Padėklų vyniotuvas StretchWrapper

ATLANTA SYNTHESI

Gamybos metai: 2025, Sąlyga: beveik kaip naujas (parodų įrenginys), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: S25Synthesi01, Stretch Wrapper Synthesi TECHNICAL DETAILS Turntable / Base Frame / Ø 2,200 mm Max. pallet size: 1,550 x 1,550 mm Max. load capacity: 2,000 kg Wrapping height (including pallet): 2,200 mm FILM CARRIAGE TYPE “OPRS - ONE PRE STRETCH” Pre-stretch ratio set to 200% Film application tension electronically adjustable in the programs in various steps Turntable height 75 mm Height detection via photoelectric sensor Frequency-controlled turntable drive (soft start - start/stop) Frequency-controlled carriage speed upwards/downwards Acoustic signal at wrapping start and at cycle end Fsdpfov Npx Nex Acujpn Emergency stop switch according to CE regulations Turntable always stops at the same starting position Anti-fall device for the film carriage Push button for machine power-on, start & stop function, and reset per CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON CONTROL PANEL All function parameters adjustable via display F00 - Display/program lock F02 - Continuously variable turntable speed 5-12 rpm Carriage travel speed upwards and downwards adjustable independently F03 - Carriage travel speed upwards from 1.3 to 5.4 m/min F04 - Carriage travel speed downwards from 1.3 to 5.4 m/min F05 - Number of wraps at pallet base (1 - 10 wraps) F06 - Number of wraps at pallet top (1 - 10 wraps) F09 - Photoelectric cell delay for wrapping height F13 - F16 - Film application tension for bottom & top wraps / ascent & descent adjustable independently F62 - Ergonomic height for film change Film consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON CONTROL PANEL 6 programmable wrapping cycles F01 - 1 - Cross wrapping (upwards/downwards) F01 - 2 - Single wrapping (upwards only or downwards only) F01 - 3 - Push button for manual functions F10 - F11 - Wrapping cycle with predefined start and stop height F12 - Wrapping to a preset height (disables height detection photoeye) F22 / F23 - Wrapping cycle for top sheet application F29 - Soft start cycle for corner protection F30 - F31 - Wrapping cycle with reinforcement and adjustable number of wraps Soft start to reduce film tearing on sharp pallet corners Wrapping cycle with manual or motorized rope forming (optional) Reinforcement cycle via push button Optional: Turntable size up to Ø2,600 mm Mast height up to 3,900 mm Ramp Mounting frame Photoelectric sensor for dark products Film cutting device etc. Further systems available ex-stock Ludwigsburg. Images may contain optional extras subject to surcharge. Image similar

Gamybos metai: 2016, Sąlyga: labai geros būklės (naudotas), Parduodama Atlanta avvolgitore Synthesi 2016 m. pagriežamas padėklų vyniotuvo stalas. Įranga geros būklės, pilnai veikianti. Papildomai galima pristatyti su užvažiavimo rampa. Kaina su užvažiavimo rampa – 2550 €. Taip pat turime daugiau (robotizuotų) vyniotuvų. Pasiteiraukite apie galimus įrenginius. Fpjdpoxcb Hzefx Acusn Dėl išsamesnės informacijos drąsiai kreipkitės žinute. Darbo įrangos video galiu atsiųsti per whatsapp. Taip pat tiekiame vyniojimo plėvelę. Dėl informacijos prašome kreiptis. Galime priimti kompaniją už jūsų (net ir neveikiantį) padėklų vyniotuvą. Žiūrėkite ir kitus mano skelbimus. Plėvelės vyniotuvas, padėklų vyniotuvas, vyniojimo mašina, robotizuotas vyniotuvas, plėvelė.

Gamybos metai: 2025, veikimo valandos: 1 h, Sąlyga: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: S23SynthesiWaage02, Exhibition machine, like new. SYNTHESI with integrated scale Pallet weighing system integrated into the machine FILM CARRIAGE TYPE “FE” (ELECTROMAGNETIC BRAKE) Film feed tension electronically controlled via control unit Film specification: max. external diameter Ø250 mm – height = 500 mm - core Ø76mm Standard electrical connection: 230 V - 1PH+N+PE - 50/60 Hz Options available: Ramp OPRS film carriage with 200% pre-stretch Turntable 1650 mm Wrapping height up to 3500 mm TECHNICAL DETAILS: Turntable 1500 mm (optionally 1650 mm) Wrapping height (including pallet): 2,200 mm Height detection via photoelectric sensor Frequency-controlled turntable drive (soft start - start/stop) Frequency-controlled carriage lift speed up/down Acoustic signal at start and end of wrapping cycle Emergency stop switch in accordance with CE regulations Turntable always stops in the same starting position Anti-fall device for film carriage Push buttons for machine ON, start & stop function & reset as per CE standards Ø 22 mm ADJUSTABLE PARAMETERS VIA CONTROL PANEL All functional parameters adjustable via display F00 - Display lock for program changes F02 - Continuously adjustable turntable speed 5-12 rpm Carriage lift speed up and down can be set independently F03 - Lift carriage speed upwards from 1.3 to 5.4 m/min F04 - Lift carriage speed downwards from 1.3 to 5.4 m/min Fpjdpfxewtc Dls Acuen F05 - Number of wrapping turns at pallet base (1 - 10 wraps) F06 - Number of wrapping turns at pallet top (1 - 10 wraps) F09 - Delay for photocell wrapping height F13 - F16 - Film feed tension at base & top wrap / ascent & descent independently adjustable F62 - Ergonomic height for film change Film consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS VIA CONTROL PANEL 6 storable wrapping programs F01 - 1 - Cross wrap (upwards/downwards) F01 - 2 - Simple wrap (upwards or downwards only) F01 - 3 - Push button for manual functions F10 - F11 - Wrapping cycle with preset start and stop height F12 - Wrapping to a memorized height (disabling photo eye for height) F22 / F23 - Wrapping cycle for top sheet film F29 - Soft-start cycle for application of edge protection F30 - F31 - Wrapping cycle with reinforcement and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Wrapping cycle with manual or motorized rope formation (optional) Reinforcement cycle via push button Further units available ex stock Ludwigsburg.

Gamybos metai: 2025, Sąlyga: beveik kaip naujas (parodų įrenginys), mašinos/transporto priemonės numeris: S23Synthesi01,

Gamybos metai: 2024, Sąlyga: beveik kaip naujas (parodų įrenginys), mašinos/transporto priemonės numeris: S23SynthesiLow05, Exhibition machine, like new. SYNTHESI with a flat turntable Turntable height: 25 mm Short ramp: 500 mm long Fsdpfx Acsv Iqt Ejuopn TECHNICAL DETAILS: LOW PROFILE turntable · Height: 25 mm · Max. pallet dimensions: 1000 x 1200 mm · Max. load capacity: 1200 kg · Ramp included Wrapping height (including pallet): 2,200 mm Height detection via photoelectric sensor Frequency-controlled turntable drive (soft start - start/stop) Frequency-controlled carriage speed up/down Acoustic signal at the start of wrapping and at the end of the cycle Emergency stop switch in accordance with CE regulations Turntable always stops in the same home position Fall protection for the film carriage Pushbutton for machine power-on as well as start & stop function & reset in accordance with CE standards Ø 22 mm ADJUSTABLE PARAMETERS AT THE CONTROL PANEL All functional parameters adjustable via display F00 - Display lock for program changes F02 - Infinitely variable turntable speed 5-12 rpm Carriage speed up and down can be set independently F03 - Carriage speed up from 1.3 to 5.4 m/min F04 - Carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps at the pallet base (1 - 10 wraps) F06 - Number of wraps at the pallet top (1 - 10 wraps) F09 - Photo sensor delay for wrap height F13 - F16 - Film tension for base & top wrapping / ascent & descent, independently adjustable F62 - Ergonomic height for film change Film consumption display (optional) ADJUSTABLE WRAP PROGRAMS AT THE CONTROL PANEL 6 storable wrapping programs F01 - 1 - Cross wrap (upwards/downwards) F01 - 2 - Simple wrap (upwards only or downwards only) F01 - 3 - Pushbutton for manual functions F10 - F11 - Wrapping cycle with pre-set start and stop height F12 - Wrapping to a stored height (disabling light sensor for height) F22 / F23 - Wrapping cycle for top sheet film F29 - Soft start cycle for applying edge protection F30 - F31 - Wrapping cycle with reinforcement and adjustable number of wraps Soft start to reduce film tearing at sharp pallet edges Wrapping cycle with manual or motorized rope formation (optional) Reinforcement cycle via pushbutton FILM CARRIAGE TYPE “OPRS - ONE PRE STRETCH" Film pre-stretch ratio set to 200% Film tension electronically controlled via control unit Film specifications: max. outer diameter Ø250 mm – height = 500 mm – core Ø76 mm Standard connection values: 230 V - 1PH+N+PE - 50/60 Hz Total power: 1.2 kW / 8A Optional: Gears for OPRS pre-stretch ratio of 150% / 250% / 300% available Further machines available from stock in Ludwigsburg.

Gamybos metai: 2023, Sąlyga: beveik kaip naujas (parodų įrenginys), mašinos/transporto priemonės numeris: S23SynthesiLow04, Demonstration machine, as new. SYNTHESI with a flat turntable Turntable height: 25 mm Short ramp: 500 mm long Manual rope formation at the pallet, mounted to the frame, for reinforcement of the wrapping TECHNICAL DETAILS: Turntable LOW PROFILE · Height: 25 mm · Max. pallet dimensions: 1000 x 1200 mm · Max. load capacity: 1200 kg · One ramp included Wrapping height (including pallet): 2,200 mm Height sensing via photoelectric sensor Frequency-controlled turntable drive (soft start - start/stop) Frequency-controlled carriage speed, independent adjustment for up and down movement Acoustic signal at start of wrapping and end of cycle Emergency stop switch according to CE regulations Turntable always stops at the same start position Anti-fall protection for the film carriage Push buttons for machine power, start & stop function, and reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON CONTROL PANEL All functional parameters adjustable via display F00 – Display lock for program modification F02 – Infinitely variable turntable speed 5–12 rpm Carriage speed upward and downward independently adjustable F03 – Carriage speed upward: 1.3 to 5.4 m/min F04 – Carriage speed downward: 1.3 to 5.4 m/min F05 – Number of wraps at pallet foot (1–10 wraps) F06 – Number of wraps at pallet top (1–10 wraps) Fpedpfx Ajv Iqucecuen F09 – Photoelectric sensor delay for wrapping height F13–F16 – Film tension for foot & head wrapping / upward & downward individually adjustable F62 – Ergonomic height for film change Film consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON CONTROL PANEL 6 storable wrapping programs F01–1 – Cross wrapping (up/down) F01–2 – Single wrapping (only up or only down) F01–3 – Push button for manual functions F10–F11 – Wrapping cycle with specified start and stop height F12 – Wrapping to a preset height (with photoelectric height sensor deactivated) F22 / F23 – Wrapping cycle for top sheet application F29 – Soft start cycle for attaching edge protection F30–F31 – Wrapping cycle with reinforcement and adjustable number of wraps Soft start to reduce film tearing on sharp pallet edges Wrapping cycle with manual or motor-driven rope formation (optional) Reinforcement cycle activated by push button FILM CARRIAGE TYPE “OPRS - ONE PRE STRETCH” Film pre-stretch ratio set to 200% Film lay-on tension electronically controlled via control unit Film specifications: Max. outer diameter Ø250 mm – Height = 500 mm – Core Ø76 mm Standard connection data: 230 V – 1PH+N+PE – 50/60 Hz Total power: 1.2 kW / 8A Optional: Sprocket for OPRS pre-stretch ratio 150% / 250% / 300% possible Additional systems available from Ludwigsburg stock.