Kamerinis džiovintuvas

Brunner Hildebrand BTV 5

Būklė: naudotas, No. 3213 Thermal Treatment Plant / Vacuum Dryer WTT Used, Year of Manufacture: 2017 Thermal treatment plant / thermo-chamber for wood modification The WTT thermo-chamber is a facility for the thermal modification of wood. It enables efficient processing of 2 to 3 batches per day, depending on the thickness and type of wood. The plant features a powerful energy and heat transfer system and operates with a gas- or oil-fired boiler unit using thermal oil as the heat transfer medium. Technical details: Capacity: 5,950 - 9,900 m³ timber per year (based on 330 working days) Effective volume: 9 m³ (at 50 mm wood thickness) Stack dimensions: 10,500 x 1,300 x 1,100 mm (L x W x H) Minimum board thickness: 10 mm Power connection: 3 x 400 V, 50 Hz + neutral + earth, 63 A Specific power consumption: 15.9 kW/m³ Maximum heating output: 2 MW (230 °C - 250 °C thermal oil) Heat consumption: 120 kWh/m³ wood Autoclave length: 11,000 mm Autoclave diameter: 1,800 mm Autoclave material: 10 mm stainless steel duplex EN 4462 Door opens hydraulically, with 1.5 kW drive Operating pressure: 0.1 to 15 bar (absolute) Operating temperature: 0 °C to 220 °C 200 mm glass wool insulation, clad with 1 mm galvanized steel sheet Main components: 1. Autoclave for thermal treatment 2. Vacuum system to evacuate the autoclave before heating 3. Energy center with a 2 MW oil burner 4. 4 MW cooling system with dry coolers 5. Nitrogen generator 6. Gas cooling system Heating and cooling system: Heat exchangers: 8 units (4 per side) Material: Stainless steel tubes (seawater resistant) Total surface area: 165 m² Cooling water consumption: 1,000 l/batch (not contaminated, heated only) Control and operation: Control system: WTT ExoT (fully automatic) Displays: 22" color monitor with IBM computer and printer Sensors: 4 x PT100 temperature sensors 2 x mechanical thermometers 1 x vacuum/pressure transmitter 1 x mechanical vacuum/pressure gauge Special equipment: Hydraulic rail bridge for easy trolley movement Automatic trolley extraction with winch (1.5 kW) 2 MW thermal oil boiler (heating) Heating oil tank (4,000 l) with measuring system Insulated 20-foot steel container for heating module Stainless steel safety chimney (300 mm diameter, 6,000 mm length) Functional description: 1. Loading the autoclave with wood 2. Creating pre-vacuum 3. Filling with gas 4. Heating 5. Modification 6. Cooling 7. Pressure equalisation 8. Creating post-vacuum / drying 9. Pressure equalisation 10. Unloading Certified according to EC Pressure Equipment Directive (PED) 97/23/EC Design according to EN 13445 Sale on behalf of a customer, ex location near 5020 Salzburg (Austria), without dismantling, transport, or installation Dismantling, loading, and transport by us available on request Errors in description and price reserved To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Lasdpfx Akjv Si Szehoc Sale as-is Technical information, condition description, year of manufacture and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded; it applies: "purchased as inspected" Pictures and videos serve as samples and do not reflect the actual scope of delivery Payment terms: Prices plus statutory VAT, payment before collection or shipping Delivery terms: ex location

Būklė: naudotas, Gamybos metai: 1995, Funkcionalumas: visiškai funkcionalus, bendras ilgis: 36 000 mm, Flat-bed press dryer, working width 4,600 mm, length 22,000 mm (of which 10,000 mm with press rollers), separate pressing and cooling section, heating medium: hot water, semi-automatic loading system, model BFT46 with lifting platform, max. veneer length: 4,600 mm, roller width: 600 mm, total length: 36,000 mm, 11 fans, PLC control system renewed in 2017. Laedpev Hygfofx Akhoc A second flat-bed press dryer of similar design is also available.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2019, Funkcionalumas: visiškai funkcionalus, The JJZ-CP type press is designed for the production of plywood, doors, and MDF boards. Loading and unloading of laminated components from the press is performed automatically via powered rollers. The press can be integrated with glue applicators. Technical data: - Maximum pressure: 500T (adjustable) - Maximum feed height: 1300 mm - Maximum feed dimensions: 1300 x 2500 mm - Press dimensions: 3600 x 1370 x 4500 mm - Press installed approximately 500 mm below floor level Lajdpfx Akjtutwvshsc - Infeed table: 2000 x 1960 mm - Outfeed table: 2350 x 2500 mm - Maximum power: 13.2 kW - CE mark

Gamybos metai: 1998, būklė: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, Vanicek drying chamber with bolster wagon with entrance and exit gate (double-leaf doors) with control unit and electrical switch cabinet Lsdpswxdqkjfx Akhjac Dimensions: internal length 13.05 m, width 4.00 m, height 2.80 m Fan: VMR 71-05-4, electric motor 1.1 kW/400V Dehumidifier Ø 50 mm, with actuator Dehumidifier Ø 40 mm, with actuator UGL sensors, humidification, heating valve (local supply) Switchgear, heating coil, fan frame Stacking dimensions: 1x12.50 m, 2x1.20 m, 2x1.00 m

Gamybos metai: 2009, būklė: geras (naudotas), • Fully automatic • Max. package height (mm): 650 • Min. package height (mm): 15 • Max. package width (mm): 1250 • Min. package length (mm): 300 • Infeed conveyor (mm): approx. 2,000 x 1,300 x 900 • Outfeed conveyor (mm): approx. 2,000 x 1,300 x 900 Laodpspu Anmofx Akhjc • Outfeed table • Overall dimensions (mm): approx. 8,000 x 3,000 x 2,200 • Total connected load (kW): approx. 5

Gamybos metai: 1999, būklė: paruoštas naudoti (naudotas), Parduodama Cremona faneravimo linija. 1) Vertikalus pjūklas Cremona, pagaminimo metai: 1999, darbo plotis: 5400 mm. Įrengta kėlimo įranga. 2) Džiovintuvas Cremona, pagaminimo metai: 1999, valdymas: Siemens PLC, valdymo metai: 2019, darbo plotis: 5400 mm, vakuuminio padavimo plotis: 5400 mm, sekcijų skaičius: 6, temperatūros zonos: 2, aušinimo sekcija: 1. Gamybinis našumas: apie 70 lakštų/min. Yra dokumentacija. Galima vietinė apžiūra. Ljdew I E Dvjpfx Akhoac

Būklė: geras (naudotas), Obel Pedersen high-frequency through-feed belt press, Opel-Pedersen press type 2412. Pressing length 2,500 mm, width 600 mm. Comes with gluing station, feed table, HF generator T20 V, and water cooling. The system has been dismantled. Ledpfedybr Rox Akhsac

Gamybos metai: 1995, būklė: geras (naudotas), Kuper Veneer Zig-Zag Splicing Machine, Model FW/1200-E Year of manufacture: 1995 S/N 3508 3179 Special features of the KUPER FW 1200 E: - High feed speed of 60 m/min - Electronically infinitely adjustable zig-zag width of the glue thread cutting unit Maximum veneer thickness: 3.0 mm Minimum veneer thickness: 0.3 mm Glue thread with hot air heating Compressed air generation Disc for transporting veneer over the veneer table Foot pedal control Feed speed: 35–60 m/min Laodpohbp Ifefx Akhec Voltage: 400 V, 50 Hz Total power: 1.35 kW Working height: 915 mm Weight approx.: 440 kg Dimensions: 2.12 m x 0.73 m x 1.55 m

Būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, Vakuuminė džiovinimo kamera iš ISVE. ISVE valdymas 2024 m. atnaujintas, įranga patikrinta. Lodpfxexgdrbo Akheac

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2006, Funkcionalumas: visiškai funkcionalus, Log House Milling Machine BL100A, fully overhauled with factory warranty Lodpsxxhwljfx Akhsac For log thickness up to 140mm, construction height up to 200mm, and processing length up to 9.0m • Infeed table (timing belt cross conveyor) and entry table for timber length 9m • Log house milling machine BL100A – four-spindle milling unit with hydro-pneumatic feed, 2x4kW / 2x3kW for cross-sections approx. 140x220mm • HM reversible insert tools included for wall thickness approx. 40–100mm • End groove milling unit 3.0kW with cutter B = 21–40mm • Drilling device with drill guide and drill bit D = 20mm • Integrated under-table cross-cut saw 4.0kW, saw blade D = 500mm • Pneumatic workpiece clamping with horizontal clamping jaws • Outfeed table 9m with push-off device and material storage table 6x1.5m • Servo slider positioning system with IPC control and IITO Control Software • Label printer for component identification, laser printer for printing production lists • Excellent condition, factory-refurbished & general serviced, with parts warranty, in ready-to-operate condition • Price & delivery time upon request. Subject to prior sale and all rights reserved