Dvigubo galo tenoneris - viena mašina

CELASCHI PROGRESS CR75-4050

Būklė: naujas, Gamybos metai: 2026, No matter what job you need to cut, the A700 is the only saw you'll ever need. With the largest cutting capacity in its class and an extensive ±75º mitre angle range, the A700 is engineered for high-precision, high-angle mitre cuts—without limiting the profile sizes you need to process. This saw is ideal for bundle-cutting multiple aluminium profiles simultaneously, delivering exceptional accuracy. Enjoy high-speed aluminium processing with precise PLC-controlled movements. The pneumatically actuated safety guard opens and closes at the press of a button, granting full, unobstructed access to the saw table. An integrated safety switch disables operation whenever the guard is lifted, ensuring maximum workplace safety. Optional CNC-controlled saw mitre angle positioning is available, complete with intuitive touch-screen controls. • Ø700 mm TCT saw blade with 4 kW drive motor • AS / NZS 4024:2014 safety compliance, two-hand operation for cutting • Overhead safety guard with 900 mm safety tunnels on each side • Guard lifts pneumatically at the push of a button • Safety switch disables saw operation if guard is raised • 2× vertical clamps and optional 2× horizontal clamps with adjustable pressure settings • Mitre angle adjustment ±75°, positive stops at 0°, ±15°, ±22.5°, ±30°, ±45°, ±60°, ±75° Fjdjmb U Tuepfx Aaiogf • Spray-mist blade lubrication system • Air gun and LED interior workspace lighting • 2 × Ø100 mm chip extraction outlets • Optional 2.2 kW dust extraction unit • Optional automated mitre control system Ideal for: • Mass aluminium fabrication • Mitered aluminium structure production • Window and door manufacturing • Blinds, shades and furniture production • Engineered aluminium assemblies • Aluminium façade construction

Būklė: labai geros būklės (naudotas), DOUBLE-SIDED LOADING STATION Vacuum system (with pump) No. 2 vertical support columns for the upper support beam No. 1 upper horizontal support beam (with sliding carriage) No. 1 motorized carriage with horizontal metal arms External roller conveyor (at floor level) for feeding the stack of panels to the loading station Fgodpfx Aofi Tg Hjaief External motorized roller conveyor (for receiving panels from the loading station) Separate electrical control panel Perimeter safety fence with safety mats Operating capacity (cycles / min) approx. 16 Panel thickness (min/max) mm 10 / 50 (approx.) Min. panel dimensions mm 250 x 320 (approx.) Max. panel dimensions mm 1300 x 3000 (approx.) Total connected load kW 30

Gamybos metai: 2000, būklė: geras (naudotas), Barberan Laminating Line For all inquiries, please contact: 790800714 The line is in continuous operation. Maximum laminating width: 1300 mm Minimum thickness: 3 mm Maximum thickness: 40 mm Maximum element length: 2800 mm Minimum element length: approx. 600 mm Continuously adjustable speed from the brushing machine, maximum speed: 20 m/min. The line includes: - Tommassini automatic loader (not operational) - Top and bottom brushing machine - Pre-heating lamps for the top and bottom glue rollers - PVAC glue applicator - Additional top and bottom drying lamps Fsdpfeilqvrox Aaiegf - Steel calender line for pressing - Additionally, the line is equipped with a purchased corona treatment unit for the upper surface (functional) – allows for single-side laminating with PP films

Gamybos metai: 2001, būklė: beveik kaip naujas (naudotas), Double-belt sander, two lower sanding heads, each with a main motor of 2 x 7.5 kW, feed motor 4 kW, lifting and lowering motor 2 kW. The machine has been refurbished. The conveyor belt is in very good condition. The graphite shoe is new. The machine features two lower units: the first is a rubber contact roller, and the second is a combination unit with a graphite shoe. Working sanding width is 630 mm. Two feed speeds: slow and fast. Sanding belt length is 1900 mm. Pneumatic oscillation system. Pneumatic belt tensioning. Sanding belt speed is 18 m/s. Conveyor belt feed speed is 9/20 m/min. Number of sanding shoes: 1. CE conformity declaration. Rated total power: 21 kW. Maximum workpiece height: 160 mm. The machine is equipped with two lower working rollers. The conveyor belt operates from above. Fgedpfsfxpbmex Aaisf

Būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, double tenoner, double drilling machine, step-by-step Equipped with: Fgedpsw A A E Isfx Aaisf 1+1 saw units 1+1 milling units 1+1 drilling units max length: 2500 mm

Būklė: naujas, Vacuum Lifter BARBARIC B3, pivotable, incl. crane - Demonstration unit - Included: - Vacuum lifter BARBARIC uniWood UWL 3, 150 kg capacity Vertical and horizontal handling of flat, standard commercial boards (laminated boards, natural wood boards) up to a board size of 3,000 x 2,100 mm - Tilting range of 90° with pneumatic tilt mechanism - Complete version with hoist and appropriate safety devices (vacuum gauge and hand-operated slide valve with mechanical lock) - uniWood crossbeam with 2 suction pads Ø 270 mm on an adjustable beam (beam length: 1,500 mm) Included: - Option: reinforced version BARBARIC uniWood for slightly porous panels Load capacity: 250 kg with 2 oval suction pads, 500 x 250 mm, on an adjustable beam (beam length: 1,250 mm) and reinforced vacuum pump for porous materials. The reinforced version enables lifting of materials up to 250 kg. Included: - Option: BARBARIC uniWood comfort control All controls for the hoist and the vacuum lifter are combined in a single control unit—our special handling grip. This allows single-handed operation of the system and the load. The lifting process can be continuously regulated via frequency converter. The comfort version comes complete with hoist and corresponding safety devices (vacuum gauge and two-button safety control for load release). Included: - BARBARIC column-mounted slewing crane Load capacity at hoisting device: 250 kg The specified capacity refers to the effective load at the hoist. Barbaric slewing cranes are designed for handling tasks in all application areas and are extremely lightweight in construction. Fgjdpfxou R Szaj Aaisf SSK consisting of column, console, and low-friction jib arm. Manual slewing and trolley travel. A suitable reinforced concrete floor (C20/R5, min. 20 cm) is required for installation. The static assessment of the floor must be provided and documented by the client. For installation on cracked concrete or ground with low load-bearing capacity, larger base plates are available upon request. Mounting: supplied with adhesive anchors for concrete floor. If ordered without hoist, please specify the desired cable or hose arrangement! Delivery includes: trolley, power supply, and compressed air connection. - New exhibition machine -

Būklė: naujas, Gamybos metai: 2025, mašinos/transporto priemonės numeris: 712520122, FRUMECAR ECA 3000 fully mobile concrete plant Condition: NEW Capacity: 120 m³/h Mixer: Sicoma MAO Mixer size: 3 m³ Cement silos: 2 x 55 t Warranty: 1 year from commissioning More machinery and mixing plants available on our website Further information Intended use: Construction industry, Applicable material: Concrete, Overall condition: Very good, Technical condition: Very good, Visual condition: Very good, Fjdpfx Aashd Na Ueiogf

Būklė: naudotas, mašinos/transporto priemonės numeris: 007928, Pozicija 1: Šepetėlinė mašina CEFLA-EASY 2000 + TR2V-FV3 Fjdpswu Ackjfx Aaiegf Pozicija 2: Lako dengimo mašina CEFLA-EASY 2000 + TR2V-FV3 Pozicija 3: Lako džiovintuvas CEFLA-EASY 2000 + TR2V-FV3

Būklė: naudotas, Gamybos metai: 2018, Startech CN MAIN FEATURES FLEXIBLE AND INDIVIDUALLY CONFIGURED PRODUCTION COMBINED WITH SPEED AND PRECISION DRILLING FROM ABOVE WITH REFERENCE TO THE TOP SIDE OF THE PANEL ALLOWS FOR ABSOLUTE PRECISE PROCESSING NUMERICAL CONTROL WITH 7" COLOUR SCREEN: SIMPLE AND INTUITIVE TECHNICAL DATA Startech CN AXES Max. workpiece dimensions X-Y-Z mm 3050 x 800 x 50 Min. workpiece dimensions X-Y-Z mm 300 x 90 x 10 Working area drilling/grooving mm 0 x 800 / 0 x 800 Stroke of X-axis mm 750 Max. traversing speed X-Y axes m/min 25 DRILLING UNIT Vertical spindles number 7 (4X-4Y, one shared) Horizontal spindles (along Y-axis) number 2 (1+1) Horizontal spindles (along X-axis) number 1 Fixed groove saw (direction) X Diameter of groove saw mm 100 Max. thickness of groove saw mm 5 Motor power kW (HP) 1.5 (2) Spindle speed rpm 3350 Groove saw speed rpm 4300 INSTALLATION Power supply V (Hz) 380 / 400 (50 / 60) Installed power KVA 4.5 Compressed air requirement bar 6 Compressed air consumption Nl/cycle 90 Extraction requirement m³/h 1200 Extraction air speed m/sec 20 Extraction connection diameter mm 120 GENERAL FEATURES Universal CNC drilling machine with a working table with fixed gantry and moving workpiece for performing the following operations: - Vertical drilling on the panel surface - Horizontal drilling on all four workpiece sides - Grooving with an integrated groove saw in the 'X' direction Self-supporting structure Machine base made of steel tubular construction to provide a large base for accommodating the working table. The structure rests on 3 self-levelling feet. The electrical control cabinet is integrated into the machine base. Central Bakelite support table 'Easy Motion': - an MDF sector for through drilling, automatically retractable for horizontal drilling - an infeed roller to facilitate panel loading - a rear roller track to ease panel sliding - left and right stops - a central alignment device with manual adjustment The left and right stops must be used to drill horizontally in the 'X' direction on the two opposite panel sides. Panel positioning along the X-axis is via vacuum suction cups. Aggregates carrier This is a gantry structure made from steel tube. The main working unit is installed on the gantry. F10L drilling unit includes: - 7 independent vertical spindles - drill shank D10 mm - spindle pitch 32 mm - 2 horizontal drilling heads, 1 in X direction with one drill bit, 1 double drilling head in Y direction (1 + 1, drill shank D10 mm) - Speed 3350 rpm - 1 integrated sawing unit in X (max. diameter 100 mm) - Saw blade speed 4300 rpm - Motor power 1.5 kW - pneumatic vertical travel per spindle 70 mm - pneumatic horizontal travel of the drilling unit Workpiece positioning and drive of the working unit A CNC-controlled vacuum cup clamps and positions the workpiece sequentially under the working unit during processing. Movement along the X and Y axes is on THK guides with motion transmission via reinforced toothed racks. Z-axis movement is pneumatic on ball-bushing guides with stop position adjustable via the unit's positioning. Working unit positioning uses advanced drive and technology. -CONTROL The control software is specifically designed for use Fgsdpfx Aovwbp Asaiof

Būklė: naujas, Gamybos metai: 2025, Gannomat Concept 70 Eco Lamella Carcase Clamp with Rapid Traverse Technical Data: Lamella carcase press from our showroom; Working range: width from 150 to 2,500 mm, height from 150 to 1,400 mm; depth 700 mm; - Upper lamella pressure beam with 6 elements, side lamella pressure beam with 5 elements - Lamella pressure beams with proven tolerance compensation for tightly pressed carcase joints - Counterpressure surfaces are 40 mm thick, coated continuous support plates - The pressing force of the pressure beams is continuously electronically controlled via 2 potentiometers and set by frequency inverter, thus the torque transmission is completely wear-free. Fgedoiidm Nspfx Aaiof - Pressing force for horizontal pressure beams: min. 500 daN (kg) up to stepless max. 2,200 daN (kg) - Pressing force for vertical pressure beams: min. 300 daN (kg) up to stepless max. 2,200 daN (kg) - Including option: Rapid traverse speed for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors integrated into the beams; pressing speeds of 5/10/25 mm/sec and rapid traverse speed of 50 mm/sec; sensors can be deactivated for clamping special parts. - Inch mode for precise positioning of both pressure beams, e.g. for low pressing forces, drawers, and carcases at 45 degrees. Simple operation via 6 separate push-buttons, freely adjustable pressing time preselection with automatic opening, feeding height 300 mm. The machine is on display in our showroom and available for immediate delivery. Location: ex stock 54634 Bitburg - immediately available -