Briaunų apklijavimo mašina

Biesse AKRON 1400

BIESSE Edgebanding Machine AKRON 1440-A
Automatic single-sided edgebanding machine for applying and processing straight edges using coil material (melamine, PVC, ABS, veneer) and strip material (solid wood, HPL, sliced veneers, etc.).
• NC control with touch display
• Automatic start of aggregate motors
• Direct selection for second pass
• Operating data acquisition
• Software-guided maintenance

TECHNICAL DATA
Workpiece thickness: 10–60 mm
Workpiece thickness with MFU aggregate (profile-dependent): 10–35/60 mm
Edge height: 14–64 mm
Edgebanding thickness (coil): 0.4–3 mm
Edgebanding thickness (strip)*: 0.4–10 (12) mm
Workpiece overhang: 25 mm
Minimum panel length: 140 mm
Minimum width (at 140 mm length): 85 mm
Minimum width (at 250 mm length): 50 mm
Feed speed: 12 m/min
Extraction*: 8x port Ø100 mm
Compressed air connection: 7 bar
Glue pot capacity: approx. 2 kg
*Depending on selected aggregates

- GLUING UNIT VC-511
Applies hot-melt adhesive to the workpiece, feeds the edge material onto the workpiece, automatically cuts coil material, and presses the edge precisely onto the workpiece, ensuring perfect positioning.
Nedpfjxzb Iiox Aghjwp

- END TRIMMING UNIT IN-801
For trimming the front and rear edge overhangs at 0° to 15° angles.

- 2-MOTOR MULTIFUNCTIONAL PROFILE MILLING UNIT AR02 E
For corner rounding and profile milling of synthetic material edges up to a maximum thickness of 3 mm.

- PRE-MILLING UNIT RT02
Pre-mills the workpiece before adhesive application. Two high-frequency motors, each 1.8 kW, 12,000 rpm.

- SCRAPING UNIT RB02
For post-processing thick PVC/ABS edges.

- FLAT SCRAPER RC02
Unit for removing excess glue at the joint between edge and panel. Equipped with tracing rollers and a flat knife with electronic engagement.

- BUFFING UNIT SZ02
For cleaning and polishing the workpiece edge using fabric buffing wheels. The unit adjusts automatically to the workpiece thickness.

- SPRAY SYSTEM FOR ANTI-ADHESIVE AGENT ADZ02
Precision application of anti-adhesive agent via injectors, numerically controlled.

- KIT PRO-GLUE
The PRO-GLUE kit includes:
• TEKNO-GLUE system for optimal adhesive application via:
- Controlled glue roller contact.
- Automatic retract in case of feed stop.
- Automatic ON/OFF of gluing section.
• REVERSE system for switching the glue roller between co-rotating and counter-rotating modes.

Electrical and mechanical preparation for the use of special glue pots for POLYURETHANE glue on machines equipped for EVA.

NC Axis for Fine Trimming Unit
Kit for automatic adjustment of tracing rollers and tool to match edge type and thickness. Adjustment via control system. Pair of multi-profile cutters for fine trimming: bevel 25°, R=2 mm + R=1 mm, and straight profile for solid wood.

NC Axis for Profile Milling Unit
Kit for automatic adjustment of tracer to match edge thickness. Adjustment via control system. Function for processing corners only.

NC Axis for Scraping Unit
Kit for automatic adjustment of tracing rollers and tool to match edge type and thickness. Adjustment via control system.

Skelbimas verčiamas automatiškai, todėl jame gali būtų vertimo klaidų.