Bütfering Classic 111 C Plačiajuostis ryšys

BÜTFERING Classic 111 C

Būklė: naudotas, Gamybos metai: 2000, Working width: .- mm Equipped with 1 sanding unit consisting of: - Combination unit with electronic pad for lacquer sanding - Lacquer sanding - Dust brush - Roller table at infeed, 270 mm - Electronic program control for 50 programs Machine overhauled Bsdpfxjvwfl Us Ac Djwn with brand-new feed belt Valves and filter pressure regulators replaced Machine fully adjusted Test sanding performed Used Make: Bütfering Model: Classic 111 C Year of manufacture: 2000 Machine no.: 63608 Working width: 1,100 mm Pass-through height: 160 mm CE type-tested GS wood dust tested Belt dimensions: 1,120 mm x 1,900 mm Feed speed: 4 + 8 m/min 1 combination unit, 3.7/7.5+15 kW, 3 belt speeds with automatic adjustment via control panel Steel roller Diameter: 130 mm Belt speeds: approx. 4.5 + 9 + 18 m/s Electronic segmented shoe Segment pitch: 50 mm for lacquer sanding, workpiece controlled Location: 97447 Gerolzhofen, free loaded, unpacked Delivery in as-inspected condition, without warranty or guarantee.

Būklė: naudotas, Gamybos metai: 2000, with electric height and tilt adjustment Used, top condition, low operating hours Manufacturer: Altendorf Model: F45 Year of manufacture: 2000 Machine no.: GS-certified Motor: 4 kW Steel guides Carriage length: approx. 3000 mm Cutting width: approx. 1050 mm Tiltable up to 45° Scoring unit preparation Parallelogram guard Bwjdpfjvxlq Hjx Ac Don Table extension Aluminium parts anodised Height adjustment: electric Tilt adjustment: electric Digital display: - Cutting angle - Speed Extraction port: D 120/80 mm Required space: approx. 3010 mm x 1800 mm x 1500 mm Weight: approx. 1000 kg Location: 97447 Gerolzhofen, free loaded, unpacked Delivery in as-inspected condition, without warranty or guarantee

Būklė: naudotas, Gamybos metai: 2006, Numerical control XP 600 X-axis working area: 3060 mm Y-axis working area: 1140 mm Z-axis working area: 160 mm Number of working zones: 2 Bar worktable 6 adjustable support bars for suction cup positioning Bodev Aacfjpfx Ac Dewn Number of pneumatic bakelite rods for panel lifting (?): 2 2 adjustable suction cups per bar with vacuum seal to secure the panel during machining 1 vertical electrospindle with C-axis, 12 kW motor Tool change system with 10 positions – located at the drill head, cone type ISO 30 BH19L boring head with 18 spindles arranged as follows: - 7 vertical on the X-axis - 6 vertical on the Y-axis - 4 horizontal on the X-axis - 2 horizontal on the Y-axis - 1 independent saw unit for grooving along the X-axis Front photocell protection and safety system Automatic lubrication system (?) Climate system for cooling and cleaning the machine control unit Vacuum pump: 250 m³/h TECHNICAL DETAILS TO BE VERIFIED

Būklė: naudotas, Gamybos metai: 2008, mašinos/transporto priemonės numeris: 0-411-49-1873, Technical Data: - Manufacturer: Bütfering - Model: Optimat SGO 211/RC - Number of sanding units: 2 - Year of manufacture: 2008 - Working width: 1,100 mm - Sanding belt width: 1,120 mm - Sanding belt length: 1,900 mm - Workpiece thickness: 3–160 mm - Feed speed: 2.5–13 m/min - Weight: 1,800 kg - Table height adjustment Standard Equipment: - Automatic workpiece thickness adjustment - Infinitely variable feed speed via frequency converter - Up to 125 sanding programs can be stored - Wear-free braking device 1st Sanding Unit (R) - Calibration drum Bodpfx Acoyh Hwus Djwn - Profiled steel contact roller - Diameter: 160 mm - Drive motor: 15 kW 2nd Sanding Unit (C) - Combination unit with roller and sanding shoe - Rubberized contact roller 65 Shore - Contact roller diameter: 160 mm - Electronic segmented pressure bar with 35 mm segment width - Belt speed: 12 and 21 m/s - Tolerance compensation up to 1 mm - Suitable for veneered surfaces and solid wood - Drive motor: 11 kW - Total connected load: approx. 28 kW - Operating voltage: 400 V / 50 Hz - Compressed air consumption at 6 bar: 20 L/min - Belt blow-off device per impulse: 440 L/min - Extraction volume: approx. 2,880 m³/h at 20 m/s - Extraction connections: 1 x Ø 160 mm (sanding unit, roller) 1 x Ø 160 mm (sanding unit, shoe) Dimensions: - Length: 1,700 mm - Width: 1,850 mm - Height: 2,100 mm - Location: not in stock - Available from April 2026

Būklė: labai geros būklės (naudotas), Gamybos metai: 1996, Wide Belt Sander OTT ALPHA 110 - Machine in stock - After technical inspection - In very good condition - German production Bwjdpfxjgi Drys Ac Dsn - Year of manufacture: 1996 - Segmental pad – ideal solution for lacquer / veneer TECHNICAL SPECIFICATIONS: - Working width: 1100 mm - Working height: 1-150 mm - Combination unit with membrane sanding pad, task-controlled - Main unit motor power: 11 kW - Air blow on sanding belt - Pneumatic belt oscillation - Two belt speeds: 4.5 and 18 m/s - Felt roller unit - Motor power: 0.75 kW - Roller oscillation - Cleaning brush unit - Motor power: 0.75 kW - Continuously adjustable feed - Feed speed range: 4-18 m/min - Feed drive motor power: 1.5 kW - Electric height adjustment - Vacuum table - Fan motor power: 3 kW - Extraction ports diameter: 4 x 120 mm, 1 x 150 mm Transport dimensions: - Length: 200 cm - Width: 245 cm - Height: 210 cm - Weight: 2500 kg 1. Alpha Combi Unit is a sanding unit with a 150 mm diameter contact roller, 90 shore hardness. Integrated with a sectional pneumatic pad, section width: 27 mm. 2. EMS 27 Optical System – detects minimal irregularities and adjusts the pressure of each pad section to the corresponding area of the workpiece. 3. Control of respective adjacent pad sections is possible within the range -2 to +4.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2008, Working width: 1100 mm Workpiece thickness: 3 – 160 mm Abrasive belt dimensions: 1,120 x 1,900 mm Variable feed speed: 2.6 – 13 m/min Feed motor power: 1.10 kW, 400 V, 50 Hz Extraction port diameter: 2 x 160 mm Compressed air supply: 6 bar Dimensions (L x W x H): 1705 x 1545 x 1905 mm 1st Unit: Steel contact roller, Ø 160 mm Motor power: 15 kW, 400 V, 50 Hz 2nd Unit: Combination unit, rubber-coated contact roller, 65 Shore, rigid sanding platen Motor power: 11 kW, 400 V, 50 Hz Abrasive belt cleaning via compressed air 3rd Unit: Cleaning brush Multifunction display Multifunction lever (conveyor belt, workpiece thickness adjustment) Electronic abrasive belt oscillation Conveyor carpet oscillation, pneumatic Motorized workpiece thickness adjustment with LED display in 0.1 mm increments Bwjdpfxoychqzj Ac Djn Units equipped with emergency stop device Emergency stop button at infeed & outfeed Motor protection switch Roller table extension at infeed with 2 loose rollers Automatic star/delta starting Complete documentation Note on used machines: • Subject to errors in technical data and prior sale. • Prices quoted are ex-works, loaded free of charge! • The machines have been cleaned and function-tested. • All machines are sold as seen, with no warranty whatsoever. Buyers are welcome to inspect the machines at the location. • Special agreements are only valid in writing. (Inquiries will only be answered with your address and telephone number!)

Būklė: labai geros būklės (naudotas), COSTA LEVIGATRICI Series S model SN with 5 units First unit: electronically segmented crossbelt Second unit: roller 1 Third unit: roller 1 Fourth unit: electronically segmented super-finishing pad Fifth unit: electronically segmented crossbelt Working width: 1350 mm Bwjdpfx Aor Iyvmoc Dsn Vacuum system Inverters on all belt units Inverter on feed belt Exit brush unit Exit blower unit

Būklė: naujas, Papildomas oro kompresorius yra reikalingas, kad azoto generatorius galėtų gaminti azotą. Azoto grynumas: 99.999% Įėjimo slėgis: 8 bar Išėjimo slėgis: 7 bar Galia: 75 W (galia nurodo vienos valandos azoto gamybos elektros sąnaudas) 3 viename dizainas: nereikia papildomo oro kompresoriaus, šaldytuvo ar džiovintuvo Bwodpfx Acoxfrv Es Djn Švarios dujos Kaina EXW (sandėlys Europoje), įskaitant užkrovimą ant sunkvežimio. Transportas, montavimas, paleidimas, apmokymai ir metinė priežiūra prieinamos pagal užklausą už papildomą mokestį. Montavimą ir apmokymus visuomet atlieka mūsų aukštos kvalifikacijos aptarnavimo komanda trijose Europos vietose: Nyderlandai, Vokietija, Rumunija. Oficialus pardavėjas: CNC Top Ten bv Coevorden, Nyderlandai

Būklė: naudotas, Gamybos metai: 1997, veikimo valandos: 10 227 h, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 600 mm, Y ašies eiga: 525 mm, Z ašies eigos atstumas: 500 mm, stalo plotis: 540 mm, stalo ilgis: 1 000 mm, bendras svoris: 4 500 kg, veleno greitis (maks.): 12 000 aps./min, For sale is a machining centre from Deckel Maho, model DMU 60 E. The machine is fully functional and ready for immediate use. The low program run hours are a particular highlight. Technical data: Bjdpfow I R I Hsx Ac Down Year of manufacture (estimated): 1997 Control: HEIDENHAIN TNC 426PB Control on: 8,283 h Machine on: 31,148 h Program run: 10,227 h Total power requirement: approx. 26 kVA Travel X-axis: 600 mm Travel Y-axis: 525 mm Travel Z-axis: 500 mm Clamping surface: 1,000 x 540 mm Maximum table load: 350 kg Spindle speed range: 20 - 12,000 rpm Tool holder: SK 40 Feed rate: 20 - 10,000 mm/min Rapid traverse X/Y-axis: 18 m/min Rapid traverse Z-axis: 15 m/min Tool changer: 25 stations Dimensions (L x W x H): approx. 2.95 x 2.1 x 2.26 m Weight: approx. 4,500 kg Transport and loading can be organised throughout Europe on request and at extra cost. All prices are subject to VAT. Inspection is possible by appointment. Please contact us—our team is happy to assist you. Trade-in or exchange is possible! Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or would you like to sell yours? For further information or to get in touch, please visit our website.

Būklė: geras (naudotas), Gamybos metai: 2006, CNC Multitron PS 10 Control: Column-guided Material roller conveyor on both sides 4000 mm / 1000 mm Cutting speed 15 - 105 m / min Technical details: Cutting diameter: 320 mm Bedpfx Acev I Rfue Djwn Saw band length: 3280 mm Cutting width: 320 mm Total power requirement: 3.8 kW Machine weight: approx. 115 kg