Šoninis krautuvas

Baumann HX50/14/63TR - NEUGERÄT !!! - sofort verfügbar !!!

Sąlyga: naujas, Load capacity: 15,000 kg Length: 10,000 mm Width: 2,450 mm Height: 625 mm Rear axle: steerable Front axle: steerable Tyre dimensions: 425 x 260 mm Machine weight approx. 2.9 t Required space approx. 11.7 x 2.5 x 0.625 m Heavy-duty trailer equipped with: - Double turntable steering - Small turning radius - Tip-over protection thanks to steering angle limiter - Robust design, low maintenance - Interchangeable drawbar, length 1,320 mm Nljdpfxsfrzvle Aduoi - Impregnated wooden platform - Standard paint finish varies. Custom RAL colour available on request. Other load capacities and dimensions available upon request. Please contact us.

Sąlyga: naujas, mašinos/transporto priemonės numeris: wtcs750s,

Sąlyga: naujas, Gamybos metai: 2025, mašinos/transporto priemonės numeris: YBW92020, kuro tipas: dyzelinas, variklių gamintojas: Caterpillar 3516B HD, Paskirtis: Statyba Njdpfx Adon An A Nouoli Savaiminis svoris: 18 290 kg Generatoriaus galia: 2 500 kVA CE žymėjimas: taip Transportavimo matmenys (I x P x A): 6,38x2,29x2,37 Gamybos šalis: DE Dėl daugiau informacijos kreipkitės į Tijmen Pesselse, Kenny Bongers arba Arjen van Dijk.

Sąlyga: naujas, Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus, peilio veleno skersmuo: 160 mm, aliuminio lakšto storis (maks.): 5 mm, ritės svoris: 4 000 kg, maks. lakšto storis: 3 mm, plieno lakšto storis (maks.): 3 mm, vario lakšto storis (maks.): 5 mm, žalvario lakšto storis (maks.): 5 mm, pjovimo greitis: 40 000 mm/min, produkto aukštis (maks.): 3 mm, darbinis plotis: 600 mm, įvesties srovės tipas: trifazis, bendras plotis: 3 500 mm, bendras ilgis: 12 000 mm, bendras aukštis: 2 200 mm, Rulo Sac Dilme Hattı 0,5 - 3 mm Kalınlık x 600 mm Genişlik x 6 Ton Rulo Ağırlığı Galvanizli Topraklama Şeridi üretimi için ideal bir hat. Topraklama şeridi imalatı ve dar bant dilme işlemleri için uygundur. Nedpjtpviqsfx Adujli Detaylı bilgi için lütfen iletişime geçiniz. #rulo #dilme #rulosacdilmehattı #dilmehattı #açıcı #ruloaçıcı #dilme #sarici #gergili #ruloişleme #topraklama #galvanizlitopraklamaseridi #topraklamaseridi #şerit #topraklama

Sąlyga: naujas, Gamybos metai: 2022, Brand new power generator set, consisting of two gensets housed in a single enclosure, based on Scania engines. Synchronisation with other generator sets or units is possible, as well as optional synchronisation with the grid. Maximum output (E.S.P.): 902.0 kVA / 722.0 kW Rated power (P.R.P.): 820.0 kVA / 656.0 kW Controller type: ComAp InteliGen 500 Nodjmrqi Eopfx Aduoli User-friendly, intuitive graphical interface.

Sąlyga: naujas, Gamybos metai: 2025, The ATC plotter series has been designed for professional use in large industrial plants and factories, serving the production of complex large-format components. Thanks to its special construction, the machine is adapted for manufacturing, among other things, foundry models and yachts, significantly reducing processing time. To meet the requirements of heavy-duty machining, ATC machines feature additionally reinforced frames and more powerful AC servo drives on each axis. The presence of five axes supports the processing of even the most demanding components. Plotters in this series are standardly equipped with automatic tool changers, a six-position linear tool magazine, and a tool height sensor. These solutions significantly accelerate processing when multiple milling cutters are required. Materials that can be machined: - Wood - Wood-based materials (chipboard, MDF, OSB, etc.) - Plastics - Composites - PVC - Non-ferrous metals (aluminum, brass, copper, etc.) CONSTRUCTION: The machine frame is made of steel and cast iron, providing high rigidity and resistance to overloads related to the machining process. WORKING AREA: The usable working area of our machine is 3000 x 6000 [mm]. Z-AXIS RANGE AND GANTRY CLEARANCE: Parameters can be tailored to individual customer requirements. DRIVES: Our machines are driven by SERVO motors, ensuring proper acceleration and speed in every direction. The X and Y axes use classic, proven helical racks for durability and precision, while the Z axis is powered by a high-quality ball screw. All axes run on linear rail guides. SPINDLE: A high-class, powerful brushless spindle drives the cutting tool. Spindle speed ranges from 6,000 to 24,000 rpm. A frequency inverter with greater power than the spindle is used for power supply, protecting against speed drops under heavy load. TOOL MAGAZINE: Standard equipment includes a linear tool magazine with six HSK holders. Additional tool magazine positions are available as an option. Nlsdpfxsiq U Tqo Adusi SOFTWARE: The machine is supplied with dedicated CAD/CAM software, enabling fast and easy design of parts, which the program then converts into G-code. Import of ready-made files from other programs is also possible. CONTROL SYSTEM: Operation is managed via a controller equipped with its own processor and operational memory, ensuring stable and reliable performance.

Gamybos metai: 2025, Sąlyga: naujas, Sandblasting cabinet for clean blasting operations without contaminating the work environment. Suitable for various blasting media, e.g. quartz, glass bead, plastic bead, etc. Ideal for cleaning, derusting, or paint removal from all types of metal parts, such as engine components, fittings, signs, housings, rims, and hinges. Njdpecqm Rrjfx Adujli High-quality latex work gloves are securely attached to the housing. Viewing window with protective film ensures optimal visibility and operator safety during part processing. Dust-free operation thanks to peripheral seals on lid and door frames. Sturdy support grid enables placement of workpieces inside the cabinet. With drain opening for changing blasting media. Pickup tube for the blasting media is fixed to the bottom of the collection container. With compressed air connection on the exterior. 2 large side doors enable loading and unloading from both sides, suitable for longer workpieces. Integrated extraction unit with replaceable air filter. Airflow is controlled via foot pedal. 2 blasting guns: one fixed and one free-moving blasting gun. 3 separate switches for on/off, extraction, and cabin lighting. 2 fluorescent tubes (230 Volt), in a separate housing with protective cover and replaceable protective film, including 5 spare films. Operating pressure adjustable via pressure regulator with manometer. Scope of delivery: High-quality blasting gun with ceramic nozzle 4 ceramic nozzles (4 / 5 / 6 / 7 mm) 5 spare protective films for the viewing window Technical Data: Cabinet volume: 310 l Air consumption: 200 – 350 l/min Operating pressure: 2.8 – 8.0 bar Compressed air connection: 3/8" Abrasive grit size: 0.42 – 0.125 mm Internal dimensions: 945 x 605 x 605 mm External dimensions: 960 x 900 x 1640 mm Weight: Max. operating pressure: 8.6 bar Location: Expected in stock at 54634 Bitburg

Sąlyga: naujas, Gamybos metai: 2025, Einführung der Backenbrecheranlage Die Kapazität variiert je nach Kundenwunsch. Um den unterschiedlichen Anforderungen der Kunden gerecht zu werden, kann die Produktionslinie mit einem Kegelbrecher, Entstaubungsanlagen und weiterer Ausrüstung ausgestattet werden. Sie eignet sich für Materialien wie Hartkalkstein, Granit, Basalt, Kiesel, Metallschlacke sowie für die Herstellung von Kunstsand. Die Anlage wird in den Bereichen Wasserkraft, Baustoffe, Straßen- und Städtebau vielfach eingesetzt. Je nach technologischem Bedarf lassen sich verschiedene Gerätetypen flexibel kombinieren, um die Ansprüche unterschiedlicher Kunden zu erfüllen. Produktvorteile der Steinbrecheranlage 1. Hohe Zuverlässigkeit und gute Stabilität 2. Wartungsfreundlich und einfach zu bedienen 3. Niedrige Betriebskosten und breites Anwendungsspektrum 4. Laminierte Brechtechnik sorgt für eine optimale Kornform im Endprodukt Wir bieten auch weitere Lösungen zur Steinzerkleinerung an, wie zum Beispiel: 1. Vibrationsförderer + Backenbrecher + Feinbackenbrecher + Vibrationssieb 2. Vibrationsförderer + Backenbrecher + Prallbrecher + Vibrationssieb Njdpfx Asq Nyy Ejdueli 3. Vibrationsförderer + Schwerer Hammerbrecher + Vibrationssieb 4. Sandproduktionslinie 5. Kies-/Schotter-Produktionslinie Ein Steinbrecherwerk zur Sand- und Schotterproduktion umfasst mehrere Prozessstufen und Ausrüstungen. Hier eine Übersicht des Ablaufs sowie der wichtigsten Komponenten: Prozessüberblick 1. Vorzerkleinerung: Großformatige Steine aus dem Steinbruch werden in den Backenbrecher gegeben und auf handhabbare Größen reduziert. 2. Sekundärzerkleinerung: Das Produkt des Vorbrechers wird in einem Sekundärbrecher – meist ein Kegel- oder Prallbrecher – weiter zerkleinert. 3. Siebung: Das zuvor gebrochene Material wird auf Vibrationssieben in verschiedene Korngrößen getrennt. Überkorn gelangt zur erneuten Zerkleinerung zurück in die Brecher. 4. Sandherstellung: Für die Sandproduktion wird das Material durch eine Sandherstellungsmaschine (z.B. Vertikalprallbrecher) auf die gewünschte Korngröße und Form gebracht. 5. Waschen: Das Endprodukt wird häufig gewaschen, um Verunreinigungen zu entfernen und die Qualität des Zuschlags zu verbessern. 6. Haldenlagerung: Das fertige Produkt wird in Halden gelagert, bis es zum Kunden transportiert wird. Hauptkomponenten der Steinbrecheranlage 1. Backenbrecher: Für die Primärzerkleinerung großer Steine. 2. Kegel- oder Prallbrecher: Für die Sekundärzerkleinerung und die Herstellung feinerer Fraktionen. 3. Vibrationssieb: Zur Trennung gebrochener Materialien nach Korngröße. 4. Sandherstellungsmaschine: Spezielles Gerät zur Sandproduktion. 5. Gurtförderer: Transportiert das Material zwischen den verschiedenen Verfahrensstufen. 6. Vibrationsförderer: Führt das Rohmaterial gleichmäßig und kontinuierlich den Brechern zu. 7. Sandwaschanlage: Entfernt Verunreinigungen aus dem Sand. 8. Steuerungssystem: Überwacht und kontrolliert den gesamten Prozess für einen effizienten und sicheren Betrieb. Die Umsetzung einer professionell konzipierten Steinbrecheranlage erhöht die Produktionseffizienz erheblich und gewährleistet hochwertige Sand- und Zuschlagstoffe.

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, galia: 17,65 kW (24,00 AG), kuro tipas: benzinas, darbinė masė: 600 kg, Gamybos metai: 2020, veikimo valandos: 200 h, AGRIA 9600 - 112 !!! 2nd Generation - New Model !!! Remote-controlled mowing crawler with 112 cm rotary mulching deck This AGRIA 9600-112 mowing crawler was manufactured in 2020, used as a demonstration unit, has approximately 200 operating hours according to the meter, and is in overall excellent condition with only minor signs of use and wear. The current recommended retail price is €44,900. - Net price: €25,125 // Gross price: €29,900 Nljdpfx Adsu T N Rnousi - Viewing and test drive welcome! - Nationwide shipping available for €400 via freight forwarder! - Financing/leasing options can be arranged individually for you.

Gamybos metai: 2020, Sąlyga: naujas, Transport systems Depending on customer requirements, transport systems can either move along the floor or be suspended from rails. - For convenient manual installation solutions, we recommend suspended cross beams (transverse conveyors). - In automated systems, chain conveyors are most commonly used. These do not stop and present an excellent solution for companies focused on process quality and repeatability. - For companies producing different items simultaneously, for example with several booths using different colours, flexible solutions based on non-powered conveyors are used. This is the most expensive option. All installations are custom-built based on customer specifications. Continuous overhead chain conveyor systems are designed and manufactured according to individual client orders. It is also possible with this system to produce floor conveyor systems on which items such as flowerpots or rims (see photo) can be arranged. ROMER also produces overhead transport systems. Nlodsfz I D Dopfx Aduoi Cross beams (transverse conveyors) are designed and manufactured for the requirements of specific installations. Use of photoelectric cells Using a photoelectric cell in the product area allows you to measure the length and thus gives the option to activate the guns as soon as the item is within their range, and to switch them off immediately after coating. The photoelectric cell is standard equipment. Identification of items using special markings. Above the carrier loop, there are panels with identification holes. Based on this, the PLC controller, in conjunction with the photoelectric cell, recognises the coated item and switches the guns on and off at the correct time – saving energy and powder coating material. Vertical shape detection. By using light barriers with horizontal sensors, the PLC control can analyse the vertical shape of a part. The PLC tracks the time at which the part should appear in the gun area—this allows for selective activation/deactivation of the guns. With light gates equipped with multiple sensors positioned both horizontally and vertically, this solution enables precise measurement of the workpiece’s dimensions, which also allows for the control of manipulators.