Dvipusės tenonavimo staklės CELASCHI

CELASCHI

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2023, 2/3 Layer Parquet Profiling Line Lodpfelaxinex Akvsrn Min/Max Width: 80-400 mm Min/Max Length: 500-3000 mm 4+4 Motors per side Line fully overhauled and supplied with warranty. Possibility to customise the machine according to customer requirements.

Būklė: labai geros būklės (naudotas), WEINIG Hydromat H23 Line, S/N 87321, Year of manufacture 1999, Ref. No. 103437 WEINIG Cross Conveyor HighMech E-1, with 6 flat chains, approx. 2000 x 3500 mm Hydraulic WEINIG Accelerator Model 814 Short infeed table with heavy-duty 4-roller feed system Planer with reinforced KASCHWIG three-sided soundproof enclosure • Max. working width: 230 mm • Max. working height: 160 mm • Electronic, frequency-controlled feed: 8 – 80 m/min • Feed motor: 18.5 kW • 1st spindle bottom: 11.0 kW • 2nd spindle right: 11.0 kW • 3rd spindle left: 11.0 kW • 4th spindle right: 11.0 kW • 5th spindle left: 11.0 kW • 6th spindle top: 15.0 kW • 7th spindle bottom: 11.0 kW • 8th spindle top: 15.0 kW • 9th spindle bottom: 15.0 kW • 10th spindle universal: 11.0 kW (four-sided) • Spindle speed: 6,000 rpm • Spindle diameter: ø 50 mm • All spindle motors equipped with NEW motor start/brake combos • Pneumatically supported pressure rollers from above • Feed rollers D=140 mm • 6 driven rollers in the table • Spindles 1, 6, 7, 8, 9 with counter bearings • Spindles 8 & 9 with straight jointer • Spindles 8 & 9 with profile jointer • Spindles 6 & 8 with pneumatic pressure • Reduced roller pitch on feed system • Hard-chromed table plates • Hard-chromed fences • Pneumatically supported lateral pressure rollers • Automatic table lubrication • Central lubrication points • Freestanding operating panel • Total connected load approx. 145 kW / approx. 400 A • Freestanding control cabinet • Operating manual, spare parts list, and circuit diagram included • Machine delivered without planer heads Machine dimensions approx.: • Length 6,000 mm • Width 2,250 mm • Height 1,800 mm • Weight approx. 8,500 kg Factory-new WEINIG components installed: NEW horizontal / vertical spindle Lsdpowvqkljfx Akvjrn NEW counter bearings All spindles with HL bearings All motors fitted with NEW bearings NEW electronic motor soft start / braking devices NEW hard-chromed table plates NEW hard-chromed fences Many additional NEW PARTS fitted in the machine Condition: See attached photos – technically in first-class condition Infeed mechanisation unrefurbished – all parts complete and functional Payment: Net cash prior to loading Delivery time: By arrangement Delivery: EXW Inspection: Possible anytime by appointment Subject to prior sale and errors excepted.

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1998, Funkcionalumas: visiškai funkcionalus, darbinis plotis: 3 000 mm, bendras svoris: 5 000 kg, įėjimo įtampa: 380 V, Įranga: dokumentacija / vadovas, Dviguba formatavimo staklė Celaschi TSA300DS Lrsdpfx Akozfvtnevon Slankiojančios dalies atidarymas 3000 mm iš lietimui jautraus ekrano Minimali darbo plotis 200 mm 5+5 variklių grupės Slankiklio plotis 65 mm Vilkimo kaiščiai žingsniu 400 mm Pneumatinė toupie grupės įsikišimas Automatinis CN valdomas įsikišimas Reguliuojamas tiekimo greitis (min/maks) (m/min) 4-24

Būklė: naudotas, mašinos/transporto priemonės numeris: 007960, Formatinė diskinė pjūklas: 1 ir 2 mašinos Lsdpjwl Dniofx Akvorn Didžiausias plokštės aukštis: 200 mm Didžiausias padavimo greitis: 36 m/min Atstumas tarp griebtuvų: 450 mm

Būklė: naujas, Gamybos metai: 2021, For sale is a new Nicholson A6/35" 5-arm machine with roller drive. The machine is still in its original packaging. Assembly and commissioning can be carried out by us. Lrsdpfxewt T Unj Akvjn

Būklė: labai geros būklės (naudotas), I am selling a double-end profiling milling machine CELASCHI TSA 300. Working width up to 3000 mm Feed speed 3–18 m/min Configuration left side / fixed: Lrjdpfxsvxu Uhs Akvsn - 1 pcs. cutting unit 4.0 kW - 1 pcs. milling unit 5.5 kW Configuration right side / movable: - 1 pcs. cutting unit 4.0 kW - 1 pcs. milling unit 5.5 kW Material hold-down conveyor with top-feed system. Throughfeed machine. Condition: Very good. Fully operational. Available immediately.

Būklė: visiškai atnaujintas (naudotas), COMPLETTE ODER TEILE DER CELASCHI DET ZUFEEDERKETTEN, VOLLSTÄNDIG ÜBERHOLT Lsdpfx Akjv Hmyxovorn

Būklė: naudotas, Gamybos metai: 2018, Startech CN MAIN FEATURES FLEXIBLE AND INDIVIDUALLY CONFIGURED PRODUCTION COMBINED WITH SPEED AND PRECISION DRILLING FROM ABOVE WITH REFERENCE TO THE TOP SIDE OF THE PANEL ALLOWS FOR ABSOLUTE PRECISE PROCESSING NUMERICAL CONTROL WITH 7" COLOUR SCREEN: SIMPLE AND INTUITIVE TECHNICAL DATA Startech CN AXES Max. workpiece dimensions X-Y-Z mm 3050 x 800 x 50 Min. workpiece dimensions X-Y-Z mm 300 x 90 x 10 Working area drilling/grooving mm 0 x 800 / 0 x 800 Stroke of X-axis mm 750 Max. traversing speed X-Y axes m/min 25 DRILLING UNIT Vertical spindles number 7 (4X-4Y, one shared) Horizontal spindles (along Y-axis) number 2 (1+1) Horizontal spindles (along X-axis) number 1 Fixed groove saw (direction) X Diameter of groove saw mm 100 Max. thickness of groove saw mm 5 Motor power kW (HP) 1.5 (2) Spindle speed rpm 3350 Groove saw speed rpm 4300 INSTALLATION Power supply V (Hz) 380 / 400 (50 / 60) Installed power KVA 4.5 Compressed air requirement bar 6 Compressed air consumption Nl/cycle 90 Extraction requirement m³/h 1200 Extraction air speed m/sec 20 Extraction connection diameter mm 120 GENERAL FEATURES Universal CNC drilling machine with a working table with fixed gantry and moving workpiece for performing the following operations: - Vertical drilling on the panel surface - Horizontal drilling on all four workpiece sides - Grooving with an integrated groove saw in the 'X' direction Self-supporting structure Machine base made of steel tubular construction to provide a large base for accommodating the working table. The structure rests on 3 self-levelling feet. The electrical control cabinet is integrated into the machine base. Central Bakelite support table 'Easy Motion': - an MDF sector for through drilling, automatically retractable for horizontal drilling - an infeed roller to facilitate panel loading - a rear roller track to ease panel sliding - left and right stops - a central alignment device with manual adjustment The left and right stops must be used to drill horizontally in the 'X' direction on the two opposite panel sides. Panel positioning along the X-axis is via vacuum suction cups. Aggregates carrier This is a gantry structure made from steel tube. The main working unit is installed on the gantry. F10L drilling unit includes: - 7 independent vertical spindles - drill shank D10 mm - spindle pitch 32 mm - 2 horizontal drilling heads, 1 in X direction with one drill bit, 1 double drilling head in Y direction (1 + 1, drill shank D10 mm) - Speed 3350 rpm - 1 integrated sawing unit in X (max. diameter 100 mm) - Saw blade speed 4300 rpm - Motor power 1.5 kW - pneumatic vertical travel per spindle 70 mm - pneumatic horizontal travel of the drilling unit Workpiece positioning and drive of the working unit A CNC-controlled vacuum cup clamps and positions the workpiece sequentially under the working unit during processing. Movement along the X and Y axes is on THK guides with motion transmission via reinforced toothed racks. Z-axis movement is pneumatic on ball-bushing guides with stop position adjustable via the unit's positioning. Working unit positioning uses advanced drive and technology. -CONTROL The control software is specifically designed for use Lrjdpsvwbp Aofx Akvon

Būklė: labai geros būklės (naudotas), Solo Machine - Universal Machine (First & Second in a production line) Second DEP in the line X10023 Electronic control OMRON Separate control panel and operator console Protective and soundproof cabin No. 3+3 vertical support columns for working units As the second machine, it accepts panels with a depth of 1900 mm Min. useful working width (mm): 300 Max. useful working width (mm): 2500 Min. useful working thickness (mm): 6 (approx.) Max. useful working thickness (mm): 60 Cam distance (mm): 400 Adjustable feed speed (min/max) (m/min): 4-24 Total power Kw: 65 Ljdpfxjyz Si Hs Akvorn No. 3 working units (for each side of the machine): - No. 1 universal milling unit (electropneumatically controlled), shaft length mm 300, belt-driven motor (9.2 kW at 3000 rpm) - No. 1 universal milling unit (electropneumatically controlled), shaft length mm 300, belt-driven motor (9.2 kW at 3000 rpm) - No. 1 universal milling unit (electropneumatically controlled), shaft length mm 300, belt-driven motor (9.2 kW at 3000 rpm) NOTE: These three vertical universal milling units are CNC-controlled with horizontal and vertical adjustment. - Free space

Būklė: labai geros būklės (naudotas), Solo machine - Universal machine (First & Second in a machine line) First DEP in line X10023 Electronic control OMRON Separate control panel and operator console Protective and soundproof cabin No. 2+2 vertical support columns for working units Min. usable working width (mm): 300 Max. usable working width (mm): 2000 Min. usable working thickness (mm): 6 Max. usable working thickness (mm): 60 Lrjdpfx Akoyz Siajvjn Cam distance (mm): 400 Adjustable feed speed (min/max) (m/min): 4–24 Total installed power (kW): 60 No. 4 working units (per machine side): - No. 1 universal milling unit (electro-pneumatically controlled), shaft length 300 mm, belt-driven motor (9.2 kW at 3000 rpm) - No. 1 universal milling unit (electro-pneumatically controlled), shaft length 300 mm, belt-driven motor (9.2 kW at 3000 rpm) - No. 1 universal milling unit (electro-pneumatically controlled), shaft length 300 mm, belt-driven motor (9.2 kW at 3000 rpm) NOTE: These three vertical universal milling units are CNC-controlled with horizontal and vertical adjustment. - No. 1 standard universal milling unit (1.5 kW at 1470 rpm)

Būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, double tenoner, double drilling machine, step-by-step Equipped with: 1+1 saw units 1+1 milling units 1+1 drilling units max length: 2500 mm Lrjdew A A E Ispfx Akvon

Būklė: labai geros būklės (naudotas), Independent machine - Universal machine (First & Second in a machine line) Electronic control – EasyLing programmer Safe and soundproof casing No. 3+3 vertical columns to support the working units Min. useful working width (mm): 240 Max. useful working width (mm): 3,100 Min. useful working thickness (mm): 3 Max. useful working thickness (mm): 150 Retractable positioning cams, spacing (mm): 800 Feed rate (min/max), stepless adjustment (m/min): 4 – 24 Total power No. 4 machining groups (for each side of the machine): Scoring unit Ledpfx Akswhmdfsvern Automatic scoring unit 1 x 3 kW (6,000 RPM) Planing unit 1 x 6 kW (6,000 RPM) 0–10° Universal milling unit (electropneumatically controlled) 1 x 6 kW (6,000 RPM) 0°–90° Universal milling unit 1 x 6 kW (6,000 RPM) 0°–90°

Būklė: labai geros būklės (naudotas), Independent machine - Universal machine (First & Second in a production line) Electronic control with programmer Separate electrical and control panels Safety and soundproof enclosure No. 1 vertical column for supporting the working units Min. usable working width (mm): 220 Max. usable working width (mm): 3000 Lsdpfx Asgz Alxekvjrn Min. usable working thickness (mm): 6 Max. usable working thickness (mm): 60 Retractable stop cams, spacing (mm): 400 Feed speed (min/max), infinitely variable (m/min): 4–24 Total installed power: 40 kW No. 3 working units (per side of the machine): 1 automatic scoring unit: 2.2 kW / 3.2 kW 1 cutting unit: 5.5 kW / 7.3 kW (RPM: 3000 / 6000) 1 universal milling unit (electropneumatically controlled): 4 kW / 5.8 kW (RPM: 3000 / 6000)

Būklė: naujas, Tipas: 1300-2S Darbinis plotis: 1300 mm Minimalus ruošinio ilgis: 400 mm Darbinis storis: 2–80 mm Šlifavimo veleno greitis – su dažnio valdymu Lodpfx Akom Dr Rgevjrn Padavimo greitis: 5–20 m/min Bendra variklių galia: 6,27 kW Transporto matmenys: 1700 x 2100 x 1400 mm Svoris: 1200 kg Kaina: 6100 Eur (EXW Jonava, Lietuva)

Būklė: labai geros būklės (naudotas), 4-sided DOUBLE END TENONER LINE currently configured for INTERIOR DOORS, consisting of the following machines: X10023A) CELASCHI powered roller conveyor for feeding Lodpewzmbqofx Akvorn X10023B) CELASCHI DOUBLE END TENONER Model TSA 3 B 480 A installed total power: 65 kW X10023C) CELASCHI 90° transfer (L-shaped powered roller conveyors) X10023D) CELASCHI DOUBLE END TENONER Model TSA 2 B 360 installed total power: 65 kW