Pusiau automatinis skersinis pjūklas CEMIL TR550

CEMIL TR550

Gamybos metai: 1963, Sąlyga: paruoštas naudoti (naudotas), Lifting capacity: 18 t, lifting height: 10,750 mm, span: 23,000 mm, weight: 35.1 t. The machine has been regularly maintained and inspected. Lhodpfoh I Edvsx Af Ijb

Gamybos metai: 2026, Sąlyga: naujas, VKM - Package Singulation for Milled Timber With the singulation of milled timber, whether loosely stacked or in a package, pre-milled timber can be processed further in an economical manner. In a two-stage process, the timber is separated for downstream processing. It is also possible to feed the singled-out timber into a running process in a controlled manner. Lhsdog Rxhgopfx Af Ieb The inserter is mechanically designed to reliably feed even crooked timber. Additionally, it can be adjusted to the diameter of the timber to ensure that only one piece is transported further, thus preventing downtimes in the subsequent process.

Sąlyga: naudotas, Gamybos metai: 1999, veikimo valandos: 3 400 h, mašinos/transporto priemonės numeris: 261724855, TRACTOTECHNIK GRUNODRILL 10S Year: 1999 Operating hours: reading - Borehole diameter: max. 385 mm - Maximum torque: 2,500 kN - Pulling force: 96 kN - Thrust force: 65 kN - Maximum drilling length: 250 m - Power: 90 kW - Drill rods and bits included - Complete equipment with separate engine, hydraulic unit, and drilling fluid tank - Perkins engine 119 kW / 162 HP This offer is non-binding; errors and omissions excepted. Only the specific agreements in the order confirmation or purchase contract are valid. The basis for this contract is exclusively our General Terms and Conditions (GTC), which are available at any time on our website or upon request. Place of jurisdiction is Eberswalde, Germany. If you have any questions, please do not hesitate to contact me. Lodpfehd I S Ujx Af Iohb Further information Intended use: Construction/Engineering

Gamybos metai: 1984, Sąlyga: labai geros būklės (naudotas), Blade diameter: 550 mm Minimum cutting length: 500 mm Minimum cutting width: 100 mm Maximum cutting height: 160 mm Minimum cutting height: 40 mm Pneumatic clamps Lodolrtntopfx Af Iehb

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2001, Basic information Manufacturer TOS SVITAVY Model PKSN 32 B Category Multirip saws Shipping Delivery To be agreed Semesters Technical parameters Maximum working width #### mm 400 Machine with simultaneous transport and processing of the workpiece Machine has CE marking Lhedpfohixkhex Af Ieb Used machine Minimum working length #### mm 330 Motor power #### kW 55 Supply voltage #### V 380-400 Guards Fully refurbished Electronically controlled adjustments Technically operational Excellent condition Spindle diameter #### mm 70 Single tool spindle With noise-reducing enclosure Cast iron body Feed speed #### m/min 36 Spindle lock Maximum cutting height #### mm 160 New electrical system New mechanical components New pneumatics New appearance/finish Noise level #### dB 70 Bidirectional rotation (right and left) Automatic adjustment Very good condition Cutting width #### mm 400 Machine width #### mm 1800 Processing width Saw blade diameter #### mm 400 Machine weight #### kg 3500 Machine dimensions #### x #### x #### mm 1600x1800x2500 Cutting height Processing height #### mm 160 With freely adjustable feed speed With in-machine workpiece transport

Sąlyga: labai geros būklės (naudotas), Станок для округления заготовок при производстве столбов/колов. Диаметр готового изделия от 40 до 140 мм. Станок был отремонтирован: заменены подшипники, установлены новые шестерни обратных плеч, переоборудован электрический шкаф и установлен новый оптический датчик для контроля пневматического давления, частично обновлена пневматическая система (установлены 3 новых цилиндра). Lodpfx Afsuvg Hto Ishb

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2012, Shaft Multi-blade Saw WALTER WD 250/350 30 and 37 kW - Made in Poland - Year of manufacture: 2012 - Technical documentation (DTR) and CE certificate TECHNICAL SPECIFICATIONS: Cutting height: 170 mm Cutting width: 350 mm Spindle diameter: 2 x 70 mm Saw blade diameter: 300 mm Spindle motor: 30 kW and 37 kW Feed motor: 1.5 kW Seven lower feed rollers Two upper toothed feed rollers Infeed table length: 3000 mm Lhjdpfx Aemv Elpef Ieb Connector diameter for waste extraction under machine: 2 x 200 mm (belt conveyor) Dimensions (L/W/H): 320 / 200 / 200 cm Weight: 2000 kg

Sąlyga: naudotas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2019, veikimo valandos: 2 444 h, keliamoji galia: 1 000 kg, kėlimo aukštis: 2 700 mm, kuro tipas: elektrinis, stiebo tipas: dupleksas, statybinis aukštis: 1 850 mm, šakių ilgis: 1 150 mm, pavaros tipas: Elektro, Aukštuminis krovinių krautuvas Krovinių svorio centras: 600 Stiebo tipas: Duplex Būklė: Paruoštas naudojimui ir visiškai veikiantis Techninė būklė: gera Priekinės padangos tipas: Poliuretanas Galinės padangos tipas: Poliuretanas Baterijos įtampa: 24V Baterijos tipas: Ličio jonų Baterijos pagaminimo metai: 2019 Lhedpfx Afovtu A Ue Iob Aprašymas: Integruotas įkroviklis, sulankstoma operatoriaus platforma

Sąlyga: naujas, SERRMAC ETD 22 - PGM Column Drill Rotating table + vise Precise, quiet, and reliable Direct transmission via INVERTER without pulley change Precision spindle shaft with hardened Morse taper Power supply: 380V 3-phase Ledpfsgyggzsx Af Iohb Ground (precision finished) column. Standard configuration: • Digital display with spindle speed indication • Tapping function with adjustable working depth • 24V LED lighting system • Electronic membrane control panel • Spindle rotation direction reversal button Drilling capacity in steel (mm): Ø 22 Tapping capacity: M16 Taper fitting: MT2 (Morse Taper 2) Column diameter (mm): 98 Spindle travel (mm): 120 Transmission: Direct with inverter Number of speeds: Variable Spindle speed (rpm): 265–4200 Motor: 1.8–2.5 kW / 380V Three-phase Power supply: 380V 3-phase Weight: 240 kg (column)

Sąlyga: naujas, Gamybos metai: 2025, Dimensions (L x W x H): 920 x 760 x 1000 mm Weight: 250 kg Total power requirement: 5.5 kW Round Rod Milling Machine FS-60 - Working range: 10 - 60 mm - Minimum workpiece length: 300 mm Lhjdpfxovz Hdme Af Ieb - Milling motor: 4.0 kW - Feed motor: 1.5 kW - Voltage: 400 V / 50 Hz - Speed: 3000 rpm - Feed speeds: 6, 9, 13, 16 m/min - Dimensions (L x W x H): 920 x 760 x 1000 mm - Weight: 250 kg - Includes cutter diameter 35 mm with carbide blades and 2 outfeed rollers OPTIONAL: - Cutter diameter 10 mm with carbide blades and 2 outfeed rollers €395.00 - Cutter diameter 15 mm with carbide blades and 2 outfeed rollers €395.00 - Cutter diameter 20 mm with carbide blades and 2 outfeed rollers €395.00 - Cutter diameter 25 mm with carbide blades and 2 outfeed rollers €395.00 - Cutter diameter 30 mm with carbide blades and 2 outfeed rollers €395.00 - Cutter diameter 35 mm with carbide blades and 2 outfeed rollers €395.00 - Cutter diameter 40 mm with carbide blades and 2 outfeed rollers €395.00 - Cutter diameter 45 mm with carbide blades and 2 outfeed rollers €395.00 - Cutter diameter 50 mm with carbide blades and 2 outfeed rollers €395.00 - Cutter diameter 55 mm with carbide blades and 2 outfeed rollers €395.00 - Cutter diameter 60 mm with carbide blades and 2 outfeed rollers €395.00