm - Table height: 820 mm - Table size: 1200 x 600 mm - Drive: 400 V / 6 kW - Space requirement approx.: W 1300 x H 2800 x D 2300 mm - Weight approx.: 1500 kg Equipped with: - Thread cutting unit - Hydraulic column and arm clamping - Coolant system - T-slots vertical on the left side of the machine

Būklė: naujas, Gamybos metai: 2024, veikimo valandos: 50 h, mašinos/transporto priemonės numeris: 305, Available: February 2023 Control unit: Osai X-axis: approx. 3,100 mm Y-axis: approx. 2,100 mm Z-axis: approx. 1,000 mm A-axis: ± 115° C-axis: ± 360° Clamping Table Clamping surface: approx. 3,100 x 2,100 x 213 mm Aluminum with T-slots, crosswise every 250 mm Nsdpfewwq Hcsx Apnodc Maximum load: 1,000 kg evenly distributed over the entire surface 2-axis milling head ST7 Spindle power: 10 kW Spindle speed: max. 24,000 rpm Torque: 15.3 Nm Tool interface: HSK 63F Tool clamping: pneumatic Blow air / MQL: external Linear Axis Drives Feed rate X and Y axis: up to 50 m/min Feed rate Z axis: up to 30 m/min Color Enclosure, gantry, control cabinet: light grey Z-slide and milling head: orange Additional equipment - 15-position tool changer - Control unit in separate, mobile console

Būklė: geras (naudotas), Gamybos metai: 1999, veikimo valandos: 95 239 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 173937, spaudimo jėga: 2 000 kN, varžto skersmuo: 55 mm, tarpas tarp stulpų: 520 mm, formos aukštis (min.): 250 mm, bendras ilgis: 5 100 mm, bendras plotis: 1 800 mm, bendras aukštis: 2 200 mm, bendras svoris: 6 630 kg, Įranga: dokumentacija / vadovas, The machine was operating flawlessly up until the day before the arrival of the new machine. Therefore, it is in good used condition. The machine is being sold due to lack of space in the injection molding area and is no longer powered. The pump, injection unit, and clamping unit are all leak-free. The machine manual is available, and videos of the machine are available on request. Pump operating hours: 95,239 Automatic operating hours: 86,082 Ndodpfx Apjv D Nxljnjc Repairs in recent years: - Filter changed annually - 05/2024: Fan in the control cabinet replaced - 07/2023: New valve for Y201 and Y210 nozzle forward/backward - 02/2023: New keypad installed. Panel with motor and heating - 12/2022: Ejector sealed. Injection unit sealed, including new piston

Būklė: naudotas, Gamybos metai: 1995, Technical details: Sheet width: 3000 mm Sheet thickness: 12 mm Frame gap: 3500 mm Control: Cybelec DNC 10 G Backgauge: 1200 mm, motorized Cutting angle: 1.2 - 2.73° Blade gap adjustment: Yes Shear force: 66,000 daN Blade length: 3100 mm Hold-down clamps: 17 units Interface: RS232 Table size: 3200 x 600 mm Total connected load: 22 kW Machine weight approx.: 11.0 + (1.0 t for attachments/accessories) t Space requirement (LxWxH): approx. 4.5 x 2.6 x 2.1 m Transport dimensions (LxWxH): approx. 5.0 x 2.25 x 2.2 m The guillotine shear was commissioned for the first time in 1998. The DNC 10 G control system was specifically developed for guillotine shears. It features a numerical axis for controlling the backgauge and automatically calculates and adjusts the blade gap, cutting angle, and cutting depth based on the material to be cut (manufacturer’s information). Nsdpfxovc Amto Apnedc Table with side stop L: 930 x W: 105 x H: 42 mm 2 table extensions L: 1600 x W: 100 x H: 83 mm Angle stop (mounted on table extension) Operation via control panel with swiveling arm and foot pedal Equipment: Discharge table with rollers for cut material 2x safety guards