Nepertraukiamo gręžimo staklės

BIESSE TECHNO FDT

Gamybos metai: 2004, Sąlyga: labai geros būklės (naudotas), I am selling a throughfeed drilling machine BIESSE TECHNO FDT, year of manufacture 2004. Working area: X: 215 - 32,000 mm Y: max. 672 mm (horizontal spindle 24 units, 32 mm pitch) Z: Workpiece height: 9 - 65 mm Min. X distance between vertical heads: 96 mm Configuration: 4+4 motors from below 1 routing motor with pneumatic on/off stroke from below 1+1 side motors, 24 spindles / 32 mm pitch 0 motors from rear 4+4 motors from above Cjdpfxei U Apmo Admjaa 4 material pressure rollers from above Very good condition. Available immediately. Another BIESSE TECHNO FDT with different configuration available in a line. Price upon request.

Sąlyga: labai geros būklės (naudotas), PC control, type NC 400 No. 2 motorized through-feed conveyor belts No. 2 horizontal drilling supports No. 2 drilling units for each horizontal drilling support Spindles per horizontal drilling unit (qty): 11 Max. working width (mm): 3200 Min. working width (mm): 205 (approx.) No. 5 lower vertical drilling supports No. 2 drilling units for each lower vertical drilling support No. 2 upper vertical drilling supports No. 2 spindles for each drilling unit of the upper drilling support No. 4 upper vertical workpiece clamps Caodpjidqd Tofx Admsa Chip conveyor belt Digital position display (axis) Total connected load (kW): 59.1 The CNC control manages the movement (X-axis) of the horizontal drilling supports The CNC control manages the movement (Y-axis) of the stops The CNC controls the movement (X-axis) of the conveyor belts

Sąlyga: labai geros būklės (naudotas), PC control type NC 400 No. 2 motorized through-feed conveyor belts No. 2 horizontal drilling supports No. 2 drilling units for each horizontal drilling support Spindles per horizontal drilling unit (qty.) 11 Max. working width (mm): 3200 Min. working width (mm): approx. 205 No. 6 lower vertical drilling supports No. 2 drilling units for each lower vertical drilling support No. 3 upper vertical drilling supports No. 2 spindles for each drilling unit of the upper drilling supports No. 5 upper vertical workpiece clamps Chip conveyor belt Csdpfxeidqf Rs Admoaa Digital display of positional data (axis) Total connected load (kW): 59.1 The CNC control operates the movement (X-axis) of the horizontal drilling supports The CNC control operates the movement (Y-axis) of the stops The CNC controls the movement (X-axis) of the transport belts

Sąlyga: labai geros būklės (naudotas), Electronic Programmer NC 400 Feed-through motorized conveyor belts (qty.) 2 Horizontal drilling units (qty.) 2 Drilling heads per horizontal drilling unit (qty.) 2 Spindles per horizontal drilling head (qty.) 11 Caedpfx Aelwqrtedmja Max. working width (mm) 3200 - Min. working width (mm) 205 (approx.) Lower vertical drilling units (qty.) 6 Drilling heads per lower vertical drilling unit (qty.) 2 Upper vertical workpiece clamps (qty.) 4 Continuous chip extraction screws (qty.) 2 Digital position readout (axis) Total connected load (kW) 27.7 The CNC control operates the movement (X-axis) of the horizontal drilling units. The CNC control operates the movement (Y-axis) of the stops. The CNC controls the movement (Z-axis) of all vertical drilling units.

Sąlyga: visiškai atnaujintas (naudotas), AUTOMATIC COMPLETE DRILLING LINE, max. working width 3200 mm, equipped with fast automatic handling system. Comprising the following machines: Cjdpfx Adsdfgg Iomeaa A) LOADING STATION “RBO” Winner C 3200 with dual pick-up and central motorized roller table. Includes 2 floor-mounted motorized roller tracks for panel stack infeed to the loader. B) ROLLER CONVEYOR (connecting roller table with 90° transfer belts) “RBO” Transfer TA 90° C) 1st AUTOMATIC DRILLING MACHINE “BIESSE” Model Techno FDT with 2 horizontal drilling units + 7 lower vertical drilling units D) 2nd AUTOMATIC DRILLING MACHINE “BIESSE” Model Techno FDT with 2 horizontal drilling units + 7 lower vertical drilling units E) ROLLER CONVEYOR (connecting roller table with 90° transfer belts) “RBO” Transfer TA 90° G) UNLOADING STATION “RBO” Winner SC 3200 with dual pick-up, double stacking station, and central motorized roller table. Includes 2 floor-mounted motorized roller tracks for outfeed of panel stacks from the unloader.

Sąlyga: labai geros būklės (naudotas), CNC-controlled (automatic) through-feed drilling line. Also suitable for NARROW PARTS, minimum width 100 mm W05024F) AUTOMATIC THROUGH-FEED DRILLING MACHINE "BIESSE" Techno FDT, with CNC - No. 2 horizontal drilling units (each with 2 drilling heads, each with 1.5 HP and 11 drilling spindles); - No. 6 lower drilling units (each with 2 drilling heads, each with 2.3 HP and various drilling heads); - No. 4 upper drilling units (each with 2 drilling heads, each with 2.3 HP and various drilling heads); - No. 6 upper vertical workpiece clamps + No. 2 continuous screws for chip extraction CNC control unit - PC DESK TOP (Module Editor) - software Tooling System W05024G) AUTOMATIC THROUGH-FEED DRILLING MACHINE "BIESSE" Techno FDT, with CNC - No. 2 horizontal drilling units (each with 2 drilling heads, each with 1.5 HP and 11 drilling spindles); - No. 6 lower drilling units (each with 2 drilling heads, each with 2.3 HP and various drilling heads); - No. 3 upper drilling units (each with drilling heads of 2.3 HP and various drilling heads); - No. 6 upper vertical workpiece clamps - No. 2 continuous screws for chip extraction Csdpfxsu Tp Slo Admjaa 2nd drilling machine connected to the CNC of the 1st machine.

Sąlyga: labai geros būklės (naudotas), CNC-controlled (automatic) throughfeed drilling line, comprising: W05022F) AUTOMATIC THROUGHFEED DRILLING MACHINE "BIESSE" Techno FDT with CNC - No. 2 horizontal drilling supports (each with 2 drilling heads, each with 1.8 kW and 11 drilling spindles each); Cjdpfjt Ig A Ssx Admjaa - No. 6 lower drilling supports (each with 2 drilling heads, each with 1.8 kW and various drilling heads); - No. 3 upper drilling supports (each with 2 drilling heads, each with 1.8 kW and various drilling heads); - No. 5 upper vertical workpiece clamps + No. 2 continuous screws for chip removal CNC control: NC 500 (software: Tooling System + Woodmaster) W05022G) AUTOMATIC THROUGHFEED DRILLING MACHINE "BIESSE" Techno FDT with CNC - No. 2 horizontal drilling supports (each with 2 drilling heads, each with 1.8 kW and 11 drilling spindles each); - No. 6 lower drilling supports (each with 2 drilling heads, each with 1.8 kW and various drilling heads); - No. 3 upper drilling supports (each with drilling heads of 1.8 kW and various drilling heads); - No. 5 upper vertical workpiece clamps - No. 2 continuous screws for chip removal 2nd drilling machine is connected to the NC of the 1st machine.

Sąlyga: labai geros būklės (naudotas), CNC-controlled (automatic) drilling and dowel insertion line, consisting of: VZ0250A) FEEDING STATION "RBO" Tornado C 1300, with powered roller conveyor VZ0250) AUTOMATIC DRILLING MACHINE "BIESSE" Techno FDT, with CNC - 2 continuous powered belts, feed speed up to 75 m/min - 2 horizontal drilling units (each with 2 drill heads, 1.8 kW each, with 22 drilling spindles each) - 4 lower drilling units (each with 2 split and reversible drill heads, 1.8 kW each, with various drill heads) - 3 upper drilling units (each with 2 split and reversible drill heads, 1.8 kW each, with various drill heads) - 3 upper vertical workpiece clamps - 2 (endless) screw conveyors for chip removal CNC control NC 500 for both machines Cajdpfxjd Nviqj Admsa VZ0250C) AUTOMATIC DRILLING AND DOWEL INSERTION MACHINE "BIESSE" Techno SDT, with CNC - 2 continuous powered belts, feed speed up to 75 m/min - 2 horizontal drilling units (each with 6 horizontal units – gluing and dowel inserting tools) - 2 lower drilling units (each with 2 split and reversible drill heads, 1.8 kW each, with various drill heads) - 2 upper vertical workpiece clamps - 2 (endless) screw conveyors for chip removal VZ0250D) BRUSHING MACHINE "PIZZIGALLI" Model GP 11 VZ0250E) DESTACKING STATION "RBO" Tornado SC/FE 1300, with powered roller conveyor

Sąlyga: naudotas, Complete factory for furniture manufacturing, consisting of: SZ0M23) Angle panel saw "GIBEN" Type 17 (5700x2700 mm) with "SIRIO" stacking system SZ0M25) Panel saw "GIBEN" Model GammaDue (3800x2200 mm) SZ0M26) Multi-blade panel saw "GABBIANI" (finished panels 4250x2120 mm) SZ0M27) Laminating line (roller press) "BARBERAN" for melamine papers (paper glue application) SZ0M29) Press line "COLOMBO REMO" (1400x9600 mm) for paper/veneer/laminated panels SZ0M30) Press line "FRIZ" (1400x6200 mm) for paper/veneer/laminated panels SZ0M41) Double-sided sizing and edge banding line "IMA" Combima with high-speed "RBO-BIESSE" automatic handling system Cajdpfxecr U Ure Admea SZ0M42) Double-sided sizing and edge banding line "IMA" Combima Softforming with a second double-sided sizing and edge banding machine "STEFANI" and handling system "TOMASSINI" SZ0M39-40) Single-sided edge banding line for narrow workpieces "HOMAG" Model KAL 310 with splitter "NARDELLO" Model Elegance SZ0M35-36) Boring machine "BIESSE" Techno Logic with infeed and stacking system "TOMASSINI" SZ0M45) CNC-controlled drilling and dowel inserting line "BIESSE" Techno FDT with high-speed automatic handling system "RBO-BIESSE" SZ0M37) CNC machining center "MORBIDELLI" Model Author 600 KL SZ0M56) Roll slitting and winding machines "CEFLA-DUSPOHL" Type RSW 2200 T SZ0M01) Cutting line (circular saw) and wood strip cutting line "OGAM+SALVADOR" SZ0M07) Cutting line (circular saw) and wood strip stacking line "SALVADOR + SACOT" SZ0M08) Cutting line (circular saw) and wood strip stacking line "SALVADOR + CMA" SZ0M11-17) Preparation line for honeycomb panels SZ0M18) No. 6 multi-daylight press "COLOMBO REMO" (dimensions ?? x ?? mm) SZ0M21) Sizing and calibrating line for honeycomb panels "GABBIANI + CELASCHI + ELMAG + COSTA LEVIGATRICI" Numerous other machines (VITAP drilling machine, circular saws, glue application machines, etc.), dust extraction system, roller conveyors, shelving (wall racks), forklifts, pallet trucks, and more. The machines are still installed at the user’s site and can be inspected by appointment.

Sąlyga: labai geros būklės (naudotas), PC control type NC 400 (software) Codpfxsgk T Tto Admjaa Through-feed motorized conveyor belts (qty.) 2 Horizontal drilling supports (qty.) 2 Drilling units per horizontal drilling support (qty.) 2 Spindles per horizontal drilling unit (qty.) 11 Max. working width (mm) 3200 - Min. working width (mm) 205 (approx.) Lower vertical drilling supports (qty.) 6 Drilling units per lower vertical drilling support (qty.) 2 Upper vertical drilling supports (qty.) 4 Spindles per drilling unit of the upper drilling supports (qty.) 2 Upper vertical workpiece clamps (qty.) 5 Continuous screws for chip removal (qty.) 2 Digital display of position data (axes) Total connected load (kW) 48 The CNC control system manages the movement (X-axis) of the horizontal drilling supports. The CNC control system manages the movement (Y-axis) of the stops.