Gręžimo staklės

CONTUR FPU-3

Gamybos metai: 2002, būklė: geras (naudotas), Manufacturer: Matsuura Model: LX-O Control: YASNAC Year of manufacture: 2002 Specifications Metric US Standard X-axis travel: 330 mm Y-axis travel: 300 mm Z-axis travel: 250 mm Table length: 540 mm Table width: 320 mm Table load capacity: 100 kg Cedpslz Rvlsfx An Hjrc Feed rate X-axis: 90,000 mm/min Feed rate Y-axis: 90,000 mm/min Feed rate Z-axis: 90,000 mm/min Tool holder: 30 ISO/BT/MK Spindle power: 7.5 kW Spindle speed: 40,000 rpm Tool changer: 30 positions Chip conveyor: Yes Dimensions (approximate) Length: 2,800 mm Width: 2,600 mm Height: 2,800 mm Please note: The information on this page has been compiled to the best of our knowledge and, where possible, obtained from the manufacturer. The information is provided in good faith, but accuracy cannot be guaranteed. Therefore, this does not constitute representation or contractual terms. We recommend verifying all important details.

Gamybos metai: 1990, būklė: paruoštas naudoti (naudotas), Control: Deckel Dialog 11, with vice, inspection possible. Cjdpfx Asqi D S Uen Horc

Būklė: naujas, Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, įvesties srovės tipas: trifazis, X ašies eiga: 1 400 mm, Y ašies eiga: 650 mm, Z ašies eigos atstumas: 610 mm, ruošinio svoris (maks.): 1 400 kg, bendras aukštis: 2 492 mm, bendras ilgis: 4 367 mm, bendras plotis: 3 070 mm, stalo ilgis: 1 500 mm, stalo plotis: 650 mm, ašies variklio galia: 11 W, greitasis eiga Z ašyje: 24 m/min, greitas poslinkis X ašimi: 30 m/min, greitas poslinkis Y ašis: 30 m/min, veleno nosis: Iso 40, veleno greitis (maks.): 8 000 aps./min, veleno greitis (min.): 40 aps./min, įrankio skersmuo: 75 mm, įrankio ilgis: 250 mm, Įranga: dokumentacija / vadovas, sūkių greitis be galo kintamas, NEW vertical machining center "AWEA BM-1400 II" with FANUC 0i-MF Plus CNC Included accessories: - Prearrangement for rotary table - External air blow to the spindle - Left-side screw-type chip conveyor - Automatic high-pressure coolant system through the spindle at 20 bar - Workpiece cleaning gun - Enclosure floor flushing system - 390-liter coolant collection tank - Three-color end-of-cycle signal lamp - Full automatic shutdown Crsdpfx Ajrg Htpen Hsc

Būklė: naujas, Gamybos metai: 2022, Funkcionalumas: visiškai funkcionalus, TAKAMAZ CNC kompaktiškas įkroviklis FC60 Staklės su automatiniu įkrovimu/iškrovimu Grečiausia įkrovimo sistema pasaulyje Naujos detalės įkrovimo laikas – 2,8 sek. Įkrovimo galimybė iki 60 mm skersmens Maksimali įkrovimo ilgis 50 mm Maks. svoris – 1 kg kiekvienai pusei Cjdpsm E I D Hsfx An Herc Įkrovimo padavimas – 120 m/min Komplekte detalės apvertimo funkcija įkrovimui Fanuc valdymas Pilna 2 metų garantija Staklių specifikacija: Veleno variklis – 7,5/5,5 kW Didžiausias tekinimo skersmuo – 180 mm Didžiausias tekinimo ilgis – 240 mm Strypų įkrovimo galimybė – 35 mm Collet tipo griebtuvė 173E iki 40 mm skersmens Veleno flanšas A2-5 Veleno greitis – 4500 aps./min. Įrankio stotelės – 8 pozicijų Įrankio kotas – 20x20 mm Gręžimo laikiklio diametras – 25 mm Greitasis padavimas X/Z – 18/24 m/min. Staklių matmenys – 1,36 x 1,37 m Aukštis – 1,7 m Svoris – 2,7 t Bendra galia – 14 kVA Kaina EXW (Europos sandėlis), įskaitant pakrovimą į sunkvežimį. Transportavimas, montavimas, paleidimas, apmokymai ir metiniai priežiūros kontraktai galimi už papildomą mokestį. Montavimą ir apmokymus visada atlieka mūsų kvalifikuota aptarnavimo komanda trijose Europos lokacijose: Olandijoje, Vokietijoje, Rumunijoje.

Būklė: naujas, Gamybos metai: 2020, Clamping force: 600 kN Clamping platen: 460 x 460 mm Tie bar spacing: 300 x 300 mm Clamping stroke: 230 mm Ejector stroke: 70 mm Ejector force: 40 kN Mould height: 120–350 mm Tie bar diameter: 56 mm Injection force: 54 kN Injection stroke: 130 mm Injection piston diameter: 45, 50, 55 mm Casting volume (DIN 24480): 109, 150, 194 cm³ Specific injection pressure: 339, 274, 226 daN/cm² Associated parting surface: 176, 218, 264 cm² Machine weight: approx. 3.5 t Machine equipment: 1.0.1 Clamping unit cover on machine base 1.0.2 Clamping unit cover on machine base for scale/chute 1.1.0 Motorized safety door, casting direction left 1.4.0 Machine mountings 1.5.4 Interior machine lighting 1.11.0 Equipment package – energy efficiency 2.0.1 Advantage package ejector 2.4.2 Ejector plate lock, mould side 2.6.4 Machine assistance system SensiLock® 2.8.0 Hydraulic adjustment of clamping unit 3.1.1 Nitrogen pressure monitoring for accumulator 3.2.4 Multi-chamber holding and melting furnace 3.2.5 Insulated crucible cover for multi-chamber furnace 3.4.4 Casting system pre-fill 3.4.5 Simplified injection piston removal 3.4.6 Injection piston stop on return stroke 3.5.2 Electric nozzle and casting pot heating 4.5.0 Hydraulic assembly shut-off device 4.6.1.2 Integrated water circuit control, 2+4 circuits 5.1.0 Machine control DATADIALOG – RC 5.1.2 Equipment package – casting comfort 5.2.1 Ejector pressure graph 5.4.1 Data acquisition Scope 5.4.2 Programmable inputs and outputs 5.6.0 Special cable lengths 6.0.0 INTERFACES / OPERATING CONCEPTS 6.1.3.1 Digital interface for third-party extraction unit 6.1.4 Serial interface for 4 heating/cooling circuits 6.3.1.1 Operator unit with visualisation on support arm 6.5.2 Equipment package RSD with switch 7.0.0 ADDITIONAL DEVICES 7.2.2.2 Spraymotion 611 E with servo drive 7.2.10 Extended spraying programme 7.3.1 Release agent tank TD 20 7.4.0.2 Spray bar CR 245 Credpfx Ajiu Smben Hjc 7.12.3 Sound-insulated reject chute OF70 70 Years FRECH – Anniversary Package

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 600 mm, Y ašies eiga: 480 mm, Z ašies eigos atstumas: 310 mm, veleno greitis (maks.): 2 000 aps./min, veleno greitis (min.): 40 aps./min, plunksnos brūkšnys: 120 mm, bendras aukštis: 1 820 mm, bendras plotis: 1 780 mm, bendras ilgis: 1 400 mm, stalo plotis: 500 mm, stalo ilgis: 900 mm, ruošinio svoris (maks.): 190 kg, atstumas nuo stalo iki veleno centro: 390 mm, Įranga: dokumentacija / vadovas, Table surface (tilting table): 900 x 500 mm Codpfx Anshu Rwfe Herc Maximum workpiece weight: 190 kg Travel X: 600 mm Travel Y: 450 mm Travel Z: 380 mm Quill stroke Z1: 120 mm Spindle speed range: 40 - 2000 rpm Number of gear steps: 18 Drive power: 3.75 kW Tool taper: SK 40 (DIN 69871A) Weight approx.: 1,560 kg Including comprehensive standard accessories, such as: Work area enclosure 3-axis digital readout CONTUR Hydraulic tool clamping system for vertical spindle, tool holder SK 40, DIN 69871A, pull stud DIN 69872, including hydraulic unit Monitored spindle guard 3 conventional handwheels Complete electrical equipment for 400 V, 50 Hz three-phase current Ball screw drives for X, Y, and Z axes Vertical milling head Fixed tilting table 900 x 500 mm clamping surface Swivel device for vertical milling head LED machine lamp Protective bellows for vertical and horizontal guideways Automatic central lubrication for the axes and ball screw drives Coolant system with pump Set of 4 mounting elements Including tool holder package consisting of: 1 x ER40 collet chuck 7 x collets (Ø 6, 8, 10, 12, 16, 20, 25 mm)

Būklė: naudotas, TECHNICAL DATA - Number of axes: 7 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 20 [mm] - Max. machining length: 205 [mm] - Spindle speed: 10,000 [rpm] - Spindle drive power: 3.7 [kW] - Minimum C-axis resolution: 0.001 [degrees] SUB SPINDLE - Max. bar diameter: 20 [mm] - Spindle speed: 8,000 [rpm] - Spindle drive power: 2.2 [kW] - Minimum C-axis resolution: 1 [degree] - Number of tool holders: 1 TOOL HOLDER 1 - Number of stations: 10 - Number of driven stations: 4 FRONT TOOL SYSTEM - Number of stations: 7 BACKWORKING - Number of stations: 4 - Number of driven stations: 4 - Driven tool speed: 8,000 [rpm] ELECTRICAL SUPPLY - Supply voltage: 400 [V] - Total power: 7 [kW] WEIGHT AND DIMENSIONS - Floor space required: 2200 x 1200 [mm] - Machine height: 1700 [mm] - Machine weight: 2200 [kg] MACHINE HOURS - Power-on hours: 46,071 [h] - Operating hours: 33,799 [h] - Spindle hours: 20,194 [h] Crodexpi Igjpfx An Hjc ACCESSORIES - Control: Fanuc 30i-model A - HFT (High Frequency Turning) - Driven guide bush - Parts extraction - Parts conveyor belt - Parts ejector - Coolant tank - Bar feeder: FMB Turbo 3-26 / 3200 A

Būklė: geras (naudotas), Volelio skersmuo: 420 mm Išstūmimas: 405 mm Rušinio aukštis: 380 mm Pjovimo greitis: 16 - 2200 m/min Codexf Nahopfx An Herc Stalo tvirtinimo paviršius: 615 x 615 mm Juostos ilgis: 3450/3650 x 6-20 x 0,9 mm Darbo aukštis: 955 mm Įtampa: 380 V Bendras energijos poreikis: 3,0 kW Staklių svoris: apie 470 kg Reikalinga vieta: apie 1250 x 1000 x 2100 mm Iš mokomosios dirbtuvės Gera būklė (!!) Įranga: - tvirta vertikali juostinė pjovimo staklės - dažnio valdomas, bepakopis juostos pavara - juostos kreiptuvo aukščio reguliavimas rankiniu ratuku - IDEAL juostų suvirinimo įrenginys su žirklėmis ir šlifavimo varikliu - pasukamas stalas 15°/45° - staklių pagrindas - pasukama staklių lempa

Būklė: naudotas, TECHNICAL DATA - Max. bar diameter: 12.7 [mm] - Main spindle stroke (fixed/driven guide bush): 130/80 [mm] - Spindle power: 4 [kW] - Rotational speed: 12,000 [rpm] - Upper turret: 6 positions - Lower turret: 6 positions - Number of driven stations on turret: 6 - Max. diameter in sub spindle: 12.7 [mm] - Sub spindle rotational speed: 12,000 [rpm] - Dimensions: 2850 x 1100 x 1480 [mm] - Operating hours: 12,408 [h] - Main spindle hours: 9,400 [h] Crjdpfx Anjuhav Ds Hjc ACCESSORIES - CNC control TRAUB TX 8i - Bar feeder LNS Alpha ST 320 - C axis on main spindle and sub spindle - Brake for main spindle and sub spindle - Parts catcher with conveyor belt - Fire protection system - Coolant tank with pump and cooling unit - Chip conveyor - Various fixed and driven tool holders

Būklė: naudotas, Good day, We are offering used clamping devices from Erowa. These are part of the Erowa UPC system and are suitable for both sinker EDM and milling applications. The following items are available: - ER-048377 UPC alignment pallet Crjdpfxotk Haks An Hjc - Erowa T-slot pallet 320x320, base body made of aluminium, strips hardened and ground - ER-016917 UPC pallet, aluminium, 320 x 320 x 40, with clamping bar All items have been cleaned and inspected by us. In addition, a functionality test was carried out. The clamping devices show signs of use but are technically in very good condition. Individual items can also be purchased separately. Spare parts are available. Do you have any questions? We are happy to assist you.