Edgebander

BIESSE AKRON 1400

Būklė: naudotas, Gamybos metai: 2015, Funkcionalumas: visiškai funkcionalus, BIESSE Edgebanding Machine AKRON 1440-A Automatic single-sided edgebanding machine for applying and processing straight edges using coil material (melamine, PVC, ABS, veneer) and strip material (solid wood, HPL, sliced veneers, etc.). • NC control with touch display • Automatic start of aggregate motors • Direct selection for second pass • Operating data acquisition • Software-guided maintenance TECHNICAL DATA Workpiece thickness: 10–60 mm Workpiece thickness with MFU aggregate (profile-dependent): 10–35/60 mm Edge height: 14–64 mm Edgebanding thickness (coil): 0.4–3 mm Edgebanding thickness (strip)*: 0.4–10 (12) mm Workpiece overhang: 25 mm Minimum panel length: 140 mm Minimum width (at 140 mm length): 85 mm Minimum width (at 250 mm length): 50 mm Feed speed: 12 m/min Extraction*: 8x port Ø100 mm Compressed air connection: 7 bar Glue pot capacity: approx. 2 kg *Depending on selected aggregates - GLUING UNIT VC-511 Applies hot-melt adhesive to the workpiece, feeds the edge material onto the workpiece, automatically cuts coil material, and presses the edge precisely onto the workpiece, ensuring perfect positioning. Gedoxzb Iiopfx Af Doua - END TRIMMING UNIT IN-801 For trimming the front and rear edge overhangs at 0° to 15° angles. - 2-MOTOR MULTIFUNCTIONAL PROFILE MILLING UNIT AR02 E For corner rounding and profile milling of synthetic material edges up to a maximum thickness of 3 mm. - PRE-MILLING UNIT RT02 Pre-mills the workpiece before adhesive application. Two high-frequency motors, each 1.8 kW, 12,000 rpm. - SCRAPING UNIT RB02 For post-processing thick PVC/ABS edges. - FLAT SCRAPER RC02 Unit for removing excess glue at the joint between edge and panel. Equipped with tracing rollers and a flat knife with electronic engagement. - BUFFING UNIT SZ02 For cleaning and polishing the workpiece edge using fabric buffing wheels. The unit adjusts automatically to the workpiece thickness. - SPRAY SYSTEM FOR ANTI-ADHESIVE AGENT ADZ02 Precision application of anti-adhesive agent via injectors, numerically controlled. - KIT PRO-GLUE The PRO-GLUE kit includes: • TEKNO-GLUE system for optimal adhesive application via: - Controlled glue roller contact. - Automatic retract in case of feed stop. - Automatic ON/OFF of gluing section. • REVERSE system for switching the glue roller between co-rotating and counter-rotating modes. Electrical and mechanical preparation for the use of special glue pots for POLYURETHANE glue on machines equipped for EVA. NC Axis for Fine Trimming Unit Kit for automatic adjustment of tracing rollers and tool to match edge type and thickness. Adjustment via control system. Pair of multi-profile cutters for fine trimming: bevel 25°, R=2 mm + R=1 mm, and straight profile for solid wood. NC Axis for Profile Milling Unit Kit for automatic adjustment of tracer to match edge thickness. Adjustment via control system. Function for processing corners only. NC Axis for Scraping Unit Kit for automatic adjustment of tracing rollers and tool to match edge type and thickness. Adjustment via control system.

Būklė: naudotas, Gamybos metai: 2008, Used Machine Year of Manufacture: 2008 Edge Control system with 18.5" touchscreen color display 16:9 Swiveling control panel, Program memory, Motorized pressure bridge adjustment, Gsdpfx Afov Sv Enj Djua Feed via transport chain, Feed speed 8-18 m/min Extendable workpiece support, Motorized adjustable infeed fence Jointing unit 1961, Diamond jointing cutter for climb and conventional milling, Automatic adjustment to workpiece height Edge feeding unit 1903 Pre-trimming up to 3 x 45 mm (depending on material) Adhesive application system 1905 Multi-System Automatic glue height adjustment with sensing nozzle, Pressure regulator for adjusting the cartridge application pressure, PUR adhesive applicable, Pressure unit 1913 MOT, 1st roller driven Trimming unit 1918 with pneumatic adjustment Trimming saw pneumatically swiveling, Multi-functional unit 1824 MOT 4 with multi-functional cutter radii 1,2,3 mm Corner copying unit 1832 Corner copying function for edge thickness up to 3 mm Radius scraper 1929 MOT 2 With motorized horizontal tracing roller adjustment With pneumatic adjustment (top and bottom separately) Chip collection box for radius scraper, Flat scraper 1964 For scraping off glue residue for a clean glue joint With suction hoods Spraying device 1856 for infeed and outfeed area Buffing unit 1940 For final cleaning and edge polishing ----- Technical Data ----- Edge thickness (coil): 3 mm, Edge thickness (strips): 8 mm, Max. edge thickness corner copying: 3 mm, Workpiece thickness: 45 mm, Workpiece thickness corner copying: 45 mm, Min. workpiece length: 180 mm, Feed speed: 8-18 m/min, Distance workpiece support: 470 mm, Support plate Ø for edge material: 800 mm, Cut-off knife for coiled material up to: 3 mm, Heating-up time: 3.5 min, Jointing cutter power: 2 x 2 kW, Trimming saw power: 2 x 0.22 kW, Milling station power: 2 x 0.35 kW, Corner copying unit power: 0.22 kW, Extraction port jointing unit: 120 mm, Extraction port milling unit: 70 mm, Extraction port scraper unit: 70 mm, Total length: 5,350 mm, Dimensions (LxWxH): 5,350 x 1,669 x 1,940 mm The image of the operating hours is from a recording made in 2022 Availability: short-term Location: Röllbach

Gamybos metai: 1997, būklė: geras (naudotas), • Working width (mm): 1300 • CSD system Gujdpfsidi Ivox Af Dja • Cross sanding unit • Longitudinal sanding unit - shoe • Brush unit • Ionization

Būklė: naudotas, mašinos/transporto priemonės numeris: 007517, Type of edge applied: thin edge, thick edge, solid wood Adhesive system: EVA, hot air Jointing milling unit: yes Multifunction unit: yes Guodpfx Afjwuz E Rs Dea Top milling unit: yes Max. feed rate: 18 m/min Maximum panel thickness: 60 mm Working units: 9 pcs

Būklė: labai geros būklės (naudotas), Gamybos metai: 1995, Max. panel width: 4400 mm Max. panel length: 4300 mm Guodpfxjmt Hhws Af Dja Max. main saw blade projection: 110 mm Number of clamping units: 8

Būklė: labai geros būklės (naudotas), Gamybos metai: 2011, used horizontal panel saw Manufacturer: Holzma Model: PROFI HPL 430/43/22 Year of manufacture: 2011 Gujdeymx S Depfx Af Dsa Cutting length: 4300 mm Cutting width (program pusher travel): 4250 mm Roller rails (2-track elements): 9 pcs Clamping grippers: 7 pcs, first 3 pieces: 2-finger Air cushion table, width: 650 mm, 4 pcs at 2160 mm length Central blower: 1 pc with increased blower capacity – 3 angled-lift clamping grippers (2-finger) – 1 angled-lift clamping gripper (1-finger) – 1st air cushion table: 800 mm wide – Speed package: Saw carriage feed rate 1 – 150 m/min Technical data: Saw blade projection: 95 mm Saw carriage feed: forward 25 m/min, reverse constant 90 m/min Automatic cutting height adjustment Angle alignment device, min. pressing width: 0 mm, max. pressing width: full cutting length Main saw motor: 18 kW, frequency-controlled Scoring saw motor: 2.2 kW Operating voltage: 400 V (+10%/-5%) / 50 Hz Electrical connected load with main saw motor 18 kW: 28 kW Power Control CADmatic 4.0 control system with 17” flat display Labelling with part graphics / label software / label printer PICA 104

Būklė: geras (naudotas), Gamybos metai: 2014, Funkcionalumas: visiškai funkcionalus, System consisting of: PANEL SAW SELCO WNT 610 / 4500 x 2200 mm PC-BASED CONTROL SYSTEM Max. cutting length: 4,500 mm Gsdpfx Aexranpof Dsua Max. saw blade projection (main saw): 95 mm Max. clamp jaw opening: 90 mm Min. panel dimensions from the rear: 1,830 x 915 mm Max. panel dimensions from the rear: 3,100 x 2,200 mm Min. panel thickness for rear feeding: 3 mm Working table height: 985 mm Main saw motor: 15 kW Main saw blade diameter: 380 mm Scoring saw motor: 2.2 kW Scoring saw blade diameter: 200 mm DIGISET: electronic setting of the scorer relative to main saw QUICK CHANGE: rapid blade change at the touch of a button Saw carriage drive: 1 - 140 m/min Integrated side aligner in saw carriage: 0 - 4,200 mm Automatic measurement system for manual cuts Pusher extension from 5,500 to 7,800 mm 10 pneumatic clamps on the pusher with double fingers 3 front aligners 16 support roller rails behind the machine table 4 air-cushion tables in front of the machine table, rounded, including movement mechanism for table 2 Automatic ejection of end pieces beyond the cutting line Material support surface under pusher with brush-lined rollers, suitable for sensitive surfaces Machine table with air nozzles for delicate surfaces Automatic device for monitoring the main saw blade consisting of a sensor that detects blade deflection and a system for measuring the main spindle speed Software package: - QUICKOPTI for cutting pattern optimization directly at the machine - OSI PLUS INTERFACE VERSION - OPTIPLANNING optimization software incl. hardware dongle, permits management of up to 10 users via network - OS LABELLING: graphic editor in the machine control, including drawing of workpieces, real-time label printing at the machine possible - COMMUNICATION STORAGE FEED SYSTEM - SELCO Industrial label printer at the machine STORAGE FEED SYSTEM RBO WINSTORE 2D STANDARD TRAVERSE 8000 MM Rotating suction frame 0 - 180 degrees equipped with controlled axis Panel alignment/squaring system consisting of 3 photoelectric cells mounted on pneumatic cylinders Panel weight detection via load cell installed on the suction frame in the separation area, checks whether the specified weight is within the expected range for this panel type. If not, the panel is set down again and the separation cycle is restarted. Roller conveyor for loading and unloading stacks 4,200 mm Software: LINE SUPERVISOR with storage mapping, catalog, import of processing data from the optimizer, management of parts lists, system control

Būklė: geras (naudotas), BRANDT highflex 1440 Edgebander Well equipped, available for inspection before purchase Pre-milling cutters Glue application unit Pneumatic pre-cutting guillotine Pressure rollers Finishing saws Preliminary top/bottom milling unit 2 x Multifunction trimming/milling units Gsdpfet Hxxpsx Af Doua Profile scraper Flat scraper Polishing unit Machine features NC-controlled milling and pneumatic package Max workpiece height: 60 mm Max edge band thickness in roll: 3 mm Max feed speed: 14 m/min Machine is well-maintained and in very good condition.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2017, Funkcionalumas: visiškai funkcionalus, Naudotas BIESSE Selco WN2 pjūklas - OSI valdymas - Etikečių spausdintuvas - Metai: 2017 - Galimas nuo balandžio - Pjovimo aukštis 60 mm Guedpfeyrr U Nex Af Dja - 1-80 m/min - Greitas pjūklo disko keitimas - 4 oro pagalvės stalai

Būklė: naudotas, mašinos/transporto priemonės numeris: 008365, Pozicija 1: Vienpusė briaunų klijavimo staklės BRANDT - HOMAG-AMBITION 1650 - TFU 140/R/20 Gujdpfxjx Swf Uj Af Dja Pozicija 2: Plokščių grąžinimo įrenginys BRANDT - HOMAG-AMBITION 1650 - TFU 140/R/20