Edgebander

BIESSE Akron 1440A + Automatic Return Table

Būklė: labai geros būklės (naudotas), Gamybos metai: 2019, Funkcionalumas: visiškai funkcionalus, veikimo valandos: 5 383 h, HOMAG DRILLTEQ V-200 yra kompaktiškas ir itin efektyvus vertikalus CNC apdirbimo centras, skirtas tiksliems gręžimo, įpjovimo ir frezavimo darbams baldų ir spintų gamyboje. Dėl vertikalaus apdirbimo staklėms reikia minimalios grindų vietos, o jos užtikrina didelį lankstumą ir produktyvumą. Puikiai tinka tiek pavieniams, tiek serijiniams užsakymams gaminti. Dedjym Ny Sjpfx Af Ajcg Įrenginys yra labai geros techninės būklės, galima apžiūrėti veikiantį.

Būklė: naudotas, mašinos/transporto priemonės numeris: 007687, Type of attached edge: thin edge, thick edge, solid wood Glue application system: EVA, hot air Jointing milling: yes Multi-functional unit: yes Dcedowuz Npspfx Af Ajg Maximum feed speed: 18 m/min Maximum panel thickness: 60 mm Working units: 7 pcs

Būklė: naudotas, Painting line consisting of: Pos.1 Belt Conveyor Infeed - Manufacturer: Venjakob - Working width: 1,300 mm - Length: 3,000 mm - Feed rate adjustable via handwheel ~ 2.5–7.5 m/min - Voltage, Frequency: 400 V / 50 Hz - Colour: RAL 7035 Pos.2 Cefla Dust Removal Machine - Manufacturer: Sorbini - Model: VS/32-E - Year of manufacture: 1998 - Working width: 1,300 mm - Working height: 900 mm ± 20 mm - Operator side: right - Roller transport - 2 upper air blast ducts - 1 lower air blast duct - Dust removal brush - With ionizing bar above - With ionizing bar below - With own drive - With independent control system - Length: approx. 910 mm - Width: approx. 2,600 mm - Weight: 1,260 kg Dcsdov I Akvjpfx Af Aeg - Extraction port diameter: 180 mm + 120 mm - Total connected load: 7.6 kW - Voltage, Frequency: 400 V / 50 Hz Pos.3 Venjakob VEN SPRAY Perfect Automatic Spray Machine - Manufacturer: Venjakob - Model: VEN SPRAY PERFECT - Year of manufacture: 2013 - Working width: 1,300 mm - Working height: 940 mm ± 20 mm - Operator side: left - IR pre-heating, number of emitters: 2 pcs. - Dual spray gun drive - Dry extraction - Extraction port diameter: 600 mm - Exhaust air capacity: 10,000 m³/h - Belt conveyor system - Continuously variable feed rate ~ 4–10 m/min - Belt cleaning system - Paint recovery via V-belt system - Gun control EPS-CNC 7000 - Color management system for 3+1 pump units - Number of installed Airless spray guns: 4 pcs. - Quick-change system for spray units - Remote maintenance system - Dust protection hood at the machine outlet - Exhaust air recirculation system - Extraction fan air control - Machine suitable for water-based paints - Machine suitable for solvent-based paints - Length: 5,509 mm - Width: 4,500 mm + 2,400 mm - Height: 3,380 mm + 510 mm - Total connected load: ~20–26 kW - Voltage, Frequency: 400 V / 50 Hz - Colour: RAL 7035 - Kremlin AVX AirMix spray guns - Small batch container - Spray gun boom system for quick removal of 4 AirMix spray guns from the spray cabin, incl. quick couplings for pneumatic and material hoses. Pos.4 Venjakob Belt Conveyor - Manufacturer: Venjakob - Working width: 1,300 mm - Length: 2,000 mm - Feed rate adjustable via handwheel ~2.5–7.5 m/min - Voltage, Frequency: 400 V / 50 Hz - Colour: RAL 7035 Pos.5 Cefla Vertical Dryer - Manufacturer: Cefla - Model: VN 2000/5500/190.5/30 - Year of manufacture: 2003 - Working width: 1,300 mm - Number of pallets: 30 pcs. - Pallet length: 5,600 mm - Usable pallet length: 5,300 mm - Load capacity per pallet: 300 kg - Max. part height: ~110 mm - Clear height between pallets: 120 mm - Distance: center of pallet to center of pallet: 3,658 mm - Max. part length: ~5,200 mm - Number of controllable temperature zones: 2 pcs. - Fresh air capacity: 6,000 m³/h - Exhaust air capacity: 6,000 m³/h - Max. heating capacity: 175 kW - Max. drying temperature: ~55–60 °C - With heat exchanger, hot water - Without hot water control valves - U-shaped pass-through configuration - Infeed side right - Feed speed via frequency inverter ~2–20 m/min - Suitable for water-based paints - Suitable for solvent-based paints - Length: 7,820 mm - Width: 6,130 mm - Height: 3,905 mm - Total connected load: ~23 kW - Voltage, Frequency: 400 V / 50 Hz - Voltage fluctuations max. ±5% - Without control valves and water pumps Pos.6 Belt Conveyor Infeed - Manufacturer: Cefla - Working width: 1,300 mm - Length: 2,000 mm - Feed rate adjustable via handwheel ~2.5–7.5 m/min - Voltage, Frequency: 400 V / 50 Hz - Colour: RAL 7035

Būklė: naudotas, Gamybos metai: 2011, Base Machine M800 X5 TV 1 WORKING AREA X: 5,020mm Y: 1,830mm Z: 675mm Clearance Height: 300mm (starting from 50mm suction cup height) MACHINE STRUCTURE The base structure is a monolithic design made from thick-walled steel. It is reinforced with welded-in parts across the entire machine bed, providing extreme stability. The table design, with a large base, is the key to ensuring lasting precision and stability. The machine layout allows users to maintain an optimal workflow while requiring minimal floor space. The movable gantry beam is built from a solid monoblock. It is positioned along the X-axis on prismatic, ground guides using recirculating ball carriages. On this mobile unit carrier, the working unit is also mounted on prismatic, ground guides and recirculating ball carriages. AXIS MOVEMENT All axis movements take place on prism linear guides with large cross-sections and recirculating ball shoes with large contact areas, ensuring optimal sliding even at maximum speeds and accelerations. Precise and rapid positioning of the movable gantry (X-axis) is achieved via helical rack and pinion. Large-diameter recirculating ball screws guarantee accurate positioning of the working unit along the movable gantry (Y and Z axes). Perfect mechanical dynamics and maximum positioning accuracy are controlled by high-quality actuators and brushless motors. Maximum axis speeds: · X-axis = 90 m/min · Y-axis = 90 m/min · Z-axis = 30 m/min Safety Device with Bumper and Light Curtain 1 Bumpers with sensors are installed around the movable stand, and a light curtain system is mounted in front of the machine. If the operator enters the active zone, the X-axis speed is reduced to a lower value of 25 m/min without stopping the machine. This system allows workpieces to be loaded during pendulum operation without the access restrictions of floor mat systems. It prevents unwanted interruptions of the machining cycle and gives greater freedom of movement around the worktable. CE Certification for the Safety System 1 Safety protection fence 1 Protective fencing at the sides and rear Automatic Central Lubrication controlled by CNC 1 Lubrication of the X, Y, and Z axes is managed by CNC control at regular intervals, eliminating manual intervention at the machine. Central Extraction Connection 1 All individual extraction ports of the processing units are combined into a central extraction nozzle. Various slide gates inside the nozzle are controlled by the NC unit, reducing the required extraction air flow. Chip Conveyor 1 Maxi - 5-axis Electrospindle 11 kW HSK-63 "Prisma K 1" 5-axis electrospindle with 11 kW output at 20,000 rpm in S1 (100% duty cycle) Speed: max. 20,000 rpm Left/right rotation Liquid cooling Tool interface: HSK 63F 18 kW Inverter provides stepless, even power delivery Max. rotation: B-axis = 200° (±100°) C-axis = 650° Dedpfexy Tmnox Af Aocg Thanks to non-orthogonal axes, it is possible to perform complex horizontal positioning within a small working area. This enables the machining of complex geometries without collision risk.

Būklė: naudotas, Number of sanding units: 4 pcs. Sanding width: 190 mm Max. sanding height: 180 mm Control: yes Weight: 3,300 kg Dimensions (L/W/H): 2,600 x 920 x 1,890 mm Extraction port diameter: 2x180, 2x120 mm Double-sided sanding machine Löwer DSM 2004 ----- 4-belt sanding machine + disc unit from top/bottom Manufacturer's description: ----- Double-sided four-belt single-piece wood sanding machine for sanding solid wood, such as window profiles, etc. High-stability premium version with innovative features. Designed for high continuous load even with greater material removal. - Sequentially arranged sanding units for pre-sanding, fine sanding, and finishing, each from top and bottom 1st sanding unit: heavy steel roller 2nd sanding unit: rubber-coated roller and shoe 3rd finishing unit: fiber brush (see optional equipment below) - Directly driven sanding rollers for slip-free power transmission - Maintenance-free and wear-free CERMET-coated sanding shoes with excellent thermal conductivity and absolute dimensional stability - External cooling of sanding zones for cooler sanding and longer belt life - Forced pneumatic belt oscillation - Effective dust extraction directly at the sanding rollers - Airborne dust extraction at tension rollers - Integrated brushing and finishing unit with large dust extraction - Motorized sanding thickness adjustment via precision lead screws and large linear ball bearing sets on hardened and ground precision shafts with dust and dirt protection - Removal adjustment below via precision lead screw with scale ring (resolution 0.1mm) - Pneumatic belt tensioning with constant tension pressure - Quick belt change with pneumatic belt release in seconds - Adjustable sanding belt tracking during belt changes Dcedpfx Aevu Hgbjf Aeg - Electropneumatic compressed air monitoring - Infeed protection via contact roller for oversized workpieces - Workpiece transport via calibrated, slip and adhesive-resistant conveyor belts over heavy cast iron tables with finely planed surfaces and spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for smooth and uniform workpiece transport - Feed gear motor with stepless speed control 4–20 m/min - All motors electrically protected - Ergonomically arranged controls - Digital thickness display (resolution 0.1mm) with modern magnetic tape system Technical Data: - Belt speed: 22 m/s - Belt length: 1,800mm - Belt width: 200mm - Working width: 190mm - Sanding thickness: 2–180mm - Four braking motors for drive: 5.5 kW - Feed motor: 1.5 kW - Feed speed: 4–20 m/min - Automatic height adjustment: 0.37 kW - Two brush units with fiber brushes D 120 x 200mm at 0.37 kW each - Extraction ports: 2 x 180mm, 2 x 120mm - Extraction air speed: 20 m/s - Pneumatic connection: 6 bar - Working height: 870mm - Length (with Softdisc 2,740mm): 2,600mm - Length with control panel (with Softdisc 3,035mm): 2,985mm - Width: 880mm - Height: 1,910mm - Approx. weight: 3,300 kg - Operating voltage: 400 V, 50 Hz, 3P - CE compliant Equipped with the following options: - Sanding belt air blow-off 4-belt via nozzles directly at the radii ...

Būklė: labai geros būklės (naudotas), Four-Side Planer Weinig Unimat 23 EL Working width: 230 mm Working height: 160 mm Spindle arrangement: Bottom – 5.5 kW Right – 4 kW Left – 5.5 kW Right – 4 kW Top – 11 kW Bottom – 5.5 kW Top – 7.5 kW Bottom – 7.5 kW Dcedperb An Uofx Af Aeg Feed speed adjustable via variator: 6–36 m/min Feed driven by cardan shaft Table with powered rollers Pneumatic pressure units CE certificate Year of manufacture: 2003

Būklė: labai geros būklės (naudotas), ONE-SIDED EDGE BANDING MACHINE (LEFT) Edge thickness for rolls (min/max) mm 0.4 / 3 Djdpfx Afjxlqnte Ajcg Edge thickness for solid strips/slats (min/max) mm 0.4 / 8 (12)* Panel thickness (min/max) mm 8 / 60 Control system "StarTouch" + "Touch 7" Feed speed m/min 12-18 Top pressure driven by V-belt (C.N.) Sprayer unit (for liquid anti-adhesive) AAR Adjustable fence, CNC-controlled "EASY SIZE PLUS" Jointing cutter unit 2 x kW Infrared heating for workpiece edge Gluing unit (P.U.R. glue + premelter) "VC/800" - "VC/6" + "AirFusion AF15" Edge pressure zone (CNC-controlled) Edge magazine for rolls - 1 End trimming unit K/SEL Premilling unit RS/K Milling unit RI / 800 (3 positions) Multi-function unit (radius/profile milling) "4 EDGE" KIT Spraying units (for sliding liquid) Profile scraper unit RAS/1000 Flat scraper unit RCA / 2C Universal milling unit for grooving/rebating and profiling K-100 (1 x kW 1.8) 90° Hot air blower - edge finisher Return direction "SAG" Mod. SPINNER 47 / 63

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2021, X ašies eiga: 4 000 mm, Y ašies eiga: 1 670 mm, Z ašies eigos atstumas: 500 mm, ašių skaičius: 4, Šis 4 ašių CNC apdirbimo centras buvo pagamintas 2020 m. Jame įrengtas 12 kW frezavimo suklys, kurio sukimosi dažnio diapazonas yra 1000-24000 aps/min, o C ašies sukimosi kampas - 0-360°. Staklėse yra 12 stočių linijinis įrankių keitiklis ir visapusiška gręžimo galvutė su 16 suklių. Ji taip pat gali pasigirti patikima saugos sistema su šviesos barjeru. Apsvarstykite galimybę įsigyti šį "Felder Format 4 Profit H 200" CNC apdirbimo centrą. Susisiekite su mumis ir gaukite daugiau informacijos apie šias stakles. • Automatinis centrinis tepimas Dsdpfox D D Hmjx Af Aocg • Darbinis plotas: X 3300 mm / Y 1280 mm / Z 250 mm (atstumas nuo konsolės lygio priklauso nuo prispaudimo sistemos) • Valdymo terminalas kairėje mašinos pusėje • Rankinis terminalas su ašies greičio valdymu ir avariniu stabdymu • Programinė įranga: "Woodflash" (CNC plokštė, įrankių duomenų bazė, programų redaktorius) • Ruošinio atramos ir vakuuminių siurbtukų padėties nustatymo ekranas • Vakuuminė jungtis šablonų frezavimui (kairėje pusėje), jungties skersmuo 12 mm • Vakuuminis siurblys: Vakuuminis siurblys: 1x, bendra siurbimo galia 90 m³/h @ 50 Hz arba 108 m³/h @ 60 Hz • Frezavimo velenas: 12 kW (S6), HSK F63, 1000-24 000 aps/min, visa vardinė galia ~12 000 aps/min, aušinama oru; C ašis 0-360° • Įrankių keitimo įrenginys: 12 stočių linijinis kairėje staklių stendo pusėje, įskaitant agregatų paėmimo vietą; maks. įrankio skersmuo 250 mm; maks. įrankio ilgis 240 mm • Gręžimo galvutė DH 16 4H 2S: 12 vertikalių velenų (7X / 5Y); 4 horizontalūs velenai (2X / 2Y); išankstinė eiga 70 mm; gręžimo ilgis 70 mm; kotas Ø 10 mm • Griovelių pjūklai: 2 (vienas X, vienas Y); maksimalus ašmenų Ø 120 mm; maksimalus storis 5 mm; be perstojo keičiamas greitis iki 7500 aps/min. • Sauga: priekinė šviesos barjerų sistema

Būklė: naujas, Gamybos metai: 2026, No matter what job you need to cut, the A700 is the only saw you'll ever need. With the largest cutting capacity in its class and an extensive ±75º mitre angle range, the A700 is engineered for high-precision, high-angle mitre cuts—without limiting the profile sizes you need to process. This saw is ideal for bundle-cutting multiple aluminium profiles simultaneously, delivering exceptional accuracy. Enjoy high-speed aluminium processing with precise PLC-controlled movements. The pneumatically actuated safety guard opens and closes at the press of a button, granting full, unobstructed access to the saw table. An integrated safety switch disables operation whenever the guard is lifted, ensuring maximum workplace safety. Optional CNC-controlled saw mitre angle positioning is available, complete with intuitive touch-screen controls. • Ø700 mm TCT saw blade with 4 kW drive motor • AS / NZS 4024:2014 safety compliance, two-hand operation for cutting • Overhead safety guard with 900 mm safety tunnels on each side • Guard lifts pneumatically at the push of a button • Safety switch disables saw operation if guard is raised • 2× vertical clamps and optional 2× horizontal clamps with adjustable pressure settings • Mitre angle adjustment ±75°, positive stops at 0°, ±15°, ±22.5°, ±30°, ±45°, ±60°, ±75° • Spray-mist blade lubrication system • Air gun and LED interior workspace lighting • 2 × Ø100 mm chip extraction outlets • Optional 2.2 kW dust extraction unit • Optional automated mitre control system Ideal for: • Mass aluminium fabrication Dodpfomb U Tuox Af Aecg • Mitered aluminium structure production • Window and door manufacturing • Blinds, shades and furniture production • Engineered aluminium assemblies • Aluminium façade construction

Būklė: naudotas, mašinos/transporto priemonės numeris: 008127, Pozicija 1: Vienpusė briaunų klijavimo staklės BIESSE + FORMETAL-AKRON 1440 A Pozicija 2: Plokščių grąžinimo sistema BIESSE + FORMETAL-AKRON 1440 A Dcodpfx Ajw Tq Iwof Asg