Pakuočių atskyrimas frezuotoms medienoms

VKM

Būklė: naujas, Gamybos metai: 2025, VKM supplies spare parts for VKM, Oswald (the full delivery range), and selected Bezner-Oswald and Wema Probst machines, as well as BÖGLI bandsaws and replacement knives manufactured according to drawings for a variety of woodworking machines. Some parts are available from stock. Below are some of the most frequently requested parts: Centring rollers, 40mm bore €112.00/each Dedpfewagxmex Amyokp Centring rollers, 50mm bore €156.00/each Feed roller, 40mm bore €118.00/each Feed roller, 50mm bore €138.00/each Discharge roller, 40mm bore €102.00/each Feed roller, 50mm bore €126.00/each Bezner WP35 peeling disc €3,920.00/each Oswald RM162 guide carriage RM7072W €302.00/each Oswald RM162 knife holder RM7066W €215.00/each We are happy to provide a quotation including commercial terms. Further spare parts available on request.

Būklė: visiškai atnaujintas (naudotas), 100,000 L Buffer Storage Tank / Pressure Vessel, standing on base ring Tank specifications: Capacity: approx. 100,000 litres Operating pressure: max. 2 bar Operating temperature: max. 90°C Dodpfewf N Stox Amyokp Internal diameter: 3,000 mm Total height with feet: approx. 16,750 mm Ground clearance: approx. 800 mm Tank with dished ends (Klöpper heads). Tank equipment: ⦁ 1 manhole DN 600 with blind cover ⦁ 7 x 3/8'' pipes, sealed inside the tank, open on the outside ⦁ 2 lifting lugs on the cylindrical shell ⦁ 2 lifting eyes on the top end ⦁ 2 lifting lugs on the tank feet ⦁ 1 drainage port 2'' led to the side wall, fitted with ball valve ⦁ 1 vent Ø33.7 x 3.6 mm, run outside the insulation laterally down the tank, fitted with ball valve ⦁ 1 connection DN 125, ends externally with flange, internal end centrally in the tank with 90° bend ⦁ 1 connection DN 125, ends externally with flange, internal pipe routed upwards and terminated centrally in the tank via two 90° bends We are happy to offer tank insulation (new) in any required thickness upon request. Feel free to contact us if you are interested!

Būklė: naujas, VKM supplies spare parts for the complete range of VKM and Oswald equipment, as well as selected Bezner-Oswald and Wema Probst machines, BÖGLI band saws, and custom replacement knives produced to drawing for a wide variety of woodworking machines. Many items are available from stock. Below is a list of some of the most frequently requested parts: Centering rollers, 40 mm bore €112.00/each Centering rollers, 50 mm bore €156.00/each Feed roller, 40 mm bore €118.00/each Feed roller, 50 mm bore €138.00/each Discharge roller, 40 mm bore €102.00/each Feed roller, 50 mm bore €126.00/each Dedpsg Rn Avjfx Amyokp Bezner WP35 peeling disc €3,920.00/each Oswald RM162 guide slide RM7072W €302.00/each Oswald RM162 knife holder RM7066W €215.00/each We will be happy to provide a quotation including commercial terms. Additional spare parts are available upon request.

Būklė: naujas, Gamybos metai: 2026, Palisade, post or round timber – always a perfect result. The VKM round bar milling machine, designed with a proven concept. Dkodpfxefw Ay No Amysp Innovation doesn’t stop at round bar milling machines. Our models for cylindrical milling of logs feature a number of new developments. Their modular construction allows any business to precisely select the size and configuration best suited to their specific woodworking requirements. Precision round timber processing for every log. Technology: All roller pairs are operated for opening and closing via a valve manifold – eliminating all mechanical diameter adjustments. This removes unnecessary recalibration when changing setups. And if a log happens to be thicker than usual, it’s no longer an issue. Soft starters allow the milling motors to ramp up gently before reaching full power. Alternatively, and particularly useful for unstable power supplies, a frequency inverter can be provided to manage start-up. With a processing range from 30 up to 400 mm across all models, these milling machines meet even the most demanding requirements. Efficiency: You determine your pace and productivity: first by choosing between a single-head or double-head milling machine. For perfect surface quality, VKM machines operate their milling heads at higher rotational speeds. All components were modeled using finite element analysis, which reduces the number of parts and thus the risk of malfunction. The high rotational speeds of the milling heads also guarantee fast cutting speeds. Depending on the model, feed speeds of up to 35 m/min are achievable. The benefits? More speed, more precision, more performance. Safety: Simple operation is ensured by the central control panel. Mounted pressure regulators for each roller section are located right beside it. Feed speed can be reduced at any time if needed. All doors are fitted with electronic interlocks and can only be opened once the machine stops. All these features provide maximum operator safety while maintaining peak performance in daily operation.

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, veikimo valandos: 500 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 25-029, bendras plotis: 800 mm, bendras ilgis: 4 700 mm, bendras aukštis: 1 900 mm, įvesties srovės tipas: trifazis, energijos suvartojimas: 2 kWh, Very good metal separator for separating all metals (including stainless steel, V2A) from a material stream. Can be used before or after a non-ferrous separator (eddy current separator) or as a stand-alone machine. Separation of all metals from approximately 1 mm particle size. Suitable for metal content up to 60%. Unique flap technology (flipper), no compressed air required. The machine is immediately operational, can be inspected and tested. Camera option available upon request! If the machine is too small, we can also manufacture larger models. This is our demonstration machine. Maximum throughput depends on material and application. Dedpfx Ameqabm Esyjkp Price negotiable!

Gamybos metai: 2026, būklė: naujas, The pointing machine was primarily developed for small and medium batch sizes with manual feeding, featuring the following technical data: Sometimes things can be quite simple: this mechanical pointing machine was specifically designed for quick and practical feeding under manual operation. The drive system for the hydraulic pump is available either with a powerful 7.5 kW electric motor or with a PTO shaft connection. Therefore, it is perfectly suited for producing small and medium quantities of fence elements, wooden stakes, and palisades. Ideal for flexible landscaping applications or urgent timber construction projects. It can process all types of milled and peeled timber. Even curved weak timber or tree trunks with bark pose no problem for the sharp blades. Maximum timber diameter: 270 mm Dsdpfxofw A D No Amyjkp Shortest timber length: 1.15 m 5 chiseling angles selectable For milled, peeled, and untreated timber Capacity: 150 to 250 posts/hour Cylinder force: 2 x 10 tons Oil pressure: 200 bar Drive options: - Electric motor 7.5 kW - PTO shaft - Tractor oil pump

Būklė: naujas, Gamybos metai: 2026, Simply outstanding – and virtually automatic The automatic pointing machine from VKM The innovative power of the automatic pointing machine makes it possible: this machine combines pointing, chamfering, and cross-cutting into just a few efficient work steps and within a single cycle time. Behind it is a sophisticated system that performs all production steps with maximum precision at the highest speed. Perfect for all round timbers that have already been milled and/or peeled and are awaiting their final shape as posts, stakes, or palisades. Efficiency Dksdpfx Amohm S Rueysp The round timber pointing machine is available as a single-length or double-length model. Both models allow three process steps—cross-cutting, pointing, and chamfering—to be performed fully automatically and simultaneously. Without interrupting the production flow: for example, the single-length machine can process up to 4,000 wooden posts or more per shift. The high-performance geared motors are driven via frequency converters to achieve maximum performance—for top speed during cutting and optimized cycle times. This is particularly advantageous when handling different diameters: the processing speed can be easily adapted to the round timber.

Būklė: naujas,

Būklė: naujas, Gamybos metai: 2026, X ašies padavimo greitis: 30 m/min, • Wood diameter (machine-specific): possible diameter range 40 to 200 mm • Feed speed up to 30 m/min Dkedpfx Aowzwifemysp • 3 infeed rollers for centering the log • 2 outfeed rollers • 1 saw blade • Saw drive motor: 7.5 kW • Feed motor: 1.5 kW

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, VKM – žievės lupimo mašina PS2000 Medienos skersmuo: 40 – 200 mm Dkedpfx Amev Uxm Teyop Lupimo disko skersmuo: 458 mm Lupimo peilių skaičius: 8 Padavimo greitis: 5 – 15 m/min Oro sunaudojimas: apie 60 NL/min Lupimo disko apsukos: 1500 aps./min. Lupimo disko variklio galia: 15 kW Apatinio padavimo volo variklio galia: 0,37 kW Viršutinio padavimo volo variklio galia: 0,37 kW Elektrinis apvalios medienos diametro reguliavimas kojiniu pedalu, galima reguliuoti ir darbo metu

Būklė: naudotas, Gamybos metai: 2019, MAKSIMALUS SMULKINIMO SKERSMUO 250 MM VARIKLIO GALIA 75 kW SMULKINTUVO BŪGNO PLOTIS 640 MM SMULKINTUVO VOLELIO SKERSMUO 660 MM VIRŠUTINIO VOLELIO PLOTIS 640 MM Dedpfxeyffi To Amyokp MAKSIMALI VIRŠUTINIO VOLELIO ANGA 600 MM PEILIŲ KIEKIS ANT MAŠINOS: 3 PADAVIMO VOLELIAI: 2